S S S y y y l l l l l l a a a b b b u u u s s s Second Year B.Tech. Electronics & Communication Engineering Charotar University of Science & Technology Faculty of Technology & Engineering Department of Electronics & Comm. Engineering Effective From: 2011‐12 Authored by: Charusat
38
Embed
Syllabus - CHARUSAT · Syllabus SecondYear B.Tech ... 5. Combinational Logic With MSI AND LSI 07 6. Sequential Logic 15 7. Registers, Counters and the …
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SSSyyyllllllaaabbbuuusss
Second Year B.Tech.Electronics & Communication Engineering
Charotar University of Science & Technology
Faculty of Technology & Engineering
Department of Electronics & Comm. Engineering
Effective From: 2011‐12Authored by: Charusat
Theory Practical Total Internal External Internal External
EC210 Analog Communication 4 2 6 5 30 70 25 25 150
EM201.01 Fundamentals of Management 4 4 4 30 70 100
Assignment Practice 2
Student Counselling 2
24 8 36 28 180 420 100 100 800
SY S
EM
4
Contact Hrs.
SY S
EM
3
Course title
Teaching Scheme
TotalPracticalSem Course CodeCredits
Theory
Examination Scheme
CHAROTAR UNIVERSITY OF SCIENCE & TECHNOLOGY (CHARUSAT)TEACHING & EXAMINATION SCHEME FOR B TECH ELECTRONICS & COMMUNICATION ENGINEERING
B. Tech. (Electronics & Communication Engineering) Programme
SYLLABI (Semester – 3)
CHAROTAR UNIVERSITY OF SCIENCE AND TECHNOLOGY
CHAROTAR UNIVERSITY OF SCIENCE & TECHNOLOGY
FACULTY OF TECHNOLOGY & ENGINEERING V. T. PATEL DEPARTMENT OF ELECTRONICS & COMMUNICATION
ENGINEERING
B. TECH. (ELECTRONICS & COMMUNICATION)
2ND YEAR SEMESTER: III
EC 201: DIGITAL ELECTRONICS & LOGIC DESIGN ______________________________________________________________________
Credit Hours: Teaching Scheme Theory Practical Total Credit
Hours/week 4 2 6 5
Marks 100 50 150
A. Objective of the Course: This course will introduce the students about fundamentals of digital electronics including number systems, Boolean algebra and logic gates, combinational logic, designing of combinational and sequential circuits.
A. Out line of the Course:
Sr.
No.
Title of the Unit Minimum Number of
Hours
1. Number Systems 03
2. Boolean Algebra and Logic Gates 06
3. Simplification of Boolean Functions 06
4. Combinational Logic 08
5. Combinational Logic With MSI AND LSI 07 6. Sequential Logic 15 7. Registers, Counters and the Memory Unit 15
Total Hours (Theory):60
Total Hours (Lab): 30
Total Hours:90
A. Detailed Syllabus: 1. Number Systems 3 Hrs 5%
1.1 Digital Computer And Digital Systems, Binary Number, Number Base Conversion Octal And Hexadecimal Number
FACULTY OF TECHNOLOGY & ENGINEERING V. T. PATEL DEPARTMENT OF ELECTRONICS & COMMUNICATION
ENGINEERING
B. TECH. (ELECTRONICS & COMMUNICATION)
2ND YEAR SEMESTER: III
EC 202: NETWORK THEORY ______________________________________________________________________
Credit Hours: Teaching Scheme Theory Practical Total Credit
Hours/week 4 2 6 5
Marks 100 50 150
A. Objective of the Course: The objective of the course is to introduce the student to the study fundamentals of Network theory including its concepts, initial and final condition of components, transient ant steady state response , network theorems, two-port network, state space variable analysis, With this they will have the knowledge of how to evaluate any complex network . B. Out line of the Course: Sr.
No.
Title of the Unit Minimum Number of
Hours
1. Basic of Concept and Network Representation 03
2. Basic of Concept and Network Representation 06
3. Time Domain Analysis 10
4. Frequency Domain Analysis 08
5. Impedance Functions and Network Theorems & Network
C. Detailed Syllabus: 1. Basic Of Concept And Network Representation 3Hrs 5%
1.1 Introduction 1 Hr
1.2 Analysis ,Convention ,Synthesis 1 Hr
1.3 Types of Network 1 Hr
2. Formulation And Transformation 6Hrs 10%
2.1 Kirchoff's Law, The Number of Network Equations, Source Transformations
2 Hrs
2.2 Examples of The Formulations of Networks, Loop Variable Analysis, Node Variable Analysis
3 Hrs
2.3 Determinants: Minors and The Gaus Method, Duality, State Variable Analysis
1 Hr
3. Time Domain Analysis 10Hrs
10%
3.1 Initial Conditions in Networks Differential Equations 2 Hrs
3.2 Second-Order Equation 2 Hrs
3.3 Internal Excitation 2 Hrs
3.4 Networks Excited by External Energy Sources Response As Related To The S-Plane Location of Roots
4 Hrs
4. Frequency Domain Analysis 8Hrs
12%
4.1 Introduction, The Laplace Transformation ,Some Basic Theorems For The Laplace Transformation, Examples of The Solution of Problems With The Laplace
2 Hrs
4.2 Transformation ,Partial Fraction Expansion , Heaviside's Expansion Theorem, Examples of Solution By The Laplace Transformation
2 Hrs
4.3 The Shifted Unit Step Function, The Ramp And Impulse Functions, Waveform Synthesis The Initial And Final Value of F (T) From F (S)
4 Hrs
5. Impedance Functions And Network Theorems & Network Functions: Poles And Zeros 4Hrs
11%
5.1 The Concept of Complex Frequency Transform Impedance And Transforms Circuits Series and Parallel Combinations of Elements
1 Hr
5.2 Superposition And Reciprocity Thevenin's Theorem And Norton's Theorem 1 Hr
5.3 Terminal Pairs or Port Network Functions For The one Port And Two Port, The Calculation of Network Functions Ladder Networkgeneral Networks
1 Hr
5.4 Poles And Zeros of Network Functions ,Restrictions on Pole And Zero Locations For Transfer Functions
1 Hr
6. Two Port Parameters 15Hrs 22%
6.1 Relationship of Two-Port Variables, Short-Circuit Admittance Parameters 4 Hrs
6.2 The Open Circuit Impedance Parameters, Transmission Parameters 5 Hrs
6.3 The Hybrid Parameters, Relationships Between Parameters Sets, Parallel Connections of Two-Port Networks
6 Hrs
7. Sinusoidal Steady -State Analysis 11Hrs 23%
7.1 The Sinusoidal Steady State 3 Hrs
7.2 The Sinusoidal And E +- Jwt, Solution Using E +- Jwt ,Solution Using E +- Jwt or Im E +- Jwt
5 Hrs
7.3 Phasors and Phasor Diagrams 3 Hrs
8. Frequency Response Plots 3Hrs 7%
8.1 Parts of Network Functions , Magnitude And Phase Plots, Complex Loci Plots From S-Plane Phasors , Bode Diagrams, The Nyquist Criterion
• To Design a circuit and network. • To analyze circuit characteristics • To identify current and potential value in network. • To simplify any two port network.
F. Recommended Study Material:
Reference Books:
1.Network Analysis By Van Valkenburg,3rd Edition, McGraw-Hill Science/Engineering/Math
2.Circuit and Networks by Sudhakar McGraw-Hill Science/Engineering/Math
3. Network Analysis and Synthesis By G.K.mithal 4.Electrical Circuit Analysis by C.L.Vadhwa, New Age International
Web Materials/ Reading Material: www.educypedia.be/electronics/electricitycircuits.htm www.ebookchm.com/ebook___network-analysis-in-circuit-theory-ppt_.html
1) Lab Manuals 2) Hand Outs 3) Assignments 4) Question Bank
CHAROTAR UNIVERSITY OF SCIENCE & TECHNOLOGY
FACULTY OF TECHNOLOGY & ENGINEERING V. T. PATEL DEPARTMENT OF ELECTRONICS & COMMUNICATION
ENGINEERING
B. TECH. (ELECTRONICS & COMMUNICATION)
2ND YEAR SEMESTER: III
EC 203: SOLID STATE ELECTRONICS ______________________________________________________________________
Credit Hours: Teaching Scheme Theory Practical Total Credit
Hours/week 4 2 6 5
Marks 100 50 150
A. Objective of the Course: This course will introduce the students about various analog electronic devices and circuits such as Diodes, Transistor Characteristics, Transistor Biasing and Thermal Stabilization, Field Effect Transistor, Multistage Amplifiers. With this they can design the circuits as per the applications. B. Out line of the Course:
Sr. No. Title of the Unit Minimum Number of
Hours
1. Semiconductor Physics 8
2. Semiconductor Diode Characteristics 8
3. Transistor Characteristics and Transistors Biasing and Thermal Stabilization
10
4. BJT as Small Signal Low Frequency Amplifier 10
5. Field Effect Transistor 8
6. Transistor at High Frequencies 8
7. Multistage Amplifiers 8
Total Hours (Theory):60
Total Hours (Lab): 30
Total Hours: 90
C. Detailed Syllabus:
1. Semiconductor Physics 8 Hrs
10%
1.1 The Energy Band Theory of Crystals, Insulators, Semiconductors and Metals, Mobility and Conductivity, Electrons and Holes In An Intrinsic Semiconductor, Donor and Acceptor Impurities, Charge Densities
1 Hr
1.2 Mobility and Conductivity, Electrons and Holes in an Intrinsic
Semiconductor, Donor and Acceptor Impurities, Charge Densities
1 Hr
1.3 Hall Effect, Conductivity Modulation, Generation And Recombination of Charges Diffusion
1 Hr
1.4 Continuity Equation, Injected Minority Carrier Charge, Potential Variation Within a Graded Semiconductor
1 Hr
1.5 Energy Distribution of Electrons in a Metal, Fermi-Dirac Function, Densities of States, Electron Emission From A Metal
2 Hrs
1.6 Carrier Concentration In An Intrinsic Semi, Fermi-Level, Band Structure of An Open-Circuit PN Characteristic, Dynamic Diffusion Capacitance
2 Hrs
2. Semiconductor Diode Characteristics 8 Hrs
10%
2.1 Open-Circuited PN Junction, P-N Junction as A Rectifier, Current Components in A PN Junction Diode
2 Hrs
2.2 Volt-Ampere Characteristics, Photo-Diode, Temperature Dependence of Diode Characteristic, Transition Capacitance (CT), Diffusion Capacitance
3 Hrs
2.3 Diode Resistance, Charge Control Description of A Diode, Rectifiers, Full Wave Circuits, C, LC, II Filters
3 Hrs
3. Transistor Characteristics And Transistors Biasing and Thermal Stabilization 10 Hrs
10%
3.1 Junction Transistor, Transistor Action, Transistor Currents Component, Transistor as a Amplifier
3 Hrs
3.2 Transistor Configurations- CB, CC, CE, CE Cutoff, And Saturation Regions, Maximum Voltage Rating, DC Operating Point
4. BJT As Small Signal Low Frequency Amplifier 10 Hrs
15%
4.1 Transistor As An Amplifier, General Characteristics Of An Amplifier, Hybrid Model, Determination Of H-Parameters From Characteristics.
2 Hrs
4.2 Analysis Of Amplifier Circuit Using H-Parameters. Common Emitter Circuit, Common Collector Or Emitter Follower Circuit, Common Base Circuit,
3 Hrs
4.3 Analysis Of Common Emitter Amplifier With Collector To Base Bias, Comparison Of Transistor Amplifier Configurations, Linear Analysis Of A Transistor,
3 Hrs
4.4 Miller’s Theorem And It’s Dual, Cascading Transistor Amplifiers, Simplified CE And CC Hybrid Model
2 Hrs
5. Field Effect Transistor 8 Hrs
15%
5.1 Construction Of JFET, Operation Of JFET, JFET Characteristics, Pinch-Off Voltage,
2 Hrs
5.2 JFET Volt-Ampere Characteristics, FET Small Signal, MOSFET, FET As A VVR FET Biasing,
2 Hrs
5.3 Fixed Bias Circuit, Voltage Divider Biasing Circuit, Self Bias Circuit, Biasing For Depletion Type MOSFET,
2 Hrs
5.4 JFET As An Amplifier, JFET Low Frequency Small Signal Model, Common Source Circuit, Common Drain Circuit
2 Hrs
6. Transistor At High Frequencies 8 Hrs
20%
6.1 Hybrid II CE Transistor, Hybrid II Conductance, Hybrid II Capacitance. Validity At Hybrid II Model, Variation Of Hybrid II Parameters
3 Hrs
6.2 CE Short-Circuit Current Gain, Current Gain With Resistive Load, Single Stage CE Transistor Amplifier Response
3 Hrs
6.3 Gain- Bandwidth Product, Emitter Follower At High Frequency 2 Hrs
7. Multistage Amplifiers 8 Hrs
20%
7.1 Classification of Amplifiers, Distortion in Amplifiers, Frequency Response of an Amplifier, Step Response of an Amplifier.
3 Hrs
7.2 Bandpass of Cascaded Stages, Two Stage RC Amplifier, Low Frequency Response of An RC-Coupled Stage. Effect of An Emitter Bypass Capacitor on Low Frequency Response
3 Hrs
7.3 High Frequency Response of Two Cascaded CE Transistor Stages, Multistage CE Amplifier Cascade At High Frequencies
• Upon completion of this course, students will understand the operation, function and
interaction between various components and its characteristics.
• Students will also get detail study of Rectifiers, Transistor Biasing, H-Parameters,
FET, Multistage Amplifiers. F. Recommended Study Materials
Reference Book & Text Book:
1.Electronics Devices and Circuit Theory ( sixth Edition) by Boylestead & Louis Nashelsky published by Pearson Education Asia 2.Integrated Electronics by Jacob Millman Grable Tata McGraw-Hill Edition 1991
Credit Hours: Teaching Scheme Theory Practical Total Credit
Hours/week 3 2 5 4
Marks 100 50 150
A. Objective of the Course: The objective of the course is to introduce the student fundamentals of Electronics Instruments and Measurement providing an in-depth understanding of Measurement errors, Bridge measurements, Digital Storage Oscilloscope, Function Generator and Analyzer, Display devices, Data acquisition systems and transducers.
B.Out Line of the Course: Sr.
No.
Title of the Unit Minimum Number of
Hours
1. Measurement Errors 03
2. Bridge Measurements 07
3. Digital Instruments 08
4. Digital Storage Oscilloscope 04
5. Function Generator And Analyzer 07
6. Display Devices 09
7. Data Acquisition Systems And Transducers 07
Total Hours (Theory):45
Total Hours (Lab): 30
Total Hours: 75
C. Detailed Syllabus: 1. Measurement Errors 3 Hrs 6%
1.1 Introduction to Subject, Definitions 1 Hr
1.2 Accuracy and Precision, Significant Figures, Types of Error 1 Hr
1.3 Statistical Analysis, Probability of Errors, Limiting Errors 1 Hr
2. Bridge Measurements 7 Hrs 15%
2.1 Wheatstone Bridge, Kelvin Bridge 2 Hrs
2.2 AC Bridge And Their Applications, Maxwell Bridge, Hay’s Bridge 1 Hr
2.3 Unbalance Conditions, Wein Bridge 1 Hr
2.4 Anderson’s Bridge, De Sautys Bridge, Schering Bridge 2 Hrs
3. Digital Instruments 8 Hrs 18% 3.1 Digital Frequency Meter, Circuit For Measurement of Frequency,
Simplified Composite Circuit For Digital Frequency Meter High Frequency Measurements
3 Hr
3.2 Period Measurement, Ratio And Multiple Ratio Measurements, Time Interval Measurements, Resolution in Digital Meter Sensitivity of Digital Meters
3 Hrs
3.3 Accuracy Specification of Digital Multimeters, Digital L, C And R Measurements, Digital LCR Meter and Q Meter
2Hr
4. Digital Storage Oscilloscope 4 Hrs 9% 4.1 Introduction, Oscilloscope Block Diagram, Cathode Ray Tube 1 Hr
4.2 Block Diagram Of DSO , Its Principle and Working, Advantages And Applications
2 Hrs
4.3 Special Oscilloscope 1 Hr
5. Function Generator And Analyzer 7 Hrs 16% 5.1 Introduction, The Sine Wave Generator, Frequency Synthesized Signal
Generator 2 Hrs
5.2 Frequency Divider Generator, Vector Signal Generator 1 Hr
5.3 Sweep Frequency Generator, Pulse And Square Wave Generator, Function Generator,
1) Lab Manuals 2) Hand Outs 3) Assignments 4) Question Bank 5) EMI kits
B. Tech. (Electronics & Communication Engineering) Programme
SYLLABI (Semester – 4)
CHAROTAR UNIVERSITY OF SCIENCE AND TECHNOLOGY
CHAROTAR UNIVERSITY OF SCIENCE & TECHNOLOGY
FACULTY OF TECHNOLOGY & ENGINEERING V. T. PATEL DEPARTMENT OF ELECTRONICS & COMMUNICATION
ENGINEERING
B. TECH. (ELECTRONICS & COMMUNICATION)
2ND YEAR SEMESTER: IV
EC207: CONTROL SYSTEMS
Credit Hours: Teaching Scheme Theory Practical Total Credit
Hours/week 4 2 6 5
Marks 100 50 150
A. Objective Of The Course:
The Goals of The Course are To Introduce the Student to Different Types of Control Systems and
Its Characteristics. It Also Shows Different Representation Ways of Control Systems To Find Out
Various Analysis Results. Learn Different Techniques Like Routh-Hurwtiz Stability Criterion,
Root Locus, Time and Frequency Domain Analysis. It is Also Shown Different Ways to Judge the
Performance of Control System.
B. Out Line of The Course:
Sr. No.
Title of The Unit Minimum Number of Hours
1. Introduction To Control Systems 3 2. Mathematical Modeling of Dynamic Systems 5 3. Block Diagram Technique and Signal Flow Graphs 5 4. Feedback Characteristics of Control Systems 5 5. Control Systems and Components 7 6. Time Response Analysis & Design Specifications 7 7. Concept of Stability, and Algebraic Criterion 6
8. The Root Locus Technique 4 9
The Frequency Response Analysis 7
10 State Variable Analysis of Control System 6 11
Performance of Control Systems 5
Total Hours (Theory): 60
Total Hours (Lab): 30
Total:90
C. Detailed Syllabus:
1. Introduction To Control Systems 3 Hrs 5 %
1.1 Introduction To Control Systems, Classification of Control Systems, The
Open-Loop Control Systems & Closed-Loop Control Systems
1 Hr
1.2 Comparison of Open-Loop Control Systems & Closed-Loop Control
Systems, Servomechanism
1 Hr
1.3 Examples With Applications In Engineering Field 1 Hr
2 Mathematical Modeling of Dynamic Systems 5 Hrs 8 %
2.1 Introduction, Differential Equations of Physical Systems, Mechanical
Upon Successful Completion of This Course, Student Should Be Able To:
• Student Gets Ability To Identify Different Control System, Formulate and Solve Control System Problems.
• Student Gets Manage Apply Knowledge and Understanding To Analyze Control Systems and Processes.
• Student Gets Capability To Design and Conduct Appropriate Control System and Draw Conclusions.
F. Recommended Study Material:
a. Reference Books:
1) Automatic Control Systems By B.C.Kuo.
2) Modern Control Engineering. By K. Ogata (Third Edition), Published By Prentice-Hall of India
Private, New Delhi.
3) Control System Engineering. By I.J. Nagrath & M. Gopal (Third Edition), Published By New Age
International Publishers, New Delhi.
4) Automatic Control Systems By S.N.Verma. 5) Linear Control Systems By B.S.Manke. 6) Automatic Control Engineering By Raven.
Reading Materials, Web Materials With Full Citations: Www.Mathworks.Com Http://En.Wikipedia.Org/Wiki/Control_Engineering Http://Www.Controlsrus.Com/Products.Html Nptel.Iitm.Ac.In Http://Www.Filestube.Com Http://Eprintsgla.Ac.Uk/3818
Other Materials
1. Lab Manuals
2. Control Engineering Kits
3. Hand Outs
4. Assignments
5. Question Bank
CHAROTAR UNIVERSITY OF SCIENCE & TECHNOLOGY
FACULTY OF TECHNOLOGY & ENGINEERING V. T. PATEL DEPARTMENT OF ELECTRONICS & COMMUNICATION
Credit Hours: Teaching Scheme Theory Practical Total Credit
Hours/week 4 2 6 5
Marks 100 50 150
A. Objective of The Course:
The Purposes or Goals or Objectives of The Course are To Introduce the Students about Different
Electronic Devices like Amplifiers, Oscillators, Switching Circuits & Time Base Generators So
They Can Get the Ideas for the Complex Electronic Projects.
B. Out Line of The Course:
Sr
No.
Title of The Unit Minimum Number of
Hours
1. Power Amplifier 2
2. Power Supply
2
3. Differential Amplifier
6
4. Feedback Amplifier 6
5. Oscillators
8
6. Clipping and Comparator Circuits 6
7. Clamping and Switching Circuits 6
8. Voltage Time Base Generators 6
9. Current Time Base Generator 6
10. Negative Resistance Devices 8
11. Analog To Digital and Digital To Analog Converters: 4
Total Hours (Theory): 60
Total Hours (Lab): 30
Total: 90
C. Detailed Syllabus:
1. Power Amplifier 2 Hrs 6 %
1.1 Class A, Second Harmonics Distortion, Higher Order Harmonics Generation
1 Hr
1.2 Transformer-Coupled Audio Power Amplifiers, Efficiency, Push-Pull Amplifier, Class B, Class Ab
1 Hr
2. Power Supply 2 Hrs 6 %
2.1 Regulated Power Supply – Series Voltage Regulator Design, Short Circuit and Overload Protections, Voltage Regulator Ics.
2 Hrs
3 Differential Amplifier 6 Hrs
8 %
3.1 Principle, Circuit Analysis of Bjt Differential Amplifier, Cmrr, Use of
Current Source Circuit For Increasing Cmrr.
6 Hrs
4. Feedback Amplifiers 6 Hrs 10 %
4.1 Feedback Concept, Transfer Gain With Feedback, General Characteristics of Negative-Feedback Amplifiers, Input Resistance, Output Resistances, Method of Analysis of A Feedback Amplifier.
11.1 Digital To Analog Conversion, R-2r Ladder Type Dac, Weighted Resistor Type Dac, Switched Current Source Type Dac, Switched Capacitor Type Dac
2 Hrs
11.2 Analog To Digital Conversion, Counter Type A/D Converter, Tracking Type A/D Converter, Flash-Type A/D Converter, Dual Slope Type A/D Converter, Successive Approximation Type Adc.
2 Hrs
D. Instructional Method and Pedagogy:
• Chapter Wise Assignments • OHP • Chalk – Board • Power Point Presentation • White Board • Online Demo • Charts
E. Student Learning Outcomes :
Upon Completion of This Course, Students Will Understand The Operation, Function and Interaction Between Various Components and Sub-Systems Used In Power Amplifier, Power Regulator, Clipper and Clamping, Feedback Amplifier, Oscillators, Voltage Time Base Generator, Current Time Generator, Negative Resistance Devices.
F. Recommended Study Material:
Reference Books:
1) Integrated Electronics By Jacob Millman and Christos C. Halkias, Tata Mcgraw-Hill Edition
2) Pulse, Digital and Switching Waveforms By Jacob Millman and Herbert Taub, Tata Mcgraw-
Hill Edition.
3) Electronics Devices and Circuits Theory ( Sixth Edition) By Boylestead & Nashelsky Phi Pub.
Reading Materials, Web Materials With Full Citations:
1) Lecture Notes
2) Hand Outs
3) Assignments
4) Project and Quiz
CHAROTAR UNIVERSITY OF SCIENCE & TECHNOLOGY FACULTY OF TECHNOLOGY AND ENGINNERING
V. T. PATEL DEPARTMENT OF ELECTRONICS & COMMUNICATION
The Purposes or Goals or Objectives of The Course Are To Introduce The Students To Become Familiar With The Architecture of A Specific Microprocessor 8085 and Microcontroller 8051 and Programmable Interfacing Devices.
B. Out Line of The Course:
Sr
No.
Title of The Unit Minimum Number
of Hours
1 Introduction of Microprocessors, Microcontrollers & Microcomputer System
1
2. 8085 Microprocessor Architecture and Memory Interfacing
3
3. Programmable Interface Devices-8255,8254,8251
10
4. Introduction and Architecture of 8051 10
5. Basic Assembly Language Programming Concepts
10
6. Moving Data, Logical Operations & Arithmetic 10 7. Jumps and Call Instructions 6 8. An 8051 Microcontroller Design 6 9. Serial Data Communication 4
Total Hours (Theory) : 60
Total Hours (Lab): 30
Total: 90
C. Detailed Syllabus:
1. Introduction of Microprocessors, Microcontrollers & Microcomputer System 1 Hrs
1.66 %
1.1 Basics of Microprocessors and Controllers and Comparision 0.5 Hr
1.2. Microprocessor Architecture and Operation, Memory I/O Devices 0.5 Hr
6.1 Byte& Bit Level Logical Operations, Rotate and Swap Operations, Example Programs
5 Hrs
6.2 Flags, Incrementing Decrementing, Addition, Subtractions, Multiplication and Division, Decimal Arithmetic, Example Programs
5 Hrs
7 Jumps and Call Instructions 6 Hrs 10 %
7.1 Jump and Call Program Range, Jumps 3 Hrs
7.2 Calls and Subroutines, Interrupts and Returns, Detail On Interrupt 3 Hrs
8 An 8051 Microcontroller Design 6 Hrs 10 %
8.1 Specification and Design, Testing The Design 2 Hrs
8.2 Timing Subroutines, Lookup Table For 8051 2 Hrs
8.3 Serial Data Transmission 2 Hrs
9. Serial Data Communication 4 Hrs 6.66 %
9.1 Network Configurations 2 Hrs
9.2 8051 Data Communication Modes Example 2 Hrs
D. Instructional Method and Pedagogy:
• Multimedia Projector
• Chalk-Stick
• Overhead Projector
• Assignments Based On Noise Figure
E. Student Learning Outcomes :
Students Demonstrate That They Can Write Assembly Language Programs For A Microcontroller 8051 To Make It Perform Predefined Tasks.
F. Recommended Study Material:
1. Reference Books:
1) Microprocessor Architecture Programming and Applications By R. S. Gaonkar –
Fourth Edition (WEL)
2) The 8051 Microcontroller – Architecture Programming & Application By K. J. Ayala- Second Edition (Penram International)
3) The 8051 Microcontroller MCS51 & It’s Variants By Prof. S.K.Shah –First
Edition (Oxford University Press )
2. Reading Materials, Web Materials With Full Citations:
• Lecture Notes
• IIT Lecture Notes
• NPTEL Web Course
CHAROTAR UNIVERSITY OF SCIENCE & TECHNOLOGY FACULTY OF TECHNOLOGY AND ENGINNERING
V. T. PATEL DEPARTMENT OF ELECTRONICS & COMMUNICATION
ENGINEERING
B. TECH. (ELECTRONICS & COMMUNICATION)
2ND YEAR SEMESTER: IV
EC210: ANALOG COMMUNICATION _______________________________________________________________________
Credit Hours: Teaching Scheme Theory Practical Total Credit
Hours/week 4 2 6 5
Marks 100 50 150
A Objective of The Course:
This Course Will Introduce The Student To The Various Analog Communication Fundamentals Viz., Amplitude Modulation and Demodulation, Angle Modulation and Demodulation. Noise and Performance of Various Receivers.
6.2 Generators and Comparison of Bjts and Fets, Signal – To – Noise Ratio, S/N Ratio of A Tandem Connection.
3 Hrs
6.3 Noise Factor, Amplifier Input Noise In Terms of F, Noise Factor of Cascade Systems, Noise Factor of A Lossy Network, Noise Equivalent Temperature, Measurement of Noise Temperature and Noise Factor, Narrowband Band-Pass Noise.
• Provide Knowledge of Various Amplitude Modulation and Demodulation Systems. • Deliver Knowledge of Different Angle Modulation and Demodulation Systems. • Provide Some Depth Analysis In Noise Performance of Various Receivers.
F. Recommended Study Material:
Reference Books:
1) Electronic Communications By Dennis Roddy & John Coolen IV Edition PHI.
2) Modern Digital and Analog Communication System III Edition By B.P.Lathi Pub
Oxford.
Reading Materials, Web Materials With Full Citations: