Sws Gates Technical Guide 2004 90321

8/20/2019 Sws Gates Technical Guide 2004 90321

1/11

Cl/SfB

September 2004

(31.5)SECEUROGUARD TECHNICAL GUIDE

PROPERTY PROTECTION SYSTEMS

Commercial

Retail

Counter & Cabinet

Domestic

SECEUR GUARDTM

RETRACTABLE SECURITY GATES

2

www.samsondoors.co.uk (0800) 328 6250



2/11

INSURANCE APPROVED

The SeceuroGuard 1001 Retractable Security Gate offers an outstandingmix of security with the elegance of the lattice style design. TheSeceuroGuard 1001 is SWS’s Insurance Approved design. Approval hasbeen gained as a result of independent testing to Loss PreventionStandard (LPS) 1175 Security Rating Classification 1. The remainder ofthis section covers the background to what this approval and ratingmeans in practical terms.

REMOVING THE GUESSWORK FROM PRODUCT

EVALUATION AND SELECTION

How can you know which products are truly resistant to physical attack?

Appearance may suggest security, but can you be sure that a devicedoes not contain a design flaw that will allow rapid access to theingenious burglar? Specifiers, end-users, the police and insurers areincreasingly demanding physical security products that carry an

independent stamp of compliance and quality assurance.

TESTED AND APPROVED TO LPS 1175

The Loss Prevention Certification Board (LPCB), the UK’s leadingindependent certification body for fire and security products, operatesan approval scheme to LPS 1175. Approval and certification is based onthe testing of a product’s performance and the manufacturer’s qualitymanagement systems being in accordance with ISO 9002. Installationprocedures are also defined to a high standard, ensuring the productperformance is not compromised by sub-standard installation. Thesespecialist products should only be attached to structurally soundopenings such as masonry, brick, steel or timber, moreover the typeand frequency of fixings required is very precise. LPS 1175 is the

only meaningful benchmark for gauging actual resistance in theface of a determined attack.

Passing the test regime is a tough and lengthy process that hasbeen successfully completed by the SeceuroGuard 1001. Under thestringent conditions of a comprehensive test regime, SeceuroGuard 1001is subjected to a variety of assaults from equipment commonly used forvandalism and breaking and entering, in order to ascertain its burglary

resistance to physical attack.

LPCB approval and certification gives assurance of the SeceuroGuard1001’s construction and consistent performance to an internationally

recognised standard.

Take the guesswork out of product selection - use tested and approved

products from SWS.

THE POLICE PREFERRED SPECIFICATION

As a further reinforcement of the products performance, theSeceuroGuard 1001 retractable security gate hassuccessfully undergone Secured by Design evaluation andis able to display the “Police Preferred Specification” mark.Secured by Design identifies technical standards andevaluations which test the competence of security productsand their resistance to criminal attack. The tests andevaluations are carried out by UKAS approved test houses.

SECEUROGUARD 1001The SeceuroGuard retractable security gate system combines a classicappearance with effective protection, ideal for home or workplace. The highsecurity 1001 has added structural strength from a specially designed latticeassembly system using high patented grade steel inter-screws.

The system can be fitted to the face or reveal of a window or door aperture andcan be specified in a single or double-sash configuration. Where a clear, safewalk through is required SeceuroGuard’s bottom track can, as an optionalextra, be made to fold up.

FOR RESIDENTIAL PREMISES

In high risk areas or simply for added peace of mind, the SeceuroGuard 1001

is an excellent choice for home protection. With added structural strengthcombined with many of the features of the SeceuroGuard 1000, theSeceuroGuard 1001 offers stylish, unobtrusive security alongside potentialinsurance premium benefits.

SeceuroGuard 1001 Security Gates - excellent security with vision, fixed here behind a window arch.

SeceuroGuard 1001 Insurance ApprovedRetractable Security Gates

SECEUR GUARDTM

1001

SeceuroGuard 1001 undergoing a simulated attack test

‘X’ L attice ‘S’ L attice




3/11


Folding Bottom Track

Option

FOR RETAIL PREMISES

The added security and strength of the insurance approved SeceuroGuard1001 offers effective protection of high value stock in window and storedisplays. Combining many of the features of the SeceuroGuard 1000 withincreased structural strength and, in most cases, 4 point locking, theSeceuroGuard 1001 has optional folding bottom tracks to allow unrestrictedaccess through doorways when the gates are open and compact sasheswhich fold neatly to the side giving unobscured visibility of window displays.

FOR BUSINESS PREMISES

Businesses in vulnerable locations or premises containing valuable equipmentare often targeted by criminals. Either on an insurance company’s

recommendation, or to pre-empt future attack, the insurance approvedSeceuroGuard 1001 is the perfect choice. Offering enhanced strength andsecurity with minimal obstruction to visibility and natural light even when thegates are in the closed position, premises and staff are protected with nodetraction to the appearance of the office environment.

Effective protection for business

3

Vision and light levels are excellent - now you see it

SECEUROGUARD 1001

HIGH PERFORMANCE SECURITY, NO SACRIFICE IN APPEARANCE

l Strong - Made from galvanised steel with a patented fixing systeml Versatile - Custom built for almost any opening, gates fit internally in either

the window reveal or around the opening in either single or double-sashconfiguration

l Ease of use - Smooth top running operation with an option of a foldingbottom track to leave doorways unobstructed

l Secure - Multi-point locking (4 point in most cases, with three point onsmaller gates) operating from a single key which is out of view of potentialattackers whist remaining easy to operate from either side

l High quality maintenance free finish - Supplied in high quality white powdercoated finish as standard. Optional colours are available from stock

l A floating sash version is availablel A fixed frame version is available when retraction of the gate is not required

When extra security and strength is needed, SeceuroGuard 1001 is theinsurance approved option. Stylish, yet deceptively strong, unobtrusive,essentially maintenance free and easy to use, the SeceuroGuard 1001 offersLPCB certified and approved protection.

Standard ‘X’ Lattice

‘S’ Lattice Option

...now you don’t




4/11

AN EFFECTIVE BARRIER AND DETERRENT TO CRIME

The SeceuroGuard Retractable Security Gate system is a stylish solutionfor protecting windows and doors. The SeceuroGuard 1000, the standarddesign, offers security combined with through-vision.

When protection is needed, SeceuroGuard 1000 acts as a visibledeterrent to would be intruders who, should they persist, will meet with aneffective barrier to entry. When not in use, SeceuroGuard 1000 isunobtrusive and compact. The sashes fold neatly to the side, out of sightbehind curtains or vertical blinds, with the option of fold away bottomtracks to leave openings unrestricted.

Reliable, quick and easy to use, maintenance free with multi point lockingand galvanised for corrosion resistance, the SeceuroGuard 1000 offers

effective yet flexible security.

VISIBLE DETERRENT, VISIBLE STOCK

FOR RETAIL PREMISES

Installed inside a shop window, SeceuroGuard 1000 retractable gates deliveran exceptionally strong yet aesthetically appealing barrier against intruders,which allows merchandise to be displayed safely, 24 hours a day. Productsstay on display with unrestricted visibility and yet remain protected.

Fitted at the rear of a window display, retractable gates also effectively create anattractive backdrop whilst protecting the shop’s interior. The window display viewremains totally uninterrupted whilst the gate is accessible for easy operation.

SeceuroGuard 1000 retractable gates are safe, easy to handle, smooth andquiet to operate. They hang from a top track with a guide track at the basewhich, as an optional extra, can be supplied to quickly fold up when not

required, leaving shop entrances free from obstruction and aid disabledaccess.

Being fully retractable, when not required, each sash can be folded neatly inthe open position away from the door or window openings. Optionally, gates maybe hinged to swing away from the opening at 90˚ or up to 27O˚ to provide acompletely clear opening (hinge aside option requires a folding bottom track).

MATCHING STYLE WITH STRENGTH

FOR RESIDENTIAL PREMISES

Elegant good looks with a heart of steel - the SeceuroGuard 1000Retractable Security Gate System combines a classic appearance withstrength, making it an ideal security choice for the home.

Designed to keep intruders out while letting maximum light in, they areperfect for patio doors, French windows and any other vulnerable groundfloor doors or windows. Gates can be left locked with doors open toprovide ventilation without loss of security.

When not in use these retractable gates are surprisingly unobtrusive.Fitted to the door or window surround, they can disappear neatly behindcurtains and a pelmet can be used to conceal the top track.

The gates offer the option to remove the bottom guide track from theopening and sashes may be hinged to swing to the side at 90˚ or up to

27O˚ leaving French windows and doorways free from obstruction. (Thehinge aside option requires a folding bottom track).

Essentially maintenance free, each SeceuroGuard 1000 is available in arange of powder coated colour options to complement your decor, andcan also be supplied with optional decorative ‘S’ Profile lattices.

Excellent light levels when closed

SeceuroGuard 1000Retractable Security Gates

SECEUR GUARDTM

1000

Security and deterrent Quick and easy operation. Bunching

to the side, the gates are concealedbehind the curtains when open




5/11


Optional Folding Bottom

Track

SECURE YET UNOBTRUSIVE

FOR COMMERCIAL PREMISES

Allowing maximum natural light into commercial premises, retractable gatesfold to the sides of the window reveal when not required and can be concealedneatly behind vertical blinds to create a secure but pleasant workingenvironment.

Office premises, staff and equipment are safely protected by an exceptionallystrong security barrier, manufactured from pre-galvanised rolled steel withmulti point locking from a single key.

Offering security features which are particularly important on vulnerableground floor windows and doors, the SeceuroGuard 1000 ensures excellentbarrier security. Whilst the top hung ultra-smooth carrier system and nylon

coated steel bearings also ensure it is quick and easy to open and close.SeceuroGuard 1000 is essentially maintenance free and available in a broadrange of optional powder coated colours to complement corporate styling.

Protecting valuable stock

5

Perfect for protecting vulnerable patio doors Slide the sash aside for an uninterrupted view

Retail installations still permit product display

SECEUROGUARD 1000

CLEAR BENEFITS

Essentially maintenance free with a wide range of colour options and a choice oflattice styles, classic appearance and convenience combine with the high levels ofprotection.

l Strong security barrier and deterrentl Galvanised for corrosion resistance and powder coatedl Fully retractable systeml Excellent through-vision and ventilation when lockedl Multi-point locking (2 point) from a single keyl Smooth running carrier system ensures quick and easy operationl Custom built for almost any opening

l An unlimited width can be accommodated in sectionsl A floating sash version is availablel A fixed frame version is available when retraction of the gate is not required

Exceptionally strong, yet unobtrusive and stylish, the SeceuroGuard 1000 willtransform the way you protect your property.

Standard ‘X’ Lattice

‘S’ Lattice Option

The hinge aside option ensuresa totally clear view

(The hinge aside option requires

a folding bottom track)

‘S’ Lattice design




6/11


Specification

SECEUR GUARDTM

GENERAL ARRANGEMENT

1 Top hung on nylon coated steel bearings

2 All galvanised steel construction

3 Powder coating in a range of colours

4 Fits within or around the reveal

5 4 point locking from a single key with the lock

mechanism shielded by a steel plate

6 Strong steel lattice with smooth durable finish

7 Overlapped locking profiles

8 Optional folding bottom track

9 The 1001 has a specially designed lattice

assembly system utilising high grade steel

screws (patented).

1 95

5

7 8

1001 Insurance Approved Specification

1001 INSTALLATION CRITERIA

l Reveal or face installationl Min fixing distance from edge of reveal 50mml Max fixing distance from any corner 100mml Max distance between fixing 400mml All fixing heads spoiled:

Masonry 2.5” x 12sWood 4.0” x 12sSteel 1.0” x M8s

The validity of the

LPCB certification is

contingent upon each

security gate being

installed in accordance

with the requirements

of LPS 1175.

SECEUR GUARDTM

1000 Specification

GENERAL ARRANGEMENT

1 Top hung on nylon coated steel bearings

2 All galvanised steel construction

3 Powder coating in a range of colours

4 Fits within or around the reveal

5 Multi-point locking from single key - 2 point

6 Strong steel lattice with smooth durable finish

7 Overlapped locking profiles

8 Optional folding bottom track

9 Steel riveted lattice assembly system.

1

5

7 8

1

6

2

3

4

5

7

9

8

1

6

2

3

4

5

7

9

8

Steelshieldingplate(1001)

‘X’ L attice ‘S’ Lattice

Note - All approved gates carry a label detailing the manufacturer, test standard and rating.




7/11

LOCK HOOKS

BUNCH SIZES (MM) SECURITY GATES BUNCH SIZES

25mm

Retaining pin

which protrudes

from the lock post

projects 30mm

Slam postLock post

SIZES

7

Sizing

Min Width

Min Height

Max Width

Max Height

Single Sash

500

1000

3000

3000

Double Sash

1000

1000

6000

3000

1001

19kgm2

WEIGHT

Uneven Sashes On double sash

gates, the sashes can be split with themajority opening to one side, usefulwhere there is a preference or a limitedspace at one side of the aperture toaccommodate the retracted sash.

*Please ask for details on widths greater than 6m

mm

500

600

700

800

900

1000

1100

1200

1300

1400

1500

1600

1700

1800

1900

2000

2100

2200

23002400

2500

2600

2700

2800

2900

3000

3100

3200

3300

3400

3500

3600

3700

3800

3900

4000

4100

4200

4300

4400

4500

4600

4700

4800

4900

5000

5100

5200

5300

5400

5500

5600

5700

5800

5900

6000

OVERALLGATE

WIDTH‘A’

SINGLESASH

BUNCH‘B’

SINGLE SASH DOUBLE SASH

CLEAROPENING

WIDTH‘C’

DOUBLESASH PER

BUNCH‘D’

CLEAROPENING

WIDTH‘E’

mm

135

135

150

165

180

180

195

210

225

225

240

255

270

285

285

300

315

330

330345

360

375

375

390

405

420

435

435

450

465

480

480

495

510

525

525

540

555

570

585

585

600

615

630

630

645

660

675

675

690

705

720

735

735

750

765

mm

315

415

500

585

670

770

855

940

1025

1125

1210

1295

1380

1465

1565

1650

1735

1820

19202005

2090

2175

2275

2360

2445

2530

2615

2715

2800

2885

2970

3070

3155

3240

3325

3425

3510

3595

3680

3765

3865

3950

4035

4120

4220

4305

4390

4475

4575

4660

4745

4830

4915

5015

5100

5185

mm

135

135

150

150

150

165

165

180

180

180

195

195

195

210210

225

225

225

240

240

255

255

255

270

270

270

285

285

300

300

300

315

315

330

330

330

345

345

345

360

360

375

375

375

390

390

405

405

405

420

420

mm

730

830

900

1000

1100

1170

1270

1340

1440

1540

1610

1710

1810

18801980

2050

2150

2250

2320

2420

2490

2590

2690

2760

2860

2960

3030

3130

3200

3300

3400

3470

3570

3640

3740

3840

3910

4010

4110

4180

4280

4350

4450

4550

4620

4720

4790

4890

4990

5060

5160

Note: All clearopening sizes for singlesash gates allow for theslam post. For hingeaside gates the bunchsize is increased by afurther 30mm per sash

Please note: The clear opening widths detailed aboveapply to retractable gates with fixed tracks. If the gaterequires folding bottom tracks or the hinge aside option(with or without folding bottom tracks) you will need toadd 60mm per bunch to the bunch sizes above.

Note: Folding tracks with a length of 600mm or more are suppliedwith a retaining pin as standard. This is located between 488mmand 568mm from the ground regardless of track length.The retaining pin projects 60mm beyond the lock post

when the track is lowered and 30mm when raised. If thewidth of the gate is greater than the height check that there will besufficient room for the bottom track to fold up into.

*NOTE: SeceuroGuard 1000 can accommodate an unlimited width with multiple sashes. Sashes are made in single pieces up to 2m wide. Larger sizesare made in sections for assembly on site, ensuring the weight of each section can be handled safely. Gates which are wider than 4m will be supplied withthe top track in two pieces, the split will be in the middle. Where two split sashes meet two pickets are joined together using bolts and fixing plates suppliedloose (see illustration above).

Pickets

TappedPlates

M6x12C/sunkBolt

C/sunkPlates

Gate HeightRange (mm)

1000+

1000-500

500-350

Number of lockhooks available

2 (4 optional)

2

Fixed Panel

Sizing

Min Width

Min Height

Max Width

Max Height

Single Sash

350

500

*3000

3500

Double Sash

700

500

*6000

3500

1000 SASH JOINT




8/11


Specification

REVEAL FIX FRONT ELEVATION

FACE FIX FRONT ELEVATION

TERMINOLOGY

8

TRACK PROFILES

Top Track

Fixing Frame

Bottom ‘W’ Track

Low profile Bottom ‘T’ TrackLow security option SeceuroGuard 1000 only

Lock Post

Picket

– Bunch / Stack / Hand

– Top runner / Top Rail / Top Guide

– Lift up / Hinge (should not be used -can be confused with the hinge aside option)

– Lift Out / Lift Off

– Hinging Sash / Swinging Sash / Fold Back

– C-Side / Reinforcing for Top Track / Strengthening for Top Track

– Between Walls / Recess

– Surface Mounted / Plant On

– Double / Double Draw / Split

– Suited / Same

– Upright

SASH

TOP TRACK

FOLDING TRACK

REMOVABLE TRACK

HINGE ASIDE

C-SIDE FIXING FRAME

REVEAL FIXED

FACE FIXED

BI-PARTING

KEYED ALIKE

PICKET

The following lists the preferred terminology applied to SeceuroGuard gates (in Bold) and alternativeswhich are also in common use:

Top track

Sash (open)

Sash(closed)

Folding track

Picket

Lattice




9/119

FACE FIXED SIDE ELEVATION FACE FIXED SIDE ELEVATION WITH PACKER REVEAL FIXED SIDE ELEVATION

FACE FIX PLAN VIEWS & FIXING DETAILS

Face Fix shownwith packers toaccommodateuneven surface

Single SashFace Fixed

Face Fixed Side Frame Detail

Double Sash Face Fixed

FIXING DETAIL

FaceFixedSide

Frame

REVEAL FIX PLAN VIEWS & FIXING DETAILS

Single Sash Reveal Fixed

Double Sash Reveal Fixed

FIXING DETAIL

FACE FIX

Reveal Fixed Side Frame Detail

FIXING DETAIL

LATTICE CONFIGURATIONS

LATTICE DESIGNSHigh grade steel construction in ‘X’lattice and ‘S’ lattice as an option.

Lattice Increments with the options for lock position denoted by the key symbol

‘S’ lattice optionStandard ‘X’ lattice

LATTICE INCREMENTS

GATE HEIGHT NUMBER OF LATTICES

0 - 999 11000 - 1599 21600 - 2099 32100 - 2699 42700 - 3500 5

The standardarrangement for aface fitted gate is asshown with the toptrack and sides facefixed and the bottomtrack reveal fixed.When orderingplease identifyclearly how eachside of the frame willbe fitted. Importantly,the size of your orderwill be manufacturedto a height includingfixing frame(s).

Lock post Slam post

Single SashGATE BUNCH

WIDTH QUANTITY500 5560 6690 7820 8950 9

1080 101210 111340 121470 131600 141730 15

1860 161990 172120 182250 192380 202510 212640 222770 232900 24

Double SashGATE BUNCH

WIDTH QUANTITY1000 51160 61420 71680 81940 92200 102460 112720 122980 133240 143500 15

3760 164020 174280 184540 194800 205060 215320 225580 235840 24

PICKET QUANTITY CHANGEOVER




10/11


Specification

STANDARD COLOUR OPTIONS

FLOATING SASH OPTION

Both the 1000 & 1001 can be supplied as a

floating sash. With locking to both sides of theassembly, the gates are able to bunch toeither side of the opening. The designfacilitates easy cleaning of windows and canimprove flexibility of access.

FIXED SASH OPTION

Both the 1000 & 1001 can be supplied as afixed sash when retraction is not arequirement. This is often used as analternative to fixed bars.

BOTTOM RUNNING OPTION

The 1000 can be supplied as a bottomrunning version for applications wheresuitable fixing points are not available at thetop of the installation or for very heavy gates.

Please note: the colours illustrated on this page are intended as a guide only.Reference should be made to an appropriate RAL or BS chart prior to ordering. Other RAL or BS colours are available, please ask for details.

Moss GreenRAL 6005Satin

Fir GreenRAL 6009Satin

Pale BrownRAL 8070Satin

BrownRAL 8014Satin

BrownBS 08 B 29Satin

Dark BrownRAL 8022Satin

Poppy RedBS 04 E 53Satin

Traffic RedRAL 3020Satin

Dark RedRAL 3011Gloss

Pale BlueRAL 5015Satin

BlueRAL 5009Satin

Royal BlueRAL 5002Satin

Dark BlueRAL 5003Satin

Dark BlueRAL 5013Satin

Off WhiteRAL 9003Satin

Pale GreyRAL 7047Satin

Pale GreyBS 18 B 17Matt

Pale GreyRAL 7035Satin

GreyBS 00 A 09Satin

GreyRAL 9006Satin

GreyBS 632Satin

Dark GreyRAL 7015Gloss

BlackRAL 9005Satin

We offer the following colours in Satin unless otherwise stated:

WhiteRAL 9010Satin

Brilliant WhiteRAL 9016Satin

MagnoliaRAL 1015Satin

MushroomBS 06 C 33Satin

BeigeRAL 1001Satin

YellowRAL 1018Gloss

OrangeRAL 1028Gloss

Pale GreenRAL 6021Gloss

GreenRAL 6016Satin

GreenBS 14 C 39Satin

NON STANDARD POWDER COATING

COLOURS

If you require assistance identifying or selectinga colour which does not appear on our list ofstock colours we can supply you with a RAL orBS colour chart.




11/11

HINGE ASIDE OPTION DETAIL SeceuroGuard 1000 Only

FOLDING TRACK AND REMOVABLE TRACK OPTION DETAILS

Up to 270˚

Maximum size for hinge aside

1800mm x 2400mm (w x h) single sash

3600mm x 2400mm (w x h) double sash

Single Sash

Folding Track

Option

Bi-parting Sash

Folding Track Option

Lift Out Bottom

Track Option

Note: Foldingtracks with alength of 600mmor more aresupplied with aretaining pin asstandard - seebelow for details

Note: Folding tracks with alength of 600mm or moreare supplied with a retainingpin as standard. This islocated between 488mmand 568mm from the groundregardless of track length.The retaining pin

projects 60mm beyond

the lock post.

Note: The length of thefolding track cannot exceed

the height of the gate

Note: Thelength of thefolding trackcannot exceedthe height ofthe gate

Please Note: SeceuroGuard 1001 is NOT available with the hinge asideoption, bottom running option, split top or bottom track or split sashes

Please Note: Hinge aside gatescan be supplied with either a foldingor lift out bottom track but cannot besupplied with a fixed bottom track.


Sws Gates Technical Guide 2004 90321

Documents