1/ PR Con Sma optio ELE Devi Clas Air in EPC Oper Glo IC ty Imp Imp Mem Wit Wit EPC m Uni Read on off Appl Wo * Read enviro maxim ERP). RAD Freea /2 RODUCT nfidex St all-sized asset ons and unp ECTRICAL SPE ice type ss 1 Generatio nterface proto CGlobal Class1 rational frequ obal 865-928M ype pinj Monza 4Q pinj Monza 4E mory configur th Monza 4QT th Monza 4E: memory cont ique number e d range (2W E metal up to 5 metal up to 1 licable surface orks on any ma d ranges are theo onment, in where mum allowed op Different surface DIATION PAT air T DATA teelwave t tag with ve paralled perfo ECIFICATION on 2 passive U ocol 1 Gen2 ISO 18 uency MHz QT TM E TM (upon spec ration T: EPC 128 bit; EPC 496 bit; U tent encoded as a ERP)* 5 m / 16 ft 1,5 m / 5 ft e materials* aterial oretical values th e antennas with perating power a e materials may h TTERNS c ASHEET e Micro I ersatile attac ormance. N UHF RFID tran 8000-6C cial request) ; User 512 bit User 128 bit; T default hat are calculated optimum directi according to ETSI have an effect on © contact@confid T II™ chment nsponder t; TID 96 bit TID 96 bit d for non-reflecti ivity are used wi I EN 302 208 (2 performance. © Confidex 2012 04-2013 dex.com www ve ith 2W On M Tag En Bac H We 2 De Si Am 1 Dim 3 E Op -2 Am -2 IP c IP Ch N - - A su av Exp Ye Valu env fact fina be t 2 w.confidex.com n metal MECHANICAL g materials ngineering pla ckground adh High performa eight g elivery format ingle mount in box 000pcs mensions 8 x 13 x 4,5 m ENVIRONMEN perating temp 20°C to +70°C mbient tempe 20°C to +70°C classification P67 emical resista No physical or 2 hour Salt wa 2 hour Motor Additionally, sh ulfuric acid. A voided. pected lifetim ears in norma ues in the table vironmental cond tors, exposure du al suitability for c tested. Contact C L SPECIFICAT astics and syn hesive ance acrylic ad t mm / 1.5 x 0.5 NTAL RESISTA perature C / -4°F to +158 erature C /-4°F to +158 ance performance ater exposure r oil exposure hort time expo Acetone and so me al operating co e are the best r ditions depends o uration and chem certain environm Confidex for more TION nthetic face lay dhesive 5 x 0.17 in ANCE 8°F 8°F e changes in: e (salinity 10% osure resistan odium hydrox onditions recommendations on the combinati mical concentrat mental conditions e specific informat yer %) nt against xide should be s; resistance aga ion of all influen tions. Thus, produ s is recommende tion. e ainst ncing uct’s ed to
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1/
PRODUCT DATASHEETConfidex Steelwave Micro II
Small
options and unparalled performance.
ELECTRICAL SPECIFICATION
Device type
Class 1
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
Global
IC type
Impinj Monza
Impinj Monza 4
Memory configuration
With Monza
With Monza
EPC memory content
Unique number encoded as a default
Read range
on metal up to 5
off metal up to 1,5 m / 5 ft
Applicable surface materials
Works on
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
ERP).
RADIATION PATTERNS
Freeair
/2
PRODUCT DATASHEETConfidex Steelwave Micro II
Small-sized asset tag with versatile attachment
options and unparalled performance.
ELECTRICAL SPECIFICATION
Device type
Class 1 Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
Global 865-928MHz
IC type
Impinj Monza 4QT
Impinj Monza 4E
Memory configuration
With Monza 4QT: EPC
With Monza 4E: EPC
EPC memory content
Unique number encoded as a default
Read range (2W ERP)
on metal up to 5
off metal up to 1,5 m / 5 ft
Applicable surface materials
Works on any material
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Different surface materi
RADIATION PATTERNS
Freeair
PRODUCT DATASHEETConfidex Steelwave Micro II
asset tag with versatile attachment
options and unparalled performance.
ELECTRICAL SPECIFICATION
Generation 2 passive UHF RFID transponder
Air interface protocol
EPCGlobal Class1 Gen2 ISO 18000
Operational frequency
928MHz
4QTTM
ETM
(upon special request)
Memory configuration
4QT: EPC 128 bit; User 512 bit; TID 96
4E: EPC 496 bit; User 128 bit; TID 96
EPC memory content
Unique number encoded as a default
(2W ERP)*
on metal up to 5 m / 16 ft
off metal up to 1,5 m / 5 ft
Applicable surface materials*
any material
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
Different surface materials may have an effect on performance.
RADIATION PATTERNS
co
PRODUCT DATASHEETConfidex Steelwave Micro II
asset tag with versatile attachment
options and unparalled performance.
ELECTRICAL SPECIFICATION
Generation 2 passive UHF RFID transponder
EPCGlobal Class1 Gen2 ISO 18000-6C
(upon special request)
t; User 512 bit; TID 96
it; User 128 bit; TID 96
Unique number encoded as a default
* Read ranges are theoretical values that are calculated for non
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
als may have an effect on performance.
© Confidex 2012
contact@confide
PRODUCT DATASHEET Confidex Steelwave Micro II™
asset tag with versatile attachment
Generation 2 passive UHF RFID transponder
t; User 512 bit; TID 96 bit
it; User 128 bit; TID 96 bit
* Read ranges are theoretical values that are calculated for non-reflective
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
als may have an effect on performance.
© Confidex 2012
04-2013
fidex.com www.c
reflective
environment, in where antennas with optimum directivity are used with
maximum allowed operating power according to ETSI EN 302 208 (2W
On metal
MECHANICAL SPECIFICATION
Tag materials
Engineering plastics and synthetic
Background adhesive
High performance acrylic adhesive
Weight
2 g
Delivery
Single
Amount in box
1
Dimensions
38
ENVIRONMENTAL RESISTANCE
Operating temperature
-20°C to +
Ambient temperature
-20°C to +
IP classification
IP67
Chemical resistance
No physical or performance changes in:
-
-
Additionally, short time exposure resistant against
sulfuric acid. Acetone and sodium hydroxide should be
avoided.
Expected
Years in normal operating conditions
Values in
environmental conditions depends on the combination of all influencing
factors,
final suitability for certain environmental conditions is recommended to
be tested.
© Confidex 2012
w.confidex.com
On metal
MECHANICAL SPECIFICATION
Tag materials
Engineering plastics and synthetic
Background adhesive
High performance acrylic adhesive
Weight
2 g
Delivery format
Single
Amount in box
000pcs
Dimensions
38 x 13 x 4,5 mm
ENVIRONMENTAL RESISTANCE
Operating temperature
20°C to +70°C /
Ambient temperature
20°C to +70°C /
IP classification
IP67
Chemical resistance
No physical or performance changes in:
2 hour Salt water exposure (salinity 10%)
2 hour Motor oil exposure
Additionally, short time exposure resistant against
sulfuric acid. Acetone and sodium hydroxide should be
avoided.
Expected lifetime
Years in normal operating conditions
Values in the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
factors, exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental conditions is recommended to
be tested. Contact Confidex for more specific information.
MECHANICAL SPECIFICATION
Engineering plastics and synthetic
Background adhesive
High performance acrylic adhesive
format
mm / 1.5 x 0.5 x 0.17 in
ENVIRONMENTAL RESISTANCE
Operating temperature
70°C / -4°F to +158
Ambient temperature
70°C /-4°F to +158
Chemical resistance
No physical or performance changes in:
2 hour Salt water exposure (salinity 10%)
2 hour Motor oil exposure
Additionally, short time exposure resistant against
sulfuric acid. Acetone and sodium hydroxide should be
lifetime
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental conditions is recommended to
Contact Confidex for more specific information.
MECHANICAL SPECIFICATION
Engineering plastics and synthetic face layer
High performance acrylic adhesive
1.5 x 0.5 x 0.17 in
ENVIRONMENTAL RESISTANCE
4°F to +158°F
4°F to +158°F
No physical or performance changes in:
2 hour Salt water exposure (salinity 10%)
Additionally, short time exposure resistant against
sulfuric acid. Acetone and sodium hydroxide should be
Years in normal operating conditions
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental conditions is recommended to
Contact Confidex for more specific information.
face layer
2 hour Salt water exposure (salinity 10%)
Additionally, short time exposure resistant against
sulfuric acid. Acetone and sodium hydroxide should be
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental conditions is recommended to
Contact Confidex for more specific information.
sulfuric acid. Acetone and sodium hydroxide should be
the table are the best recommendations; resistance against
environmental conditions depends on the combination of all influencing
exposure duration and chemical concentrations. Thus, product’s
final suitability for certain environmental conditions is recommended to
2/
PERSONALIZATION OPTIONS
Pre-encoding
•
Customized data label
•
INSTALLATION INSTRUCTIONS
Steelwave Micro II
methods
•
•
•
To achieve the optimal performance in metal applications
please leave metal on the tag’s left side like shown in
image below. Ideally the tag is placed on
surface with direct metal contact underneath the whole
tag.
When mounting the tag with its adhesive background,
clean and dry the surface for obtaining the maximum bond
strength.
Ideal application temperature is from +21°C to +38°C
(+70°F to +100°F), bond strength can be improved with
firm application pressure and moderate heating from
+38°C to +54°C (+100°F to +130°F).
Installation at temperatures below 10°C (50°F) is not
recomm
/2
PERSONALIZATION OPTIONS
encoding
• Customer specific en
memory. Locking
Customized data label
• Customer specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
Steelwave Micro II
methods:
• High performance acrylic adhesive
• Hanging with tethering string
• Cable tie through the tag
To achieve the optimal performance in metal applications
please leave metal on the tag’s left side like shown in
image below. Ideally the tag is placed on
surface with direct metal contact underneath the whole
When mounting the tag with its adhesive background,
clean and dry the surface for obtaining the maximum bond
strength.
Ideal application temperature is from +21°C to +38°C
(+70°F to +100°F), bond strength can be improved with
firm application pressure and moderate heating from
+38°C to +54°C (+100°F to +130°F).
Installation at temperatures below 10°C (50°F) is not
recommended.
PERSONALIZATION OPTIONS
Customer specific encoding of EPC or user
memory. Locking permanently or with password
Customized data label
Customer specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
Steelwave Micro II can be attached with
High performance acrylic adhesive
Hanging with tethering string
Cable tie through the tag
To achieve the optimal performance in metal applications
please leave metal on the tag’s left side like shown in
image below. Ideally the tag is placed on
surface with direct metal contact underneath the whole
When mounting the tag with its adhesive background,
clean and dry the surface for obtaining the maximum bond
Ideal application temperature is from +21°C to +38°C
(+70°F to +100°F), bond strength can be improved with
firm application pressure and moderate heating from
+38°C to +54°C (+100°F to +130°F).
Installation at temperatures below 10°C (50°F) is not
co
PERSONALIZATION OPTIONS
coding of EPC or user
permanently or with password
Customer specific layout including logo, text,
numbers, barcodes etc.
INSTALLATION INSTRUCTIONS
can be attached with
High performance acrylic adhesive (included)
Hanging with tethering string
Cable tie through the tag
To achieve the optimal performance in metal applications
please leave metal on the tag’s left side like shown in
image below. Ideally the tag is placed on large even metal
surface with direct metal contact underneath the whole
When mounting the tag with its adhesive background,
clean and dry the surface for obtaining the maximum bond
Ideal application temperature is from +21°C to +38°C
(+70°F to +100°F), bond strength can be improved with
firm application pressure and moderate heating from
+38°C to +54°C (+100°F to +130°F).
Installation at temperatures below 10°C (50°F) is not
© Confidex 2012
contact@confide
coding of EPC or user
permanently or with password.
Customer specific layout including logo, text,
can be attached with several fixing
(included)
To achieve the optimal performance in metal applications
please leave metal on the tag’s left side like shown in
large even metal
surface with direct metal contact underneath the whole
When mounting the tag with its adhesive background,
clean and dry the surface for obtaining the maximum bond
Ideal application temperature is from +21°C to +38°C
(+70°F to +100°F), bond strength can be improved with
firm application pressure and moderate heating from
Installation at temperatures below 10°C (50°F) is not
© Confidex 2012
04-2013
fidex.com www.c
.
several fixing
To achieve the optimal performance in metal applications
please leave metal on the tag’s left side like shown in
large even metal
surface with direct metal contact underneath the whole
When mounting the tag with its adhesive background,
clean and dry the surface for obtaining the maximum bond
Ideal application temperature is from +21°C to +38°C
(+70°F to +100°F), bond strength can be improved with
firm application pressure and moderate heating from
Installation at temperatures below 10°C (50°F) is not
O
Product number
Product name:
Following product is available upon
For
support contact Confidex Ltd.
DISCLAIMER
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
IN GOOD FAITH,
THE RESULTS DESCRIBED
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY
HEREIN.
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
under end
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
© Confidex 2012
w.confidex.com
ORDER INFORMATION
Product number
Product name: Confidex
Following product is available upon
Product number:
Product name:
For other versions,
support contact Confidex Ltd.
DISCLAIMER
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
IN GOOD FAITH, CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
THE RESULTS DESCRIBED HEREIN WILL BE OBTAINED UNDER END
THE EFFECTIVENESS OR SAFETY OF ANY
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
FOR ANY LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
HEREIN.
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
under end-use conditions.
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
RDER INFORMATION
Product number: 3000587
Confidex Steelwave Micro II
Following product is available upon
Product number: 3000619
Product name: Confidex Steelwave Micro II
other versions, additional information and technical
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END
THE EFFECTIVENESS OR SAFETY OF ANY DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
use conditions. Nothing in this or any other document, nor any oral recommendation
or advice, shall be deemed to alter, vary, supersede, or
unless any such modification is specifically agreed to in a writing signed by Confidex.
Steelwave Micro II
Following product is available upon special request:
619
Steelwave Micro II
additional information and technical
support contact Confidex Ltd.
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
HEREIN WILL BE OBTAINED UNDER END-USE CONDITIONS, OR (ii) A
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
SERVICES, RECOMMENDATIONS OR ADVICE. EXCEPT AS PROVIDED IN CONFIDEX STANDARD
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO
LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
or any other document, nor any oral recommendation
or advice, shall be deemed to alter, vary, supersede, or waive any provision of this Disclaimer,
unless any such modification is specifically agreed to in a writing signed by Confidex.
Steelwave Micro IITM
M4QT
special request:
Steelwave Micro IITM
M4E
additional information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
SALE, WHICH ARE INCLUDED IN THE APPLICABLE DISTRIBUTOR OR OTHER SALES AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDITIONS, OR (ii) A
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
CONDITIONS OF SALE, CONFIDEX AND ITS REPRESENTATIVES SHALL IN NO EVENT BE RESPONSIBLE
LOSS RESULTING FROM ANY USE OF ITS MATERIALS, PRODUCTS OR SERVICES DESCRIBED
Each user bears full responsibility for making its own determination as to the suitability of
Confidex products, materials, services, recommendations, or advice for its own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
unless any such modification is specifically agreed to in a writing signed by Confidex.
additional information and technical
THE MATERIALS, PRODUCTS AND SERVICES ARE SOLD SUBJECT TO ITS STANDARD CONDITIONS OF
AGREEMENT.
ALTHOUGH ANY INFORMATION, RECOMMENDATIONS, OR ADVICE CONTAINED HEREIN IS GIVEN
CONFIDEX MAKES NO WARRANTY OR GUARANTEE, EXPRESS OR IMPLIED, (i) THAT
USE CONDITIONS, OR (ii) AS TO
DESIGN INCORPORATING ITS PRODUCTS, MATERIALS,
PROVIDED IN CONFIDEX STANDARD
RESPONSIBLE
DESCRIBED
Each user bears full responsibility for making its own determination as to the suitability of
own particular use.
Each user must identify and perform all tests and analyses necessary to assure that its finished
systems incorporating Confidex products, materials, or services will be safe and suitable for use
or any other document, nor any oral recommendation
waive any provision of this Disclaimer,
〒103-0023 東京都中央区日本橋本町三丁目8番４号 ユニゾ日本橋本町三丁目ビル 5階TEL: 03-5656-0355(代表) FAX: 03-5656-0356http://www.mightycube.co.jp
Related Documents
