This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Note: Works with Mechanical Interlocks, see page B-41 for additional information.
Features and Benefits
HBL2733SW
HBL2731SW
• Virtually eliminates bent and broken plug blades, leading to longer equipment life
• Extends life of mating receptacles by eliminating damage caused by insertion of bent blades
• Extra protection for personnel by significantly reducing chance of inadvertent contact with blades when connecting or disconnecting energized receptacles and connector bodies
• Reduces exposure to arcing when connecting or disconnecting plugs under load
• Compliance with California Code of Regulations, Title 8, Article 51, subsection 2510.7(b), which requires shrouding for devices exceeding 300 volts
Listed to UL Standard 498Certified to CSA Standard No.42 Fed. Spec. WC-596
Environmental
Moisture Resistance UL Type 4, 4X, 12, IP66 suitability Flammability (Enclosure) V0 per UL94 or CSA 22.2 No. 0.17 Operating Temperatures Maximum Continuous 75°C; Minimum -40°C (without impact)
Mechanical Interlock Switched Safety EnclosureDescription Catalog Number
Unfused mechanical interlock integrates a watertight safety shroud receptacle with a linked disconnect switch. See page B-41 for additional information.
For 20A and 30A Watertight Safety-Shroud Twist-Lock Receptacles and Inlets.
1" 5.67" (144.0)
4.44" (112.8)
4.05" (102.9)
3.91" (99.3)
2.35" (59.7)
4.92" (125.0)
30.00" BB2030N
Note: Hub is not included; order Raco part number 1704. This box meets IP67 requirement and Type 4X requirements when installed with a watertight conduit hub.
15° Angle Metallic Back Boxes
Description
NPT Hub Size
A Inch (mm)
B Inch (mm)
C Inch (mm)
D Inch (mm)
E Inch (mm)
F Inch (mm)
Cubic Inch Capacity Catalog Number
For 20A and 30A Watertight Safety-Shroud Twist-Lock Receptacles and Inlets.
¾" 5.13" (130.2)
4.00" (101.6)
4.19" (106.4)
3.75" (95.3)
3.00" (76.2)
4.00" (101.6)
30.00" BB201W
1" 5.13" (130.2)
4.00" (101.6)
4.19" (106.4)
3.75" (95.3)
3.00" (76.2)
4.00" (101.6)
30.00" BB301W
Metallic Feed Thru Back Boxes
Description
NPT Hub Size
A Inch (mm)
B Inch (mm)
C Inch (mm)
D Inch (mm)
E Inch (mm)
F Inch (mm)
Cubic Inch Capacity Catalog Number
For 20A and 30A Watertight Safety-Shroud Twist-Lock Receptacles and Inlets.
¾" 8.25" (209.6)
3.06" (77.8)
7.14" (181.4)
4.50" (114.3)
3.75" (95.3)
3.13" (79.5)
48.00" FT202W
1" 8.25" (209.6)
3.06" (77.8)
7.14" (181.4)
4.50" (114.3)
3.75" (95.3)
3.13" (79.5)
48.00" FT302W
Note: These boxes are cast aluminum and are finished with enamel paint. These boxes withstand a 500-hour salt spray test as well as UL raintight and external icing tests. NPT (metric designator).
55° Angle Metallic Adapter and Back Box
Description
NPT Hub Size
A Inch (mm)
B Inch (mm)
C Inch (mm)
D Inch (mm)
E Inch (mm)
F Inch (mm)
Cubic Inch Capacity Catalog Number
For 20A and 30A Watertight Safety-Shroud Twist-Lock Receptacles and Inlets.
1" 6.80" (172.4)
5.63" (142.9)
6.60" (167.0)
4.50" (114.3)
3.74" (95.0)
- 45.27" AB203055
55° Angle Metallic Adapter with Grounding Lug
Description
A Inch (mm)
B Inch (mm)
C Inch (mm)
D Inch (mm)
E Inch (mm)
F Inch (mm)
Cubic Inch Capacity Catalog Number
For 20A and 30A Watertight Safety-Shroud Twist-Lock Receptacles and Inlets.
4.89" (172.4)
3.33" (167.0)
4.29" (142.9)
3.75" (114.3)
2.50" (95.0)
- 25.00" AA203055
Straight Watertight Wall Box AdapterDescription Catalog Number
Adapts 20A and 30A Watertight Safety-Shroud Twist-Lock receptacles and inlets to 2-gang, device mount, FD boxes.
HBL2030AP
Non-Watertight Angle Wall Box AdapterDescription Catalog Number
Adapts 20A and 30A Watertight Safety-Shroud Twist-Lock receptacles to 1- or 2-gang standard wall boxes (4" or 4¹¹⁄₁₆" square).
Hubbell Watertight receptacles with lift covers provide an impact resistant UL Type 4X seal combined with corrosion resistant metallic components. These universal covers can house any NEMA listed straight blade receptacles as well as any NEMA listed Twist Lock receptacles. The Watertight receptacles can either be mounted to FD/FS boxes (see page C-9) or panel mounted to a flat surface. Combined, this makes a diversified product with the high quality needed in industrial, wet and wash down applications.
(2) 1" NPT Hubs, Box/Adapter Kit, White HBL60CM84WAK
(2) 1" NPT Hubs, Box/Adapter Kit, Gray HBL6084AK
Cov
ers Blank Cover Plate, Yellow HBL60CM88
Blank Cover Plate, White HBL60CM88W
Blank Cover Plate, Gray HBLP14FSHBL60CM88W
HBL60CM88
HBLP14FS
HBL60CM55
HBL60CM83A
Features and Benefits
Hubbell FD boxes and angled adapters are made of high impact resistant material. They are the only NEC compliant box system that has enough wiring room for a 50A Twist Lock device. The stainless steel mounting and grounding bracket provides corrosion resistance, necessary in direct wash down applications. The FD Boxes are UL Type 4X rated when used with Watertight Lift Covers, i.e. HBL6500 or HBL6700 as well as with a blank plate such as HBL60CM88. The box and angled adapter can either be purchase separately or as a kit. The FD box and Adapter can be used with any single or duplex receptacle up to 50A Twist Lock.
FD Boxes and Angled Adapters
Housing Design• 30 cu. in. FD box made of high impact
The GFCI protected FD box provides a UL Type 4X GFCI enclosure made for wet and damp locations for 30A 120V and 240V Watertight receptacles. The GFCI response time does not exceed .025 seconds ensuring a safe circuit shut down if the current were to deviate from its path. Auto resetting GFCI box, when connected to an FD box by utilizing a PolyTuff® liquid tight conduit provides advanced safety features for Watertight devices.
GFCI Protected FD Box
GFCI Housing Design• UL enclosure Type 4X, for wet and
damp locations. Components are UL and CSA listed
• 30A, 120V and 240V with auto reset• GFCI response time is .025 sec. Max.• Grounded neutral protection trips if
ground and neutral touch at load side
FD Box• Utilizes PolyTuff® liquidtight conduit
and fittings• UL enclosure Type 4X, for wet and
damp locations. Components are UL and CSA listed
• For use with single and duplex watertight receptacles (single phase only)
The thermoplastic elastomer material of the Portable Outlet Box provides a strong housing with enough capacity for multiple devices to fit, with cord feed through options available. The impact resistant PBT covers add to the durability of the box and the devices inside. There are several cord connectors available ranging from standard to deluxe, providing unmatched strain relief. The covers provide a UL Type 3R weather resistant seal suitable for wet and damp locations. Portable Outlet Boxes are available as pre-assembled or can be configured as needed.
Portable Outlet Boxes and Covers for Boxes and Panels
Specifications for Heavy Duty Portable Outlet Boxes and Cover PlatesUL Listed UL 514C, UL467 and UL50 Enclosures Types 1, 3R.CSA Certified C22.2 No. 18 and C22.2 No. 94 Enclosures Types 1, 3R and C22.2 No. 0.4 (Impedance).Box Specifications: Moisture Resistance Wet and damp locations, Enclosure Type 3R when used with weatherproof cover plates. Dry, indoors locations, Enclosure Type 1 with all other cover plates. Flammability UL 94V-0, 94-5VA classification. Operating Temperature 80°C maximum; -35°C minimum. UV Resistance All materials are UV stabilized. Impact and Crush Resistance in accordance with UL 514C, UL50, C22.2 No. 18 and C22.2 No. 94. Material Valox®.Cord Connector Materials Nylon nut; Nylon Gotcha® ring; Neoprene grommet.Cord Diameter Range .38" to .75" diameter.Bonding Strap Material Brass.Threaded Inserts Brass.Grounding Screw Material Brass.Indoor Cover Plate Screws Material Zinc Plated Steel.Outdoor Cover Plate Screws Material Stainless Steel.Cover Plate Gasket Material UL recognized closed-cell foam (aging and oil resistant).
Dimensions
Valox® is a trademark of SABIC Innovative Plastics, acquired from General Electric Company.
Heavy Duty Portable Outlet Boxes and Cover PlatesDescription Catalog Number
Box with cord strain relief, with one blank cover plate.Box with cord strain relief, with one blank cover plate, black.Box with cord strain relief, with two duplex (indoor) cover plates.Box with cord strain relief, with two duplex (indoor), yellow cover plates. Blank, non-metallic FS cover plate with foam gasket, gray.Duplex, non-metallic FS cover plate, gray.Duplex, non-metallic FS cover plate, yellow.Single receptacle (1.39"), non-metallic FS cover plate, gray.Single receptacle (1.56"), non-metallic FS cover plate, gray.Rectangular opening, non-metallic FS cover plate, gray.
PerformanceElectricalDielectric Voltage Connectors: Plugs:Max Working VoltageCurrent InterruptingTemperature Rise
2000V AC if rated 300V or less; 3000V AC if rated above 300V2500V AC if rated 300V or less; 3500V AC if rated above 300VAs markedRated for current interruption per UL49830°C max per UL498 at rated current
MechanicalCord and terminal accommodations:Plugs and Connectors
15 and 20A Straight Blade and 15A Locking
20A Locking Except HBL26W09 & HBL27W09
30A Locking Including HBL26W09 & HBL27W09
16/3 SJ to 10/3 SJ, 18/3 S to 12/3 S, (Ø.325" to Ø625") (Ø8.3mm to Ø15.9 mm)
Min Cords: 12/3 SJ, 16/3 S, 14/4 SJ, 18/4 S, 18/5 S, (Ø.375") (Ø9.5 mm) Max Cord: 8/3 S, 8/4 S, 10/5 S (1.125") (28.6 mm)
Receptacles – use solid or stranded building wire or flexible cord only as outlined below:All Straight Blade 15A Locking 20A and 30A Locking
18 AWG to 10 AWG18 AWG to 10 AWG18 AWG to 8 AWG
Portable Outlet Boxes
Cord RangeWiring Volume
.38" to .68" (HBL3099, HBL3090F, HBL3000) and .38" to 1.00" with user-specified cord connector19.0 in3
EnvironmentalMoisture Resistance
Flammability
Operating TemperaturesUV Resistance
UL Listed to 3R, 3RX, 4, 4X, 6, 6P, 12 (Plugs and connectors); 3R, 3RX, 4, 4X (Receptacles); Wet and Damp Locations (Portable outlet boxes); Covers (POB) UL Type 3R and Wet Locations cover closedUL94V0 (boxes, covers, and plates); UL94V2 (Plugs, connectors, and interiors); UL94HB (Caps, bushings, and cone seals)-40°C (without impact) to +60°C continuousAll exposed materials are UV stabilized