Top Banner
www.voestalpine.com/nortrak voestalpine Nortrak Inc. Switch Stands
4

Switch Stands - Voestalpine · 336 with Cover COLUMN SWITCH STAND 112-E, 112-G AND 31-B An enclosed and simple design for yard or industrial switches from 60lb and heavier. voestalpine

Jul 11, 2020

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Switch Stands - Voestalpine · 336 with Cover COLUMN SWITCH STAND 112-E, 112-G AND 31-B An enclosed and simple design for yard or industrial switches from 60lb and heavier. voestalpine

www.voestalpine.com/nortrakvoestalpine Nortrak Inc.

Switch Stands

Page 2: Switch Stands - Voestalpine · 336 with Cover COLUMN SWITCH STAND 112-E, 112-G AND 31-B An enclosed and simple design for yard or industrial switches from 60lb and heavier. voestalpine

22-E Trihandle

36-E Trihandle

» Can be trailed or thrown manually

» When a train runs through the switch, switch points are opened by wheel flanges, and then throw is completed automatically

» During automatic trailing, the target rotates so that the switch point position is indicated, while the hand lever remains stationary

» Ergonomically designed for operator safety

» Grasp point 30” above the ground

» Typical 180 degree movement reduced to 120 degrees

The RACOR® trailable 22-E and 22-EH are extra heavy duty trailable switch stands for yard, ladder and busy switch turnouts where trains often run through switches.

The RACOR® non-trailable 36-E and 36-EH are extra heavy duty switch stands for unrestricted use.

36-E Elevated Ball Handle

» 36-E most often used in yard operations. 36-EH, with high mast and target, is suitable for mainline use

ADVANTAGES

» All models constructed of identical extra heavy cast housing and heat-treated operating parts using high strength steel where applicable

» The extra large bearing surfaces of the wearing parts assure long life and a minimum of lost motion

» Adjustable connecting rod and crank eye permit accurate setting of the points without respiking the stand

» Available with low mast and target (22-E) or high mast and target (22-EH)

» Available with Trihandle or elevated Ball handle or straight handle

» Replacement parts readily available

» For power operation, the model 22 stand can be paired with the AUTOMATER® HT, AUTOMATER® HP, or Hydraulic Switch Machine.

SWITCH STANDS

Page 3: Switch Stands - Voestalpine · 336 with Cover COLUMN SWITCH STAND 112-E, 112-G AND 31-B An enclosed and simple design for yard or industrial switches from 60lb and heavier. voestalpine

SWITCH STAND 336-EC

» Positions operator either parallel (112-E) or perpendicular (112-G) to the track

» Model 31-B is identical to the 112 models except that it uses a sealed design, keeping the spindle free of ice and snow

» Unique design prevents spindle and hand lever from becoming disengaged from the bracket. Double protection is provided against dropping of the spindle

» Both models constructed of identical extra heavy cast housing and heat-treated operating parts using high strength steel where applicable

» The extra large bearing surfaces of the wearing parts assure long life and a minimum of lost motion

» Adjustable connecting rod and crank eye permit accurate setting of the points without respiking the stand

» Replacement parts readily available

The RACOR® 112-E and 112-G are extremely rugged, column-type mainline switch stands.

The RACOR® design 336-EC is an enclosed, parallel, grounded switch stand.

» For tongue or embedded switches

» A large hinged cover completely encloses the top of the stand

» Adjustable crank for ease of throw

» Constructed of extra heavy cast housing and heat-treated operating parts using high strength steel where applicable.

» Available with rigid or spring connecting rods

» Available with boxes for enclosing connecting and switch rods

» Replacement parts readily available

» Long resilient spring provides minimum shock when trailed

» Long resilient spring provides adequate holding power for closed switch

» Recommended for use with parallel throw adjustable switch stand

SPRING CONNECTING ROD ENCLOSED TYPE

336 without Cover

336 with Cover

COLUMN SWITCH STAND 112-E, 112-G AND 31-B

An enclosed and simple design for yard or industrial switches from 60lb and heavier.

Page 4: Switch Stands - Voestalpine · 336 with Cover COLUMN SWITCH STAND 112-E, 112-G AND 31-B An enclosed and simple design for yard or industrial switches from 60lb and heavier. voestalpine

voestalpine Nortrak is a member of the VAE GmbH group of companies. With sales and production companies in over 20 countries across the world, the group has a depth of trackwork knowledge unrivalled by any other producer. www.voestalpine.com/vae

VAE GmbH is, in turn, a wholly owned subsidiary of voestalpine AG. Dedicated to innovation and technological excellence, the voestalpine group consists of some 360 facilities in over 60 countries worldwide. www.voestalpine.com

U S A

Birmingham, AL

Cheyenne, WY

Chicago Heights, IL

Decatur, IL (Foundry)

Newton, KS

Pueblo, CO

C A N A D A

Richmond, BC

M E X I C O

NORTRAK-DAMY

Guadalajara, JA www.damy.com

Nortrak is able to draw on a world of experience and knowledge.Visit our corporate web site: www.voestalpine.com/nortrak. Select Company then Contacts for a list of official contacts.

voes

talp

ine

No

rtra

k In

c. S

witc

h St

and

Bro

chur

e 20

17

Prin

ted

in C

ana

da