Top Banner
Copyright J. A. Storer Switch Board Burr Designed by Jim Gooch, made by Eric Fuller, level 9. (Pau Amerillo / Wenge / Bocote, 3 inches) The pieces consist of a "block", two identical "rods" in symmetric orientations, and two identical "plates" in symmetric orientations. Orientate the puzzle as shown on the left below (the right rod will drop down as shown if the puzzle is not too tight), exchange the plates by passing them through each other, then the right plate (which was the left plate) can be twisted (in two ways) and removed (or without twisting it can be slid out together with the right rod).
1

Switch Board Burr - Brandeisstorer/JimPuzzles/... · (Pau Amerillo / Wenge / Bocote, 3 inches) The pieces consist of a "block", two identical "rods" in symmetric orientations, and

Nov 05, 2020

Download

Documents

dariahiddleston
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Switch Board Burr - Brandeisstorer/JimPuzzles/... · (Pau Amerillo / Wenge / Bocote, 3 inches) The pieces consist of a "block", two identical "rods" in symmetric orientations, and

Copyright J. A. Storer

Switch Board Burr

Designed by Jim Gooch, made by Eric Fuller, level 9.

(Pau Amerillo / Wenge / Bocote, 3 inches) The pieces consist of a "block", two identical "rods" in symmetric orientations, and two identical "plates" in symmetric orientations. Orientate the puzzle as shown on the left below (the right rod will drop down as shown if the puzzle is not too tight), exchange the plates by passing them through each other, then the right plate (which was the left plate) can be twisted (in two ways) and removed (or without twisting it can be slid out together with the right rod).