1 Low Profile “Swing-Lock” Board to Wire Connector for Power DF57 Series 2013.3 Contact Structure Incorrect Positioning ■Features 1.Reinforced lock structure with swing lock A swing-lock structure, featuring our own unique connection method, reinforces the lock structure of the electric cable side, with a structure resistant to tough electric cable routing and disengagement of cables under load. In addition, the connection surface has a guide insertion to facilitate insertability (patented) 2.Header Lock Improves Plug Retention When connecting, the header connector secures the molded- lance. Play of molded lance is prevented for added strength. (patented) 3.Highly reliable contact structure Despite the low-profile design, with a stacking height of 1.4mm, an effective mating length of 0.42mm is achieved. The structure features two-point contact terminal geometry with high contact reliability. 4.Insert guide key prevents misalignment Insert guide key guides the crimp socket to the correct mating position and prevents misalignment, which improves mating operation and prevents possible connector breakage with incorrect mating. 5.Solder wicking prevention The integral molding eliminates any gap between the terminals and case to prevent solder wicking. 6.Case disengagement prevention Reinforcing hardware (metal fittings) are integrated in the molding, which help prevent the case from disengaging with the terminals due to tough electric cable routing and load. 7.Cost countermeasure Terminals and metal fittings are collectively integrated into the molding to reduce assembly cost. Before mating After mating Lock portion Mated HeightA : DF57H 1.4mm DF57AH 1.6mm A 4.65mm Cross-sectional view of the contact surface Two point contact terminals Effective mating length 0.42mm Insert Guide Key Structure Positive Lock Insert Guide Key Insert guide key touches to the header prior to the positive lock, which guides the socket to the correct mating position. Swing-Lock Structure explanatory drawing Starts mating after the socket is aligned to the correct position
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
Low Profile “Swing-Lock” Board to Wire Connector for PowerDF57 Series
2013.3
Contact Structure
Incorrect Positioning
■Features
1.Reinforced lock structure with swing lockA swing-lock structure, featuring our own unique connection method, reinforces the lock structure of the electric cable side, with a structure resistant to tough electric cable routing and disengagement of cables under load.In addition, the connection surface has a guide insertion to facilitate insertability (patented)
2. Header Lock Improves Plug Retention When connecting, the header connector secures the molded-lance. Play of molded lance is prevented for added strength. (patented)
3. Highly reliable contact structure Despite the low-profile design, with a stacking height of 1.4mm, an effective mating length of 0.42mm is achieved. The structure features two-point contact terminal geometry with high contact reliability.
4. Insert guide key prevents misalignmentInsert guide key guides the crimp socket to the correct mating position and prevents misalignment, which improves mating operation and prevents possible connector breakage with incorrect mating.
5. Solder wicking prevention The integral molding eliminates any gap between the terminals and case to prevent solder wicking.
6. Case disengagement prevention Reinforcing hardware (metal fittings) are integrated in the molding, which help prevent the case from disengaging with the terminals due to tough electric cable routing and load.
7. Cost countermeasure Terminals and metal fittings are collectively integrated into the molding to reduce assembly cost.
Before mating
After mating
Lock portion
Mated HeightA : DF57H 1.4mm DF57AH 1.6mm
A
4.65mm
Cross-sectional view of the contact surface
Two point contact terminals
Effective mating length0.42mm
Insert Guide Key Structure
Positive LockInsert Guide Key
Insert guide key touches to the header prior to the positive lock, which guides the socket to the correct mating position.
Swing-Lock Structure explanatory drawing
Starts mating after the socket is aligned to the correct position
2
DF57 Series●Low Profile “Swing-Lock” Board to Wire Connector for Power
■Specifications
Rating
Current rating
2pos. 3pos. 4pos. 5,6pos.
Operating temperature range -35ç to 85ç (Note 1)Operating humidity range 20% to 80%
AWG26 _ _ _ 1.5A
AWG28 2.5A 2.0A 1.5A
AWG30 1.5A 1.0A
AWG32 1.0A 0.8A
AWG34 0.8A 0.5A
Voltage rating2 to 6 pos. :50V AC/DC2 pos. (Middle pin of 3 pos. is removed): 100V AC/DC
Storage temperature range -10ç to 60ç (Note 2)Storage humidity range 40% to 70% (Note 2)
UL-CSA certified specifications
RatingCurrent rating
2pos. 3pos. 4pos. 5,6pos.
AWG26 _ _ _ 1.5A
AWG28 2.5A 2.0A 1.5A
AWG30 1.5A 1.0A
AWG32 1.0A 0.8A
AWG34 0.8A 0.5A
Voltage rating 2~6 pos. :50V AC/DC
Item Specification Conditions1. Insulation
resistance100 Mø min. 100 V DC
2. Withstanding voltage
No flashover or insulation breakdown 500 V AC / 1 minute
3. Contact resistance
10 mø max. 20 mV max., at 1 mA.
4.VibrationNo electrical discontinuity of 1 μs or longerNo damage, cracks or parts dislocation.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 10 cycles, 3 direction
5.ShockNo electrical discontinuity of 1 μs or longerNo damage, cracks or parts dislocation.
Acceleration of 490 m/s2, 11 ms duration, sine half-wave, 3 cycles in each of the 3 axis
6.HumidityContact resistance: 20 mø max., Insertion resistance:500Mø min.No damage, cracks or parts dislocation.
96 hours at of 40 ±2ç, and humidity of 90 to 95%
7. Temperature cycle
Contact resistance: 20 mø max.,Insulation resistance: 500 Mø min.No damage, cracks or parts dislocation.
-55°C → 5 to 35°C → 85°C → 5 to 35°CTimes: 30 min. → 2 min. to 3 min. → 30 min. → 2 min. to 3 min.
5 cycles
8.DurabilityContact resistance: 20 mø max.,No damage, cracks or parts dislocation.
30 cycles
9. Resistance to soldering heat
No deformation of components affecting performanceReflow: At the recommended temperature profile Manual soldering: 350°C for 3 seconds
Note 1. Includes temperature rise caused by current flow.Note 2. The term "storage" refers to products stored for a long period prior to mounting and use. The operating temperature and humidity range covers the non-conducting condition of installed connectors in storage, shipment or
during transportation.Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications
for a specific part number shown.
■MaterialProduct Part Material Finish Remarks
HeaderInsulator LCP Color:Black UL94V-0
Contacts Brass Tin Plated ---------
Crimp socket Insulator PBTDF57H:White
DF57AH:BlackUL94V-0
Crimp contacts Contacts Phosphor bronze Tin Plated ---------
3
DF57 Series●Low Profile “Swing-Lock” Board to Wire Connector for Power
■Ordering informationRefer to the below information to identify the specifications of the product by its part No. For order placement, select the part No. from the lists shown in the page 4 to 6.
●Header
●Socket
●Crimp contact
❶ Series name :DF
❷ Series No. :57
❸ Insert guide key H : Yes
❹ Number of contacts:2, 3, 4, 5, 6
❺ Connector type P:Plug
❻ Contact pitch :1.2mm
❼ Termination section V :Straight SMT
❶ Series name :DF
❷ Series No. :57
❸ Applicable wire size:
Blank : AWG28 to AWG34
❹ Insert guide key
H : Yes
❺ Number of contacts:2, 3, 4, 5, 6
❻ Connector type
S :Crimp socket
❼ Contact pitch :1.2mm
❽ Termination section
C :Crimp socket
❶ Applicable wire size:
2628:AWG26 to AWG28
2830:AWG28 to AWG30
3234:AWG32 to AWG34
❷ Packaging
SCF :SCF: Female crimp contact / reel
❹ Number of contacts :2 ❻ Contact pitch : 2.4mm
(Middle pin of 3 pos. is removed, and rated voltage is 100 V)
❸ Applicable wire size:
A :AWG26 to AWG34
❺ Number of contacts :5, 6
DF 57 H − * P − 1.2 V❶ ❷ ❸ ❹ ❺ ❻ ❼
DF 57 H − * S − 1.2 C❶ ❷ ❸ ❹ ❺ ❻ ❼ ❽
DF 57 − 2830 SCF❶ ❷
DF 57 A H − * S − 1.2 C❸ ❺
DF 57 H − 2 P − 2.4 V❹ ❻
4
DF57 Series●Low Profile “Swing-Lock” Board to Wire Connector for Power
[Specification number] (21): Tin plated, Embossed tape
packaging (5,000 pieces per reel)
[Specification number] (21): Tin plated, Embossed tape
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.The contents of this catalog are current as of date of 03/2013. Contents are subject to change without notice for the purpose of improvements.
Header
DF57H DF57
Socket
DF57H DF57 DF57H DF57
Mating compatibility Y Y N Y
Additional guiding keys
Y N - N
DF57HDF57HDF57HDF57HDF57H
1
NEW2mm Pitch, Multi functional Connector System.(Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
DF59 Series
2012.5
■Features 1. Floating Structure (Board-to-Board)
The Board-to-Board connector can be used to connect multiple boards together in a co-planar arrangement and features a “Stress free contact” that floats ± 0.5mm in the X, Y and Z dimensions to allow for thermal expansion.
2. Swing Lock Structure (Wire-to-Board)The DF59 features a “swing-lock” mechanism that employs both a positive and friction lock. This helps to prevent the cable assembly from unmating in demanding applications.
3. Short-Circuit Pin ConnectorThe Short-Circuit Pin connector allows the termination of an open circuit. Typically used at the end of a series of connected circuit boards.
4. Multi Function DesignThe DF59 has the ability to function as either a Board-to-Wire or Board-to-Board System. The PCB mounted receptacle is designed to mate with the B-to-W, B-to-B, and Short Circuit Pin connectors. This multi function ability allows versatility while keeping connectors to a minimum.
5. Performance and Space Savings The DF59 series offers high performance in a compact, space saving design; featuring a 3 amp current rating, a 2mm pitch and coupled with a mated height of only 2.48mm.
6. Contact DesignThe terminal’s design features two points of contact to ensure a highly reliable connection.
7. High Operating Temperature DF59’s are rated at temperatures up to 105 ç.
8. Applicator Sharing Crimping can be performed using the applicator (AP105-DF11-22S) for the existing series DF11-22S C F(A), by replacing the die with the one for DF59 series.* For crimping quality standards and crimping conditions, crimping needs to be performed in accordance with the specific conditions of DF59-22PCFA.
■Applications The DF59 connector is extremely effective in LED lighting applications. However, it does not need to be limited to LED work, but can be used in other traditional Board-to-Wire applications.
±0.5mm±0.5mm
Normal Mating Direction of X Axis
Direction of Y Axis Direction of Z Axis
Z
Z3 axial directions
X
Y
Y
X
Mated
±0.5mm
Current Circuit
Strengthened Lock
Simple Lock 2.48mm
◆Floating Structure in Three Axial Directions (Board-to-Board Structure)
◆Short Pin Connector
◆Swing-Lock Structure (Board-to-Wire Structure)
2
DF59 Series●2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
■Product Specifications
Ratings
Current rating 3AOperating Temperature
Operating Humidity Range
-35~105ç (Note 1)
20~80%
Voltage ratingAC/DC 230VAC/DC 350V (Without the central contact)
Storage Temperature Range
Storage Humidity Range
-10~60ç (Note 2)
40~70% (Note 2)
Items Specifications Conditions
1.Insulation resistance Over 1000Mø Measured at DC 500V
2.Withstanding voltage No flashover or breakdown AC650V / minute.
3.Contact resistance50mø or less (DF59-*P-2FC/SP) 30mø or less (DF59-*P-2C)
Under 6V DC, must be Measured by 100Ma (DC or 1000Hz)
4.Vibration No electrical discontinuity over 1μs.Frequency 10-55Hz, single amplitude 0.75mm,
3 directions, 10 cycles each
5.Shock No electrical discontinuity over 1μs.Acceleration 490 m/s2, 11ms; duration, sine half-wave3 cycles in each of the 3 axis.
6.Humidity
■Contact resistance 50mø (DF59-*P-2FC/SP) max.30mø (DF59-*P-2C) max.Insulation resistance1000Mø min
Temperature 40 ± 2ç, humidity 90-95%, left for 96 hours
(-55ç: 30 min. ➝ 5-35ç: 2-3 min. ➝85ç: 30 min. ➝5-35ç: 2-3 min.) 5 cycles
8. Operating Life ■Contact resistance
50mø max. (DF59-*P-2FC/SP)30mø max. (DF59-*P-2C)
■Number of insertion and withdrawal force 30times (DF59-*P-2FC/C)10times (DF59-*P-2SP)
9. Resistance to soldering heat
No solubility of resin which affect the item’s performance.
Reflow: Depends on recommended temperature profile. Hand soldering: Soldering iron temperature 350 ± 10ç, 3 sec.
(Note 1) Including temperature rise caused by current flow.(Note 2) The term ”storage” refers to products stored for long period of time prior to mounting and use.
Operating temperature and humidity range covers connectors after installation, storage, shipment or dur ing transportation.(Note 3) Information contained in this catalog represents general requirements for this series.
Contact us for drawings and specifications for a specific part number.
■MaterialsItems Parts Materials Treatment UL Specification
* DF59-2S-4V(51) is created by removing the middle pin of DF59-3S-2V(51) at the factory. (Note) Please order in full reel quantities. (1 reel = 2000 pieces)
Extraction Direction
F
F GG
G-G(FREE)
F-F(FREE)
45
12±0.1
4±0.12±0.1
(24)
1.75
±0.
1
11.5
±0.
1
22.2
5+
0.2
0
Ø1.5+0.
10
5
DF59 Series●2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
Product Number HRS No. # of connectors A B Packaged Quantity/Tray
DF59-2P-2FC(50) CL667-0006-4-50 2 7.2 2.0 50
DF59-3P-2FC(50) CL667-0007-7-50 3 9.2 4.0 50
DF59-4P-2FC(50) CL667-0008-0-50 4 11.2 6.0 50
DF59-2P-4FC(50) CL667-0020-5-50 2* 9.2 4.0 50
* DF59-2P-4FC(50) is created by removing the middle pin of DF59-3P-2FC(50) at the factory. (Note) Please order in full tray quantities. (1 tray = 50 pieces)
6
DF59 Series●2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
DF59-22PCA CL667-0022-0-00 Loose contact (Note 2) 100 contacts per pack
(Note1) Please order reel contacts by full reel quantities. (1 reel = 10000 pieces)(Note2) Please order loose piece contacts in full bags. (1 bag = 100 pieces)
Hirose assumes no liability for customers using tooling from non-recognized sources.
●Recommended WireUL1061, UL3265
●Strip Length1.7~2.3mm
It is possible to use tooling fromthe AP105-DF11-22S applicator.Certain parts will need the bechanged out. Please contact Hirose for details.
(Note) Please contact your nearest Hirose Sales Representative for information regarding compatible wire Remarks: Please consult with our sales representative when using wires other than applicable wire.
8
DF59 Series●2mm Pitch, Multi functional Connector System. (Floating [Board-to-Board], Swing-Lock [Wire-to-Board], Short Pin)
■Operating Precautions1. Recommended Temperature Profile
(Lead-free soldering possible)
2. Recommended Hand Solder Conditions Soldering iron temperature: 350 ± 10ç, soldering time: within 3 seconds
3. Recommended Screen Thickness, Open Ratio (Pattern Area Ratio)
Thickness 0.1 mm, Open ratio: 100%
4. Warpage of PC board Maximum of 0.02mm at the connector center, with both ends of the connector as reference points.
5. Cleaning Condition Cleaning with IPA is possible. (Cleaning is not recommended. In case of cleaning, please evaluate if it causes a decrease in the performance which includes mechanical operation and environmental resistance.)
6. Precautions ■ When inserting crimp-type (solderless) terminals to crimping (solderless)sockets, to maintain reliable performance, please do not insert obliquely.
■ DO NOT mate/un-mate a non-terminated plug with a non-mounted receptacles. This may lead to damage or deformation of the contacts.
■ Please note that pulling on the wires or cable during un-mating may cause damage.
■ DO NOT apply flux to the contact terminals when hand soldering the receptacle to the board. Flux can wick into the electrical contact areas and may lead to connection failures.
■ Slight discoloration on the insulating materials will not affect form, fit or function of the connectors.
■ For operating suggestions on insertion and removal, please refer to the “DF59 Insertion and Removal Manual”
[Applicable Conditions]1. Peak Temperature: MAX 250ç2. Heated Area: 220ç or above, within 60 sec.3. Pre-heating Area: 150-180ç, 90-120 sec.4. Number of Times: within 2 times*Measured at contact lead areaPlease be noted that the reflow condition may vary depending on solderingpaste type, manufacturer of soldering material, board size, as well as conditions of other mounting materials.(*1) Above temperature profile is our recommended value.
50
60sec MAX
100
150
200
250
0
TE
MP
ER
AT
UR
E(ç)
PRE-HEATING TIME SOLDERING TIME
TIME(sec)90~120sec
180ç
220ç
10sec MAX
MAX 250ç
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.The contents of this catalog are current as of date of 05/2012. Contents are subject to change without notice for the purpose of improvements.
1
Board-to-Wire Swing-Lock Connector for Low-Profile Power SourceDF61 Series
2013.4②
■Features 1. Reinforced Swing Lock Structure
Our unique swing-lock structure cradles the wire side plug and resists the plug from becoming disengaged due to handling strain or loads.
2.Header Lock Improves Plug RetentionDuring mating, the header lock engages with the plug assembly. The lock is reinforced with metal which adds strength to the lock and increases the retention between the header and the plug.
3. Compact Size- High Voltage The compact 2.2 mm pitch connector has a voltage rating of 350V due to the long creep distance.
4. Solder Wicking PreventionHeader is molded in one piece. This ensures a tight fit between the contact and the header and prevents solder wicking.
5.High Current of MAX 5 Amps (AWG22)A highly conductive material is used for the contacts. The material provides for a high current flow by reducing the contact resistance.
■Applications Digital cameras, digital video cameras, LED lights, laptop computers, tablet computers, portable devices, power supply equipment, etc.
Isolated Male Contacts
2.2mm
An integrated wall between the contacts maximizes the creepage distance for higher voltage capabilities.
Swing-Lock Structure Illustration
Maximum Creep Distance
The protrusion on the bottom side of the socket fits into a corresponding recess on the header. This aligns the socket into the correct mating position.
Recess
Header
Socket
Header lock
Protrusion
Before Mating
Reinforced with Metal
The metal fitting is partly molded
in the header’s housing lock.
Tensile strength of the cable:
10N or greater
The Header pushes downthe protrusion of the socketand locks it in place.
Header Lock
Metal
After Mating
2
DF61 Series●Board-to-Wire Swing-Lock Connector for Low-Profile Power Source
■Product Specifications
Ratings
Current rating
3.2A (with AWG26)
4A (with AWG24)
5A (with AWG22)
Operating Temperature Range
Operating Humidity Range
-35~85ç (Note 1)
20~80%
Voltage rating AC/DC 350VStorage Temperature Range
Storage Humidity Range
-10~60ç (Note 2)
40~70% (Note 2)
Items Specifications Conditions
1. Insulation resistance 1000Mø or greater Measured at DC 500V
2. Withstanding voltage No flashover or breakdown AC1700V applied for one minute
3. Contact resistance 10mø or less Measured at 20mV or less, 1mA
4. Vibration resistance No electric outage of 1μs or moreFrequency 10-55Hz, half amplitude 0.75 mm, 10 cycles for
each of 3 directions
5.Shock resistance No electric outage of 1μs or moreAcceleration 490 m/s2, 11ms; half sin wave: 3 each for 3 directions
6. Humidity resistanceContact resistance 20mø or less, insulation
resistance 500Mø or greaterTemperature 40 ± 2ç, humidity 90-95%, left for 96 hours
7. Temperature cycleContact resistance 20mø or less insulation resistance 500Mø or greater
8. Insertion/extraction life Contact resistance20mø or less Insertion/extraction: 30 times
9. Solder heat resistance No melting of resin part affecting performanceReflow: Per recommended temperature profileHand solder: Manual soldering iron 350±10ç for 3 seconds
(Note 1) Includes temperature elevation by conduction. (Note 2) The term “storage” refers to the long-term storage conditions of unused connectors before PCB mounting. The operating
temperature range applies to connectors in non-conduction state after PCB mounting or those in temporary storage during transportation, etc.
(Note 3) The above specifications are representative for this series. Please refer to “delivery specifications” for official individual agreement.
■MaterialsProduct Part Material Treatment Specification
HeaderInsulator LCP resin Red UL94V-0
Contact Brass Tin plated –––
Crimp Socket Insulator PBT Red UL94V-0
Crimp contact Contact Copper Alloy Tin plated –––
3
DF61 Series●Board-to-Wire Swing-Lock Connector for Low-Profile Power Source
■Product Number Structure See Pages 4-6 of this catalog to select and order specific items.
● Header
●Crimp Housing
●Contact
❶ Series Name: DF
❷ Series No.: 61
❸ Number of contacts: 2
❹ Type of connector
P: Header
❺ Pitch: 2.2mm
❻ Termination form
V: SMT straight type
❶ Series Name: DF
❷ Series No.: 61
❸ Number of contacts: 2
❹ Type of connector
S: Socket
❺ Pitch: 2.2mm
❻ Termination form
C: Crimp case
❶ Applicable Wire Size
2628:AWG# 26-28
2226:AWG# 22-26
❷ Form Type/Package Type
SCF: Socket crimp contact/reel
DF 61 − * P − 2.2 V❶ ❷ ❸ ❹ ❺ ❻
DF 61 − * S − 2.2 C❶ ❷ ❸ ❹ ❺ ❻
DF 61 − 2628 SCF❶ ❷
4
DF61 Series●Board-to-Wire Swing-Lock Connector for Low-Profile Power Source
Note: Problems resulting from the use of non-authorized tools will not be warranted.
7
DF61 Series●Board-to-Wire Swing-Lock Connector for Low-Profile Power Source
■Operating Precautions1. Recommended Temperature Profile
(Lead-free soldering possible)
2. Recommended Hand Solder Conditions Soldering iron temperature: 350 ± 10℃, soldering time: within 3 seconds
3. Recommended Screen Thickness, Aperture
Opening Rate (Pattern Area Ratio)Thickness 0.1 mm, aperture opening rate: 100%
4. PCB WarpageMax 0.02 mm at the center of connector with the both edges of the connector as the baseline
5. Cleaning ConditionCleaning with IPA is possible. (Cleaning is not recommended as it may change the feel of insertion/extraction, etc. Please consult with us when using other types of cleaning agents.)
6. Precautions ■ In order to maintain the performance reliability, do not insert the crimp contact
into the crimp socket at a slant angle.
■ Insertion/extraction of the connector while not mounted to the PCB may cause
breakage or deformation to the contact.
■ Extracting the connector by holding the cable could result in a breakage.
■ Do not apply flux at the time of hand soldering, as it may result in flux rise.
■ This product may have slightly different hue on molded items, however, they do
not affect the product performance.
■ See the separate“DF59 Insertion/Extraction Procedure Manual” for handling
precautions at the time of insertion and extraction.
[Applicable Conditions]1. Peak Temperature: MAX 250℃2. Heated Area: 220℃ or above, within 60 sec.3. Pre-heating Area: 150-180℃, 90-120 sec.4. Number of Operation: Twice or less* The contact lead area was measured.The conditions may change depending on the types and manufacturers of cream solder, PCB size, and conditions of other materials used for soldering. Please fully check the soldering condition before use. [Remarks 1] This temperature profile is our recommended value.
50
60sec MAX
100
150
200
250
0
TE
MP
ER
AT
UR
E(ç)
PRE-HEATING TIME SOLDERING TIME
TIME(sec)90~120sec
180ç
220ç
10sec MAX
MAX 250�
8
DF61 Series●Board-to-Wire Swing-Lock Connector for Low-Profile Power Source
7. Mating/Un-mating Mating Operation
Un-mating Operation
Header Lock
Friction Lock
Reinforced Lock
Click Feel
Lever
(1) Start by placing the connector against the header lock at an angle. If the plug is not started at an angle, it will cause damage to the connector.
(1) Begin by lifting up on the front section of the plug.
(3) Keep pressing down until a “click” feeling is sensed. The connector is now fully and properly mated.
(3) Once the rear, or reinforced lock, is released the plug will come free from the header and complete the un-mating sequence.
(2) Then, in a slight, rotating movement, push the front section of the plug down.
(2) Continue to rotate it upwards and release the friction lock portion.
The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use.The contents of this catalog are current as of date of 04/2013. Contents are subject to change without notice for the purpose of improvements.
Kontaktdon som laddar din produkt med en påtagligt ökad
konkurrenskraft. Det är vad du får av oss inom detta område.
Genom allt från längre livslängd till högre kostnadseffektivitet.
Och framförallt genom mer utrymme för de intelligenta och aktiva
komponenterna. Rätta donen för att öka din lönsamhet, helt
enkelt.
Programmet omfattar bl.a. kabel- och chassidon, kåpor, socklar,
kort-kort och kortkabeldon med delning från 0,3 mm till 5 mm
i både yt- och hålmonterade utföranden. Vi kan även erbjuda
komplett kabelkonfektionering med våra kontaktdon.