Suzuki GSX-R750 1998-1999 Remove the main seat. www.healtech-electronics.com S U P P L E M E N T A R Y M A N U A L for iQSE-1 + QSX-F4A PAGE 1/2 Lift up or remove the fuel tank. Connect QSH connectors in-line with the injectors and injector connectors.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Suzuki GSX-R7501998-1999
Remove the main seat.
www.healtech-electronics.com
S U P P L E M E N T A R Y M A N U A Lfor iQSE-1 + QSX-F4A
PAGE 1/2
Lift up or remove the fuel tank.
Connect QSH connectors in-line with the injectors and
injector connectors.
Suzuki GSX-R7501998-1999
www.healtech-electronics.com PAGE 2/2
Connect QSH black wire terminal to chassis ground.
Mount the QSE Sensor.(Replace the bolt with the one supplied.
Place the conical washers at the two sides ofthe sensor like this: (0). Tighten the bolt in
this position by about 5 Nm. If you do not havea torque wrench, tighten the bolt until the
shift arm is tight on the gearbox shaft.For different mounting options,
refer to the sensor install guide.)
Typical position for theQuickShifter easy.
Related Documents
