Sustainable Aboriginal Housing in Canada A Case Study Report Johann Kyser, Student Housing Intern For the HSC-CPNet@Western Housing Intern and Scholar Programme* December 2011
Sustainable Aboriginal Housing in Canada A Case Study Report
Johann Kyser, Student Housing Intern
For the HSC-CPNet@Western Housing Intern and Scholar Programme*
December 2011
*The Housing Internship and Scholar Programme is organized and run by CPNet’s Associate Executive Director Professor Michael Buzzelli. Foundational funding is provided by the Housing Services Corporation. The programme’s overall aim is to develop Canada’s housing research and policy capacity by attracting and retaining the best and the brightest in the housing sector. The programme is an intensive policy research training experience that results in the publication of original housing research. For more information on HSC research, go to www.hscorp.ca The views expressed in this paper are those of the author and do not necessarily reflect the opinions of the Housing Services Corporation or CPNet. CPNet CPNet is a not-for-profit, independent think-tank affiliated with the University of Western Ontario. www.cp-net.ca
Housing Services Corporation (HSC) Housing Services Corporation (HSC) is an independent, self-sustaining organization that delivers programs and services to Ontario’s social housing sector in energy management, investments, insurance, bulk purchasing, asset management, social innovation, training and research. With its research, policy and networks unit, its investments in research and its housing internship and scholar program, it is one of the biggest contributors to social housing research in Canada. http://www.hscorp.ca
Table of Contents
Abstract ................................................................................................................. 1
Executive Summary ............................................................................................. 2
Glossary ................................................................................................................ 3
Introduction .......................................................................................................... 6
Methodology and Research Design ................................................................... 9
Literature Review ............................................................................................... 11
Seabird Island First Nation: Case Study ......................................................... 21
Saugeen First Nation: Case Study .................................................................. 35
Treaty 7 First Nations: Case Study ................................................................. 44
Conclusions and Recommendations ............................................................... 64
Recommendations for Aboriginal Housing Design .......................................... 68
Recommendations for Aboriginal Housing Policy ........................................... 69
Acknowledgements ........................................................................................... 71
1
Abstract
This report presents strategic recommendations for sustainable Aboriginal
housing design and related policy in Canada. Research adopts a systems
thinking approach, drawing not only on current housing conditions and policies,
but also on broader technological, cultural and historical contexts as important
considerations for design at the project level. Of particular interest is the potential
of green building methods and clean technologies to address key issues
prevalent in contemporary Aboriginal communities. As emerging sectors, green
building and clean technologies present new challenges and opportunities.
Understanding how these may be further influenced by implementation in
Aboriginal contexts is central to the research objectives. Cultural design
considerations are also explored for their potential to address key issues and
improve current conditions, bridging gaps that have emerged between traditional
and contemporary housing knowledge and practices. Specific attention is
directed to appropriateness as a means of fostering identity, sense of ownership,
and responsibility for the home. Findings are based on a literature review,
exploratory case studies of pilot projects, and applied research in sustainable
Aboriginal housing. Data collected through key informant interviews, document
review and observation is subjected to stakeholder and SWOT (strengths,
weaknesses, opportunities, threats) analyses, providing the basis for assessment
and strategic recommendations.
--
Important notes: this report contributes to an area of study that is undergoing
continuous development. For example, conditions in the communities studied
and outcomes specific to their pilot projects may also have evolved since the
initial data was collected. CMHC also recently released material on sustainable
housing that could not be integrated into the original literature review.
Lastly, while all of the case studies herein were conducted with First Nations,
literature and observation indicate similar issues, challenges and opportunities
related to housing in other Aboriginal (Métis and Inuit) communities. The report’s
exploration of green building methods, clean technologies, and cultural design
considerations may therefore also prove relevant in these contexts. For
inclusiveness, the term ‘Aboriginal’ has been applied throughout the text.
2
Executive Summary
This report presents strategic recommendations for sustainable Aboriginal
housing design and related policy in Canada. Findings are based on three
exploratory case studies of sustainable housing pilot projects in Aboriginal
communities, selected for their use of emerging green building methods and
clean technologies. The cases confirm the potential of these strategies to
address key issues and problematic conditions in this context, including provision
of occupant health and safety, durability, and reduced operating, maintenance
and replacement. The cases also highlight challenges and opportunities to
implementing such strategies, including those specifically faced by Aboriginal
communities. Inadequate design, insufficient economic resources and capacity,
and barriers in law and policy are notable challenges. Unfamiliarity with emerging
methods and technologies is also problematic, and may lead to increased costs
and/or failure to realize benefits. Project success relies upon strong
communication between stakeholders, careful alignment of strategies with
community resources and capacity, and follow-up to determine efficacy and
establish best practices. Incremental implementation may help communities to
conserve resources and mitigate risk. Self-construction and education initiatives
provide important means to foster awareness, responsibility, and capacity. The
cases also offer important insight into cultural design considerations as a means
to increase appropriateness of Aboriginal housing design. This may help to
bridge gaps that have emerged between traditional and contemporary housing
knowledge and practices, with potential to foster sense of identity in, and
subsequent ownership and responsibility for the home.
3
Glossary
Aboriginal – is an umbrella term that includes First Nations, Métis, and Inuit peoples. There are over 600 distinct Aboriginal groups in Canada, for whom distinct cultural heritage is an integral part of their identity. These represent approximately 1.2 million people, or 3.8% of Canada’s total population (Census Canada 2006).
Aboriginal Affairs and Northern Development Canada (AANDC) – formerly Indian and Northern Affairs Canada (INAC), AANDC is the official federal body that governs relationships between Aboriginal groups and the government of Canada.
Adequacy – one of three indicators used by Canada Mortgage and Housing Corporation (CMHC) to measure core housing need (CHN), adequacy measures whether a residential unit is in need of significant repair, according to the tenant. INAC’s website (AINC-IANC.gc.ca) provides the formula: Adequate = Total Units - Replacement Required - Major Renovations Required.
Affordability – one of three indicators used by Canada Mortgage and Housing Corporation (CMHC) to measure core housing need (CHN), based on whether the rental or purchase of a given residential unit is less than 30% of an individual’s or household’s income.
Affordable housing – the definition of affordable housing follows that of CMHC identified above. Affordable housing is distinct from social housing, the former being a measure of cost, the latter being subsidized (Real Estate Foundation of British Columbia 2007).
Affordable Housing Initiative - under the Affordable Housing Initiative (AHI), the federal government, through Canada Mortgage and Housing Corporation, provides contributions to increase the supply of off- reserve affordable housing, in partnership with provinces and territories. See: http://www.cmhc-schl.gc.ca/en/inpr/afhoce/fias/fias_005.cfm
Appropriateness –this concept surfaced in the context of Aboriginal housing in literature, case study interviews and observation. Despite this frequency, the term remains ambiguous. This is due in part to the diversity of Aboriginal contexts, which result in equally diverse definitions. One of the objectives of this study is to explore principles that may guide the concept of appropriateness, and its potential to contribute to improved housing. This discussion is related to that surrounding ‘suitability’, as described below.
Canada Mortgage and Housing Corporation (CMHC) – Canada’s national housing agency.
Certificates of Possession (CPs) – are documents issued under the Indian Act and administered by Band Councils which permit individuals to occupy and use on-reserve land.
Clean technology(-ies) – methods for essential service provision (such as electricity, heat, potable water, and waste water treatment) that offer reduced environmental impact relative to conventional methods.
4
Core Housing Need (CHN) – employed by CMHC, core housing need is a model that accounts for housing conditions in Canada. A household is said to be in core housing need if it falls below one or more standards of adequacy, affordability, or suitability (CMHC 2002).
First Nations – Aboriginal peoples who are of non-mixed Aboriginal heritage (non-Métis), and not Inuit.
Feed-in-Tariff (FiT) – monetary compensation for excess energy that is generated by alternative sources and fed onto an existing energy grid.
Green building – describes methods which prioritize reduces environmental impact and/or occupant health and safety.
Indian and Northern Affairs Canada (INAC) – the former title for what is now Aboriginal Affairs and Northern Development Canada (AAND), INAC/AAND is the official federal body that governs relationships between Aboriginal groups and the government of Canada.
Indoor Air Quality (IAQ) – is used to describe the quality of indoor environments relative to human health, based on factors such as humidity, off-gassing and other particulates.
Life Cycle Assessment (LCA) – is a comprehensive tool that examines all stages of a project’s, in order to assess its environmental impact. LCA can be applied to a variety of projects, from consumer products to skyscrapers. In the context of the built environment, LCA includes examination of relationships between material production, transportation, implementation, and decommissioning, environmental impact, and human health.’
First Nations Market Housing Fund – a $300 million dollar fund established by the federal government in 2007, intended to support financing arrangements for housing developments on reserve and settlement lands.
Maximum Unit Price (MUP) – is a policy employed by CMHC which limits the amount of capital that can be spent per unit in a given geographic region.
Ministerial Loan Guarantee (MLG) – provided by AANDC, a ministerial loan guarantee allows individuals and communities to secure housing loans despite the fact that they cannot give a lender the rights to the property.
National Building Code – is the federal document which outlines requirements for design and construction of new buildings and renovations of existing buildings. Specific requirements pertain to safety, health, accessibility, and fire and structural protection.
Ontario First Nations Technical Services Corporation - a corporation responsible for providing technical advice and services to 134 First Nations in Ontario.
R2000 – a voluntary technical performance standard for residential construction, administered by Natural Resources Canada, delivered through service organizations across the country. The aim of R2000 is to promote the use of cost-effective energy-efficient building practices and technologies.
Section 95 – CMHC’s program for on-reserve non-profit housing provision.
5
Social housing – subsidized housing developments. Many on-reserve homes will fall under this category. Some communities have rent-to-own programs in place, which may or may not be subsidized. Social housing is distinct from affordable housing, the former denoting subsidization, the latter being a measure of cost (Real Estate Foundation of British Columbia 2007).
Suitability – one of three indicators used by CMHC to measure core housing need (CHN – see affordability, adequacy), suitability indicates whether a unit has a sufficient number of bedrooms relative to occupancy and gender, based on the National Occupancy Standard of Canada. This research is seeking a more comprehensive definition of suitability or appropriateness, and explores how cultural considerations may contribute to this end.
Sustainability – in this context, sustainability is applied to human activity. In March of 1987, the Brundtland Commission of the United Nations defined sustainable development as that which “meets the needs of the present without compromising the ability of future generations to meet their own needs (United Nations 1987).” Contemporary discussion surrounding sustainability also includes a triple-bottom-line approach (TBL) – that is, the inclusion of environmental, economic, and social spheres. Aboriginal concepts of sustainability experienced in this research center on a similar theme, including ‘seven generations’ as the temporal basis in which our current actions ought to be grounded.
Volatile Organic Compounds (VOCs) – are found in various human-made products, including finishes and paints used in interior decoration. These compromise indoor air quality (IAQ) with negative outcomes for occupant health.
6
Introduction
This report presents strategic recommendations for sustainable Aboriginal housing
design and related policy. Green building methods and clean technologies present
opportunity to address key issues in this context by prioritizing occupant health and
safety, reducing costs of operations and maintenance (O&M), and reducing
environmental impact. Simultaneously, as emerging sectors these methods and
technologies present new challenges. Understanding how challenges and
opportunities may be influenced by implementation in Aboriginal contexts is central
to the research objectives. Absence of cultural design considerations in
contemporary Aboriginal housing has also been identified as a potential cause of
housing failures, undermining sense of ownership and subsequent responsibility for
the home. Such considerations are thus explored for their potential to impact
current conditions, by increasing appropriateness and bridging gaps between
traditional and contemporary knowledge and practice.
Recommendations are derived from a literature review, applied research and
multiple exploratory case studies of pilot projects in sustainable Aboriginal housing.
Case studies were selected based on their implementation of green building
methods and clean technologies, in order to:
Confirm and compare key issues and direct causes in specific contexts;
Identify methods and technologies that were chosen to address these;
Determine whether these methods and technologies proved effective;
Identify what factors influenced success, including but not limited to those
that emerge as a result of Aboriginal contexts.
Data from the applied research and case studies is subjected to stakeholder and
SWOT (strengths, weaknesses, opportunities and threats) analyses, providing the
basis for strategic design and policy recommendations.
7
Rationale and Significance
Despite Canada’s status as a developed nation, many Aboriginal peoples in this
country experience significant socioeconomic disadvantage that has persisted for
decades. Sub-standard housing conditions are pervasive in Aboriginal communities
across the country, within and beyond reserve lands, in rural and urban settings.
The high social, environmental and economic costs of the status quo are
unsustainable. Mould, fire, and crowding are national epidemics, driving negative
outcomes in terms of individual and community health and well-being (INAC 2004,
CREA/IHC 2006); short building life spans lead to waste of valuable community
resources; and communities are unable to meet housing needs, despite significant
funding from the federal government. Where housing is recognized as a stabilizer
and facilitator for individual and community development (CMHC 2010), improved
frameworks for Aboriginal housing are thus of real value and significance.
Research in this area is also timely, as the federal government seeks to download
responsibility for Aboriginal and other social housing initiatives to the provinces.
While research supports a regional approach to determining issues and strategies,
historic absence and ambiguity of responsibility for Aboriginal housing may also be
perpetuated or worsened. Responsibility and accountability for Aboriginal housing
are urgently needed, in order to address the severe socioeconomic disadvantage
that continues to challenge individuals and communities.
Research Questions
How can emerging green building methods, clean technologies and cultural design
considerations contribute to more sustainable Aboriginal housing in Canada? What
challenges and opportunities accompany these methods and technologies, and
how might they be further affected in this context? What design strategies and
related policies can support positive change?
8
Objectives
Provide a systems-oriented account of the drivers influencing Aboriginal
housing, including historical background, policies and key issues;
Identify existing challenges and opportunities to implementing green
building and clean technologies;
Conduct case studies of pilot projects in sustainable Aboriginal housing, to
explore the influence of Aboriginal contexts on these methods and
technologies;
Contribute to the dialog on cultural appropriateness of Aboriginal housing
design; and
Provide strategic recommendations and identify areas for future research.
9
Methodology and Research Design
Aboriginal housing in Canada is an extremely complex phenomenon involving
multiple stakeholders, and relationships occurring across different scales in both
space and time. This report employs methods based in contemporary design
thinking, systems thinking, case study methodology and strategic analysis. The
intent is to account for this complexity – identifying the drivers that influence
Aboriginal housing, as well as potential means to react to these at the project level.
A comprehensive literature review identifies key issues, relationships, root and
direct causes; existing challenges to implementing green building methods and
clean technologies; and additional considerations that may emerge in Aboriginal
contexts. The review includes a variety of sources to account for different
perspectives. Findings are further triangulated through preliminary expert
interviews.
Pilot projects of sustainable Aboriginal housing are the subject of qualitative
exploratory case studies. The cases include multi-family developments in Seabird
Island and Saugeen First Nations. Data for the cases is gathered through
observation, review of project related documentation, multiple key informant
interviews. Key informants were selected for their professional experience related
to Aboriginal housing, including but not limited to the firsthand knowledge of the
cases themselves. Interviews are used to confirm findings from the literature
review; determine capacity within the case communities; identify current conditions
and subsequent issues; explore how the pilot projects sought to address these;
and determine whether specific approaches were successful relative to project
objectives. Variables examined include sources of funding, project costs, building
methods and technologies deployed, and project outcomes. Document review and
observations are used to triangulate data from the interviews.
A third case is also considered, based on applied research in the design-build of a
1000ft2 single-family solar-powered home, developed in collaboration with Treaty 7
First Nations. Data from this case was collected through interviews, and direct
participation in the project through one year of project management and one year
of Aboriginal relations management.
10
Data from the case studies and applied research is subjected to stakeholder and
SWOT analyses (strengths, weaknesses, opportunities and threats), elucidating
the challenges and opportunities experienced when implementing green building
methods and clean technologies in Aboriginal contexts. The literature review,
preliminary interviews, and analyses of cases and applied research are combined
to derive strategic recommendations for sustainable Aboriginal housing design and
related policy.
This methodology has its limitations. For example, it does not provide a
comprehensive audit of the cases, wherein all costs and outcomes are analyzed.
Such an audit falls beyond the scope of research, particularly where formal post-
occupancy review is outstanding in all of the cases. Here, Aboriginal methodology
literature suggests that such review may be best conducted from within the
community due to sensitivities surrounding research activity, as well as potential
obstacles that might emerge through differing interpretations of language and
meaning.1 It is also important to note that performance outcomes often represent
moving targets – costs and standards are continually changing, and so must be
evaluated by the most recent data available. With these limitations in mind, the
research does offer value through a qualitative approach to the problem, identifying
issues, causes, challenges, opportunities, and important strategic considerations.
1 Smith,1999. Simultaneously, conducting this type of assessment from within a community presents its own
challenges, where trust and communication between various groups may be undermined by corruption or other abuses of power.
11
Literature Review
The literature review draws on journal articles, media articles, census data, reports,
studies and texts (both fiction and non-) to explore existing knowledge surrounding
the research question. This review is structured according to overlapping thematic
areas:
1. The histories and cultures of Aboriginal peoples in and before Canada;
2. Contemporary Aboriginal housing – frameworks, models, key issues and
conditions
3. Challenges and opportunities to green building and clean technologies;
and
4. Aboriginal cultural considerations that have emerged in recent discourse
and practice.
Due to limitations on the length of this report, the entirety of literature considered
could not be covered in this review. The review is thus intended to provide only a
preliminary foundation for the concepts being examined. While the works cited are
central to the current state of research, additional materials listed in the
bibliography are also valuable to a more comprehensive account. It is also
important to note that throughout the literature reviewed, no single report
synthesized the broad systemic drivers influencing Aboriginal housing with project
level strategies for achieving more sustainable design and policy outcomes. For
this reason, this paper offers novel and important insight for achieving positive
change.
1. The Histories and Cultures of Aboriginal Peoples in and Before Canada
The troubled history of Aboriginal peoples in Canada is a root cause of
contemporary housing problems. Colonial policies and legislation have contributed
to the destruction of Aboriginal economies and social structures; the appropriation
of land and resources; external control of individual legal and financial status; the
imposition of foreign organizational structures that foster conflict within and
between Bands; the repression of cultural practices such as language and
ceremony; the forced removal of children from their homes and communities; and
dependency on the federal government for housing, infrastructure and social
12
assistance funding.2 This legacy continues to shape contemporary dialog and
practice; sensitivity and mistrust permeate relationships between Aboriginal and
non-Aboriginal peoples, in turn impacting the many housing outcomes that rely on
these relationships (Royal Commission, 1996).
Disrupted cultural traditions specific to housing include transfer of knowledge,
ownership and responsibility. Further, new foreign systems that were imposed –
socioeconomic, political and technological – were not properly translated or
interpreted. This has driven a knowledge gap in Aboriginal communities in terms of
both building science and housing market function.3 Many of these communities
now demonstrate reduced capacity and resources, and experience a sense of
marginalization, dispossession, and disempowerment4 (INAC 2004, Royal
Commission 1996, CREA/IHC 2006).
Occupying special status in this discussion, “the Indian Act is the primary
prohibitive factor in the development of… successful housing programs on Indian
lands (CREA/IHC 2006). The Act presents complex barriers to private ownership
on reserve lands, undermining market function and financing. As the original
territorial agreements between the Federal Government and First Nations,
numerous Treaties also influence housing and associated infrastructure through
limited land base, location, quality, and access to local resources.
“The most intense conflicts between Aboriginal and non-Aboriginal people center
on the use and control of land… [as] the essential substructure of political,
economic and social development (Royal Commission, 1996).”
Varied interpretation of laws and policies lead to conflict surrounding responsibility
for housing, which indirectly contributes degradation of housing assets.
Although some of the problems that follow from the Indian Act and Treaties are
specific to reserve lands, their impact has reached well beyond these physical
boundaries, affecting Aboriginal people living within and beyond reserve lands in
both rural and urban settings. Identity, self-determination, equity, and sense of
home, community and belonging remain critical challenges, and thus deserve
consideration in any housing initiative intended for Aboriginal peoples (Royal
Commission, 1996). Beyond these considerations, Aboriginal housing outside of
2 Royal Commission, 1996. Specific policy-based and legislative documents contributing to this legacy include the
British North American Act, the Royal Proclamation, the Constitution Act and the Indian Act.
3 Based on oral teachings of Dr. Reg Crowshoe, former Chief of the Piikani Nation.
4 It is critical to acknowledge that the diversity of Aboriginal groups in Canada translates into a diversity of experience
of these phenomena. In practice, despite common themes, each community must be recognized as a unique entity and treated accordingly.
13
reserve lands also faces the many challenges associated with conventional social
housing initiatives.
2. Contemporary Aboriginal housing – Frameworks, Models, Key Issues and Conditions
The Royal Commission on Aboriginal Peoples aptly summarizes the contemporary
housing crisis, stating that “conditions pose an unacceptable threat to the health of
Aboriginal peoples and reinforce feelings of marginalization and hopelessness
(Royal Commission, 1996).” Specific conditions relevant to this research include
but are not limited to housing shortages, overcrowding, substandard building
quality and building disrepair, high rates of mould and fire, challenges to
affordability, and inadequate access to essential services. Estimates vary, with the
need for tens of thousands of significant renovations and new unit construction at a
National level.5
Problematic conditions are highly interrelated in their existence and outcomes as
illustrated in Figure 2 on page 20. The status quo is unsustainable from social,
economic and environmental perspectives:
Individual and community health, safety and well-being are below
acceptable standards;
Energy inefficiency and wasted materials drive negative environmental
impacts; and
The economic cost of operating, maintaining and replacing homes results
in unmanageable debt and unmet need.
5 These conditions and their relationship to negative socioeconomic outcomes are further documented in numerous
government reports, and journal and media articles. See Beavon 2009, CMHC 2002/2010, CREA/IHC 2006, Health Canada 2005, INAC 2004, Robson 2008, and the Auditor General’s Report 2011.
14
Desired performance improvements for contemporary Aboriginal housing thus
include but are not limited to promoting health and safety, structural durability,
functional flexibility, and affordability. Beyond these outcomes, strategies for
enhancing capacity are also highly desirable, as a means to garner support, foster
a sense of ownership, and move communities towards independence and self-
determination. These potential improvements are used to guide the exploratory
case studies.
Here, it is important to note that beyond historic root causes, current conditions are
a direct result of contemporary housing policy and subsequent design options (or
lack thereof). From its introduction around the mid-20th century well into the mid-
1990s, housing on reserve lands was centrally controlled by INAC and CMHC. A
minimal range of options were available to meet the significant variety of needs and
interests that follow from Aboriginal diversity, including cultural, geographic, and
socioeconomic factors. Numerous housing failures can be linked to this limited
approach, including rapid degradation and related health issues. While the 1996
on-reserve housing policy was created to deliver more control to First Nations, it
was not applied consistently, and has been identified as largely unsuccessful. Key
challenges remain in terms of responsibility, accountability, transparency,
complexity of process, and centralized decision-making by government bodies
(Status Reports of the Auditor General 2003/2011). Current evaluative frameworks
such as CMHC’s Core Housing Need (CHN) also contribute to policy shortcomings,
wherein:
Affordability data is not available for housing on reserve lands;
It is weak in rural and remote contexts, where incomes are generally lower
and market functions differ significantly (CMHC 2003);
It implicitly assumes that with sufficient income, a household can resolve
housing difficulties (CMHC 2003);
Adequacy (need for significant repairs of a housing unit) is determined by
the tenant, who may not be qualified to conduct such an assessment; and
Suitability is narrowly defined as the number of bedrooms in a unit based
on Canada’s National Occupancy Standards.
15
In addition to the CHN framework, CHMC’s “Maximum Unit Price” model (MUP)
prescribes an initial capital cost based on the number of bedrooms in a unit. This
indirectly limits initial design options and subsequently influences quality. The
model also results in biases towards cost considerations over actual community
needs. While there are allowances within the MUP for increased expenditure in
order to achieve specific performance outcomes, the full range and availability of
features that qualify cannot be readily identified (CMHC 1994, Shaw et. al. 2007).
Additionally, research has uncovered ‘modesty requirements’ – certain features
that cannot be included in housing developments on reserve lands regardless of
cost. While the rationale for these requirements is unknown, one suggested these
might create the appearance of equitable treatment across different Aboriginal
communities, and also to avoid perception of high costs relative to Aboriginal
housing portfolios. Specific modesty requirements identified from the 1980s include
basic features such as fireplaces, microwaves, and garages. Initial correspondence
with CMHC suggests that these requirements still exist in some form today, though
their correlation with the features identified has not yet been confirmed.
Funding approvals for renovations, new unit construction, and land improvement
currently remain in the domain of CMHC and INAC, controlled through vehicles
such as Ministerial Loan Guarantees (MLGs), Section 95 allocations, and
Certificates of Possession (CPs). Literature and preliminary interviews indicate
resulting complexity, ambiguity of process, and unmanageable debt loads. These
vehicles are explored in the context of the case studies, in order to further account
for their impact on Aboriginal housing.
16
3. Green Building and Clean Technologies: Challenges and Opportunities
As emerging sectors, green building and clean technologies present both new
challenges and new opportunities. Literature points to unfamiliarity as one of the
foremost challenges, with the potential to negatively influence project outcomes
through:
Ambiguity of effectiveness in cost and performance;6
Inflated estimates for services or products;
Improper installation, maintenance or replacement;7 and/or
Increased complexity in funding and certification.
(Proscio 2008, Real Estate Foundation of British Columbia 2007)
Unfamiliarity may present additional challenges in Aboriginal contexts, where
capacity in conventional methods and technologies is already insufficient to
address substandard conditions. Simultaneously, there is an opportunity for
Aboriginal communities to ‘leapfrog’ over the inefficient, unhealthy, and costly
methods that have occupied homebuilding of their non-Aboriginal counterparts in
recent times.
Integrated design processes and specially designed programs are identified as
means to overcome unfamiliarity. These can be used to establish and
communicate project objectives and responsibilities; educate key stakeholders
such as occupants and building managers on unique maintenance and
replacement needs; and develop capacity-building measures. Such processes and
programs may also help to overcome external stakeholders’ unfamiliarity with
aspects of history, culture and lifestyle relevant to contemporary Aboriginal housing
design. Literature also highlights the importance of comprehensive visioning and
committed industry partners to achieving long-term success.
Emerging studies in life cycle assessment point to building material selection as an
important part of improving environmental sustainability, including not only direct
6 For example, environmental impact of new materials and technologies may not be evident until they have been in the
market for some time. They may also exert substantial influence on a project’s environmental impact and economic feasibility, through recycling and/or retrofitting potential.(Thormark 2002/2006, Blengini 2009) These benefits are particularly important in remote areas where supply chains represent a challenge to availability and cost of materials and their transportation and/or storage. Such complex interrelationships highlight the importance of life cycle assessment (LCA) and cradle-to-cradle housing design.
7 For example, IAQ benefits will be lost if low-VOC finishes are replaced with conventional ones.
17
and indirect environmental impacts through all phases, but determining options for
re-use, recycling, repurposing and retrofitting (Thormark 2002/2006, Blengini
2009). Demand-side energy conservation and efficiency are also widely
acknowledged as ‘low hanging fruit’ for realizing O&M savings and reducing
environmental impact in residential design.
The potential value of alternative energy projects should also not be discounted.
While these may require higher capital investment than efficiency and conservation
measures, they also demonstrate potential for O&M savings and reduced
environmental impact. Further, with appropriate policy and funding support, such
projects may provide Aboriginal communities with a valuable means to autonomy
of service provision; independence from fossil fuels, and associated logistics and
price volatility; and even revenue generation to support future initiatives (INAC
2010). Revolving loans and community level feed-in-tariffs (micro-FiTs) are among
the innovations that have been used to alleviate costs, facilitate realization of long-
term benefits, and incentivize valuable partnerships with financial institutions and
service providers (CREA/IHC 2006, INAC 2010, Ontario Green Energy Act).
4. Aboriginal Cultural Considerations in Recent Discourse and Practice
The diversity of Aboriginal peoples in Canada includes significant variation of
historic, cultural and geographic contexts. The goal of this section therefore, is not
to establish a universal set or model, but rather to explore examples found in
contemporary discourse. Parallels observed in different contexts do suggest
however, that these examples may be used as initial points of departure for future
research and design (Dobie and Seniuc 2003, INAC 2010, Memmott 2008, Shaw
et. al. 2007, Dalla Costa, n.d.).
The exploration of cultural design considerations responds in part to a gap in the
literature: cultural ‘appropriateness’ appears in different contexts, including
discussion on the form and function of actual housing units. In common language,
the term may be interchanged with similar ones such as ‘suitability’. This can be
problematic given the latter’s specific role as an indicator within the CHN
framework. Beyond this use however, neither term is well-defined relative to
Aboriginal housing. The review thus explores cultural design considerations as a
foundation for expanding on the concept of appropriateness through the case
studies. The objective is threefold:
18
1. To further develop a sense of how cultural appropriateness might be
defined;
2. To explore whether related considerations were included in the case
studies; and
3. To explore whether and how their inclusion or absence might affect
outcomes of form and function.
Worldview is often considered central to the identities and cultures of Aboriginal
peoples, and is frequently characterized by collaborative relationships with the
natural order. This is indicative in part of pre-contact lifestyles, wherein
relationships with local resources and other people were integral to Aboriginal
existence.8 Collaboration was thus frequently embedded in the value systems of
these peoples as a sort of survival mechanism. The degree to which such values
remain intact today varies from one community to the next, as a result of varied
experiences of historic and contemporary forces (King 2003, Highway 1998).
Therefore, interest in or desire to include worldview in residential design will also
vary significantly.
Aboriginal worldview may be expressed through residential design, for example in
the use of traditional building forms and principles; local, natural and/or reused
(recycled/repurposed) materials; orientation of buildings relative to natural features;
type and arrangement of functional spaces; connection to the exterior through
features such as windows, skylights, doors, and intermediate spaces; and/or use of
local and/or renewable sources for essential service provision.
Beyond fostering a sense of identity and cultural connection, such features may
offer additional benefits. For example, use of local materials may also incur lower
transportation costs and reduce associated emissions. Alternately, desired
outcomes may be at odds with each other. For example, although connection to
the land may be fostered by expansive windows, these also represent challenges
to energy efficiency and consequent operating costs. The potential for opposing
objectives highlights the importance of clearly communicating these, and
establishing appropriate strategies in the design process.
8 The UNESCO World Heritage Center at Head-Smashed-In Buffalo Jump provides a comprehensive account of plains
peoples’ harmonious relationship with the buffalo, which was an essential source of food, shelter and tools for thousands of years.
19
Aboriginal lifestyles may also contribute to unique functional needs and interests.
Examples from the literature include alternative options for food preparation and
storage, as well as gathering space for family and community. Flexibility of spatial
function is also identified as a way to respond to crowding, changing family needs,
and/or high rates of turnover and transition (Shaw et. al. 2007). Traditional forms
such as the Tipi and Long House may also act as a an expression of identity,
values and practices, while also contributing to function that is grounded in
Aboriginal identities and practices (Dalla Costa n.d.)
To design Aboriginal housing without acknowledging the aforementioned
contextual factors runs the risk of producing ‘band-aid’ solutions – that is, projects
or programs that do not adequately respond to root and direct causes.9 Positive
change therefore relies upon on a holistic and sustainable approach. The
overlapping areas reviewed here mark critical considerations for improving
contemporary Aboriginal housing, and will be explored further through the case
studies. Figure 1 represents the conceptual framework that emerged from the
literature review and subsequent research.
Figure 1: Aboriginal Housing – Relationships Across Scales
9 Further risk emerges as a result of uninformed perspectives, through the potential perpetuation of ignorance,
stereotypes, racism, and externally imposed solutions that have historically undermined positive change. King 2003 Chapters 2 and 5 highlight the importance of combating these historically significant social forces.
20
Figure 2: Aboriginal Housing – Interrelated Conditions, Causes and Feedbacks
Figure 3: Map of Case Studies
1 Seabird Island First Nation 2 Saugeen First Nation 3 Treaty 7 First Nations
21
Seabird Island First Nation: Case Study
Background, Capacity, Conditions and Funding
Seabird Island First Nation is an independent community within the Sto:lo Nation,
located southeast of Agassiz on the lower mainland of British Columbia (see Figure
3 on page 24).10
At the time this research was conducted, informants indicated
there were approximately 210 homes in the community, with a shortage of roughly
50 units. The Nation was constructing 12 new units, and renovating 27, which
represents approximately double their annual average, made possible in part by
CEAP funding described below. A comprehensive physical plan was also being
undertaken by the Band management, including demographics, GIS studies, and
housing strategy development.
Problematic housing conditions in the Seabird Island First Nation community
include substandard buildings, mould, crowding and high rates of occupant
transition. Informants identified inadequate specifications and funding as key
drivers of substandard buildings. They perceive the primary cause of mould to be
leakage, as a result of occupants leaving hoses connected throughout the winter.
This leads to excess moisture in the home that often goes unreported and
unresolved. Crowding is identified as a result of housing shortages, which stem
from insufficient resources and backlog. Additional occupancy pressure is created
by members returning to the community without access to their own units, resulting
in as many as 7 people residing in a 2-bedroom unit. The previously unidentified
phenomenon of under-crowding was also identified in this case, as challenge to
optimal use of housing assets. Multiple informants confirmed that beyond these
direct causes, contemporary housing problems have evolved in part from contact
and colonization; imposition of foreign social, governance and ownership
structures, and restrictions on access to and use of land and resources were cited
as underlying problems.
Capacity for housing within Seabird Island First Nation includes community college
programs in plumbing, carpentry, painting and wallboard installation. The housing
department is certified to conduct home inspections, and has recently completed
inspecting all homes in the community – seen as a critical step to identifying
10
The existence of Seabird Island as an independent Nation within the greater Sto:lo is indicative of contemporary sociopolitical complexity surrounding Aboriginal peoples – in this case demonstrating a First Nation within another First Nation, within Canada. Such complexity presents significant challenges to improving Aboriginal housing, where histories and sociopolitical structures are not always well documented or understood and related issues of authority, responsibility and accountability are unclear.
22
problems and needs. Insufficient funding, high rates of managerial turnover,
understaffed administration, and lack of specialized trades and professions were
cited as current capacity challenges. High turnover is attributed in part to lack of
awareness of and/or unpreparedness for housing management responsibilities and
scope of work. Understaffing is attributed to lack of resources, with subsequent
multi-tasking undermining individual and community ability to sufficiently address
housing and broader issues.
The Nation’s housing department has developed and is enhancing a ‘Housing 101’
program. The objective is to educate occupants on key maintenance issues, with
preventative action towards mould as the primary focus. The long-term goal is to
gradually shift maintenance responsibility away from the housing department,
except in areas of health, safety and plumbing. Various methods used include open
houses, discussions at community meetings, monthly newsletters and flyers, in-
home education and lists of tenant responsibilities. Although no formal assessment
of results has been undertaken, informants felt the program had successfully
contributed to reduced maintenance needs. Looking forward, they hope it will
expand to include occupant perceptions of and behavior towards home systems
and appliances.
Funding for Seabird Island First Nation’s housing typically comes from INAC,
administered through CMHC’s section 95. Interviewees indicated that the MUP for
the region is approximately $80,000-$100,000 for a single bedroom unit. They also
indicated that these funds are intended to cover not only construction costs but
also servicing and site development. The amount is viewed as insufficient to meet
individual project needs as well as overall demand. Further, accompanying
specifications result in substandard buildings that don’t last. If these are not
adhered to however, no funding is granted. High interest rates and resulting debt
are perceived as further undermining the effectiveness of Section 95 subsidies.
Funding cycles were also identified as problematic, where resources are often
granted in the rainy season, creating logistical challenges for implementation.
Overall, resources are spread thinly across administration and financing, forcing
the maintenance department to scale back programs. Only the most critical
problems are addressed, with neglect of regular maintenance needs fueling
widespread deterioration.
23
First Nations specific resources allocated within Canada’s Economic Action Plan
(CEAP) were identified as a valuable opportunity. These were recently used in
several mould remediation projects and other renovations, as well as over 19
furnace and hot water tank replacements, with long-term benefits in the range of 25
years. Seabird Island First Nation has a rent program in place intended to cover
maintenance, but informants indicated it is not sufficient to this end, and rental
arrears remain a challenge. They have also recently signed onto the First Nations
Market Housing Fund, and hope this will contribute to improvements in housing
and related capacity.
Seabird Island First Nation: Sustainable Housing Pilot Project – Description
In 2002, CMHC and INAC approached the Seabird Island Chief and Council, to
gain access to the community, and determine their interest in participating in a
sustainable housing pilot project. Resources would include contributions from
INAC/CMHC Section 95, CEAP, Band resources, and the private sector. The initial
concept was to build a single unit that would integrate multiple green building
methods and clean technologies, providing a reference point for future housing
initiatives.
An integrated planning process followed the approval to move forward. Community
representation was wide and intergenerational, and complemented by numerous
participants from public and private sectors. A shift to a multi-unit design was
accepted, in order to demonstrate consequent reductions in land requirements and
related costs of site development and servicing. Increased objectives for
environmental performance were driven by the community, as was an increase of
per-unit square footage beyond MUP specifications. A self-construction model
emerged as a strategy for capacity building. The objectives of the self-construction
model were to:
Learn to implement new methods and technologies;
Foster community pride, ownership, and trust between stakeholders;
Keep resources within the community, and use them more efficiently.
The Seabird Island First Nation pilot project was opened in 2004 with a ceremonial
blessing involving community spiritual and political leaders. The development is
comprised of four multi-storey buildings, totaling seven units in a combination of
duplex and triplex configurations, which are oriented in a south facing semi-circle.
The multi-storey approach diverged from the original concept of a traditional long
24
house (a low-lying structure) in order to facilitate technologies and flexibility
measures outlined below. Duplex and triplex configurations were selected to foster
long-term occupancy, given the development’s anticipated lifespan of 75-100
years. A circular medicinal garden was installed at the centre of the development.
Four Totem poles were positioned at the cardinal directions surrounding the
garden, with animals on each pole representing important community values and
teachings.
The project also uses CMHC’s flexhousing™ concepts11
, allowing adaptation
according to changing needs, thereby fostering optimal and long-term occupancy.
Specifically, the multi-storey units have been designed to accommodate retrofitting
– for changes in spatial function, additional mechanical systems, and separate
entrances.12
Slab-on-grade construction allows barrier-free accessibility of ground-
level areas. Independent units on different floors may thus be created, for example,
to facilitate multi-generational occupancy, with the grandparents living on the
ground floor while parents and grandchildren occupy a separate unit above. The
effectiveness of these measures remains untested to date – the community had not
undertaken major changes to the units in the first 7 years of occupancy.
Some of the project’s objectives and strategies demonstrate overlap between
social, economic and environmental outcomes. For example, reclaimed materials
were purchased at lower cost while also reducing impacts associated with
manufacturing or processing. Alternative energy features that were designed to
alleviate operating costs and emissions also resonated with traditional values.
Relationships between goals, objectives and strategies are summarized in Table 1.
11
See http://www.cmhc-schl.gc.ca/en/co/buho/flho/index.cfm
12 The aforementioned identification of under-crowding in this case provides additional justification for inclusion of
flexibility measures.
25
Figure 4: Seabird Island First Nation – Sustainable Housing Pilot Project
a) Site Plan
Images courtesy of Rob Seniuc and Broadway Architects
b) Townhouse Units
Images courtesy of Rob Seniuc and Broadway Architects
26
c) Circular Garden
Images courtesy of Rob Seniuc and Broadway Architects
d) Single Family Unit
Images courtesy of Rob Seniuc and Broadway Architects
27
Table 1: Summary of Goals, Objectives and Strategies
Goal Objective Strategy
Ensure occupant health & safety
Reduce mould, provide IAQ, durability
Formaldehyde-free low-VOC insulation and finishing, paperless drywall
Durable materials, high performance envelope: polished concrete radiant floor, metal roof, vinyl window frames, rain screen
Minimize environmental impact
Use alternative sources of energy
Increase energy/water efficiency
Use repurposed materials
Approximately 4kW of wind power, solar air roof, geo-exchange
South-facing orientation for solar exposure: passive heating, pre-heating water
Double insulation, efficient mechanical systems, lighting, plumbing fixtures, appliances, radiant floor, windows
Site graded for storm water absorption, use of drought-tolerant plant materials
Reclaimed yellow cedar telephone poles used for interior and exterior poles and beams, ‘plastic wood’ made from recycled bottles used in interior finishing
Reduced O&M and replacement costs
Longer maintenance cycle
Reduce dependence on hydro through alternative energy sources, energy/water efficiency
See durability and efficiency measures above
Alternative energy: approximately 4kW wind power, geo-exchange, solar thermal/air
Respond to cultural considerations,
demographics
Build capacity, sense of ownership, pride, trust
Reflect local values, needs, interests
Provide flexibility, adaptability to meet changing occupant needs
Multi-generational community input in design
Used local labour in construction
See alternative energy – reflects local values
Opening ceremony
Medicinal herb garden, carvings acknowledge community values
Guided by CMHC’s flex housing concepts, multi-purpose adaptable floor plan
Barrier-free slab-on-grade ground level units
Potential for retrofit of separate multi-storey access and additional mechanical systems
28
Seabird Island First Nation: Sustainable Housing Pilot Project – Analysis
Seabird Island First Nation’s sustainable housing pilot project provides a wealth of
data to consider. The project’s objectives were comprehensive, targeting social,
economic, and environmental outcomes. Several opportunities were capitalized on,
resulting in an attractive development that addressed certain community values
and needs, and provided many lessons learned. Simultaneously, challenges
experienced on this project confirm and add to findings from the literature review.
Some of these undermined the success of the initiative, including but not limited to:
Gaps in communication surrounding objectives and outcomes;
Lack of comprehensive auditing, resulting in ambiguity of total cost and
effectiveness;
Lack of follow-up from key external stakeholders, compromising capacity
building; and
Unforeseen increases in cost due to unfamiliarity and/or complexity.
From the outset, project objectives included integrating a suite of technologies,
some of which were unproven in terms of effectiveness and cost. Multiple
informants from both within and beyond the community suggested that complexity
of this approach was driven by external stakeholders and that, with all due respect
to them, it would have been beneficial to undertake a simplification exercise early
in the design process.
It is also unclear whether various options and their perceived benefits and risks
were clearly understood, and whether these were in turn made explicit to the
community. One informant external to the community estimated significant savings
from the multi-unit approach, including reduced infrastructure costs of $250,000
and reduced land costs of $300,000 - $400,000. Interview data suggests a
communication gap in this area: these benefits were not identified by key
informants within the community, and prevailing sentiment is that a smaller and
less ambitious project might have been a better way to start.
In-kind contributions from private sector partners were viewed as invaluable to the
project, including donations of materials, system components, and services.
Simultaneously these contributions undermined an accurate sense of actual project
costs. Informants estimate these were much higher than anticipated – $150 per
square foot or more, which is at least double the initial target. Further, they believe
29
this is the reason for a relative lack of follow-up from CMHC and INAC – that the
demonstration was simply too expensive to repeat. One external informant
suggests that the initial target is simply not realistic for providing adequate housing,
especially when this is expected to cover site and servicing costs.
Some partnerships with external stakeholders also resulted in dependency upon
their expertise for maintenance, monitoring, repeat installation, and/or realization of
benefits associated with specific technologies. Several of these relationships failed,
directly undermining community capacity in these areas. The project’s wind
turbines are a prime example of this dependence. This installation was the subject
of the first small-scale feed-in-tariff (micro-FiT) in the province of British Columbia,
and so required the support of high level champions in provincial politics and
service provision. Informants estimated that the cost of the requisite grid
connection exceeded conventional hydro hook-ups by up to 1000%. Of the multiple
turbines installed, one featured a new horizontal orientation that had not been
locally tested. Unable to survive heavy local wind loads, the device was blown
apart, and never reassembled or replaced, as the manufacturer went out of
business. Anticipated benefits from the other turbines – including reduced
operating costs and revenue generation – were also not realized. Accounts of the
reasons for this vary.
Outcomes of the geo-exchange earth tube system were the subject of additional
problems and communication gaps. Despite high costs and lengthy excavation
requirements, informants still identified this as possibly the most successful and
promising technology. Simultaneously, research conducted by an external
stakeholder points to multiple failures. Firstly contamination from soil during
installation had the potential to lead to mould, and it appears that this fact was
never relayed to the community. Secondly, energy requirements for circulating heat
exceeded the value of the heat being captured by this and other systems. Although
this was expressed in a post-occupancy assessment, the community indicated that
they were unable to interpret this report. Further confounding the matter, water
tanks that were installed as part of the system were far more costly than
conventional units, and had to be replaced inside of their projected lifespan. The
designer of this system also went out of business, again undermining community
capacity relative to this system.
30
Interviews suggest that community dissatisfaction with project outcomes is
exacerbated by these capacity-building failures. While project implementation did
successfully integrate local carpentry and other labour, the requirements for
maintaining, monitoring, and analyzing advanced technological systems exceeded
community resources and skill sets; requisite knowledge transfer and training had
not been realized in the first 7 years of occupancy. Data suggests that informants
may associate these failures not only with technological complexity and/or lack of
knowledge transfer, but also with the scope of the multi-unit approach. Such
association could negatively impact receptivity towards a multi-unit strategy in
future housing developments, thereby influencing other areas such as land base
and infrastructure. Indeed, receptivity of the multi-unit approach is further
influenced by a common preference for single family-units within Aboriginal
communities.13
Interview data suggests that perceptions of densification in the
Seabird Island community may be polarized, with awareness centered on extremes
of single units and high rises.
It is difficult to determine whether complexity would have been sufficiently reduced,
and capacity building improved in this case, had the project adhered to the original
single-unit strategy. It should be noted however, that a multi-unit approach does
not preclude simplicity, capacity building, or affordability – as demonstrated in the
second case study. The project faced further challenges where methods and
features resulted in excessive labour and related costs. The cedar shingle rain-wall
entailed extensive cutting and mounting relative to simpler methods.14
Sealing of
multiple round windows, unconventional corners and angles, and double layer
insulation were also cited. Compact fluorescent lights were seen as prohibitively
expensive, and their non-standard compatibility a source of inconvenience.
Paperless drywall, a strategy used to prevent mould and promote durability, was
applied throughout the project. Here, contractors’ unfamiliarity with the product
resulted in hourly rather than contractual rates. The extended drying time of the
product (4-5 times that of conventional drywall) further drove up costs, and also
created a bottleneck – preventing progress and in turn driving up costs in other
areas. Informants suggested that while this and other durability measures have
been successful, strategic placement of the paperless drywall in high-risk areas
such as the bathroom and kitchen would have been preferable. Other health-
promoting measures employed in the project include non-toxic and low-VOC paints
13
This preference was identified by key informants in all cases.
14 Local code has since been modified to include rain walls to address the wet climate.
31
and finishes, and durable polished concrete floors. The housing department no
longer installs carpet in any of their homes, and sees this as a strong strategy for
promoting IAQ.
The installation of the project’s medicinal herb garden came at significant cost. The
soil was never seeded, however, and the entire garden was eventually removed.
Informants indicated that lack of community interest may have resulted from the hot
summer climate, as well as the presence of hardy local weeds and insects. The
project’s south-facing orientation and use of alternative energy sources were
identified as important links to traditional worldviews and practices, according to
which all resources should come from the sun and the earth. In exploring other
cultural design considerations, informants cited previous installations of sheds for
smoking fish. These were removed, however, where resulting particulates were
found to exacerbate asthma and respiratory illness in the community. This is
significant, demonstrating that the absence of a particular cultural response does
not mean it has not been considered or tried, as one might otherwise assume.
Diversifying options for food preparation such as smoking and canning remain an
area of interest, as a potential way to revitalize traditional practices that are still
contribute to lifestyles in the community. Options for exterior cleaning and storage
of outdoor activity gear, and larger driveways for multiple vehicles were also
identified as desirable features. A formal needs assessment or community
consultation to explore such interests has not been conducted to date. Analysis of
this case is summarized in Table 2.
Table 2: Seabird Island First Nation – Strengths and Weaknesses
Strengths Weaknesses
Political, institutional, regulatory
Comprehensive physical plan
Absence of Treaty provides greater freedom and flexibility in land use and related negotiation
Pilot partnered with external stakeholders – introduced new methods and technologies to the community, in-kind donations of materials, systems, services
Pilot established micro-FiT support for wind power, potential savings, revenue generation
Pilot capitalized on increasing diversity of Aboriginal specific funding (CEAP)
Vestiges of colonialism include mistrust within and beyond community, enduring socioeconomic disadvantage that affects community resources for funding housing initiatives
Complexity surrounding Nation within a Nation within a Nation
Territorial boundaries and local activity surrounding community limit quality and access to land and resources
MUP restricts housing options
Current specifications tied to funding are substandard
Lack of follow-up from, and bankruptcy of external stakeholders,
32
Strengths Weaknesses
undermined transfer of knowledge and capacity-building related to emerging methods and technologies
External stakeholders increased complexity (see pilot below)
Failure to realize benefits of FiT (see pilot below)
Socio-cultural including community resources, skills, education, capacity
Capacity to locally conduct inspections
‘Housing 101’ occupant education, multiple methods
Local community college with certified trades programs
Community outreach intent behind comprehensive physical plan
Youth familiarity with technology allows access to information including housing innovations (methods, technologies, programs)
Traditional role of Elders in knowledge transfer
Use of local labour in pilot construction
Housing management understaffed, high turnover
Crowding, backlog, high rates of transition
Tenant sense of entitlement, lack of responsibility
Rental arrears undermine local government’s ability to deliver housing and community services
Lack of housing diversity sub-optimal use (incl. under-crowding)
Misperceptions, knowledge gaps surround function, maintenance, energy demand of home appliances, systems
Emerging methods/technologies require specialized knowledge (architecture, engineering), exceed current community capacity to evaluate, implement, maintain, subsequent reliance on external stakeholders for capacity building, knowledge transfer
Reliance on government funding for housing initiatives, high interest rates and debt challenge ability to improve conditions
High cost of energy consumes limited resources
Pilot project design process, objectives, strategies, outcomes
Integrated design process
Prioritized occupant health and safety, reduced environmental impact
Multi-faceted approach to reducing O&M and replacement costs
Duplex/triplex, flexibility to meet changing individual and community needs expected to maximize occupancy
Multi-unit approach to reduce costs, land requirements
Cultural considerations to foster sense of identity, ownership incl.
Complexity increased by exploratory approach, external stakeholders increased cost, challenged capacity building, resulted in negative perception of emerging methods/technologies and multi-unit strategy
Multi-unit strategy goes against community preference, familiarity
Lack of follow-up from external partners with critical expertise, failure to transfer essential skills related to implementation, maintenance and monitoring/assessment
33
Strengths Weaknesses
ceremonial opening, blessing, carvings representing community values
Alternative energy and building orientation tied to worldview
Increased square footage per unit
See above re. partnerships, micro-FiT, use of local labour
Lack of auditing undermines sense of total cost and effectiveness, incl. failure to adequately account for/communicate benefits of multi-unit strategy between all stakeholders
Failure to clearly identify/communicate all options, challenges, opportunities, costs, risks across stakeholders
Failure to realize initial target cost
Unproven technologies failed: turbine could not sustain local wind load, never replaced; cost of circulating alternative heat sources exceeded value of heat produced; see FiT failure above
Geo-exchange problems: costly excavation and system components; potential soil contamination during installation
Unfamiliarity, complexity increased costs: cedar shingle rain wall, round windows, paperless drywall - widespread application, extended drying time, consequent bottleneck
Micro-FiT required special support from government and service provider, costly grid connection for alternative energy feed-in, benefits ultimately not realized
Requires custom replacement parts such as CFL bulbs, seasonal HRV filters
Medicinal garden expensive, unused
Seabird Island First Nation: Case Study – Conclusions
The Seabird Island First Nation case provides important insight into contemporary
Aboriginal housing. The case confirms key issues, and direct and root causes
identified in the literature review. Substandard conditions and insufficient resources
are primary concerns. Beyond this, the sustainable housing pilot project indicates
some of the challenges and opportunities specific to implementing green building
methods and clean technologies in Aboriginal communities. In terms of
opportunities, these strategies are consistent with environmentally-oriented
community values, and further aligned with their need in terms of providing durable,
efficient, flexible, and healthy housing.
34
In terms of challenges, the project demonstrates that integrated processes are not
sufficient to guarantee positive outcomes. Alignment between selected strategies,
community resources, and current/potential capacity is needed, if success is to be
realized. Planning and design should therefore include comprehensive assessment
and communication of options and their perceived benefits and risks between all
stakeholders. Unfamiliarity with solutions in emerging sectors may pose a direct
challenge to such assessment and communications. In cases where capacity is a
challenge, alignment may be fostered by keeping objectives modest, and/or
grounding strategies in proven methods and technologies. Follow-up from external
stakeholders may be a further requisite of success to transferring knowledge and
building capacity, especially where solutions have special requirements for
maintenance, monitoring and/or (re)implementation.
Project auditing is also essential. In this case, the effectiveness of specific solutions
remains ambiguous due to lack of comprehensive auditing, gaps in communication,
lack of monitoring (where applicable), and insufficient post-occupancy analysis.
While this ambiguity undermines the original project goal of providing a precedent
and reference point for future initiatives, it is important to note that the project
acknowledged community values, needs and interests as an important part of the
design process and that, above all else, it successfully provided housing for a
community in need.
The data gathered on the Seabird Island First Nation pilot project does present a
different reality from that of publicly available literature, which focuses on strengths,
and fails to identify many of the challenges faced during development and after
completion. While support for innovative approaches to Aboriginal housing may
rely upon demonstrations of success, it is equally important to identify these
challenges, in order to prevent repeated mistakes and develop best practices for
future initiatives. The challenges identified here suggest valuable areas for future
research on the Seabird Island First Nation pilot project itself, as well as important
considerations for future initiatives in this and other communities. The discrepancy
between publicly available literature and case data highlights the importance of
conducting research to comprehensively assessing project outcomes.
35
Saugeen First Nation: Case Study
Background, Capacity, Current Conditions and Funding
Figure 5: Saugeen First Nation – Sustainable Housing Pilot Project
a) Townhouse Units (8)
Images courtesy of Derek Laronde and Saugeen First Nation
b) ICF Foundation
Images courtesy of Derek Laronde and Saugeen First Nation
36
c) Eleven inch stud walls
Images courtesy of Derek Laronde and Saugeen First Nation
d) Eleven inch studs
Images courtesy of Derek Laronde and Saugeen First Nation
e) Radiant Floor
37
Images courtesy of Derek Laronde and Saugeen First Nation
Table 3: Saugeen First Nation Sustainable Housing Pilot Project – Goals, Objectives and Design Strategies
Goal Objective Strategy
Ensure affordability
Reduce construction costs
Reduce O&M costs
Increase energy/water efficiency
Provide durability
Local labour, training and employment
Multi-unit townhouse approach
Capitalized on existing site services
11” stud walls, R40 insulation
Efficient mechanical system, appliances, lighting, plumbing (low-flow fixtures, faucet aerators, economizer shower heads), drain-water heat recovery (DWHR), radiant slab thermal battery
ICF foundation, laminate vinyl flooring, paperless drywall
Build capacity
Increase knowledge and ability surrounding housing construction/maintenance, alternative energy options
Foster creativity, unity, pride, ownership
Keep resources within community
Local labour, training and employment based on emerging methods and technologies
Local manufacturing of 11 inch framing
One unit features additional
38
Goal Objective Strategy
Test viability of alternative energy sources
technologies (integrated PV/solar thermal, solar air curtain), other units roughed-in for easy retrofit
Ensure occupant health & safety
Reduce mould
Provide high IAQ
Provide durable structure
Vinyl floors, latex paint increase IAQ, reduce cleaning and replacement costs
Paperless drywall resists mould
HRV provides strong ventilation, comfort
ICF foundation R50, sealed with 6mm polyurethane rests on foam and gravel for drainage – prevent leakage, mould
Respond to cultural considerations, demographics
Address community need for family-size units
Avoid institutional feel
Satisfy community aesthetic concerns
Consultation with community
Opening ceremony
All units 3-bedroom with balcony
Middle units set back
Maintained local vegetation
Maintained consistent style with existing housing
Saugeen First Nation: Sustainable Housing Pilot Project – Analysis
Although eventually granted, rejection of the pilot project’s initial application for
funding resulted in a shortened timeline of four months, necessitating construction
throughout winter. Informants thus pointed to ambiguity and complexity in the
application process as challenges, with specific mention of unclear criteria for
qualification and competitiveness. The Band also would have preferred a more
flexible timeframe to allow for design refinements, including exploration of cultural
design considerations.15
That the project was ‘shovel-ready’ was identified as a
requisite of funding approval. Informants point to CEAP funding as extremely
valuable, especially where funds are dedicated specifically to First Nations
initiatives. There is hope that future projects will see similar opportunity. Dialog did
take place between Saugeen First Nation and INAC on potential positive changes
for application processes and criteria going forward.
15
The longhouse was identified as a structural precedent that might have contributed to appropriateness had timelines allowed. One informant also pointed to a planning concept based in traditional community values, wherein roads are kept to the outside of groups of homes that surround a protected communal area. This was viewed as a good strategy for keeping children from playing on the street, and for increasing awareness of their whereabouts. Cultural considerations are expected to contribute to future initiatives; the new administration building may feature a central fire pit, and/or relevant literal representations such as an upside down canoe, a turtle, or an eagle in flight.
39
The multi-unit approach of Saugeen First Nation’s sustainable housing pilot project
was identified by interviewees as unconventional, for and generally not preferred
in, First Nations contexts. It was noted that instances of this strategy are
increasing, however, likely in response to diminishing land base. The Band has
some concern over the potential outcomes of putting people closer together than
they are used to, where historically they have occupied separate tracts of land. No
significant negative feedback had been received on this matter within the project’s
first year of occupancy. Concern was also expressed over how these units might
be passed down from one generation to the next, which informants felt could prove
more complex than with a single-family dwelling, a distinct plot of land, and/or an
existing certificate of possession.
Direct relationships with suppliers of structural, envelope and mechanical system
components were important to reducing project costs. Bulk purchasing and
potential for future procurement contracts allowed middlemen such as retailers to
be avoided, resulting in discounts of up to 50%. Some of these relationships were
newly established, while other existing relationships were brought to the project by
third parties. These third parties were also identified as essential to project
success, possessing critical knowledge, expertise and the ability to relate this to
the project’s vision and objectives within the community. While CMHC was not
involved in the initial project planning and implementation, their international branch
has now formally expressed interest, particularly in the potential for marketing the
project in the United States.
The self-construction approach was not a first for the community: informants cited a
marked positive difference in attitude towards, and quality of outcomes from,
previous self-constructed projects. Specific training and employment outcomes of
the project were not tracked or assessed, and no formal feedback mechanism was
put in place. Informants estimated however, that approximately 90% of project
labour came from within the community. This included representation from different
generations and genders, across a broad range and level of skills. Participants in
the project expressed enthusiasm towards new technologies and methods,
including means for achieving efficiency and R2000 standards. This extended
beyond design and implementation phases into occupancy, and inquiry
surrounding policy and future initiatives.
40
Informants specifically noted that hands-on experience was more valuable than
written information. If mistakes were made in construction, site management was
careful to ensure that these were undone and completed properly, emphasizing the
important relationship between specifications, implementation and performance.
Areas of learning included ICF foundations, vapour barriers, and electrical and
mechanical systems. Although a micro-manufacturing model for the 11 inch wall
studs was envisioned, informants’ opinions vary as to its realization and potential
contribution to future initiatives.
Informants indicated that the self-construction approach changed individuals’
attitudes towards both future initiatives and broader housing policy. One informant
cited a community-based push for mandatory envelope testing in new projects. The
self-construction model was thus seen as important not only for providing specific
training and employment opportunities, but also for educating the community and
strengthening support for housing policy improvements. The Band hopes the high
degree of involvement will act as benchmark for future self-construction initiatives,
including a new administration building.
After the first year of occupancy, the Band undertook a usage evaluation.
Maintenance requirements during this time had been minimal. Despite being better
insulated by the exterior units, central units were unexpectedly found to consume
the most energy. Investigation uncovered an excess of 60 home appliances and
entertainment devices connected within individuals homes, some of which may
draw power even when not in use. HRVs had also been turned off or unplugged
and highly-consumptive air conditioners installed. As a consequence, the Band
intends to create a tenant education program targeting these specific areas.
Analysis of this case is summarized in Table 4.
Table 4: Saugeen First Nation – Strengths and Weaknesses
Note: Table 4 summarizes the analysis of the Saugeen First Nation case according to the strengths and weaknesses exhibited within the community and by the sustainable housing pilot project. It is critical to note that these are determined by the case context, and may result in different outcomes under different circumstances. Accurate interpretation of this table therefore also relies upon due consideration of the case description.
Strengths Weaknesses
Political, institutional, regulatory
10-year strategic plan as basis for community needs assessment
Capacity to locally conduct inspections
Receive support from OFNTSC
Ontario FiT incentivizes alternative
Policy instability: provincial FiT may be abolished
OFNTSC support can include long wait times
Funding dependency on CMHC Section 95, Section 10
41
Strengths Weaknesses
energy, provides opportunity for savings, revenue
Pilot capitalized on increasing diversity of Aboriginal-specific funding (CEAP)
Pilot partnered with external stakeholders for knowledge transfer related to new methods, technologies, direct bulk discount through suppliers
Lack of housing funding flexibility precludes adaptation to emerging circumstances
Dependence on policy support (FiT) for maximum benefit of alternative energy
Socio-cultural including community resources, education, skills, capacity
Existing precedents for self-construction model
Community college trades programs
Local skilled trades, R2000 trained crew
Awareness, education intent behind 10-year plan
Traditional role of Elders in keeping and transferring knowledge
Youth familiarity with technology allows access to information including housing innovations (methods, technologies, programs)
Vestiges of colonialism include enduring socioeconomic disadvantage that affects community resources for funding housing initiatives
Insufficient funding, undermines renovation point system, creates bias in terms of types of projects undertaken
Knowledge gaps re. housing market function, including role of mortgages, consequences if not paid
Knowledge gap/ambiguity surrounding individual role relative to home building choices, relationships with contractors, tenant satisfaction
Tenant sense of entitlement, lack of responsibility for maintenance
Insufficient resources limit renovation/construction, drives rental arrears, undermines maintenance funding – feedback loop, undermines point system
Lack of rent enforcement leads to arrears
Crowding, backlog, high rates of transition
Large families challenge suitability
High energy costs diminish limited resources
Community developing mortgage-based plan
Misperceptions, knowledge gaps re. energy demand of appliances – HRVs unplugged, numerous other passive energy consumers plugged in
42
Strengths Weaknesses
Pilot project design process, objectives, strategies, outcomes
MUP adhered to as basis for recognition, support of INAC/CEAP
Conducted dialogue with INAC on problems experienced in CEAP application
Improved community awareness, attitude, motivation related to future initiatives
(Re-)enforced relationship between specifications, implementation and performance
Provided comprehensive hands-on construction experience and employment opportunities to community members
Modest, simple scope, prioritizes key issues (health, durability, reduced O&M, affordability) aligned with community capacity, resources
Multi-unit approach reduces implementation and operating cost, service and land requirements
All units 3-bedroom – responds to need, demographics, optimizes occupancy
Consultation communicated objectives, ensured absence of opposition, guided aesthetic considerations
See above re. external partnerships
Single demo unit allows testing, analysis prior to scaled up implementation; other units designed for easy retrofit
Opening ceremony
Multi-generational and across-gender representation in local labour construction
Resulted in high Energuide rating of 86/87
Interest from CMHC international in promoting in US – exposure, additional support
Ambiguity of CEAP application resulted in shortened timeline, limited consultation and subsequent cultural considerations
Multi-unit strategy goes against community preference, familiarity; ambiguity surrounding potential for inheritance/will of property
No formal feedback mechanism for training and employment, no formal assessment/tracking of outcomes such as continued training/employment
Increased maintenance requirements of some technologies
Design poses limitations on user behavior, including requirement to keep windows closed for efficient system function
Requires custom replacement parts such as CFL bulbs, seasonal HRV filters
43
Saugeen First Nation: Case Study – Conclusions
As in the prior case, study of the Saugeen First Nation provides important insight
into contemporary Aboriginal housing. The case confirms key issues, and direct
and root causes as identified in the literature review. Substandard conditions and
insufficient resources are amongst the primary concerns. Beyond these findings,
the community’s sustainable housing pilot project indicates some of the challenges
and opportunities specific to implementing green building methods and clean
technologies in Aboriginal communities.
In terms of opportunities, the pilot project demonstrates the feasibility of delivering
cost effective solutions that simultaneously prioritize occupant health, and reduced
operating maintenance costs through durability and efficiency. Modesty and
simplicity of objectives were combined with a successful approach to self-
construction. This allowed rapid delivery, and increased sense of ownership, pride
and interest in the project.
The project was not without challenges. Of particular interest are those surrounding
the application process for funding, including ambiguity of criteria, tight timelines,
and lack of flexibility. This in turn necessitated construction through winter, and
minimized the degree to which the design could be refined, including through
exploration of, and response to, cultural considerations.
Having overcome these, the Nation feels it is now in a position to offer guidance on
similar initiatives beyond their community, and is proud that it did in four months
what some communities take years to do. There is confidence that the methods
and technologies can be re-implemented, and that these solutions have increased
awareness of new possibilities. This positively contributes to the project’s potential
as a prototype for future initiatives, including the mentality of the Nation’s Council
and the broader community towards innovation in residential design. From their
perspective, the sustainable housing pilot project is viewed as a resounding
success, seen as a vital first step towards community sustainability.
44
Treaty 7 First Nations: Case Study
Background on the U.S Department of Energy’s Solar Decathlon Competition
In 2009, students from the University of Calgary applied for the U.S. Department of
Energy’s Solar Decathlon 2011 competition, in partnership with the Treaty 7 First
Nations of Southern Alberta. This collaborative 2-year initiative is the basis of the
third case study.
The Solar Decathlon challenges international student teams to design, build and
operate full-scale solar powered homes.16
The mandate is to demonstrate the
viability of solar power in contemporary residential design, based on the capacity of
solar related technologies to meet household demand. Competing entries must
adhere to international building code and exhibit full functionality of mechanical
systems, contemporary appliances, lighting, and interior and exterior spaces.17
Identifying a specific target market and user group is an additional pre-requisite.
The 2011 competition also saw the introduction of an affordability sub-contest, an
important component in demonstrating the economic viability of proposed
solutions.18
Differences in the nature of this case necessarily impact the degree to which it can
be compared to the previous two. For example, while Treaty 7 offered a functional
definition of a target market for the purposes of the competition, it does not
represent a well-defined community like those of the Seabird Island and Saugeen
First Nations. Rather, significant diversity follows from the member Nations.19
The
type of background research that was conducted in the previous cases – on
specific housing conditions and capacity – was in this case precluded by the scope
of research.
16
Since its inception in 2002, the Solar Decathlon has fostered innovation in green building and clean technologies. While 2011 competition rules prevented use of significant battery storage and limited energy use to that available through global solar radiation, previous competitions have been more flexible, allowing storage and other alternative energy sources such as wind and simulated geothermal systems. As such, the open source materials generated by competitors are a valuable source of data.
17 For a full breakdown of competition rules and sub-contests see www.SolarDecathlon.gov.
18 Unlike the MUP model, the Solar Decathlon’s 2011 affordability sub-contest did not impose a hard limit. Rather,
prototypes were evaluated on total cost, with $250,000 representing a score of 100%, and costs beyond this leading to reduced points.
19 Signed in 1877, Treaty 7 was a peace agreement between these First Nations and the Queen of Great Britain and
Ireland. Member Nations include the Blackfoot Confederacy (Kainaiwa/Blood Tribe, Piikani/Peigan, and Siksika/Blackfoot), as well as the Tsuu T’ina and Stoney First Nations (the latter including the Chiniki, and Wesley/Goodstoney Tribes. While the members of the Blackfoot confederacy share traditions and protocols, these are distinct from those of Tsuu T’ina and Stoney. Beyond diversity of culture, these nations also exhibit substantial differences including contemporary housing capacity, conditions and socioeconomic circumstance.
45
Nevertheless, the Treaty 7 First Nations / Solar Decathlon 2011 project is seen as
an important precedent for consideration. The design’s strategies were informed by
similar housing issues, and demonstrate innovative approaches not only to green
building and clean technologies, but also to cultural appropriateness. Furthermore,
firsthand experience throughout design and implementation provided insight that
did not follow from the other cases, including exposure to relationships between
processes, objectives, and stakeholders across project phases. 20
Extended
consultation with Aboriginal community representatives was particularly valuable in
establishing mutual trust, allowing for a more in depth exploration of the impact of
root and direct causes of current housing conditions, and the potential of cultural
design considerations to address these.
Treaty 7 First Nations – TRTL Sustainable Housing Pilot Project: Description
The rationale for selecting the Treaty 7 First Nations as a target market was based
in part upon lessons learned in the 2009 competition. Founding students of the
2011 project wanted to improve upon this precedent, where they felt that outcomes
of the event itself are limited, that the 2009 project did not achieve its potential
impact beyond these limits, and subsequently that return on investment would be
increased if the 2011 project were better aligned with real world needs and
interests from its inception. As such, the project sought to explore:
Added value of solar power in Aboriginal contexts;
Modular construction and temporary foundations, as a means to
circumnavigate barriers to private home ownership on reserve lands;21
and
Culturally driven improvements to contemporary Aboriginal housing.
Dubbed TRTL (pronounced “turtle”, short for Technological Residence Traditional
Living), this project was the only proposal to be accepted from a Canadian
institution in the 2011 competition.22
In the first application phase, consultation within and beyond Treaty 7 First Nations
identified key housing issues including mould, fire, flooding, crowding and disrepair.
At this time, magnesium oxide structural insulated panels (SIPs) were selected as
20
As the primary researcher of this paper, I also acted as the TRTL project manager for 1 year, and the Aboriginal relations manager and chair of the Aboriginal Advisory Council for 1 year.
21 Key informants confirmed the potential of such methods to allow for home ownership.
22 For more information on TRTL, including virtual tours and material specifications, see www.SolarDecathlon.ca.
46
the building material strategy, where the product has the potential to address key
issues (it is durable, resists both fire and mould, and allows for rapid assembly); it
was seen as well-suited to modular construction; and product sponsorship was
available. A preliminary version of the mechanical systems was also drafted at this
time. Key objectives were to provide reduced operating and maintenance costs. A
purely electric strategy resulted (without solar thermal components), based on an
air source heat pump, a bi-directional hydronic fan coil, and a heat recovery
ventilator (HRV). While the absence of solar thermal decreases cost effectiveness,
this was also seen to reduce maintenance needs and risk of mould from water-
related circulation components.
During the second application phase, the pool for community consultation was
expanded to include local Elders, Chiefs, and professionals such as architects, and
housing and infrastructure managers.23
These consultations identified the Tipi as a
precedent for traditional form and function. An architectural studio was used to
develop concepts, resulting in an overarching strategy to push conventions of both
modular and contemporary Aboriginal housing. The design that emerged paid
homage to Treaty 7 spirituality, referencing the Tipi’s rounded form and east-facing
entrance, which relate to the sun as a traditional source of energy and life.24
Following the studio, representatives from within and beyond Treaty 7 were invited
to form an Aboriginal Advisory Council (AAC) to the student team, in order to
achieve more consistent and in-depth input from the community. At the AAC’s
recommendation, a Spiritual-Cultural Advisor was also sought out, to mentor the
team and validate the project according to protocols of knowledge transfer and
ceremony.25
Design progressed through exploration of additional cultural considerations,
transportation strategies, engineering of mechanical and electrical systems, and
23
The team’s initial vision also included community capacity building as an outcome, to be achieved through partnership with one or more Treaty 7 trades institutions. This vision was not realized however, due to challenges of funding, logistics, and administrative barriers to inter-institutional relationships.
24 Although alternative designs on the same concept received preferential feedback from some informants, this chosen
iteration concept was preferred by academics and building industry professionals – its perceived systematic nature was thought to be more readily modified and built in a student context, and would also provide consequent flexibility to adapt to different contexts beyond the competition.
24 Appendix D illustrates the initial TRTL design concept, as well as
the other primary design concept produced at this time.
25 The term ‘Spiritual-Cultural Advisor’ was put forward by the AAC as a more politically correct and accurate version of
the term ‘Elder’. The latter can be misleading, as it denotes specialized experience in a certain area of knowledge rather than indicating age; a person can become an ‘Elder’ at a very young age, and may be much younger than those upon whom he or she is responsible for providing guidance or imparting knowledge. The role of Spiritual-Cultural Advisor was viewed by the AAC as a critical one, where specific traditional knowledge surrounding the home must be conveyed by individuals with transferred rights to do so. This knowledge is treated as highly sensitive, and cannot be conveyed with explicit permission from such an individual. Also, note that previous reference in the text to an Elder is intentional, based upon that individual’s own use of the term.
47
design of interior space. Results include a flexible floor plan resembling the Tipi,
centered on the kitchen as a space for family and community gathering. Interior
finishing features natural materials, and a color palette that references the four
elements and the medicine wheel. Decorative elements include cultural items, and
a traditional winter count – a pictographic account of the project participants, and
the home’s creation – painted on a canvas liner that covers the vaulted ceiling.
Structural engineering is based on the magnesium oxide SIPs mounted to a
galvanized steel sub-frame. While recognized as lacking cultural appropriateness
relative to a wood frame, steel was selected to avoid warping from humidity
changes between Alberta and Washington D.C. It was also sourced more
affordably than glue laminate wood. The home’s electrical needs are met by a grid
tied 8.7kW photovoltaic array, connected to a series of micro-inverters. Micro-
inverters were chosen to increase efficiency, and prevent system disruption in the
event of individually shaded or damaged panels. These also allow per panel
monitoring, and reduce voltages for safer installation.
In terms of resources, every successful applicant to the Solar Decathlon is
awarded $100,000 by the U.S. Department of Energy, conditional upon completion
of specific competition tasks and deliverables. Beyond this, it is up to individual
teams to determine requirements and sources for project funding. All resources for
TRTL were raised by students, staff and community members of the team. The
private sector was the primary source of donations for both funds and in-kind
materials. The home was displayed publicly on the West Potomac Park in
Washington D.C., from September 23rd
– October 2nd
2011, placing 10th out of 19
teams. Relationships between goals, objectives and strategies specific to this case
are summarized in Table 5.
48
Figure 6: Treaty 7 First Nations – TRTL Sustainable Housing Pilot Project
a) Photo render of home
Images by Johann Kyser
b) Steel sub-frame and SIPs during construction
Images by Johann Kyser
49
c) Plan: interior spatial function
Images by Johann Kyser
d) Design inspiration: the Tipi
(Treaty 7 Management Corporation Tipi here)
Images by Johann Kyser
50
e) Open social space centered on kitchen, dining room
Images by Johann Kyser
Table 5: Summary of Goals, Objectives and Strategies
Goal Objective Strategy
Ensure occupant health & safety
Prevent mould
Prevent fire
Provide high IAQ
Ensure structural and interior durability
Magnesium oxide SIPs: resist fire and mould, complemented by sprinkler system
Simple, efficient, purely electric mechanical system based on HRV, air source heat pump, bi-directional hydronic fan coil; PV micro-inverters reduce voltage for safe installation
Ventilate key areas: kitchen range and bathroom fan
Durable hygienic finishes: cork flooring, vinyl counters, glass tile; low VOCs
Durable structure: magnesium oxide SIPs and steel sub-frame, extended lifecycle estimated at 75-100 years
Establish economic viability
Reduce O&M and replacement costs
Provide legal ownership on reserve lands as means to build equity
Purely electric highly efficient mechanical system to simplify operating and maintenance (including HRV, air source heat pump, hydronic fan coil, forced air ventilation)
Photovoltaic (PV) power – 8.7kW net zero system, free up financial resources to contribute to rent/mortgage payments, potential FiT
51
Goal Objective Strategy
revenue; micro-inverters improve efficiency, allow per- panel monitoring
Durability, lifespan (see health and safety)
Modular structure and screw pile foundations result in temporary structure as means to foster legal ownership (see project description)
Provide cultural appropriateness
Explore potential for home to reflect worldviews, lifestyles, traditions, protocols, values, needs and interests
Determine whether this would increase sense of ownership, responsibility for the home
Solar power: sun viewed as traditional source of energy and life
Tipi inspired form: round, east facing entrance – relate home to sun, foster positive spiritual and spatial energy
Natural materials, colors: cedar, cork; colors of 4 elements, ochres
Connection to landscape: south facing patio and bay windows, rounded form minimizes visual impact
Oral culture: canvas interior with winter count references tipi liner, pictographic story connects home to traditions of family, community, and home’s creation
Four ceremonies held to validate the home through blessing and naming in the Blackfoot language – “Spo’Pi”
2-bedroom design in response to demographics of young families – maximize occupancy within 1000ft2 competition limit
Flexible, open living space: centered on kitchen, fosters gathering, cooking eating according to community values
Non-load bearing wall between bedrooms allows for conversion to single bedroom or studio/office to accommodate changes in household structure.
52
Treaty 7 First Nations – TRTL Sustainable Housing Pilot Project: Analysis
The monitoring and judgment of TRTL in the Solar Decathlon 2011 offers important
data for consideration. Simultaneously, acknowledging the project’s initial intent is
integral to a more comprehensive assessment, based on response to real world
issues and partnership with actual community stakeholders. Findings from both
areas are synthesized, and organized according to consideration of the initial
rationale, the design process, objectives and strategies, and lessons learned
through implementation.
The location of the University of Calgary within traditional Treaty 7 territory
provided an important foundation for working with the community. This allowed for
more frequent access to individuals and organizations, and contributed to their
willingness to participate. Despite this access and willingness, relationships
between community representatives and other parts of the team were often
strained. The short and demanding project schedule challenged community
participation, and the student team’s capacity to respond to input. Had timelines
allowed, it would have been preferable to bring the AAC and Spiritual-Cultural
Advisor on board prior to initiating the design process, in order to better establish
roles, responsibilities, and a more unified strategic vision between the competition
requirements and the community’s values, needs, interests. Timelines, and vested
interests within the institution, also undermined integration across disciplines,
particularly between architecture and engineering.
The student team’s relative inexperience in Aboriginal initiatives presented
additional challenges surrounding cultural protocols, sensitivities, inclusiveness and
appropriateness of language. Contribution by most participants was also voluntary.
Subsequent turnover within the student team undermined knowledge transfer and
consistency of objectives and strategies. This necessitated repetition of numerous
design processes, and in some cases prevented response to community input. Had
resources and institutional decision-making allowed, it would have been preferable
to compensate individuals for their work, to foster accountability and commitment
and improve efficacy.
Of particular importance to the team’s organization, function, and to overall project
outcomes was the insistence by Treaty 7 representatives that their input exceed
that found in a more conventional designer-client relationship. Their occupation of a
central role in project decision-making was viewed as a critical part of authentic
53
orientation towards Treaty 7 First Nations identity. At times this challenged other
team members’ sense of ownership and control. Patient and respectful dialog was
integral to resolving conflict, bridging cultural gaps and achieving consensus.
Ultimately these challenges were overcome, with results consistently viewed by
participants as a true and meaningful partnership. This eventually came to define
the project itself, and was critical to developing a better understanding of
challenges and opportunities in this context.
Community input was also particularly valuable in confirming root causes of
contemporary housing issues, and identifying opportunities to address these
through project design. Long-term relationships allowed sufficient trust to develop.
Community participants were then willing to share personal experiences of
attempted cultural assimilation, malignant policy, substandard housing, and the
influence of these forces on Aboriginal peoples’ current struggles with identity and
dispossession. The project’s Spiritual-Cultural Advisor emphasized a significant
gap, where contemporary housing methods and technologies have not been
adequately translated or interpreted into Aboriginal ways of thinking and living. His
teachings point to identification of parallels between Aboriginal and non-Aboriginal
cultures as an important means to bridge this gap, and to improve broader cross-
cultural relations. Ceremonies at specific locations and times throughout the TRTL
project followed this guidance, and became an integral part not only of validating
the project according to community protocols, but also of facilitating learning and
appreciation for different perspectives.
Examining the project’s rationale, the value of solar power in Aboriginal contexts,
was initially acknowledged as ambiguous. Expectations of benefit centered on the
potential of distributed energy – as an important but ill-defined area for exploration.
The primary challenge anticipated was the high cost associated with photovoltaic
technologies. A critical finding that was not anticipated was the substantial amount
of support for solar power that was expressed by Treaty 7 participants as a result
of synergy with their own spirituality, which holds the sun as the creator of all
energy and life on earth. This synergy emerged through the course of the project,
as local traditional values and beliefs were revealed. Although it is impossible to
quantify the benefit of such a connection, it clearly influenced community interest
and buy-in in this case, and could prove significant in other contexts where similar
beliefs are held.
54
Community representatives and public observers of the competition also expressed
interest in the potential of solar power to provide independence from conventional
energy sources, especially in remote communities. The degree to which the TRTL
design pursues this was determined in part by the competition rules, which prohibit
significant battery storage and dictate that all prototypes be tied to a micro-grid.
The grid tie model is based on real world applications, wherein conventional energy
sources are used to counter the intermittency of alternative ones. Thus TRTL does
not represent a fully independent or off-grid design (which would incur additional
costs of battery storage and related systems). Rather, the home was engineered
for annual net-zero performance – generating as much or more energy than it
consumes over the course of a year. Specifically, excess energy is produced
during peak times (daytime, especially during summer), to be fed onto a
conventional grid and sold to the existing service provider, and repurchased during
non-peak times (night, and short winter days).26
While not fully independent, TRTL does have the potential to offset operating costs
through reduced demand for conventional energy sources. As indicated, initial cost
of PV technology itself was anticipated as a key challenge to the viability of solar
power in Aboriginal contexts, where funding is already an issue, and where PV
panels remain more expensive than conventional methods of generation. Here,
viability must be considered not only in the context of the grid tie model, but also
relative to the home’s overall cost, outcomes of the design, and broader industry
trends.27
The official competition cost estimate for TRTL was $294,000USD, including labour
and transportation.28
While this price point exceeds the resources of many
Aboriginal communities (and likely all regional MUPs), several factors must be
considered before ruling out the prototype’s economic viability. Firstly, this estimate
represents the cost of a one-time build. Intent for the prototype’s real world
application is based on mass production, which would reduce costs of material
26
Preliminary net metering of TRTL occurred in Washington D.C. for the 10 days of competition. The home consumed more energy than it produced at this location and time. These results are not sufficient to determine likely outcomes of annual performance however, where there was substantial cloud cover and rain, and where performance was modeled for a 12-month balance in Alberta. Further testing is required to determine if the system captures energy as intended.
27 A comprehensive evaluation of the grid tie model’s applicability in Treaty 7 First Nations and other Aboriginal
contexts is beyond the scope of this research. Viability depends upon a number of complex and interrelated factors including but not limited to: current energy sources, pricing, and infrastructure; provincial energy policy, including feed-in-tariffs; willingness of local service providers to implement feed-in technology; quantity and quality alternative resources; and the cost, efficiency and scale of technologies deployed.
28 Internal estimates by the team are outstanding. Where TRTL is approximately 1000ft
2, this works out to $294USD
per square foot. See competition rules for detailed information on how transportation was estimated and normalized between teams.
55
fabrication and labour. Secondly, TRTL’s structural lifecycle is estimated at 75-100
years or more, a dramatic improvement relative to current Aboriginal housing in
many communities. TRTL’s PV system represents approximately 20% of the total
initial cost, or $59,000CDN, including installation.29
During the anticipated structural
lifecycle, the PV system will need to be replaced approximately three times. Even if
PV prices remain constant over this period, the cost of the TRTL including this
replacement is competitive with current reserve housing in the long-term.30
To
generalize for purposes of comparison:
Poor quality of contemporary Aboriginal housing necessitates recurring
investment of approximately $100,000 every 10 years for 100 years. Total
= $1,000,000
TRTL represents an initial investment of $300,000, plus PV replacement
costs of $60,000 every 25 years. Total = $480,000
This preliminary estimate suggests that TRTL is economically viable in the long-
term. A comprehensive assessment relies on numerous other factors beyond the
scope of this research, including but not limited to: potential cost reduction from
mass production; reductions in PV pricing over this period;31
increased pricing of
conventional sources over this period; broader economic and environmental
implications of reduced demand for conventional energy sources; potential for FiT-
based revenue, and numerous areas of added value discussed below.
Quantification of these benefits is thus an important area for future research.
Unfortunately, the initial capital requirements present a barrier to many Aboriginal
communities regardless of long-term potential, with MUP representing an additional
impasse.
Here it is important to note that removal of the PV system puts the one-time build
cost at $234,000, which is only marginally higher than the cost of R2000 homes
being built in some Treaty 7 communities – at $225,000 per unit. This suggests that
TRTL’s construction costs are competitive, especially if mass production leads to
further price reduction.
29
Within the grid tie model, the PV could also be complemented or substituted for more cost-effective alternatives such as solar thermal, wind, or geothermal systems.
30 The actual frequency and cost of replacement will depend heavily upon on industry trends, which have recently seen
significant reduction in prices and increases in efficiency. Replacement need is cited here as once every 25 years based on manufacturer warranty, and specifications of efficiency decrease below 80% after this period.
31 Prices for PV have dropped significantly in recent years. See: http://eetd.lbl.gov/ea/emp/reports/lbnl-5047e.pdf
56
Considering the second rationale for selecting Treaty 7 as the project’s target
market, key informants support modularity and temporary foundations as a viable
strategy for allowing private home ownership on reserve lands.32
The objective of
this strategy would be to provide a mechanism for individuals to mortgage the
actual unit without possessing land title. This would in turn allow individuals and
families to build equity and finance improvements, for example through
renovations, upgrading, and/or starting a small business or farm.
Feasibility of this approach depends in part upon the capacity of enforcement
bodies to seize mortgaged assets. In the case of a modular structure, this in turn
depends upon ease and cost of (dis)assembly and transportation.33
TRTL’s
complex and costly requirements – including a large crane and 6 flatbed trucks –
indicate that a much simpler structure must be developed in order to realize this
objective. Entries in the 2011 and previous Solar Decathlon competitions offer
superior precedents. In particular, the 2011 Illinois team’s pre-fabricated prototype
can be shipped on a single truck and (re)assembled in less than 24 hours. Looking
forward, a key challenge to achieving this objective is the merging of easy transport
and (dis)assembly with a culturally responsive design.34
Indeed, simplification is a critical next step to commercial viability of TRTL overall.
The initial design approach – to push formal boundaries of modular and Aboriginal
housing – can be viewed as a key driver of both the project’s greatest strengths
and its greatest weaknesses. The design broke numerous conventions of
architectural and industry practice, resulting in a uniquely appropriate form that
resonated with Treaty 7 spirituality and values. Community representatives
supported the idea that such a design could foster a sense of identity in the home,
which could in turn lead to increased sense of ownership and responsibility for it.
This (re)connection between Aboriginal peoples and their homes represents a vital
step to improving housing conditions both on and beyond reserve lands.
32
TRTL is intended to rest on screw piles, which must be evaluated according to local conditions. One key informant did express doubt in the soundness of this approach, citing connectivity of modules as source of building envelope failure in existing modular projects. It was not however the legal underpinnings of the approach that were questioned.
33 Capacity for seizure of assets is further complicated by location on reserve lands, requiring enforcement by local
agencies. This dependency might deter external institutions from entering into the necessary mortgaging agreements in the first place, unless sufficient trust can be established between stakeholders.
34 The competition’s rules also include size restrictions, which encourage creative approaches towards spatial
efficiency and flexibility. Innovation in this area may prove valuable in addressing overcrowding in Aboriginal contexts. Measures to expand sleeping capacity are of particular import, but must be evaluated according to contextual criteria, including the need for durability.
57
Simultaneously, the complexity of TRTL’s form results in challenges not only to the
strategy of legal ownership through modularity, but also to other factors within and
beyond Aboriginal contexts. The building’s shape is ill-suited to the original
manufactured form and structural characteristics of the SIPs, necessitating
significant modification, and inclusion of a custom built sub-frame, with associated
increases in material and labour costs.35
The large number and unusual nature of
connections increase risk of leakage and therefore of mould. The home’s rounded
roof and floor plan present additional challenges to PV efficiency, as well as
mechanical systems design and cost. The disassembly strategy that follows from
this shape further results in recurring damage to the SIPs, limiting the number of
times that the structure can feasibly be moved. Beyond impacting cost, durability,
and systems, the complexity of the design challenges buildability and replicability,
and thereby fails to respond to issues of capacity and overall demand in Aboriginal
contexts.36
Analysis of this case is summarized in Table 6.
Table 6: Treaty 7 First Nations – Strengths and Weaknesses
Note: Table 6 summarizes the analysis of the Treaty 7 First Nations case according to the strengths and weaknesses exhibited within the communities and by the sustainable housing pilot project. It is critical to note that these are determined by the case context, and may result in different outcomes under different circumstances. Accurate interpretation of this table therefore also relies upon due consideration of the case description.
Strength Weaknesses
Design Process
Partnership between local community, student body and industry professionals fostered willingness of, and access to, participants
Patient and respectful dialog aided conflict resolution, informed consensus
Length, extent of partnership fostered trust necessary to broach sensitive topics
Adherence to community protocols of knowledge transfer greatly increased two-way cross-cultural learning
Validation according to local tradition increased community
Sort and demanding schedule challenged degree of, and capacity to respond to, community input, resulting in increased tension
Formal consultative board established after (not prior to) initiation of design process - undermined clarity and consistency of roles, responsibilities, objectives, strategies
Team inexperience in Aboriginal contexts: ignorance of protocols, sensitivities, significance of inclusiveness
Inability to compensate for participation undermined commitment, accountability, drove
35
For the competition, steel was sourced more readily and affordably than glue laminate wood. Timber framing was ruled out due to potential warping from humidity changes between Alberta and Washington D.C. (as experienced in the 2009 post and beam construction). In exploring substitution, all options would need to be compared relative to objectives of affordability, durability, health and safety.
36 As an emerging technology, SIPs themselves are subject to unfamiliarity relative to conventional methods such as
stick frame. Beyond their benefits to health and safety, they do offer advantage of prefabrication in controlled conditions. Their availability may be limited however, and the custom sub-frame required by the design likely presents additional supply chain challenges.
58
Strength Weaknesses
buy-in, support high turnover
Institutional prioritization of architecture, exclusion of other disciplines undermined holistic vision, interdisciplinary integration
Objectives, Strategies
Prioritization of health, safety, durability, cultural considerations
Synergy between PV and worldview increased community buy-in, support
Long-term view of economic viability through reduced O&M, replacement costs
Facilitate legal ownership through modular construction, temporary foundations
Potential for reduced cost via mass production
Reduced environmental impact through alternative energy, energy efficiency
Initial capital cost exceeds community economic resources, and likely MUP
Economic viability depends partly on grid tie, FiT
Architectural form increased cost and complexity of construction, systems design, (dis)assembly and house transport; ill-suited to materials and community capacity
Complexity and cost of TRTL transportation and (dis)assembly hinders ability to seize mortgaged asset, undermining ownership goal
Absence of solar thermal reduces cost effectiveness
Viability depends on increase in available Band funding, policy support for increased capital expenditure, and support of grid tie
Viability, higher initial capital required for innovations in durability, alternative energy
Complexity, competition within socio-political organization of Treaty 7
Technologies best suited to address current housing issues are still relatively new and emerging resulting in higher costs.
Grid tie model dependent on extensive and expensive support infrastructure and services, delaying its adoption as a feasible alternative in most First Nations contexts.
Grid tie model depends on existence of conventional energy sources, infrastructure, additional support of policy, service providers, technology
59
Treaty 7 First Nations: Case Study – Conclusions
The Treaty 7 First Nations case offers important insight into the implementation of
green building methods and clean technologies in Aboriginal communities. The
pilot project was also particularly valuable in confirming the significance of cultural
design considerations in this context. The partnership with Treaty 7 First Nations
was essential to learning in both of these areas, illuminating relationships between
community values, needs and interests and strategies such as solar power and
architectural form.
Project successes include the creation of a durable structure that promotes
occupant health and safety, and reduced dependence on conventional energy
sources. Further study is needed to confirm benefits such as indoor air quality, or
the economic competitiveness of solar power relative to conventional energy
sources in Treaty 7 communities. Here, the academic nature of the project
represents both weakness and strength. The home will not actually be lived in, so
evaluation will rely on simulation rather than results of real occupancy.
Simultaneously, there will be no occupants to disturb when accessing, monitoring
and modifying systems and features.
In terms of process and strategies, TRTL is not dissimilar from the Seabird Island
First Nation pilot project: complexity undermined success in both cases, including
achievement of affordability and alignment with community capacity. In this case,
these objectives were not sufficiently prioritized relative to others, such as the
decision to push formal boundaries of contemporary modular and Aboriginal
housing. Consequently, the TRTL design must be simplified and its cost reduced
before commercialization can be pursued. These remain realistic goals however,
and define important areas for future research.
One of the project’s most important outcomes, TRTL fostered a unique exploration
of cultural appropriateness in Aboriginal housing design. The home provides
numerous reference points for future initiatives – from synergies between energy
sources and Aboriginal worldviews, to significance of spatial function and materials
selection. Integration of the community’s values, needs and interests was essential
to achieving their support for the project. They further confirmed that such
measures may help to foster a sense of ownership and pride in the home, a
challenge for many individuals and families today, especially the younger
generations.
60
The prohibitive cost of TRTL should not necessarily be viewed as an outcome of
exploring cultural appropriateness. As indicated, removal of the home’s PV system
places it in competitive range with existing R2000 developments in Treaty 7
communities. That said, cost was influenced by the project’s exploratory nature. To
avoid similar risk in future projects, relationships between variables must be
carefully considered – for example those between form, material selection, modular
(dis)assembly and/or transportation strategy. It is difficult to determine whether a
less ambitious approach to design would have achieved the same degree of
appropriateness. While this certainly increased complexity, cost, and overall risk37
,
it also fostered innovation, and resulted in a strong foundation for future research.
37
Perceived risk from the exploratory approach included potential failure to complete the project. Such failure could have had serious consequences, impacting perception towards initiatives of this nature, disappointing expectations set within the community, and decreasing likelihood of future collaborations.
61
Table 7: Case Study Comparison – Summary of Strategies with Multiple Objectives
Objectives Cases
Inhi
bit m
ould
,
prov
ide
IAQ
Dur
abili
ty
Red
uced
O&
M, r
epla
cem
ent
cost
s*
Incr
ease
d en
ergy
/mat
eria
l/wat
er
effic
ienc
y
Red
uced
dep
ende
nce
on
conv
entio
nal e
nerg
y so
urce
s
Red
uced
Env
.
Impa
ct
Cul
tura
l app
ropr
iate
ness
Fle
xibi
lity
of
spat
ial f
unct
ion
Sea
bird
Isla
nd
Firs
t Nat
ion
Sau
geen
Firs
t Nat
ion
Tre
aty
7
Firs
t Nat
ions
Strategy
Paperless drywall
• • • • • •
Magnesium oxide SIPs
• • • • •
Insulated concrete forms
• • • •
Radiant slab, thermal battery
• • • • • •
Efficient mechanical, electrical, appliances
• • • • • • • •
Rough-in for mechanical retrofit
• • • •
Durable, efficient envelope
• • • • • • •
Healthy finishing • • •
Hard flooring • • • • • •
Alternative Energy
• • • • • • •
Local natural materials
• • • • • • •
Repurposed materials
• • •
Physical orientation
• • • • • •
Function of interior space
• • • •
Modular structure, temporary foundations
• • •
62
Table 8: Pilot Project Comparative Summary – Performance Improvements and Strengths
Cases
Seabird Island First Nation
Saugeen First Nation
Treaty 7 First Nations
Performance Improvements
Occupant health, safety • • •
Cultural appropriateness • •
Reduced O&M and replacement costs unknown • expected
Energy/water/material efficiency • • •
Durability, extended lifecycle • • •
Reduced dependence on fossil fuels NA (hydro) • •
Reduced environmental impact • • •
Flexibility of interior spatial function, unit size • •
Potential to retrofit additional features, systems
• •
Unit size responds to community needs • • •
Reduced land/service costs, requirements • • •
Modular structure and temporary foundations facilitate private on-reserve ownership
•
Project Strengths
Community consultation, participation in design
• • •
Self-construction increased capacity, awareness
• •
External partnerships shared knowledge, reduced costs, connections for future initiatives
• • •
Integration of emerging standards, ratings into project assessment
•
Leveraged policy, infrastructure support for alternative energy
• • •
Financial support included new opportunities specific to Aboriginal initiatives
• • NA
63
Table 9: Pilot Project Comparative Summary – Difficulties, Failures and Weaknesses
Cases
Seabird Island First
Nation
Saugeen First Nation
Treaty 7 First Nations
Difficulties, Failures
Unfamiliarity with methods and/or technologies led to cost overruns
• •
Ambiguity, complexity of process led to shortened timeline, limited amount of consultation
• •
Methods, technologies failed to perform as expected
• •
Onerous systemic requirements of technologies prevented realization of intended benefits
•
Project Weaknesses
Cost, complexity mis-aligned with community capacity, resources
• •
Absence of comprehensive auditing undermined sense of project cost, effectiveness vs. conventional approach
•
Lack of follow-up from and bankruptcy of external stakeholders undermined knowledge transfer
•
Absence of feedback, formal tracking of outcomes from self-construction
• •
Multi-unit approach contrary to community preference
• •
Partial dependency on policy support for alt. energy benefits
• • •
64
Conclusions and Recommendations
This report confirms the existence of key housing issues and problematic housing
conditions in Aboriginal communities, which undermine the health and well-being of
these peoples in different regions throughout Canada. Housing failures emerge
from inadequacies of design, insufficient resources, and numerous other direct
causes that are complex and interrelated. Research has also confirmed origins root
causes, manifest in broader systemic issues. These include problematic policy,
legislation, and history of cultural oppression. Intervention at the project level has
the potential to address key issues, conditions, and direct causes. For example,
contemporary green building methods offer superior performance in terms of
occupant health and safety, and durability relative to housing in many Aboriginal
communities. Simultaneously, strategies that have been explored also demonstrate
potential to counter root causes at the systemic level. Cultural design
considerations foster a sense of ownership and pride in the home, which may
translate into increased responsibility for maintenance; and modular structures and
temporary foundations may provide legal bases for private ownership on reserve
lands.
Beyond confirming issues, conditions, and their direct and root causes, research
has also identified challenges and opportunities that accompany emerging green
building methods and clean technologies. The case studies and pilot projects
provide insight of how these may be further affected by implementation in
Aboriginal contexts. Where insufficient resources are a key challenge, their
conservation and effective use is essential. Beyond integration in the design
process, efficacy relies upon clear understanding and communication of objectives
and strategies. Incremental deployment of advanced methods and technologies
may be the best way for communities to explore and capitalize on emerging
sectors without overexposure to cost and risk.
A critical issue that did not stand out in the literature review, but which was clearly
relevant in all cases, was community capacity. While not unique to Aboriginal
communities, capacity challenges have been exacerbated by historical events and
problematic policies in these contexts. Relationships between different
stakeholders are an important part of building and transferring knowledge and
capacity. When these relationships occur between Aboriginal and non-Aboriginal
65
peoples, awareness of Aboriginal perspectives are a critical component of respect,
inclusion, trust and productivity.
It is evident that capacity (or lack thereof) may influence project outcomes through
all phases, from inception to implementation, and on to inspection, maintenance,
post-occupancy evaluation and monitoring. Models for self-construction provide a
viable means to gain relevant skills and knowledge, and foster awareness of
methods, technologies and policies. Occupant education and training is also
integral to improving conditions and fostering responsibility. Successful self-
construction and education initiatives are thus potential foundations for self-
determination in Aboriginal communities, leading to positive feedbacks through
housing-related socioeconomic outcomes such as employment (CMHC 2010).
Progress in this direction is highly desirable from the community perspective, with
the potential to improve individual and community health and well-being. Capacity
building is therefore one of the most crucial considerations that should inform future
initiatives.
The Saugeen First Nation case highlights the potential of individual housing
projects to contribute to capacity building, as a foundation for sense of ownership,
pride, receptivity and community momentum. One informant from the Treaty 7 First
Nations case also cited the Habitat for Humanity model as having demonstrated
similar success. Simultaneously, the Seabird Island First Nation case is illustrative
of challenges to capacity building that may emerge from complexity, unanticipated
requirements, unproven technologies, or dependence on external stakeholders.
Success in capacity building therefore depends upon careful coordination of
objectives, strategies, assessment of current and potential community resources,
and lasting stakeholder relations.
Within the case studies, the pilot projects in sustainable housing provide a broad
spectrum of green building methods and clean technologies to consider. Tables 1-6
provide a summary of the relationship between goals, objectives and strategies
found within each case. Unfortunately, while many of the strategies presented by
the cases demonstrate potential, their success cannot be comprehensively
assessed herein. Rather, a detailed assessment of their effectiveness depends
upon further research in numerous areas. For example, mould prevention
strategies can only be adequately assessed through post-occupancy evaluation of
physical assets and monitoring of indoor air quality over extended periods of time.
66
Similarly, viability of alternative energy systems requires careful performance
monitoring, and analysis of economic and environmental outcomes relative to
conventional systems. That said, many of the methods and technologies examined
demonstrate potential, even in cases where their success may have been
undermined by contextual factors.
Identification of design processes, objectives, strategies, outcomes, and
subsequent analysis of strengths, weaknesses, opportunities and threats is
therefore central to the value of this research. Subsequent understanding of
contextual influence will ideally inform future initiatives, allowing individuals,
organizations and communities to avoid pitfalls, mitigate risk, and capitalize on
emerging trends in industry and policy. Consistent with the findings from the
literature review, some of the challenges and opportunities that accompany
emerging sectors are universal, while others are more prevalent in or even unique
to Aboriginal contexts. For example, while unfamiliarity and capacity are not
uniquely Aboriginal challenges, they may be exacerbated by historic factors
specific to this context. Again, Tables 1-6 provide summaries of each case, and
findings are compared in Tables 7-8.
Several important areas have been identified for future research specific to
Aboriginal contexts. As noted in two of the case studies, economies of scale have
an important role to play in improving Aboriginal housing. The Saugeen First Nation
pilot project demonstrates affordable implementation of sustainable technologies,
including reduced operating costs, and potential improvements in durability and
occupant health. Success of this project was based in part on a multi-unit strategy,
which in turn facilitated reduced cost through bulk purchasing agreements. In the
absence of a multi-unit strategy however, the amount of construction occurring in
many Aboriginal communities should still provide ample foundation for similar
arrangements. In the Treaty 7 First Nations case, mass production would likely
offer reduced costs, thereby increasing viability, with the potential to generate a
large number of homes that could be rapidly deployed. Economies of scale also
play an important role in determining the viability of alternative energy initiatives,
influencing their significance relative to conventional sources, their overall
efficiency, and their capacity to meet demand. This may in turn influence
willingness of local governments and service providers to facilitate grid connections
and provide FiTs.
67
In Aboriginal contexts, pre-existing models for communal ownership represent
opportunity related to economy of scale. For example, as the owner of all reserve
homes and infrastructure, a given Band can elect to implement technologies at the
community scale rather than depending on individual uptake. This may be true not
only of alternative energy sources, but also of innovations in water-related
technologies such as capture, filtration, and reuse. Whether the degree of control
held by Band management allows for more rapid implementation of innovation than
that of non-Aboriginal communities is an important question. Two precedents have
been identified in this area. First, the community-scale solar thermal installation in
Drake’s Landing, Okotoks, Alberta has garnered international attention, met initial
targets, and is now the subject of feasibility studies for larger scale application.
Secondly, solar power installations in the T’Sou-ke First Nation in British Columbia
have contributed to capacity building, and generated revenue not only from
alternative energy, but also from related spinoffs such as tourism.
As identified in the literature review, private home ownership on reserve lands is
perhaps the most uniquely Aboriginal housing challenge. Currently, debate
gravitates towards the related issue of land ownership, which remains highly
contentious between different communities and external stakeholders. This report
has identified another opportunity: further investigation into modular construction
and temporary foundations is warranted, as means to circumnavigate legal
barriers.
Legal barriers aside, the historical absence of cultural considerations in Aboriginal
housing design has thoroughly undermined actual sense of ownership, with
implications for the relationships between Aboriginals people(s), their homes, their
communities, and themselves. While the cases studied here offer insight into
cultural appropriateness, far more research is needed to adequately understand
the implications of improvement in this area, and to establish best practices for
research and design processes. In short, Aboriginal peoples must be afforded the
same opportunity which is often taken for granted outside this context – to design,
build and live in homes that reflect their identity, values, needs and interests.
Anything less is socially unsustainable, and will perpetuate housing failures that
have persisted for decades. There is marked potential for emerging green building
methods and clean technologies to contribute such a reality. Simultaneously,
culture must play a central role in defining the Aboriginal housing of the future.
68
Recommendations for Aboriginal Housing Design
Establish a formal body of community representatives prior to initiating
design, to provide meaningful input in project decision-making;
Foster relationship-building between stakeholders, with consideration for
historical and cultural factors specific to the community in question
(sensitivities, traditions, protocols surrounding knowledge transfer,
validation, interpretation, and organizational and sociopolitical structures);
Assess local demographics, needs, and logistical considerations
(e.g. supply chains, climatic conditions);
Clearly communicate objectives and options between all stakeholders,
including perceived benefits, risks, and special considerations (such as
labour, scheduling and maintenance requirements);
Align solutions with existing or potential community capacity (where this is
a challenge, alignment may be fostered through modest objectives and/or
grounding strategies in proven methods and technologies);
Adhere to contemporary building performance standards and material
specifications;
Explore strategies to promote a sense of, and actual, legal home
ownership;
Foster self-construction models in order to build capacity, formally track
and assess related outcomes;
Allocate resources and plan for follow-up between stakeholders, including
post-occupancy evaluation, comprehensive auditing; and
Engage 3rd
parties to assess success relative to initial objectives, use to
inform dialog on best practices.
69
Recommendations for Aboriginal Housing Policy
Provide clear criteria and guidelines for competitiveness and qualification;
Allow for flexibility of timelines to improve design processes and
outcomes, and avoid logistical challenges associated with
seasons/climate;
Allow for modification of objectives and strategies during design and
implementation phases, where sufficient need can be demonstrated;
Allow increases in initial capital investment specific to key issues such as
health, safety, durability, flexibility and appropriateness;
Allow increases in initial capital investment where long-term benefits can
be quantified;
Avoid bias towards specific housing occupancy rates, and respond to
actual needs;
Dedicate funding for capacity building in housing management and home
inspections, incentivize attendance, commitment to employment, and
third-party tracking of outcomes;
Dedicate funding for different levels and types of initiatives, including
both minor and major renovations and new construction;
Shift responsibility for assessing adequacy away from occupants;
Develop measures for affordability on reserve lands and improve these in
rural contexts;
Dedicate funding for proven ownership models such as rent-to-own
programs and revolving loan funds;
Dedicate infrastructure and site development funding independent of
housing;
Identify synergies between outcomes of green building, clean
technologies and mandates in other sectors such as climate change and
environmental protection, and use these to leverage increased funding;
Provide special measures to alleviate and avoid housing related debt,
including but not limited to reduced interest rates;
70
Support strategies for keeping economic resources within the community;
and
Promote housing related education in Aboriginal communities, explore
different methods for cultural appropriateness and effectiveness; address
general and specific maintenance issues, and broader housing market
function (mortgages, rent, impact of arrears on Band capacity to service);
track and assess outcomes, and develop best practices.
71
Acknowledgements
Firstly I would like to extend thanks to the Seabird Island First Nation, the
Saugeen First Nation, and the Treaty 7 First Nations, and specifically to all of the
individuals from within these communities who made this research possible. I
sincerely hope that the research herein is of benefit to you, and to other
Aboriginal communities who face similar challenges. Secondly I would like to
thank my wife Jessica, and my family and friends for their patience and support. I
would also like to acknowledge the support of Dr. Michael Buzzelli of the
Canadian Policy Network at the University of Western Ontario, my field mentor
Keir Brownstone, and my thesis research supervisor Dr. Larissa Muller in the
Faculty of Environmental Design, at the University of Calgary. Last but not least,
thanks to Margie Carlson and the Housing Services Corporation for providing the
resources needed to pursue research in this important area.
72
Bibliography
Alcantara, Christopher: 2005. Certificates of Possession and First Nations Housing: A Case Study of the Six Nations Housing Program, in Canadian Journal of Law and Society, Vol. 20, Issue 2, pp. 183-206.
Assembly of First Nations: 2006. The Royal Commission on Aboriginal Peoples at 10 Years: A Report Card. Available: http://www.cbc.ca/news/background/aboriginals/pdf/afn_rcap.pdf. Accessed: November 2011.
Battiste, Marie and Youngblood Henderson, James: 2000. Protecting Indigenous Knowledge and Heritage. Purich Publishing Ltd.: Saskatoon.
Beavon, D.:2009. The Well Being of Indigenous Peoples: Statistics, Knowledge and Policy: Understanding Societal Change. Available:
http://www.oecd.org/dataoecd/18/36/42887326.pdf. Accessed: January 2011.
Berkes, Fikret: a) 1993. Traditional Ecological Knowledge in Perspective. Traditional Ecological Knowledge: Concepts and Cases. Inglis, Julian (Ed.). International Development
Research Centre: Ottawa. b) 1999. Sacred Ecology: Traditional Ecological Knowledge and Resource Management. Taylor and Francis: Philadelphia.
Blengini, G.A.: 2009. Life Cycle of Buildings, Demolition, and Recycling Potential: A Case Study in Turin, Italy. Building and Environment, 44, 319-330.
Brockman, Aggie: 1997. “When All People Have the Same Story, Humans Will Cease to Exist.” Protecting and Conserving Traditional Knowledge: A Report for the Biodiversity Conventions Office. Churchill: Dene Cultural Institute.
Canada Mortgage and Housing Corporation: a) 1994. Research House for the Environmentally Hypersensitive: Description and Technical Details. Available: http://www.cmhc-schl.gc.ca/en/inpr/bude/heho/heho_001.cfm. Accessed: June 2011.
b) 2002. Special Studies on 1996 Census Data: Housing Conditions of North American Indian, Métis and Inuit Households in Canada. Available: https://www03.cmhc-schl.gc.ca/catalog/productDetail.cfm?cat=33&itm=4&lang=en&fr=1308071074578. Accessed: June 2011.
c) 2003. Housing Needs of Low-Income People Living in Rural Areas. Available: https://www03.cmhc-schl.gc.ca/catalog/productDetail.cfm?cat=32&itm=19&lang=en&fr=1308858244130 Accessed: June 2011.
d) 2007. Fire Prevention in Aboriginal Communities - Manual. Available: www03.cmhc-schl.gc.ca/catalog/productDetail.cfm?cat=123&itm=71&lang=en&fr=1295022307078. Accessed: January 2011.
e) 2010. Overview of the Current State of Knowledge on Societal Outcomes of Housing. Available: https://www03.cmhc-schl.gc.ca/catalog/productDetail.cfm?cat=164&itm=1&lang=en&fr=1308854008546 Accessed: June 2011.
f) No date (online). A Better Way to Renovate. Available: http://www.cmhc-schl.gc.ca/en/inpr/bude/heho/beware/index.cfm. Accessed: November 2011.
g) Rousseau, D., Bowser, D. and Mattock, C.: 2001. A Guide to Mechanical Equipment for Healthy Indoor Environments. Available: https://www03.cmhc-schl.gc.ca/catalog/productDetail.cfm?cat=123&itm=34&lang=en&fr=1321240517125. Accessed: November 2011.
73
Canadian Real Estate Association (CREA), International Housing Coalition (IHC): 2006. Aboriginal Housing in Canada: Building on Promising Practices. Available: http://www.intlhc.org/wuf/Aboriginal_housing_canada.pdf. Accessed: January 2011.
Castellano, M.B., Archibald, L. and DeGagné, M.: 2008. From Truth to Reconciliation: Transforming the Legacy of Residential Schools. Dollco Printing: Ottawa.
Chamberlain, J. Edward: 2004. If This Is Your Land, Where Are Your Stories? Vintage Canada: Toronto.
Croal, Peter: 2010. Indigenous Peoples – Vital Partners in Development. Presentation hosted by the International Association of Impact Assessment. November 9, 2010, Calgary. Available: http://www.iaia.org/conferences/iaia11/proceedings/presentations/IAIA%2011%20Indigenous%20Peoples%20and%20petroleum%202.pdf. Accessed November 2011.
Crowshoe, R. et al. (Canadian Heritage Advisory Group): a) 2010. Destinations: The National Gatherings on Aboriginal Cultures and Tourism Final Report. Available: http://www.pch.gc.ca/eng/1288012608469. Accessed:
January 2011. b) 2010. Indigenous Knowledge: Place, People and Protocol. Available: http://www.pch.gc.ca/eng/1288012803946. Accessed: January 2011.
CTV News Staff: 2009. Dozens of Aboriginal Languages Near Death: UNESCO.
Available: http://www.ctv.ca/CTVNews/Canada/20091106/dying_languages_091108/. Accessed: November 2011.
Curry, B.:2010. Aboriginals in Canada face ‘Third-World’-level risk of Tuberculosis. Toronto: Globe and Mail, 10 March 2010.
Dalla Costa, Wanda: no date (unpublished). An Emerging Narrative: Aboriginal Contributions to Canadian Architecture.
Dobie, A. and Sieniuc, R.: 2003. Integration and Innovation: The Seabird Island Project. Journal of the Architectural Institute of British Columbia, vol.10, pp.14-20.
Dorst, K.: 2004. The Problem of Design Problems: Problem Solving and Design Expertise. Journal of Design Research, vol.4 (2).
Dorst, Kees and Cross, Nigel: 2001. Creativity in the Design Process: Co-Evolution of Problem-Solution. Design Studies, vol.22(5), pp.425-437.
Epp, Roger: 2008. We Are All Treaty People. Houghton Boston Printers: Saskatchewan.
Fathy, Hassan: 1986. Natural Energy and Vernacular Architecture. University of Chicago Press: Chicago, IL.
Feit, Harvey: 1995. ‘Hunting and the Quest for Power’ in Native Peoples: The Canadian Experience, 2
nd Edition. Eds. Morrison, B. and Wilson, C.R. McClelland and Stewart
Inc.: Toronto.
Fenwick, Fred: 2007. Human right, treaty right… or just something that has to be paid for? LawNow, Vol.31, no.6, p.58.
Flanagan, T., Alcantara, C. and Le Dressay, A.: 2010. Beyond The Indian Act: Restoring Aboriginal Property Rights. McGill-Queens University Press: London.
Health Canada: 2005. First Nations Comparable Health Indicators. Available: http://www.hc-sc.gc.ca/fniah-spnia/diseases-maladies/2005-01_health-sante_indicat-eng.php. Accessed: January 2011.
Health Canada: 2009. A Statistical Profile on the Health of First Nations in Canada: Self-Rated Health and Selected Conditions, 2002-2005. Available: http://www.hc-sc.gc.ca/fniah-spnia/pubs/aborig-autoch/2009-stats-profil-vol3/index-eng.php. Accessed: January 2011.
Highway, Tomson: 1998. Kiss of the Fur Queen. Doubleday Canada: Toronto.
74
Indian and Northern Affairs Canada: a) 2004. Measuring First Nations Well-Being. Available: http://dsp-psd.pwgsc.gc.ca/Collection/R2-348-2004E.pdf. Accessed: Jan 2011. b) 2010. Sharing Knowledge For a Better Future: Adaptation and Clean Energy Experiences in a Changing Climate. Available: http://www.ainc-inac.gc.ca/enr/clc/cen/pubs/fbf/fbf-eng.asp. Accessed: June 2011.
Kennedy, B.: 2004. Seabird Island First Nation Sustainable Community Development.
Available: http://www.turtleisland.org/discussion/viewtopic.php?p=2705. Accessed January 2011.
King, Thomas: a) 1993. Green Grass Running Water. HarperCollins Publishers Canada: Toronto.
b) 2003. The Truth About Stories: A Native Narrative. House of Anansi Press: Toronto.
Lertzman, David:
a) 2003. Caveat on Consilience: Barriers and Bridges for Traditional Knowledge and Conservation Science. Washington DC: Island Press.
b) 2010. Best of two worlds: Traditional ecological knowledge and Western science in ecosystem-based management. BC Journal of Ecosystems and Management, vol.10(3), pp.104–126. Available: www.forrex.org/publications/jem/ISS52/vol10_no3_art10.pdf. Accessed: November 2011.
Lertzman, David and Vredenburg, Harrie: 2005. Indigenous Peoples, Resource Extraction and Sustainable Development: An Ethical Approach. Journal of Business Ethics,
v56, pp239-254.
Loxley, John: 2010. Aboriginal, Northern, and Community Economic Development: Papers and Retrospectives. Arbeiter Ring Publishing: Winnipeg.
MacMillan, H. and MacMillan, A. and Offord, D. and Dingle, J.: 1996. Aboriginal Health. Canadian Medical Association, vol.155 (11). Pp.1569-1578
Maliene, V. Howe, J. and Malys, N. (2008). Sustainable Communities: Affordable Housing and Socio-economic Relations. Local Economy. Vol. 23 (4), pp.267-276.
McDonough, W and Braungart, M.: 2002. Cradle to Cradle: Remaking the Way We Make Things. North Point Press: New York.
Meissner, D.: 2009. Fire tragedy on reserve prompts calls for better native housing conditions. Globe and Mail: Toronto. 16th January 2009.
Memmott, P.: 2008. Delivering Culturally Appropriate Sustainable Housing. Architecture Australia, vol. 97 (5), pp.61-64.
McGregor, D.: 2008. Linking Traditional Ecological Knowledge and Western Science: Aboriginal Perspectives from the 2000 States of the Lakes Ecosystem Conference. The Canadian Journal of Native Studies XXVIII (1), pp.139-158.
Morrison, R.B. and Wilson, C.R. (Eds): 1995. Native Peoples: The Canadian Experience.
McLelland and Stewart Inc.: Toronto.
Proscio, T.: 2008. Sustainable, Affordable, Doable. Available: http://www.practitionerresources.org/cache/documents/666/66601.pdf. Accessed: January 2011.
Ramsay, Joan. Reaching out to the marginalized. Globe and Mail: Toronto, 29th Nov 2010.
Real Estate Foundation of British Columbia: 2007. Review of Best Practices in Affordable Housing. Available: http://www.bimbc.ca/files/embedded/SGBC_Affordable_Housing_Report_2007.pdf. Accessed: January 2011.
Reilly, John: 2010. Bad Medicine: A Judge’s Struggle for Justice in a First Nations Community. Rocky Mountain Books: Calgary.
75
Robson, R.: 2008. Suffering an Excessive Burden: Housing as a Health Determinant in the First Nations Community Northwestern Ontario. The Canadian Journal of Native Studies, vol.28 (1), pp.71-87.
Rosenberg, T. et. al.: 1997. Shigellosis on Indian Reserves in Manitoba, Canada: Its Relationship to Crowded Housing, Lack of Running Water, and Inadequate Sewage Disposal. American Journal of Public Health, vol 87 (9), pp.1547-1551.
Royal Commission on Aboriginal Peoples: 1996. People to People, Nation to Nation: Highlights from the Report of the Royal Commission on Aboriginal Peoples. Communication Group Publishing: Ottawa.
Saskatchewan Indian: 1972. 176 Deaths from Fire. Available: http://www.sicc.sk.ca/saskindian/a72nov04.htm. Accessed: January 2011.
Saul, John Ralston: 2009. A Fair Country: Telling Truths About Canada. Penguin Canada: Toronto.
Shaw, K., Stephenson, P. and Optis, M.: no date (unpublished). Haisla Housing Study. University of Victoria.
Smith, Linda Tuhiwai:1999. Decolonizing Methodologies: Research and Indigenous Peoples. Zed Books Ltd.: New York.
Status Report of the Auditor General: a) 2003, May. Chapter 6: Federal Government Support to First Nations Housing on Reserves. Available: http://www.oag-bvg.gc.ca/internet/English/parl_oag_200304_06_e_12912.html. Accessed: November 2011. b) 2011, June. Chapter 4: Programs for First Nations on Reserves. Available: http://www.oag-bvg.gc.ca/internet/English/parl_oag_201106_04_e_35372.html#hd5a. Accessed: June 2011.
Thormark, C.: a) 2002. A Low Energy Building in a Life Cycle – Its Embodied Energy, Energy Need for Operation and Recycling Potential. Building and Environment, vol.37, pp.429-435.
b) 2006. The Effect of Material Choice on the Total Building Energy Need and Recycling Potential of a Building. Building and Environment, vol.41, pp.1019-1026.
Tookenay, V.: 1996. Improving the Health Status of Aboriginal People in Canada: New Directions, New Responsibilities. Canadian Medical Association, vol.155 (11), pp.1581-1583.
United Nations: 1987. Our Common Future. Available: http://www.un-documents.net/ocf-
02.htm#I. Accessed June 2011.
United States Government Accountability Office: 2008. Green Affordable Housing. Available: http://www.gao.gov/new.items/d0946.pdf. Accessed: January 2011.
Vaillant, John: 2006. The Golden Spruce. Vintage Canada: Toronto.
Wake, Tim: 2007. Review of Best Practices in Affordable Housing. Available: http://www.bimbc.ca/files/embedded/SGBC_Affordable_Housing_Report_2007.pdf. Accessed: June 2011.
Wilson, Angela and Yellow Bird, Michael: 2005. For Indigenous Eyes Only: A Decolonization Handbook. School of American Research Press: Santa Fe, NM.
Younging, G., Dewar, J. and DeGagné, M.: 2009. Response, Responsibility, and Renewal: Canada’s Truth and Reconciliation Journey. Dollco Printing: Ottawa.