linear Construction One piece die-formed 20 ga. C.R.S. 1’x4’ or 1’x8’ reflector/ housing. Detachable die formed perforated lamp shield is 22 ga. C.R.S. with white acrylic lens insert. Die-cast aluminum end caps complete shield assembly. For row installa- tion, internal brackets join fixtures forming hairline joint. 4' unit weight: 19 lbs. 8' unit weight: 38lbs. Optic Integrally welded one piece 20 ga. C.R.S. reflector, finished in matte satin white powder coat. Lamp shield is detachable, perforated basket assembly of die formed 22 ga. C.R.S. and white acrylic insert. Electrical Fixtures are prewired for specified circuits, with thermally protected Class “P” electronic ballasts. T8 Lamps: Electronic instant start 265ma, <20% THD or optional electronic program start 265ma, <10% THD T5 Lamps: Electronic program start 160ma, <10% THD T5HO Lamps: Electronic program start 160ma, <10% THD Optional DALI and other dimming ballasts available. Consult factory for specifications and availability. UL and cUL listed. Emergency Emergency battery packs provide 90 minutes of illumination. Initial lumen output for lamp types are as follows: T8 Lamps: Up to 550 lumens T5 Lamps: Up to 550 lumens T5HO Lamps: Up to 825 lumens Battery pack requires unswitched hot from same branch circuit as AC ballast. Finish Fixture housing, reflector and all steel components are finished in polyester powder coat applied over a 5-stage pretreatment. Standard finish for housing and all steel components: matte satin white (min. 94% reflectance). SOFTLITE IV FS4S Sept 2003 • Suspended versions of Softlite offer direct distribution with a new aesthetic. • Two-piece endcaps provide row- mount capability for all configura- tions of Softlite. • Basket assembly retained by self-aligning torsion springs pulls down for easy relamping. • Lamps are shielded by a perforated basket to provide soft downlight component. • See Linear and Sconce sections for companion luminaires. Suspended 1’x4’ or 1’x8’ direct luminaire with matte satin white reflector and perforated lamp shield 1,2 & 3 Lamp T8 6.38" 162.1mm 6.25" 158.8mm 11.79" 299.5mm Features Suspended 1,2 & 3 Lamp T5 & T5HO RLP Row Mount
2
Embed
Suspended SOFTLITE IV - focalpointlights.com · 4' unit weight: 19 lbs. 8' unit weight: 38lbs. Optic Integrally welded one piece 20 ga. C.R.S. reflector, finished in matte satin white
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
linear
ConstructionOne piece die-formed 20 ga. C.R.S.1’x4’ or 1’x8’ reflector/ housing.Detachable die formed perforatedlamp shield is 22 ga. C.R.S. withwhite acrylic lens insert. Die-castaluminum end caps completeshield assembly. For row installa-tion, internal brackets join fixturesforming hairline joint.
4' unit weight: 19 lbs.8' unit weight: 38lbs.
OpticIntegrally welded one piece 20 ga.C.R.S. reflector, finished in mattesatin white powder coat. Lampshield is detachable, perforatedbasket assembly of die formed 22ga. C.R.S. and white acrylic insert.
ElectricalFixtures are prewired for specifiedcircuits, with thermally protectedClass “P” electronic ballasts.
• Lamps are shielded by a perforatedbasket to provide soft downlightcomponent.
• See Linear and Sconce sections forcompanion luminaires.
Suspended 1’x4’ or 1’x8’ directluminaire with matte satinwhite reflector and perforatedlamp shield
1,2 & 3 Lamp T8
6.38"162.1mm
6.25"158.8mm
11.79"299.5mm
Features
Suspended
1,2 & 3 Lamp T5 & T5HO
RLP
Row Mount
Sept 2003Focal Point L.L.C. reserves the right to change specifications for product im
provement w
ithout notification.
FOCAL POINT L.L.C. 4201 South Pulaski Rd, Chicago, Illinois 60632 USA T 1.773.247.9494 F 1.773.247.8484 E-MAIL [email protected] WEBSITE www.focalpointlights.com
Consult www.focalpointlights.comfor additional photometric reports and