Surface Texture Measuring Instruments Compact & Touch operetion type SURFCOM Series
Surface Texture Measuring Instruments
Compact & Touch operetion typeSURFCOM Series
2
Supported Languages English, Japanese,
German, French, Italian, Spanish and Chinese!
JIS2001 compliant!
Simplified automatic 16% rule application
SURFCOM 480B-12
Operator-oriented Operation for the WorkplaceNew Surface Texture Measuring Instrument for Easy Operation
Surface Texture Measuring Instrument
TFT Color LCD Touch Panel Supports International StandardsThe color LCD touch panel with a wide field of view features high clarity. Simply touch the desired icon to perform operation. Touch panel input can be performed by using your finger or with the touch-pen provided, facilitating on-site measurements.
The customize function can be used to create a special menu where only the icons that are used most frequently are displayed, substantially enhancing operational efficiency.
The unit incorporates 34 types of roughness parameters (Ra, Rz, Ry, Sm, S, tp, etc.) and 32 types of waviness parameters. The steps on electrical parts, film thickness, surface area and other items can be analyzed.
The AI (artificial intelligence) function automatically selects the ideal cut-off value, measuring range and other conditions by simply entering the parameters and allowable values denoted on the machining drawing. This automates measurement.
Six types of automatic tilt correction are provided: Linear, first half,latter half, both end, round surface and spline curve (patented).
This function guides the user through the measuring procedures, enabling beginners to make measurements.
The waveform on the screen is enclosed by two cursors, allowing the desired evaluation range to be set and the parameters to be calculated.
Customize Icons Host of Analysis Functions
AI Function (patented) Tilt Correction Function
Guidance FunctionEvaluation Range Setting (patented)
A short note or diagram can be entered with the touch pen and printed using the memo function.
Memo Function Measuring conditions, measured result management or measured data can be output in binary and text format. This data can be easily read from the PC card slot on a personal computer. Storage of data on CF cards and other types of memory cards is possible to use.
PC Card Slot
The 480A supports analysis parameters for JIS (2001/1994/1982), ISO, DIN, ASME and CNOMO standards, and can be switched between English, Japanese, German, Italian, French, Spanish and Chinese. In addition, any power source between AC100V and 240V can be used, and the unit satis-fies the European Directives for the CE Marking.
Model SURFCOM 480B
Measuring RangeX-axis (horizontal) 100mmZ-axis (vertical) 800μm (Measuring range/resolution: 800μm/10nm, 80μm/1nm, 8μm/0.1nm)
Straightness accuracy (0.05 + 1.5L/1000) μm L: Measuring length (mm)
Analysis items
Conformance Complies with JIS-2001, JIS-1994, JIS-1982, ISO-1997, ISO-1984, DIN-1990, ASME-1995, CNOMO
ParametersRa, Rq, Ry, Rp, Rv, Rc, Rz, Rmax, Rt, Rz.J, R3z, Sm, S, R Δa, R Δq, R λa, R λq,TILT A, Ir, Pc, Rsk, Rku, Rk, Rpk, Rvk, Mr1, Mr2, VO, K, tp, Rmr, tp2, Rmr2, R δc,AVH, Hmax, Hmin, AREA, NCRX, R, Rx, AR, NR, CPM, SR, SAR
Evaluation curvesSection profi le curve, roughness curve, fi ltered waviness curve, fi ltered center line waviness curve, rolling circle waviness curve,rolling circle center line waviness curve, DIN4776 special curve, roughness motif curve, waviness motif curve, envelope waviness curve
Surface Characteristics graphs Bearing area curve, amplitude distribution (ADF) curve, power graph
Tilt correctionLinear correction, round surface correction, fi rst half correction, latter half correction, both end correction,spline correction (linear, round surface, and both end correction are supported in an arbitrary range)
Vertical (Z-axis) 50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K, 200K,* 500K,* autoHorizontal (X-axis) 1, 2, 5, 10, 20, 50, 100, 200, 500, 1K, 2K, auto
Filter types Standard fi lter (2RC), phase compensation fi lter (2RC), phase compensation fi lter (Gaussian)Measuring Speed 0.03, 0.06, 0.15, 0.30, 0.60, 1.5, 3, 6mm/s (8 speeds)Detector Tip radius: 2μm, Material: Diamond, Measuring force: 0.75mN
Special functionsMeasuring AI AI functions provide for easy procedures, enabling beginners to make measurements.Step analysis function Ideal for fi lm thickness and surface area measurement of semiconductor parts.PC card Data output as text fi le for transfer to a personal computer.
Standard accessories Standard specimen (E-MC-S24B), recording paper (E-CH-S21A), touch pen (E-MA-S54A), instruction manual
Dimensions andweight
Power Source AC100–240V ±10%, 50/60Hz, 90VAInstallation dimensions 1000 (W)×800 (D)×750 (H)mmWeight 88kg (for SURFCOM 480B-12)
3
*When high-magnifi cation pickup is used
Surface Texture Measuring Instrument
■Sample Display
The customize function on the menu allows icons to be edited and arranged as desired.
■ Sample data sheet
■ Main Menu
■ Sample Customized Screens
■ Analysis Results
Load curve
Amplitude distributioncurve
Power graph
4
LCD Panel Simplifies Operation
Highly Portable Compact Unit
Supports International StandardAnalysis Parameters
● Simply select the desired operation from the color LCD touch panel with a wide field of view or the reasonable monochrome LCD.
The customize function can be used to create a special menu where only the icons that are used most frequently are displayed, substantially enhancing operational efficiency.
The unit incorporates 34 types of roughness parameters (Ra, Rz, Ry, Sm, S, tp, etc.) and 32 types of waviness parameters. The steps on electrical parts, film thickness, surface area and other items can be analyzed.
The AI (artificial intelligence) function automatically selects the ideal cut-off value, measuring range and other conditions by simply entering the parameters and allowable values denoted on the machining drawing. This automates measurement.
Six types of automatic tilt correction are provided: Linear, first half, latter half, both end, round surface and spline curve (patented).
This function guides the user through the measuring procedures, enabling beginners to make measurements.
The waveform on the screen is enclosed by two cursors, allowing the desired evaluation range to be set and the parameters to be calculated.
Customize Icons Host of Analysis Functions
AI Function (patented) Tilt Correction Function
Guidance FunctionEvaluation Range Setting (patented)
A short note or diagram can be entered with the touch pen and printed using the memo function.
Memo Function Measuring conditions, measured result management or measured data can be output in binary and text format. This data can be easily read from the PC card slot on a personal computer. Storage of data on CF cards and other types of memory cards is possible to use.
PC Card Slot
Monochrome LCD
TFT color LCD
Supported Languages
English, Japanese, German, French, Italian,
Spanish and Chinese!
Best of Class Straightness Accuracy
0.3 μ m/50mm !!
Simplified 16% rule
automatic discrimination
Operator-oriented Operation for the WorkplaceCompact Field Surface Measuring Instrument
● Select the desired standard: JIS, ISO, DIN, ASME or CNOMO.
Satisfies European Directives for CE Marking
● The unit is small enough for use at virtually any location.
Surface Texture Measuring Instrument
5
■Convenient Mode Select Function for System Manager/Operator
Supported Languages
English, Japanese, German, French, Italian,
Spanish and Chinese!
All functions are displayed forthe system manager.
■Flexible Data Analysis
Only required functions are displayed for the operator.
CustomizedscreenAll-function screen
RS-232C(E-SC-S288A)
PC card(E-MU-S50C)
NOTE PC
Desktop computer
■Sample Data Sheet
■ Outstanding Analysis Functions
● Step Profile Evaluation ● R-Surface Correction
【Example Measurement】Hybrid IC
【Example Measurement】Shaft
Can be used for hybrid IC, magnetic head, and other step measurement, film measurement, and surface area measurement.
A notched workpiece measuring function makes it possible to eliminated unused parted.
Measurement
points
PC card(E-MU-S50C)及びPC接続用RS-232Cケーブル(E-SC-S288A)はオプションです。
5.08 5.08 5.08
Surface Texture Measuring Instrument
integrated measuring system
Analysis withACCRETECH’s
Display in
Model SURFCOM 130A
Measuring RangeX-axis (horizontal) 50mmZ-axis (vertical) 800μm (Measuring range/resolution: 800μm/10nm, 80μm/1nm, 8μm/0.1nm)
Straightness accuracy 0.3μm/50mm
Analysis items
Standards Complies with JIS-2001, JIS-1994, JIS-1982, ISO-1997, ISO-1984, DIN-1990, ASME-1995, CNOMO
ParametersRa, Rq, Ry, Rp, Rv, Rc, Rz, Rmax, Rt, Rz.J, R3z, Sm, S, R Δa, RΔq, Rλa, Rλq,TILT A, Ir, Pc, Rsk, Rku, Rk, Rpk, Rvk, Mr1, Mr2, VO, K, tp, Rmr, tp2, Rmr2, Rδc,AVH, Hmax, Hmin, AREA, NCRX, R, Rx, AR, NR, CPM, SR, SAR
Evaluation curvesSection profi le curve, roughness curve, fi ltered waviness curve, fi ltered center line waviness curve, rolling circle waviness curve,rolling circle center line waviness curve, DIN4776 special curve, roughness motif curve, waviness motif curve, envelope waviness curve
Surface Characteristics graphs Bearing area curve, amplitude distribution (ADF) curve, power graph
Tilt correctionLinear correction, round surface correction, fi rst half correction, latter half correction, both end correction,spline curve correction (linear, round surface, and both end correction possible at arbitrary range)
Vertical (Z-axis) 50, 100, 200, 500, 1K, 2K, 5K, 10K, 20K, 50K, 100K autoHorizontal (X-axis) 1, 2, 5, 10, 20, 50, 100, 200, 500, 1K, 2K, 5K, auto
Filter types Standard fi lter (2RC), phase compensation fi lter (2RC), phase compensation fi lter (Gaussian)Measuring Speed 0.3, 0.6, 1.5, 3mm/s (4 speeds)Detector Tip radius: 2μm, Material: Diamond, Measuring force: 0.75mN
Special functionsAI Function AI functions provides for easy procedures, enabling beginners to make measurements.Step analysis Ideal for fi lm thickness and surface area measurement of semiconductor parts.PC card Data output as text fi le for transfer to a personal computer.
Standard accessories Standard specimen (E-MC-S24B), recording paper (E-CH-S21A), touch pen (E-MA-S54A), instruction manual
Dimensions andweight
Power Source AC100–240V ±10%, 50/60Hz, 30VAInstallation dimensions 700 (W) ×300 (D) ×150 (H) mmWeight 8kg
6
Roll FootE-MA-S62AAttachment for placing the drive unit on a roll shaped object for measurementRoll outer diameter: φ60 mm or more
Battery Option SetE-MA-S65AF o r m e a s u r i n g a n d r e c o r d i n g i n a location where there is no power outlet available.I n c l u d e d i t e m s : A C a d a p t o r, b a t t e r y, charger
PC cardE-MU-S50CProvides storage for approximately 500 measurement conditions, or approximately 500 data measurements (100 text management items).Specifications: 64 MB
Compact Measuring StandE-ST-S130AThe height and inclination of the drive unit can be adjusted in accordance with the size and shape of the object being measured.Table size: 410x200mmMaximum measuring height: 200mm
Pickup Holder for All-OrientationsE-DH-S107AFor measuring surface roughness of slanted surfaces, vertical surfaces, ceiling surfaces, and other non-flat surfaces.Photograph shows unit with E-MA-S63A roll foot.
Pickup Holder for Horizontal TracingE-DH-S17AAttachment for horizontal tracing of items, such as a crankshaft, that have obstacles in the front and back in the measuring direction(using double-side straddling skid)
■ Options
7
TiMS has achievements at many users. It provides various function and complicated analysis
Newly developed ACCTee software is new generation of integrated software with new concept. It provide complicated analysis with comfortable operation.
・Data save to files
・ Allows analysis of measured data to be performed on-site. Computer-based operation allows sharing of data with other computers.
・Data Transfer using an RS-232C interface (S130A, S480B, E35A) or PC card (S130A, S480B).
Able to use PC based analysis softwareTiMS Light Offline ACCTee
・ Any parameter value obtained as measured results can be transferred via RS-232C data communication in real time to a cell in Microsoft Excel running on a computer connected to the S130A/S480B or HANDY SURF.(Waveform data cannot be transferred.)
・Also effective for collecting data from multiple workpieces.
■TESCHART − Excel Converter
S130A/S480B
RS232Ccable
Computer
TESCHART-Excel Converter
TiMS Light orOnline ACCTeeS130A
HandySurf
RS232C cable (E-SC-S288A)
RS232C cable (E-SC-S366A)
PC card (E-MU-S50C), PC Connection RS-232C cable (E-SC-S288A/S366A) are optional
S480B
Desktop computer
PC card(E-MU-S50C)
TiMS analysis display TiMS print display ACCTee analysis&print display
Head Office 2968-2, Ishikawa-machi, Hachioji-city,Tokyo 192-8515, Japan TEL.81(42)642-1701 FAX.81(42)642-1821International Marketing Dept. 4, Higashi-Nakanuki-cho,Tsuchiura-city, Ibaraki 300-0006, Japan TEL.81(29)831-1240 FAX.81(29)831-6676
•We reserve the right to change the contents of this catalog, including product specifications, without notice when products are updated.
•ISO 9001 and ISO14001 awarded to the Hachioji and Tsuchiura Plants B-83-533-E-1012_1
http://www.accretech.jp