Form no: ZESB094000 Australia 1300 566 287 | komatsu.com.au Komatsu Mining 1300 367 569 | mining.komatsu New Zealand 0800 566 2878 | komatsu.co.nz New Caledonia 43 53 06 Surface Mining Product Guide 2650CX Payload of 59 mt Bucket capacity 31.1 m 3 ELECTRIC ROPE SHOVELS DUMP TRUCKS WHEEL DOZERS MOTOR GRADER HYDRAULIC EXCAVATORS DOZERS WHEEL LOADERS HYBRID SHOVEL SURFACE MINING SFB-29 Up to 2,000 tonnes (2,200 tons) p/h, Pick force up to 150,000 lbs. SFB-38 Up to 4,000 tonnes (4,400 tons) p/h, Pick force up to 350,000 lbs SFB-40 Up to 3,000 tonnes (3,300 tons) p/h, Pick force up to 300,000 lbs SFB-41 Up to 2,500 tonnes (2,750 tons) p/h, Pick force up to 200,000 lbs SFB-42 Up to 4,000 tonnes (4,400 tons) p/h, Pick force up to 200,000 lbs SFB-43 Up to 5,000 tonnes (5,500 tons) p/h Pick force up to 350,000 lbs SFB-44 Up to 5,000 tonnes (5,500 tons) p/h Pick force up to 300,000 lbs FEEDER-BREAKERS ELECTRIC WHEEL LOADERS DRAGLINES CONVEYOR PULLEYS 44XT Pull Down Force 4,538kgs 77XR Maximum bit loading 34,925 kg 44XT L-1350 40,823 kg (90,000 lbs.) operating capacity Payload ratings ranging from 200 to 260 tons L-1850 54,431 kg (120,000 lbs.) operating capacity Payload ratings ranging from 240 to 360 tons L-2350 72,574 kg (160,000 lbs.) operating capacity Payload ratings ranging from 320 to 400+ tons SOFT ROCK HARD ROCK CONSTRUCTION & UTILITY, QUARRY SURFACE & OVERLAND CONVEYOR SYSTEMS & TERMINALS Winch 2800XPC Payload of 59 mt Dipper capacity of 26.8 to 33.6 m 3 4100C Payload of 81.6 mt Dipper capacity of 45.9 m 3 4100CBOSS Payload of 90.7 mt Dipper capacity of 44.3 m 3 4100XPC Payload of 108.9 mt Dipper capacity of 52.8 to 61.2 m 3 4100XPC-AC-90 Payload of 73 to 82 mt Dipper capacity of 42 to 49 m 3 4800XPC Payload of 122.5 mt Dipper capacity of 65.7 to 70.3 m 3 D375A-8 FH 610 HP (455 kW) WT 72 tonnes D475A-5E0 664 kW / 890 HP WT 110 tonnes D475ASD-5E0 664 kW / 890 HP WT 116 tonnes PC1250SP-8R WT 110.0 tonnes PC2000-8 WT 195 - 204 tonnes PC3000-6 WT 252 - 265 tonnes PC4000-11 WT 388 - 399 tonnes PC5500-6 WT 533 - 552 tonnes PC8000-6 WT 752 - 777 tonnes PC7000-11 WT 677 - 691 tonnes ALL Available in BACKHOE or FRONT SHOVEL configuration WA800-3E0 603 kW / 808 HP CAP 10.0 - 14.0 m³ WA900-3E0 638 kW / 856 HP CAP 11.5 - 13.0 m³ WA1200-6 1,316 kW / 1,765 HP CAP 18.0 - 35.0 m³ HD785-7 895 kW / 1,200 HP MPL 91 tonnes (100 tons) HD1500-8 1,175 kW / 1,576 HP MPL 142 tonnes (156 tons) 730E-8 1,492 kW / 2,000 HP MPL 181 tonnes (200 tons) 830E-5 1,865 kW / 2,500 HP MPL 235 tonnes (259 tons) 930E-5 2,014 kW / 2,700 HP MPL 304 tonnes (335 tons) 930E-4SE 2,610 kW / 3,500 HP MPL 290 tonnes (320 tons) 980E-5 2,610kW / 3,500 HP MPL 363 tonnes (400 tons) WD600-6 FH 527 HP (393 kW) WT 48.1 tonnes WD900-3 FH 853 HP (637 kW) WT 100.0 tonnes GD825A-2 FH 280 HP (209 kW) WT 29.3 tonnes Conveyor starter Winch controller Carry Return Impact Flat Garland CONVEYOR IDLERS BLASTHOLE DRILL HAC Systems 20° to 90° vertical lift Uphill or Downhill 600mm to 3200mm wide belts Gravity take-up SFB-32 Up to 3,000 tonnes (3,300 tons) p/h, Pick force up to 150,000 lbs 285XPC Maximum bit loading 53,524 kg 320XPC Maximum bit loading 68,038 kg 250XPC Maximum bit loading 40,823 kg 9010C 42 to 60 m 3 bucket capacity range 84 to 107 m boom length range 9020C 55 to 93m 3 bucket capacity range 90 to 125 m boom length range 9020XPC 85 to 122 m 3 bucket capacity range 100 to 130 m boom length range RECLAIM FEEDERS RF-5 Up to 2,000 tonnes (2,200 tons) p/hour RF-7 Up to 3,600 tonnes (4,000 tons) p/hour RF-27 Up to 2,000 tonnes (2,200 tons) p/hour Transfer Tower (JIB) Elevated conveyor Ground Modules Drive frame Impact loading station Tail frame Drive pulleys (Ceramic & FRAS Rubber lagged) Non-Drive pulleys (Ceramic & FRAS Rubber lagged) Steel roller & Aluminium roller Run Red Poly Roller Impact Roller Rubber disc return 600mm to 3200mm wide belts 600mm to 3200mm wide belts 600mm to 3200mm wide belts 600mm to 3200mm wide belts CONVEYOR IDLERS HAC SYSTEMS SIZERS iXRS/XRS 600 Up to 1800 MTPH, 0-800mm feed size 150/200 (mm) Standard Product Size XRS/DRX 800 Up to 3000 MTPH, 0-100mm feed size 150/200/250 (mm) Standard Product Size JOY DRS1000 DRX 1000 Up to 5000 MTPH, 0-1200mm feed size 200/250/300 (mm) Standard Product Size MVT-II 600 Up to 1000 MTPH @ -50mm, 0-250 (mm) feed size 25/38/50 (mm) Standard Product Size MVT-II 800 Up to 0-1800 MTPH @ -50mm, 0-350 (mm) feed size 50/100 (mm) Standard Product Size