Supply Chain Network Design · Logix Supply Chain Optimization and Distribution Network Design software and well help you set up your supply chain model. Contact [email protected]
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Contact [email protected] for a free comparison using your current distribution center locations.
___________ … _____________
LOGISTIX SOLUTIONS IS ONE OF THE LEADING PROVIDERS OF ON-DEMAND SUPPLY CHAIN OPTIMIZATION SOLUTIONS. LOGIX SOFTWARE IS USED BY FORTUNE 500 COMPANIES, THIRD PARTY LOGISTICS PROVIDERS, CONSULTANTS AND FAST-GROWING ENTERPRISES WORLDWIDE TO OPTIMIZE THEIR DISTRIBUTION NETWORKS FOR OPTIMUM PERFORMANCE, SERVICE AND COST.
Logix optimally selects the optimum combination of distribution centers from among 50 of the most widely used locations in the United States using average US based transportation rates and wages for each State. Demand data is represented by population data for all 3-Digit Zip Codes in the United States.
Single Site Solution
Winston-Salem NC
Inbound Cost: $2,910,114
Outbound Cost: $7,132,723
Warehousing Cost: $990,567
Total Cost: $11,033,404
Unique Proximity Radar View Logix pinpoints the exact optimum location with a potential for an additional reduction in cost located in Lynchburg VA. The potential reduction in cost is about 1% (indicated by 1% slightly North East of Winston-Salem NC). The red percentages show potential increase in cost in 50-mile increments.
ProLogix’ Predictive Analytics pinpoints each of your supply chain problem areas including a comparison of average vs site specific cost and service for each customer location. The transportation cost for Charlotte NC distributed from Atlanta GA is critically above average, shown in red in this example, whereas the service level, shown in green is about average.
For a free assessment of your distribution network compared to this model supply chain, contact [email protected]. Just tell us the location of your distribution centers and we’ll send you a free analysis and comparison via email. Here’s an example of what you’d receive showing a side by side comparison of your distribution network and the ‘optimum’ solution if your distribution centers are located in Indianapolis and Los Angeles.
Example of “Your Network”
Indianapolis IN and
Los Angeles, CA
Inbound Cost: $7,197,990
Outbound Cost: $18,881,696
Warehousing Cost: $2,469,988
Total Cost: $28,549,674
Two Site Optimum Solution
Lexington, KY and
Reno, NV
Inbound Cost: $7,197,052
Outbound Cost: $18,501,781
Warehousing Cost: $2,293,807
Total Cost: $27,992,640
Savings Potential: $557,034
If you’d like to add more details or make further refinements to the assessment model, download the Logix Supply Chain Optimization and Distribution Network Design software and we’ll help you set up your supply chain model.
Contact [email protected] for a free demo or for a subscription to Logix or call us at 571 426 5951. You can also visit www.logistixsolutions.com for more information.