ISO Update Supplement to ISO Focus + March 2011 People and places ISO Members 2 International Standards in process from 1 to 28 February 2011 Committee Drafts (CD) registered 3 Draft International Standards (DIS) circulated 5 Final draft International Standards (FDIS) circulated 9 Standards published 10 Standards confirmed 12 Standards withdrawn 13 Meeting calendar 13
21
Embed
Supplement to ISO Focus+ · Supplement to ISO Focus+ March 2011 People ... Draft International Standards (DIS) circulated 5 Final draft ... mination of tension set under constant
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ISO Update
Supplement to ISO Focus+
March 2011
People and places
ISO Members 2
International Standards in processfrom 1 to 28 February 2011
Committee Drafts (CD) registered 3
Draft International Standards (DIS) circulated 5
Final draft International Standards (FDIS) circulated 9
Standards published 10
Standards confirmed 12
Standards withdrawn 13
Meeting calendar 13
People and places
2 ISO Update, Supplement to ISO Focus+– March 2011
ISO Members
Since the February 2011 issue of ISO Focus+, the following changes affecting ISO members have occurred:
New CEO
Member body
NIGERIA (SON)
Director General: Dr. Joseph Ikemefuna Odumodu
ISO Update, Supplement to ISO Focus -- March 2011 3
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A fi rst important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Stand-ard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confi rmation vote is subsequently carried out on a fi nal draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 February to 28 February 2011
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 4 Rolling bearings
ISO 1206:2001/CD Amd 1
Rolling bearings — Needle roller bearings, dimension series 48, 49 and 69 — Boundary dimensions and tolerances — Amendment 1: Tolerance limits for shaft raceway and housing bore diameters
ISO 3245:2007/CD Amd 1
Rolling bearings — Needle roller bearings, drawn cup without inner ring — Boundary dimensions and tolerances — Amendment 1: Tolerance limits for shaft raceway and housing bore diameters
TC 8 Ships and marine technology
ISO/DPAS 30004
Ship recycling management systems — Guide-lines for implementing ISO 30000
ISO/CD 13073-2
Ships and marine technology — Risk assess-ment on anti-fouling systems on ships — Part 2: Marine environmental risk assessment method for anti-fouling systems on ships using biocidally active substances
ISO/CD 16165 Ships and marine technology — Marine envi-ronment protection — Terminology relating to oil spill response
ISO/CD 16304 Ships and marine technology — Marine environment protection — Arrangement and management of port waste reception facilities
ISO/CD 16855 Ships and Marine Technology — Loose gear of lifting appliances on ships — General requirements
ISO/CD 16856 Ships and Marine Technology — Loose gear of lifting appliances on ships — Hooks
ISO/CD 16857 Ships and Marine Technology — Loose gear of lifting appliances on ships — Shackles
ISO/CD 16858 Ships and Marine Technology — Loose gear of lifting appliances on ships — Pulleys
TC 22 Road vehicles
ISO/CD 6624-2 Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron
ISO/CD 6624-4 Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel
ISO/CD 6722-2 Road vehicles - 60 V and 600 V single-core cables — Part 2: Dimensions test methods and requirements for aluminium conductor cables
TC 30 Measurement of fl uid fl ow in closed conduits
ISO/CD 17089-2
Measurement of fl uid fl ow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications
TC 34 Food products
ISO/CD 14477 Vegetable fats and oils — Determination of triacylglycerols — Method by high performance liquid chromatography (HPLC)
TC 35 Paints and varnishes
ISO/CD 16474-1
Paints and varnishes — Methods of exposure to laboratory light sources — Part 1: General guidance
ISO/CD 16474-2
Paints and varnishes — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps
ISO/CD 16474-3
Paints and varnishes — Methods of exposure to laboratory light sources — Part 3: Fluores-cent UV lamps
ISO/CD 16474-4
Paints and varnishes — Methods of exposure to laboratory light sources — Part 4: Carbon-arc lamps
TC 42 Photography
ISO/CD 15781 Photography — Digital cameras — Measur-ing shooting time lag, shutter release time lag, shooting rate, and start-up time
TC 45 Rubber and rubber products
ISO/CD 11619 Specifi cation for polyurethane tubing for use primarily in pneumatic installations
ISO/CD 2285 Rubber, vulcanized or thermoplastic — Deter-mination of tension set under constant elonga-tion, and of tension set, elongation and creep under constant tensile load
ISO/CD 5892 Rubber building gaskets — Materials for preformed solid vulcanized structural gaskets — Specifi cation
ISO/CD 14285 Rubber and plastics gloves for the food indus-try and food services — Specifi cation
TC 59 Buildings and civil engineering works
ISO/CD 21929-2
Sustainability in building construction - Sus-tainability indicators — Part 2: Framework for the development of indicators for civil engi-neering works
TC 61 Plastics
ISO/CD 1872-1 Plastics — Polyethylene (PE) moulding and ex-trusion materials — Part 1: Designation system and basis for specifi cations
TC 69 Applications of statistical methods
ISO/DTR 13519
Guidance on the development and use of ISO statistical publications supported by software
TC 92 Fire safety
ISO/CD 29903 Guidance for the comparison of toxic gas data from different tests
ISO/DTR 10796-2
Fire safety engineering — Part 2: Example on the application of IS 16730 to the assessment, verifi cation and validation of a CFD model
4 ISO Update, Supplement to ISO Focus -- March 2011
ISO/DTR 10796-3
Fire safety engineering — Part 3: Example on the application of IS 16730 to the assessment, verifi cation and validation of a structural model
ISO/DTR 10796-4
Fire safety engineering — Part 4: Example on the application of IS 16730 to the assessment, verifi cation and validation of an egress model
TC 107 Metallic and other inorganic coatings
ISO/DTR 15922
Metallic and other inorganic coatings — Evalu-ation of properties of dark stain phenomenon of chromated coiled or sheet steel products
TC 108 Mechanical vibration, shock and condi-tion monitoring
ISO/CD 20958-1
Condition monitoring and diagnostics of ma-chines — Electrical signature analysis — Part 1: Three-phase induction motors
TC 113 Hydrometry
ISO/CD 4359 Liquid fl ow measurement in open channels — Rectangular, trapezoidal and U-shaped fl umes
TC 121 Anaesthetic and respiratory equipment
ISO 27427:2010/CD Amd 1
Anaesthetic and respiratory equipment — Nebulizing systems and components — Amendment 1
IEC/CD 60601-1-8
Medical electrical equipment — Part 1-8: Gen-eral requirements for basic safety and essential performance — Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
TC 131 Fluid power systems
ISO/CD 19973-1
Pneumatic fl uid power — Assessment of com-ponent reliability by testing — Part 1: General procedures
ISO/CD 19973-2
Pneumatic fl uid power — Assessment of com-ponent reliability by testing — Part 2: Direc-tional control valves
ISO/CD 19973-3
Pneumatic fl uid power — Assessment of com-ponent reliability by testing — Part 3: Cylinders with piston rod
ISO/CD 19973-4
Pneumatic fl uid power — Assessment of com-ponent reliability by testing — Part 4: Pressure regulators
ISO/CD 19973-5
Pneumatic fl uid power — Assessment of component reliability by testing — Part 5: Non-return valves, shuttle valves, dual pressure valves, one-way adjustable fl ow control valves, quick-exhaust valves
TC 135 Non-destructive testing
ISO/DTS 11774
Non-destructive testing — Performance based qualifi cation
TC 138 Plastics pipes, fi ttings and valves for the transport of fl uids
ISO/CD 12230 Polybutene (PB) pipes — Effect of time and temperature on the expected strength
TC 150 Implants for surgery
ISO/DTS 10974
Requirements for the safety and compatibility of magnetic resonance imaging for patients with an active implantable medical device
TC 156 Corrosion of metals and alloys
ISO/CD 7539-10
Corrosion of metals and alloys — Stress corro-sion cracking — Part 10: Testing of alloys using reverse U-bend test method
ISO/CD 16203 Corrosion of metals and alloys — Guidelines for selection of methods for erosion-corrosion testing in fl owing liquids
TC 165 Timber structures
ISO/PWI 12122 Timber Structures — Timber — Evaluation of characteristic values for structural timber
TC 172 Optics and photonics
ISO 10110-12:2007/CD Amd 1
Optics and photonics — Preparation of draw-ings for optical elements and systems — Part 12: Aspheric surfaces — Amendment 1
ISO/CD 8598-2 Optics and optical instruments — Focimeters — Part 2: Test lenses and methods for calibra-tion and verifi cation of focimeters
ISO/CD 11979-2
Ophthalmic implants — Intraocular lenses — Part 2: Optical properties and test methods
ISO/CD 11979-7
Ophthalmic implants — Intraocular lenses — Part 7: Clinical investigations
TC 184 Automation systems and integration
ISO/CD 20140-1
Automation systems and integration — En-vironmental and energy effi ciency evaluation method for manufacturing systems — Part 1: Overview and general principles
TC 201 Surface chemical analysis
ISO/CD 16413 Evaluation of thickness, density and interface width of thin fi lms by X-Ray refl ectometry — Instrumental requirements, alignment and posi-tioning, data collection, analysis and reporting
TC 204 Intelligent transport systems
ISO/DTS 18234-1
Intelligent transport systems — Traffi c and travel information via transport protocol expert group (TPEG) data-streams — Part 1: Introduc-tion, numbering and versions
ISO/DTS 18234-3
Intelligent transport systems — Traffi c and travel information via transport protocol expert group (TPEG) data-streams — Part 3: Service and Network Information (TPEG-SNI)
ISO/DTS 18234-7
Intelligent transport systems — Traffi c and travel information via transport protocol expert group (TPEG) data-streams — Part 7: Parking Information (TPEG-PKI)
ISO/DTS 18234-9
Intelligent transport systems — Traffi c and travel information via transport protocol expert group (TPEG) data-streams — Part 9: Traffi c Event Compact (TPEG-TEC)
ISO/DTS 18234-10
Intelligent transport systems — Traffi c and travel information via transport protocol expert group (TPEG) data-streams — Part 10: Condi-tional access information (TPEG-CAI)
ISO/DTS 21219-2
Intelligent transport systems - Traffi c and travel information via transport protocol expert group, generation 2(TPEG2) — Part 2: UML modelling rules
ISO/DTS 21219-3
Intelligent transport systems - Traffi c and travel information via transport protocol expert group, generation 2(TPEG2) — Part 3: UML to binary conversion rules
ISO/DTS 21219-5
Intelligent transport systems - Traffi c and travel information via transport protocol expert group, generation 2(TPEG2) — Part 5: Service frame-work (TPEG2-SWF)
ISO/DTS 21219-6
Intelligent transport systems - Traffi c and travel information via transport protocol expert group, generation 2(TPEG2) — Part 6: Message man-agement container (TPEG2-MMC)
ISO/DTS 21219-18
Intelligent transport systems - Traffi c and Travel Information (TTI) via Transport Protocol Expert Group, Generation 2(TPEG2) — Part 18: Traffi c Flow and Prediction application (TPEG2-TFP)
TC 215 Health informatics
ISO/CD 18104 Health informatics — Integration of a reference terminology model for nursing
TC 227 Springs
ISO/CD 16249 Springs — Symbols
TC 228 Tourism and related services
ISO/CD 14785 Tourist information offi ces — Requirements for tourist information and reception services
ISO Update, Supplement to ISO Focus -- March 2011 5
TC 229 Nanotechnologies
ISO/DTS 13278
Carbon nanotubes — Determination of metal impurities in carbon nanotubes (CNTs) using inductively coupled plasma-mass spectros-copy (ICP-MS)
TMB Technical Management Board
ISO/IEC CD 80079-38
Explosive atmospheres — Part 38: Equipment and components in explosive atmospheres in underground mines
JTC 1 Information technology
ISO/IEC CD 11693-1
Identifi cation cards — Optical memory cards — Part 1: General characteristics
ISO/IEC CD 11694-1
Identifi cation cards — Optical memory cards — Linear recording method — Part 1: Physical characteristics
ISO/IEC CD 11694-2
Identifi cation cards — Optical memory cards — Linear recording method — Part 2: Dimensions and location of the accessible optical area
ISO/IEC 10918-4:1999/PDAM 1
Information technology — Digital compression and coding of continuous-tone still images: Registration of JPEG profi les, SPIFF profi les, SPIFF tags, SPIFF colour spaces, APPn mark-ers, SPIFF compression types and Registration Authorities (REGAUT) — Part 4: — Amend-ment 1: Application specifi c marker list
ISO/IEC 15444-2:2004/PDAM 4
Information technology — JPEG 2000 image coding system: Extensions — Part 2: — Amendment 4: Block coder extension
ISO/IEC 19794-1/PDAM 2
Information technology — Biometric data interchange formats — Part 1: Framework — Amendment 2: Conformance testing methodologies
ISO/IEC 19794-2.3/PDAM 1
Information technology — Biometric data interchange formats — Part 2: Finger minutiae data — Amendment 1: Conformance testing methodology
ISO/IEC 19794-4.3/PDAM 1
Information technology — Biometric data interchange formats — Part 4: Finger image data — Amendment 1: Conformance testing methodologies
ISO/IEC CD 19794-7
Information technology — Biometric data interchange formats — Part 7: Signature/sign time series data
ISO/IEC 19794-9/PDAM 1
Information technology — Biometric data interchange formats — Part 9: Vascular image data — Amendment 1: Conformance testing methodology
ISO/IEC 19794-11/PDAM 1
Information technology — Biometric data interchange formats — Part 11: Signature/sign processed dynamic data — Amendment 1: Conformance testing methodologies
DIS circulated
Period from 01 February to 28 February 2011
These documents have obtained substantial support within the ap-propriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 2 Fasteners
ISO/DIS 888 * Bolts, screws and studs — Nom-inal lengths, and thread lengths for general purpose bolts
2011-07-03
(Revision of ISO 888:1976)
TC 5 Ferrous metal pipes and metallic fi ttings
ISO/DIS 10380 * Pipework — Corrugated metal hoses and hose assemblies 2011-07-18
(Revision of ISO 10380:2003)
TC 6 Paper, board and pulps
ISO/DIS 12625-7
* Tissue paper and tissue prod-ucts — Part 7: Determination of optical properties --Measure-ment of brightness and colour
2011-07-11
(Revision of ISO 12625-7:2007)
TC 8 Ships and marine technology
ISO/DIS 19292 * Ships and marine technology — Point-type resettable fl ame detectors for ships
2011-07-25
TC 17 Steel
ISO/DIS 15179 * Hot-rolled twin-roll cast steel sheet of structural quality and high strength steel
2011-07-17
TC 20 Aircraft and space vehicles
ISO/DIS 17107 * Space data and informa-tion transfer systems — XML specifi cation for navigation data messages
2011-07-09
ISO/DIS 22671 * Space data and information transfer systems — Space link extension (SLE) — Forward com-munications link transmission unit (CLTU) service
2011-07-02
(Revision of ISO 22671:2007)
ISO/DIS 22672 * Space data and information transfer systems — Space link extension (SLE) — For-ward space packet service specifi cation
2011-07-02
(Revision of ISO 22672:2006)
TC 22 Road vehicles
ISO/DIS 13209-2
Road vehicles — Open Test sequence eXchange format (OTX) — Part 2: Core data model specifi cation and requirements
2011-07-26
ISO/DIS 14229-1
* Road vehicles — Unifi ed diag-nostic services (UDS) — Part 1: Specifi cation and requirements
2011-07-09
(Revision of ISO 14229-1:2006)
ISO/DIS 14229-2
* Road vehicles — Unifi ed diag-nostic services (UDS) — Part 2: Session layer services
2011-07-02
ISO/DIS 14229-4
* Road vehicles — Unifi ed diag-nostic services (UDS) — Part 4: Unifi ed diagnostic services on FlexRay implementation (UDSonFR)
2011-07-02
ISO/DIS 13296 * Diesel engines — High-pressure fuel injection pipe assemblies — General requirements and dimensions
2011-07-25
(Revision of ISO 13296:2005)
6 ISO Update, Supplement to ISO Focus -- March 2011
TC 23 Tractors and machinery for agriculture and forestry
ISO 3767-1:1998/DAmd 2
* Tractors, machinery for agricul-ture and forestry, powered lawn and garden equipment — Sym-bols for operator controls and other displays — Part 1: Com-mon symbols — Amendment 2: Additional symbols concerning mainly the engine emissions system
2011-07-08
ISO/DIS 15886-1
* Agricultural irrigation equipment — Sprinklers — Part 1: Defi nition of terms and classifi cation
2011-07-12
(Revision of ISO 15886-1:2004)
TC 34 Food products
ISO/DIS 16297 Milk — Bacterial count — Proto-col for the evaluation of alterna-tive methods
2011-07-17
TC 35 Paints and varnishes
ISO/DIS 15091 Paints and varnishes — Determi-nation of the electrical conduc-tivity and the specifi c electrical resistivity
2011-07-18
TC 37 Terminology and other language and content resources
ISO/DIS 10241-2.2
* Terminological entries in standards — Part 2: Adoption of standardized terminological entries
2011-04-12
TC 38 Textiles
ISO 11092:1993/DAmd 1
* Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweat-ing guarded-hotplate test) — Amendment 1
2011-07-11
TC 45 Rubber and rubber products
ISO/DIS 13507 * Rubber compounds — Short names for properties reported in certifi cates of analysis
* Rubber, vulcanized or thermo-plastic — Determination of stress relaxation in compression — Part 2: With temperature cycling
2011-07-05
ISO 9924-2:2000/DAmd 1
* Rubber and rubber products — Determination of the composi-tion of vulcanizates and uncured compounds by thermogravim-etry — Part 2: Acrylonitrile-butadiene and halobutyl rubbers — Amendment 1
2011-07-02
ISO/DIS 13145 * Rubber — Determination of vis-cosity and stress relaxation using a rotorless, sealed oscillating-shear rheometer
2011-07-15
ISO/DIS 4652 * Rubber compounding ingredi-ents — Carbon black — Deter-mination of specifi c surface area by nitrogen adsorption methods — Single-point procedures
2011-07-05
(Revision of ISO 4652-1:1994)
TC 58 Gas cylinders
ISO/DIS 21007-2
* Gas cylinders — Identifi cation and marking using radio frequen-cy identifi cation technology — Part 2: Numbering schemes for radio frequency identifi cation
2011-07-04
(Revision of ISO 21007-2:2005)
TC 61 Plastics
ISO/DIS 9352 Plastics — Determination of resistance to wear by abrasive wheels
2011-07-29
(Revision of ISO 9352:1995)
ISO/DIS 9772 * Cellular plastics — Determina-tion of horizontal burning char-acteristics of small specimens subjected to a small fl ame
2011-07-05
(Revision of ISO 9772:2001, ISO 9772:2001/Amd 1:2003)
ISO 1628-1:2009/DAmd 1
* Plastics — Determination of the viscosity of polymers in dilute solution using capillary viscome-ters — Part 1: General principles — Amendment 1
2011-07-11
TC 68 Financial services
ISO/DIS 11568-2
* Financial services — Key management (retail) — Part 2: Symmetric ciphers, their key management and life cycle
2011-07-10
(Revision of ISO 11568-2:2005)
TC 79 Light metals and their alloys
ISO/DIS 8287 * Magnesium and magnesium alloys — Unalloyed magnesium — Chemical composition
2011-07-08
(Revision of ISO 8287:2000)
TC 85 Nuclear energy, nuclear technologies, and radio-logical protection
ISO/DIS 29661.2
* Reference radiation fi elds for ra-diation protection — Defi nitions and fundamental concepts
2011-04-19
TC 111 Round steel link chains, chain slings, components and accessories
ISO/DIS 7597 * Forged steel lifting hooks with point and eye for use with grade 8 chain
2011-07-05
(Revision of ISO 7597:1987)
TC 123 Plain bearings
ISO/DIS 4381 * Plain bearings — Tin casting al-loys for multilayer plain bearings 2011-07-08
(Revision of ISO 4381:2000)
TC 126 Tobacco and tobacco products
ISO/DIS 20193 * Tobacco and tobacco products — Determination of the width of the strands of cut tobacco
* Hydraulic fl uid power — Electri-cally modulated hydraulic control valves — Part 2: Test methods for three-way directional fl ow control valves
2011-07-29
(Revision of ISO 10770-2:1998)
ISO Update, Supplement to ISO Focus -- March 2011 7
TC 135 Non-destructive testing
ISO/DIS 9712 * Non-destructive testing — Quali-fi cation and certifi cation of NDT personnel — General principles
2011-07-18
(Revision of ISO 9712:2005, ISO 9712:2005/Cor 1:2006)
TC 142 Cleaning equipment for air and other gases
ISO/DIS 29462 * Field testing of general ven-tilation fi ltration devices and systems for in situ removal effi ciency by particle size and resistance to airfl ow
2011-07-18
TC 150 Implants for surgery
ISO/DIS 6474-2.2
* Implants for surgery — Ceramic materials — Part 2: Composite materials based on a high purity alumina matrix with zirconia reinforcement
2011-04-17
ISO/DIS 5840-3
* Cardiovascular implants — Cardiac valve prostheses — Part 3: Heart valve substitutes implanted by minimally invasive techniques
2011-07-25
ISO 7199:2009/DAmd 1
* Cardiovascular implants and artifi cial organs — Blood-gas exchangers (oxygenators) — Amendment 1: Clarifi cations for test methodologies, labelling, and sampling schedule
2011-07-17
ISO/DIS 11658 * Cardiovascular implants and ex-tracorporeal systems — Blood/tissue contact surface modifi ca-tions for extracorporeal perfusion systems
2011-07-17
TC 156 Corrosion of metals and alloys
ISO/DIS 14802 * Corrosion of metals and alloys — Guidelines for applying statistics to analysis of corrosion data
2011-07-05
TC 163 Thermal performance and energy use in the built environment
ISO/DIS 14857 * Thermal performance in the built environment — Determination of air permeance of building materials
2011-07-23
TC 164 Mechanical testing of metals
ISO/DIS 4965-1
* Metallic materials — Fatigue testing — Uniaxial dynamic force calibration — Part 1: Testing systems
2011-07-03
(Revision of ISO 4965:1979)
ISO/DIS 4965-2
* Metallic materials — Fatigue testing — Uniaxial dynamic force calibration — Part 2: Dy-namic calibration device (DCD) instrumentation
2011-07-03
(Revision of ISO 4965:1979)
ISO/DIS 12107 * Metallic materials — Fatigue testing — Statistical planning and analysis of data
2011-07-09
(Revision of ISO 12107:2003)
TC 172 Optics and photonics
ISO/DIS 16331-1
Optics and optical instruments — Laboratory procedures for testing surveying and construc-tion instruments — Part 1: Performance of handheld laser distance meters
2011-07-22
TC 173 Assistive products for per-sons with disability
ISO/DIS 7176-11
* Wheelchairs — Part 11: Test dummies 2011-07-10
(Revision of ISO 7176-11:1992)
ISO/DIS 7176-16
* Wheelchairs — Part 16: Resist-ance to ignition of upholstered parts — Requirements and test methods
2011-07-10
(Revision of ISO 7176-16:1997)
TC 176 Quality management and quality assurance
ISO/DIS 10004 * Quality management — Custom-er satisfaction — Guidelines for monitoring and measuring
2011-07-29
(Revision of ISO/TS 10004:2010)
TC 190 Soil quality
ISO/DIS 13196 * Soil quality — Screening soils for selected elements by energy-dispersive X-ray fl uorescence spectrometry using a handheld or portable instrument
2011-07-11
TC 198 Sterilization of health care products
ISO/DIS 13408-7
* Aseptic processing of health care products — Part 7: Alterna-tive processes for atypical medi-cal devices and combination products
2011-07-26
TC 205 Building environment design
ISO/DIS 11855-5
* Building environment design — Standards for the design, construction and operation of radiant heating and cooling sys-tems — Part 5: Installation
2011-07-10
TC 211 Geographic information/Geomatics
ISO/DIS 19155 Geographic information — Place Identifi er (PI) architecture 2011-07-29
TC 227 Springs
ISO/DIS 11891.2
* Hot formed helical compres-sion springs — Technical specifi cations
2011-04-18
JTC 1 Information technology
ISO/IEC DIS 40210
Information technology — W3C SOAP Version 1.2 Part 1: Mes-saging Framework (Second Edition)
2011-07-26
ISO/IEC DIS 40220
Information technology — W3C SOAP Version 1.2 Part 2: Ad-juncts (Second Edition)
2011-07-26
ISO/IEC DIS 40230
Information technology — W3C SOAP Message Transmission Optimization Mechanism
2011-07-26
ISO/IEC DIS 40240
Information technology — W3C Web Services Addressing 1.0 — Core
2011-07-26
ISO/IEC DIS 40250
Information technology — W3C Web Services Addressing 1.0 — SOAP Binding
2011-07-26
ISO/IEC DIS 40260
Information technology — W3C Web Services Addressing 1.0 — Metadata
2011-07-26
ISO/IEC DIS 40270
Information technology — W3C Web Services Policy 1.5 — Framework
2011-07-26
8 ISO Update, Supplement to ISO Focus -- March 2011
ISO/IEC DIS 40280
Information technology — W3C Web Services Policy 1.5 — Attachment
2011-07-26
ISO/IEC DIS 23271
* Information technology — Com-mon Language Infrastructure (CLI)
2011-07-03
(Revision of ISO/IEC 23271:2006)
ISO/IEC 14496-4:2004/DAmd 40
* Information technology — Cod-ing of audio-visual objects — Part 4: Conformance testing — Amendment 40: Extended-Core2D conformance
2011-07-16
ISO/IEC 14496-5:2001/DAmd 29
* Information technology — Cod-ing of audio-visual objects — Part 5: Reference software — Amendment 29: Reference software for LASeR presentation and modifi cation of structured information (PMSI) tools
2011-07-19
ISO/IEC 14496-5:2001/DAmd 30
Information technology — Cod-ing of audio-visual objects — Part 5: Reference software — Amendment 30: Extended-Core2D reference software
2011-07-16
ISO/IEC 14496-12:2008/DAmd 3
Information technology — Cod-ing of audio-visual objects — Part 12: ISO base media fi le format — Amendment 3: DASH support and RTP reception hint track processing
2011-07-16
ISO/IEC 14496-15:2010/DAmd 1
* Information technology — Cod-ing of audio-visual objects — Part 15: Advanced Video Coding (AVC) fi le format — Amendment 1: Sub-track defi nitions
2011-07-16
ISO/IEC 15444-12:2008/DAmd 3
Information technology — JPEG 2000 image coding system — Part 12: ISO base media fi le format — Amendment 3: DASH support and RTP reception hint track processing
2011-07-16
ISO/IEC 21000-8:2008/DAmd 2
Information technology — Mul-timedia framework (MPEG-21) — Part 8: Reference software — Amendment 2: Reference software for media value chain ontology (MVCO)
2011-07-16
ISO/IEC 23000-11:2009/DAmd 2
Information technology — Mul-timedia application format (MPEG-A) — Part 11: Stereo-scopic video application format — Amendment 2: Signalling of additional composition type and profi les
2011-07-16
ISO/IEC DIS 23001-6
Information technology — MPEG systems technologies — Part 6: Dynamic adaptive streaming over HTTP (DASH)
2011-07-16
ISO/IEC DIS 23003-3
Information technology — MPEG audio technologies — Part 3: Unifi ed speech and audio coding
2011-07-16
ISO/IEC 23007-1:2010/DAmd 1
Information technology — Rich media user interfaces — Part 1: Widgets — Amendment 1: Widget extensions
2011-07-16
ISO/IEC DIS 17203
Information technology — Open Virtualization Format (OVF) specifi cation
2011-07-29
FDIS circulated
Period from 01 February to 28 February 2011
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 5 Ferrous metal pipes and metallic fi ttings
ISO/FDIS 7186 * Ductile iron products for sewer-age applications 2011-04-22
(Revision of ISO 7186:1996)
TC 8 Ships and marine technology
ISO/FDIS 23269-3
* Ships and marine technology — Breathing apparatus for ships — Part 3: Self-contained breathing apparatus (safety equipment) required by the IMO IBC and IGC Codes
2011-04-08
TC 20 Aircraft and space vehicles
ISO/FDIS 24113
* Space systems — Space debris mitigation requirements 2011-04-18
(Revision of ISO 24113:2010)
TC 22 Road vehicles
ISO 11838:1997/FDAmd 1
* Motorcycle and motorcycle-rider kinematics — Vocabulary — Amendment 1
2011-04-15
ISO 14722:1998/FDAmd 1
* Moped and moped-rider kinematics — Vocabulary — Amendment 1
2011-04-15
TC 29 Small tools
ISO/FDIS 3860 * Bore cutters with key drive — Form milling cutters with constant profi le
2011-04-17
(Revision of ISO 3860:1976)
ISO/FDIS 6462 * Face and shoulder milling cutters with indexable inserts — Dimensions
2011-04-12
(Revision of ISO 6462:1983)
TC 30 Measurement of fl uid fl ow in closed conduits
ISO/FDIS 22158
* Input/output protocols and elec-tronic interfaces for water meters — Requirements
2011-04-25
TC 34 Food products
ISO/FDIS 11287
* Green tea — Defi nition and basic requirements 2011-04-08
TC 37 Terminology and other language and content resources
ISO/FDIS 24619
* Language resource management — Persistent identifi cation and sustainable access (PISA)
2011-04-17
TC 51 Pallets for unit load method of materials handling
ISO/FDIS 8611-1
* Pallets for materials handling — Flat pallets — Part 1: Test methods
2011-04-12
(Revision of ISO 8611-1:2004)
ISO Update, Supplement to ISO Focus -- March 2011 9
ISO/FDIS 8611-2
* Pallets for materials han-dling — Flat pallets — Part 2: Performance requirements and selection of tests
2011-04-12
(Revision of ISO/TS 8611-2:2005)
ISO/FDIS 8611-3
* Pallets for materials handling — Flat pallets — Part 3: Maximum working loads
2011-04-12
(Revision of ISO/TS 8611-3:2005)
TC 61 Plastics
ISO/FDIS 11357-3
* Plastics — Differential scan-ning calorimetry (DSC) — Part 3: Determination of temperature and enthalpy of melting and crystallization
2011-04-08
(Revision of ISO 11357-3:1999, ISO 11357-3:1999/Amd 1:2005)
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/FDIS 13501
* Petroleum and natural gas indus-tries — Drilling fl uids — Process-ing equipment evaluation
TC 138 Plastics pipes, fi ttings and valves for the transport of fl uids
ISO/FDIS 21307
* Plastics pipes and fi ttings — Butt fusion jointing procedures for polyethylene (PE) pipes and fi ttings used in the construction of gas and water distribution systems
2011-04-17
(Revision of ISO 21307:2009)
ISO/FDIS 25780
* Plastics piping systems for pres-sure and non-pressure water supply, irrigation, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Pipes with fl exible joints intended to be installed using jacking techniques
(Revision of ISO 7010:2003, ISO 7010:2003/Amd 1:2006, ISO 7010:2003/FDAmd 50, ISO 7010:2003/FDAmd 55, ISO 7010:2003/FDAmd 56, ISO 7010:2003/FDAmd 57, ISO 7010:2003/FDAmd 59, ISO 7010:2003/FDAmd 60, ISO 7010:2003/Amd 2:2007, ISO 7010:2003/Amd 3:2007, ISO 7010:2003/FDAmd 61, ISO 7010:2003/DAmd 75, ISO 7010:2003/DAmd 76, ISO 7010:2003/Amd 4:2009, ISO 7010:2003/Amd 5:2010, ISO 7010:2003/Amd 6:2010)
TC 146 Air quality
ISO/FDIS 11057
* Air quality — Test method for fi ltration characterization of cleanable fi lter media
2011-04-24
TC 150 Implants for surgery
ISO/FDIS 23500
* Guidance for the preparation and quality management of fl uids for haemodialysis and related therapies
2011-04-10
TC 157 Non-systemic contra-ceptives and STI barrier prophylactics
* Space projects — Programme man-agement — Dependability assurance requirements
J
ISO 27026:2011
* Space systems — Programme man-agement — Breakdown of project management structures
F
TC 22 Road vehicles
ISO 15765-4:2011
* Road vehicles — Diagnostic commu-nication over Controller Area Network (DoCAN) — Part 4: Requirements for emissions-related systems
N
ISO 14793:2011
* Road vehicles — Heavy commercial vehicles and buses — Lateral transient response test methods
N
ISO 14794:2011
* Heavy commercial vehicles and buses — Braking in a turn — Open-loop test methods
L
ISO Update, Supplement to ISO Focus -- March 2011 11
ISO 16333:2011
* Heavy commercial vehicles and buses — Steady-state rollover threshold — Tilt-table test method
H
ISO 17288-1:2011
* Passenger cars — Free-steer behav-iour — Part 1: Steering-release open-loop test method
D
ISO 17288-2:2011
* Passenger cars — Free-steer behav-iour — Part 2: Steering-pulse open-loop test method
G
TC 23 Tractors and machinery for agri-culture and forestry
ISO 22868:2011
Forestry and gardening machinery — Noise test code for portable hand-held machines with internal combustion engine — Engineering method (Grade 2 accuracy)
Q
TC 28 Petroleum products and lubricants
ISO 20783-1:2011
Petroleum and related products — Determination of emulsion stability of fi re-resistant fl uids — Part 1: Fluids in category HFAE
D
TC 34 Food products
ISO 7301:2011 Rice — Specifi cation K
ISO 12966-2:2011
* Animal and vegetable fats and oils — Gas chromatography of fatty acid methyl esters — Part 2: Preparation of methyl esters of fatty acids
H
ISO 27107:2008
* Animal and vegetable fats and oils — Determination of peroxide value — Potentiometric end-point determination
E
ISO 1446:2001/Amd 1:2011
Green coffee — Determination of water content — Basic reference method — Amendment 1
XZ
ISO 8455:2011 * Green coffee — Guidelines for storage and transport C
TC 35 Paints and varnishes
ISO 2811-1:2011
Paints and varnishes — Determina-tion of density — Part 1: Pyknometer method
E
ISO 2811-2:2011
Paints and varnishes — Determination of density — Part 2: Immersed body (plummet) method
E
ISO 2811-3:2011
Paints and varnishes — Determination of density — Part 3: Oscillation method D
ISO 2811-4:2011
Paints and varnishes — Determina-tion of density — Part 4: Pressure cup method
D
TC 39 Machine tools
ISO 29262:2011
* Production equipment for microsys-tems — Interface between end effector and handling system
J
TC 45 Rubber and rubber products
ISO 4660:2011 Rubber, raw natural — Colour index test C
ISO 4635:2011 * Rubber, vulcanized — Preformed joint seals for use between concrete paving sections of highways — Specifi cation
F
TC 61 Plastics
ISO 10350-2:2011
Plastics — Acquisition and presenta-tion of comparable single-point data — Part 2: Long-fi bre-reinforced plastics
E
ISO 8516:2011 Textile glass — Textured yarns — Basis for a specifi cation B
TC 68 Financial services
ISO 9564-1:2011
* Financial services — Personal Identifi -cation Number (PIN) management and security — Part 1: Basic principles and requirements for PINs in card-based systems
N
TC 79 Light metals and their alloys
ISO 2106:2011 Anodizing of aluminium and its alloys — Determination of mass per unit area (surface density) of anodic oxidation coatings — Gravimetric method
C
ISO 8994:2011 Anodizing of aluminium and its alloys — Rating system for the evaluation of pitting corrosion — Grid method
B
TC 92 Fire safety
ISO 26367-1:2011
Guidelines for assessing the adverse environmental impact of fi re effl uents — Part 1: General
J
TC 94 Personal safety -- Protective clothing and equipment
ISO 16073:2011
* Wildland fi refi ghting personal protec-tive equipment — Requirements and test methods
W
TC 106 Dentistry
ISO 3107:2011 Dentistry — Zinc oxide/eugenol ce-ments and zinc oxide/non-eugenol cements
E
ISO 27020:2010
Dentistry — Brackets and tubes for use in orthodontics F
TC 119 Powder metallurgy
ISO 3953:2011 Metallic powders — Determination of tap density B
TC 121 Anaesthetic and respiratory equipment
ISO 81060-2:2009/Cor 1:2011
* Non-invasive sphygmomanometers — Part 2: Clinical validation of automated measurement type — Technical Cor-rigendum 1
free
TC 138 Plastics pipes, fi ttings and valves for the transport of fl uids
ISO 11296-3:2009
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 3: Lin-ing with close-fi t pipes
K
ISO 12176-3:2011
Plastics pipes and fi ttings — Equip-ment for fusion jointing polyethylene systems — Part 3: Operator's badge
D
ISO 10639:2004/Amd 1:2011
* Plastics piping systems for pressure and non-pressure water supply — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin — Amendment 1
XZ
TC 145 Graphical symbols
ISO 3864-2:2004/Amd 1:2011
Graphical symbols — Safety colours and safety signs — Part 2: Design principles for product safety labels — Amendment 1: Revision of Table B.1
XZ
TC 147 Water quality
ISO 5667-23:2011
Water quality — Sampling — Part 23: Guidance on passive sampling in surface waters
L
TC 150 Implants for surgery
ISO 17853:2011
* Wear of implant materials — Polymer and metal wear particles — Isolation and characterization
H
12 ISO Update, Supplement to ISO Focus -- March 2011
ISO 18192-1:2011
* Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 1: Loading and displacement parameters for wear testing and cor-responding environmental conditions for test
M
TC 157 Non-systemic contraceptives and STI barrier prophylactics
ISO 16037:2002/Amd 1:2011
Rubber condoms for clinical trials — Measurement of physical properties — Amendment 1
XZ
ISO 23409:2011
* Male condoms — Requirements and test methods for condoms made from synthetic materials
S
TC 164 Mechanical testing of metals
ISO 6892-2:2011
Metallic materials — Tensile testing — Part 2: Method of test at elevated temperature
K
TC 172 Optics and photonics
ISO 8624:2011 Ophthalmic optics — Spectacle frames — Measuring system and terminology E
TC 184 Automation systems and integration
ISO 10303-52:2011
* Industrial automation systems and integration — Product data represen-tation and exchange — Part 52: Inte-grated generic resource: Mesh-based topology
W
TC 211 Geographic information/Geomatics
ISO 19143:2010
Geographic information — Filter encoding X
TC 215 Health informatics
ISO 12967-1:2009
Health informatics — Service architec-ture — Part 1: Enterprise viewpoint U
ISO 12967-2:2009
Health informatics — Service architec-ture — Part 2: Information viewpoint U
ISO 12967-3:2009
Health informatics — Service architec-ture — Part 3: Computational viewpoint N
ISO 21090:2011
* Health informatics — Harmonized data types for information interchange XD
TC 216 Footwear
ISO 10748:2011
Footwear — Test method for slide fasteners — Slider locking strength C
JTC 1 Information technology
ISO/IEC 24793-1:2011
* Information technology — Mobile multicast communications: Framework — Part 1:
L
ISO/IEC 24793-2:2011
* Information technology — Mobile mul-ticast communications: Protocol over native IP multicast networks — Part 2:
K
ISO/IEC 15026-2:2011
* Systems and software engineering — Systems and software assurance — Part 2: Assurance case
E
ISO/IEC 15909-2:2011
* Systems and software engineering — High-level Petri nets — Part 2: Transfer format
XA
ISO/IEC 25040:2011
* Systems and software engineering — Systems and software Quality Require-ments and Evaluation (SQuaRE) — Evaluation process
S
ISO/IEC TR 14165-372:2011
* Information technology — Fibre Chan-nel — Part 372: Methodologies of inter-connects-2 (FC-MI-2)
V
ISO/IEC 18033-1:2005/Amd 1:2011
* Information technology — Security techniques — Encryption algorithms — Part 1: General — Amendment 1
XZ
ISO/IEC 14496-5:2001/Amd 27:2011
* Information technology — Coding of audio-visual objects — Part 5: Reference software — Amendment 27: Scalable complexity 3D mesh coding reference software
XZ
ISO/IEC 14496-26:2010/Cor 2:2011
* Information technology — Coding of audio-visual objects — Part 26: Audio conformance — Technical Corrigen-dum 2
free
ISO/IEC 15938-12:2008/Amd 1:2011
* Information technology — Multimedia content description interface — Part 12: Query format — Amendment 1: Reference software and fl at metadata output
M
ISO/IEC 19784-4:2011
* Information technology — Biometric application programming interface — Part 4: Biometric sensor function provider interface
R
ISO/IEC 19795-5:2011
* Information technology — Biometric performance testing and reporting — Part 5: Access control scenario and grading scheme
R
Standards confi rmed
The following International Standards are confi mred for a fi ve year period:
24 Milan (Italy) TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines
24 Milan (Italy) TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air purity specifi cation and compressed air treatment equipment
24 Milan (Italy) TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems
25 Milan (Italy) TC 118 Compressors and pneumatic tools, ma-chines and equipment
28 Tokyo (Japan) TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in build-ing construction
29 Berlin (Germany) TC 117 Fans
April 2011
1 Prague (Czech Republic)
JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages
2-3 Oostenede (Belgium)
TC 23/SC 3 Tractors and machin-ery for agriculture and forestry/Safety and comfort
3-4 Oostenede (Belgium)
TC 23 Tractors and machin-ery for agriculture and forestry
4 Urbach (Germany)
TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
4-5 Madrid (Spain) TC 34/SC 11 Food products/Animal and vegetable fats and oils
4-7 Berlin (Germany) TC 127 Earth-moving machinery
6 Madrid (Spain) TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals
6 Bratislava (Slovakia)
TC 226 Materials for the production of primary aluminium
7 London (United Kingdom)
TC 43/SC 2 Acoustics/Building acoustics
7 Paris (France) TC 92/SC 1 Fire safety/Fire initia-tion and growth
7 La Plaine St-Denis (France)
TC 92/SC 2 Fire safety/Fire containment
7 Paris (France) TC 92/SC 3 Fire safety/Fire threat to people and environment
7-8 London (United Kingdom)
TC 43/SC 1 Acoustics/Noise
8 London (United Kingdom)
TC 43 Acoustics
8 Paris (France) TC 92 Fire safety
8 La Plaine St-Denis (France)
TC 92/SC 4 Fire safety/Fire safety engineering
8 Delft (Netherlands)
TC 153/SC 1 Valves/Design, manu-facture, marking and testing
10-12 Porto (Portugal) * TC 59/SC 14 Buildings and civil engineering works/Design life
11-12 Tokyo (Japan) TC 210 Quality management and corresponding general aspects for medical devices
11-15 St-Denis (France)
* JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)
11-15 Prague (Czech Republic)
TC 204 Intelligent transport systems
11-16 Berlin (Germany) ** TC 130 Graphic technology
13-14 Dresden (Germany)
TC 199 Safety of machinery
14 Milan (Italy) TC 8/SC 12 Ships and marine technology/Ships and marine technology - Large yachts
15 Porto (Portugal) TC 23/SC 7 Tractors and machin-ery for agriculture and forestry/Equipment for harvesting and conservation
18-19 Singapore (Singapore)
JTC 1/SC 27 Information tech-nology/IT Security techniques
19-20 Berlin (Germany) TC 22/SC 1 Road vehicles/Ignition equipment
20-21 Astana (Kazakhstan)
TC 67/SC 6 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Processing equip-ment and systems
12 Berlin (Germany) TC 110/SC 2 Industrial trucks/Safety of powered industrial trucks
12-13 Florida (USA) TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications
* JTC 1/SC 32 Information technolo-gy/Data management and interchange
16-20 Zurich (Switzerland)
TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
16-20 Beijing (China) TC 247 Fraud countermeas-ures and controls
16-20 Berlin (Germany) TC 248 Project committee: Sustainability criteria for bioenergy
16-22 Vienna (Austria) * TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
18 Milan (Italy) * TC 131/SC 7 Fluid power systems/Sealing devices
18-19 Bratislava (Slovakia)
TC 44/SC 10 Welding and allied processes/Unifi cation of requirements in the fi eld of metal welding
18-19 Pau (France) TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems
* TC 21/SC 5 Equipment for fi re protection and fi re fi ghting/Fixed fi refi ghting systems using water
27-29 Washington, D.C (USA)
TC 258 Project, programme and portfolio management
27-30 Suresnes (France)
TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements
29 Berlin (Germany) * TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
29-30 London (United Kingdom)
** TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers
San Francisco (USA)
** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fl uids, and well cements
Hong Kong (Hong Kong, China)
** TC 71 Concrete, reinforced concrete and pre-stressed concrete
(South Africa) ** TC 133 Sizing systems and designations for clothes
June-July 2011
27-1 Berlin (Germany) TC 94/SC 6 Personal safety -- Protective clothing and equipment/Eye and face protection
24 Turin (Italy) * JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information
August-September 2011
29-2 Warsaw (Poland) * JTC 1/SC 35 Information technol-ogy/User interfaces
September 2011
9-15 Chicago (USA) ** TC 163 Thermal performance and energy use in the built environment
12-14 Chicago (USA) * TC 205 Building environment design
12-16 Vienna (Austria) * TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock
12-16 Florianopolis (Brazil)
** TC 150 Implants for surgery
12-16 Florianopolis (Brazil)
* TC 150/SC 1 Implants for surgery/Materials
12-16 Rotorua (New Zealand)
* TC 218 Timber
13-15 Moscow (Rus-sian Federation)
* TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries
15-17 Brescia (Italy) ** TC 201 Surface chemical analysis
15-22 Beijing (China) ** TC 213 Dimensional and geometrical product specifi cations and verifi cation
18-24 Phoenix (USA) TC 106 Dentistry
18-24 Paris (France) * TC 164 Mechanical testing of metals
19 Chicago (USA) * TC 21/SC 3 Equipment for fi re protection and fi re fi ghting/Fire detection and alarm systems
19 Chicago (USA) * TC 21/SC 11 Equipment for fi re protection and fi re fi ghting/Smoke and heat control systems and components
19-20 Paris (France) * TC 164/SC 3 Mechanical testing of metals/Hardness testing
19-20 New Delhi (India) * TMB Technical Manage-ment Board
19-22 Paris (France) * TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
19-23 Seoul (Korea, Republic of)
* JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)
19-23 Bali (Indonesia) * TC 165 Timber structures
19-23 Adelaide (Australia)
* TC 190 Soil quality
18 ISO Update, Supplement to ISO Focus -- March 2011
19-23 Adelaide (Australia)
* TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codifi cation
19-23 Adelaide (Australia)
* TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics
19-23 Adelaide (Australia)
* TC 190/SC 4 Soil quality/Biological methods
19-23 Adelaide (Australia)
* TC 190/SC 7 Soil quality/Soil and site assessment
20 Chicago (USA) ** TC 21/SC 6 Equipment for fi re protection and fi re fi ghting/Foam and powder media and fi xed fi refi ghting sys-tems using foam and powder
20 Berlin (Germany) * TC 29/SC 8 Small tools/Tools for pressing and moulding
20-22 Paris (France) * TC 164/SC 5 Mechanical testing of metals/Fatigue testing
20-23 Washington, D.C (USA)
** TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes
21 Chicago (USA) * TC 21/SC 2 Equipment for fi re protection and fi re fi ghting/Manu-ally transportable fi re extinguishers
21 Vienna (Austria) * TC 146/SC 6 Air quality/Indoor air
21 Paris (France) * TC 164/SC 2 Mechanical testing of metals/Ductility testing
21-22 Chicago (USA) * TC 21/SC 8 Equipment for fi re protection and fi re fi ghting/Gaseous media and fi refi ghting systems using gas
21-23 New Delhi (India) ** GA General Assembly
22 Sao Paulo (Brazil)
* TC 142 Cleaning equipment for air and other gases
22-23 Las Vegas (USA) TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction
22-23 Paris (France) * TC 164/SC 1 Mechanical testing of metals/Uniaxial testing
23 Chicago (USA) * TC 21 Equipment for fi re protection and fi re fi ghting
24 New Delhi (India) * COUNCIL Council
26-27 Geneva (Switzerland)
* TAG 8 Building
26-27 La Plaine St-Denis (France)
TC 206 Fine ceramics
Shanghai (China) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
** TC 138/SC 1 Plastics pipes, fi ttings and valves for the transport of fl uids/Plastics pipes and fi ttings for soil, waste and drainage (includ-ing land drainage)
26 Amsterdam (Netherlands)
* TC 138/SC 2 Plastics pipes, fi ttings and valves for the transport of fl uids/Plastics pipes and fi ttings for water supplies
26 Amsterdam (Netherlands)
** TC 138/SC 4 Plastics pipes, fi ttings and valves for the transport of fl uids/Plastics pipes and fi ttings for the supply of gaseous fuels
27 Amsterdam (Netherlands)
** TC 138/SC 3 Plastics pipes, fi ttings and valves for the transport of fl uids/Plastics pipes and fi ttings for industrial applications
27-28 (Europe) ** TC 44 Welding and allied processes
(Korea, Repub-lic of)
** JTC 1/SC 17 Information technol-ogy/Cards and per-sonal identifi cation
London (United Kingdom)
** TC 59/SC 15 Buildings and civil engineering works/Performance criteria for single family at-tached and detached dwellings
(China) ** TC 111 Round steel link chains, chain slings, components and accessories
(China) ** TC 111/SC 1 Round steel link chains, chain slings, components and ac-cessories/Chains and chain slings
(China) ** TC 111/SC 3 Round steel link chains, chain slings, components and accessories/Components and accessories
(Netherlands) ** TC 138 Plastics pipes, fi ttings and valves for the transport of fl uids
Amsterdam (Netherlands)
** TC 138/SC 5 Plastics pipes, fi ttings and valves for the transport of fl uids/General properties of pipes, fi ttings and valves of plastic materials and their accessories -- Test methods and basic specifi cations
Vienna (Austria) ** TC 146/SC 1 Air quality/Stationary source emissions
Berlin (Germany) ** TC 160/SC 1 Glass in build-ing/Product considerations
October-November 2011
31-3 London (United Kingdom)
** TC 46/SC 11 Information and doc-umentation/Archives/records management
November 2011
2-4 Bangkok (Thailand)
* TC 123 Plain bearings
2-4 Bangkok (Thailand)
* TC 123/SC 2 Plain bearings/Materi-als and lubricants, their properties, characteristics, test methods and testing conditions
2-4 Bangkok (Thailand)
* TC 123/SC 3 Plain bearings/Dimen-sions, tolerances and construction details
2-4 Bangkok (Thailand)
* TC 123/SC 5 Plain bearings/Quality analysis and assurance
2-4 Bangkok (Thailand)
* TC 123/SC 6 Plain bearings/Terms and common items
2-4 Bangkok (Thailand)
* TC 123/SC 7 Plain bearings/Spe-cial types of plain bearings
4 Cincinnati (USA) * TC 60 Gears
4 (Malaysia) ** TC 238 Solid biofuels
7-11 Osaka (Japan) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing
7-12 (USA) * JTC 1 Information technology
10 Annapolis (USA) * TC 70/SC 7 Internal combustion engines/Tests for lubricating oil fi lters
10-11 Venice (Italy) * TC 227 Springs
14-16 Nagoya (Japan) ** TC 189 Ceramic tile
20 ISO Update, Supplement to ISO Focus -- March 2011
14-18 (South Africa) ** TC 229 Nanotechnologies
17 Munich (Germany)
* TC 44/SC 12 Welding and allied processes/Soldering materials
21-22 Berlin (Germany) * TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes
(Japan) ** TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics
Pau (France) ** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fl uids, and well cements
November-December 2011
26-1 (Israel) ** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems
December 2011
5-9 Sydney (Australia)
* TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machines
4th Quarter 2011
(USA) ** TC 30/SC 7 Measurement of fl uid fl ow in closed conduits/Volume methods including water meters
(Japan) ** TC 172/SC 3 Optics and photon-ics/Optical materials and components
(South Africa) ** TC 211 Geographic in-formation/Geomatics
2nd Semester 2011
Tokyo (Japan) ** TC 130 Graphic technology
Month unknown 2011
(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
Kyoto (Japan) ** TC 33 Refractories
January 2012
Charlotte (USA) ** TC 213 Dimensional and geometrical product specifi cations and verifi cation
February 2012
20-24 Kyoto (Japan) * JTC 1/SC 35 Information technol-ogy/User interfaces
22-23 Geneva (Switzerland)
* TMB Technical Manage-ment Board
Florida (USA) ** TC 115 Pumps
(USA) ** TC 184/SC 2 Automation systems and integration/Robots and robotic devices
February-March 2012
25-5 Toulouse (France)
** TC 34/SC 12 Food products/Sen-sory analysis
March 2012
29 (Unknown) ** TC 23/SC 19 Tractors and machin-ery for agriculture and forestry/Agricultural electronics
(China) ** JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems
(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
(Korea, Repub-lic of)
** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
(Italy) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments
7-11 Berlin (Germany) ** TC 46 Information and documentation
10 Chicago (USA) ** TC 68 Financial services
(Unknown) ** JTC 1/SC 38 Information tech-nology/Distributed application platforms and services (DAPS)
(Unknown) ** TC 126 Tobacco and tobacco products
June 2012
6-7 Geneva (Switzerland)
** COPOLCO Committee on con-sumer policy
13-14 Geneva (Switzerland)
* TMB Technical Manage-ment Board
Calgary (Canada) ** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fl uids, and well cements
2nd Quarter 2012
ISO Update, Supplement to ISO Focus -- March 2011 21
(Europe) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
Vienna (Austria) ** REMCO Committee on refer-ence materials
Delft (Netherlands)
** TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection
(Unknown) ** TC 34 Food products
Chicago (USA) ** TC 68/SC 4 Financial services/Securities and related fi nancial instruments
(South Africa) ** TC 102 Iron ore and direct reduced iron
Berlin (Germany) ** TC 107 Metallic and other inorganic coatings
Sydney (Australia)
** TC 138 Plastics pipes, fi ttings and valves for the transport of fl uids
Sydney (Australia)
** TC 138/SC 1 Plastics pipes, fi ttings and valves for the transport of fl uids/Plastics pipes and fi ttings for soil, waste and drainage (includ-ing land drainage)
(Unknown) ** TC 146 Air quality
(Brazil) ** TC 164 Mechanical testing of metals
(Finland) ** TC 190 Soil quality
(China) ** TC 202 Microbeam analysis
(France) ** TC 205 Building environment design
(Thailand) ** TC 207 Environmental management
February-March 2013
25-1 (South America) ** JTC 1/SC 35 Information technol-ogy/User interfaces
March 2013
(Kenya) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
August 2013
26-30 (South America) ** JTC 1/SC 35 Information technol-ogy/User interfaces
September 2013
(Korea, Repub-lic of)
** TC 123/SC 2 Plain bearings/Materi-als and lubricants, their properties, characteristics, test methods and testing conditions
(Korea, Repub-lic of)
** TC 123/SC 3 Plain bearings/Dimen-sions, tolerances and construction details
(Korea, Repub-lic of)
** TC 123/SC 5 Plain bearings/Quality analysis and assurance
(Korea, Repub-lic of)
** TC 123/SC 6 Plain bearings/Terms and common items
(Korea, Repub-lic of)
** TC 123/SC 7 Plain bearings/Spe-cial types of plain bearings
Tokyo (Japan) ** TC 142 Cleaning equipment for air and other gases
October 2013
Mexico (Mexico) ** TC 113 Hydrometry
Month unknown 2013
(USA) ** REMCO Committee on refer-ence materials
(Unknown) ** TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
(Norway) ** TC 138/SC 1 Plastics pipes, fi ttings and valves for the transport of fl uids/Plastics pipes and fi ttings for soil, waste and drainage (includ-ing land drainage)
Month unknown 2014
(USA) ** TC 142 Cleaning equipment for air and other gases
Month unknown 2015
London (United Kingdom)
** TC 142 Cleaning equipment for air and other gases