ISO Update Supplement to ISO Focus + February 2011 People and places ISO Members 2 International Standards in process from 1 to 31 January 2011 Committee Drafts (CD) registered 3 Draft International Standards (DIS) circulated 5 Final draft International Standards (FDIS) circulated 9 Standards published 13 Standards confirmed 15 Standards withdrawn 16 Meeting calendar 17
23
Embed
Supplement to ISO Focus+ · ISO/CD 20653 Road vehicles — Degrees of protection (IP-Code) — Protection of electrical equipment against foreign objects, water and access
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ISO Update
Supplement to ISO Focus+
February 2011
People and places
ISO Members 2
International Standards in processfrom 1 to 31 January 2011
Committee Drafts (CD) registered 3
Draft International Standards (DIS) circulated 5
Final draft International Standards (FDIS) circulated 9
Standards published 13
Standards confirmed 15
Standards withdrawn 16
Meeting calendar 17
People and places
2 ISO Update, Supplement to ISO Focus+– February 2011
ISO Members
Since the January 2010 issue of ISO Focus+, the following changes affecting ISO members have occurred:
New CEOs
Member bodies
KAZAKHSTAN (KAZMEMST)
Chairman: Mr. Satpayev Ryskeldi
KENYA (KEBS)
Managing Director: Mr. Joseph K. Koskey
Correspondent member
TAJIKISTAN (TJKSTN)
Director: Mr. Bakhtiyor Shukurov
ISO Update, Supplement to ISO Focus -- February 2011 3
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Stand-ard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 January to 31 January 2011
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
TC 6 Paper, board and pulps
ISO/CD 8791-2 Paper and board — Determination of rough-ness/smoothness (air leak methods) — Part 2: Bendtsen method
TC 17 Steel
ISO/CD 5001 Cold-reduced carbon steel sheet for vitreous enamelling
TC 22 Road vehicles
ISO/CD 6621-4 Internal combustion engines — Piston rings — Part 4: General specifications
ISO/CD 6622-2 Internal combustion engines — Piston rings — Part 2: Rectangular rings made of steel
ISO/CD 6626-2 Internal combustion engines — Piston rings — Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron
ISO/CD 16750-3
Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads
ISO/CD 20653 Road vehicles — Degrees of protection (IP-Code) — Protection of electrical equipment against foreign objects, water and access
TC 23 Tractors and machinery for agriculture and forestry
ISO/CD 11783-1
Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 1: General standard for mobile data communication
ISO/CD 11783-3
Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 3: Data link layer
TC 24 Particle characterization including sieving
ISO/CD 20998-2
Measurement and characterization of particles by acoustic methods — Part 2: Guidelines for linear theory
TC 38 Textiles
ISO/DTR 11827
Textiles — Composition testing — Identification of fibres
TC 45 Rubber and rubber productsISO/CD 16301 Rubber and plastics hoses and hose assem-
blies, wire- or textile-reinforced, for hydraulic-jack applications — Specification
ISO 4656:2007/CD Amd 1
Rubber compounding ingredients — Car-bon black — Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN) — Amendment 1
TC 46 Information and documentationISO/CD TR 17068
Information and documentation — Records Management — The Trusted Third Party Re-pository for Electronic Records
TC 58 Gas cylindersISO/CD 12209 Gas cylinders — Outlet connections for gas
cylinder valves for compressed breathable air
TC 61 PlasticsISO/CD 16620 Plastics — Determination of the biomass
carbon ratio in plastic products and their components
ISO/CD 16525-1
Adhesives — Test methods for isotropically electrically conducting adhesives — Part 1: General test methods
ISO/CD 16525-2
Adhesives — Test methods for isotropically electrically conducting adhesives — Part 2: Electrical characteristics
ISO/CD 16525-3
Adhesives — Test methods for isotropically electrically conducting adhesives — Part 3: Heat transfer properties
TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries
ISO/CD 13628-7
Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems
TC 70 Internal combustion enginesISO/CD 4548-15
Methods of test for full-flow lubricating oil fil-ters for internal combustion engines — Part 15: Vibration fatigue test with composite materials
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 11665-9
Measurement of radioactivity in the environ-ment — Air — Part 9: Radon-222: determina-tion method of the radon exhalation rate of dense building materials
ISO/CD 18589-7
Measurement of radioactivity in the environ-ment - Soil — Part 7: Portable in situ gamma spectrometry measurement
TC 92 Fire safetyISO/CD 19701 Methods for sampling and analysis of fire
effluents
ISO/DTR 26368
Guidance on containment systems for the pre-vention of pollution arising from uncontrolled fire water run-off
TC 98 Bases for design of structuresISO/CD 13033 Seismic actions on nonstructural components
TC 108 Mechanical vibration, shock and condi-tion monitoring
ISO/CD 16063-16
Methods for the calibration of vibration and shock transducers — Part 16: Calibration by Earth's gravitation
4 ISO Update, Supplement to ISO Focus -- February 2011
TC 123 Plain bearings
ISO/CD 3548-3 Plain bearings — Thin-walled half bearings with or without flange — Part 3: Measurement of peripheral length
TC 130 Graphic technology
ISO/CD 15339-1
Graphic technology — Printing of digital data — Part 1: Basic principles
TC 131 Fluid power systems
ISO/DTS 15640
Hydraulic fluid power contamination control — General principles and guidelines for selection and application of hydraulic filters
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/CD 16486-1
Plastics piping systems for the supply of gase-ous fuels - Polyamide (PA) piping systems with fusion jointing and mechanical jointing — Part 1: General
ISO/CD 16486-2
Plastics piping systems for the supply of gase-ous fuels - Polyamide (PA) piping systems with fusion jointing and mechanical jointing — Part 2: Pipes
ISO/CD 16486-3
Plastics piping systems for the supply of gase-ous fuels - Polyamide (PA) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
ISO/CD 16486-5
Plastics piping systems for the supply of gase-ous fuels - Polyamide (PA) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system
ISO/CD 16486-6
Plastics piping systems for the supply of gase-ous fuels - Polyamide (PA) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation
TC 147 Water quality
ISO/CD 13163-1
Water quality — Measurement of lead 210 activity concentration — Part 1: Liquid scintilla-tion counting method
ISO/CD 15923 Water quality — Determination of ammonium, chloride, nitrate, nitrite, orthophosphate, sili-cate and sulfate by a discrete analysis system and spectrophotometric detection
ISO/DTS 12869
Water quality — Detection and quantification of Legionella and/or Legionella pneumophila by concentration and genic amplification by polymerase chain reaction (RT-PCR)
TC 172 Optics and photonics
ISO/CD 8600-7 Endoscopes — Medical endoscopes and endotherapy devices — Part 7: Basic require-ments for medical endoscopes of water-resistant type
TC 190 Soil quality
ISO/CD 28258 Soil quality — Recording and exchange of soil-related data
ISO/CD 16727 Soil quality — Determination of mercury in aqua regia and nitric acid digests — Cold vapour atomic fluorescence spectrometry (CVAFS)
ISO/CD 16729 Soil quality — Digestion of nitric acid soluble fractions of elements
ISO/CD 16965 Soil quality — Determination of trace elements using inductively coupled plasma mass spec-trometry (ICP-MS)
ISO/CD 17073 Soil quality — Determination of trace elements in aqua regia and nitric acid digests — Graph-ite furnace atomic absorption spectrometry method (GFAAS)
TC 201 Surface chemical analysis
ISO/CD 13424 Surface chemical analysis — X-ray photoelec-tron spectroscopy — Reporting of results for thin film analysis
TC 204 Intelligent transport systems
ISO/DTS 24533
Intelligent transport systems - Data dictionary and message set to facilitate the movement of freight and its intermodal transfer - road transport information exchanges for supply chain freight time-sensitive delivery (Road-Air Freight-Road)
TC 206 Fine ceramics
ISO/CD 13383-1
Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural charac-terisation — Part 1: Determination of grain size and size distribution
ISO/CD 13383-2
Fine ceramics (advanced ceramics, advanced technical ceramics) — Microstructural char-acterisation — Part 2: Determination of phase volume fraction by evaluation of micrographs
ISO/CD 14603 Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for open hole tension of continuous fiber-reinforced ce-ramic matrix composites at room temperature
ISO/CD 22197-4
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 4: Removal of formaldehyde
ISO/CD 22197-5
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 5: Removal of methyl mercaptan
Geographic information - Reference model — Part 1: Fundamentals
ISO/CD 19115-1
Geographic information — Metadata — Part 1: Fundamentals
ISO/CD 19135-2
Geographic information - Procedures for item registration — Part 2: XML Schema Implementation
TC 219 Floor coverings
ISO/CD 16581 Resilient Floor Covering — Determination of the effect of simulated movement of a furniture leg
TC 223 Societal Security
ISO/CD 22398 Societal security - Guidelines for exercises and testing
TC 229 Nanotechnologies
ISO/DTS 80004-4
Nanotechnologies — Vocabulary — Part 4: Nanostructured materials
JTC 1 Information technology
ISO/IEC CD 25041
Systems and software engineering — Systems and software Quality Requirements and Evalu-ation (SQuaRE) — Evaluation modules
ISO/IEC CD 29169
Information technology — The application of conformity assessment methodology to pro-cess capability and organizational maturity
ISO/IEC PDTR 90003
Software engineering — Guidelines for the application of ISO 9001:2000 to computer software
ISO/IEC CD 27037
Guidelines for identification, collection, acqui-sition and preservation of digital evidence
ISO Update, Supplement to ISO Focus -- February 2011 5
ISO/IEC CD 29192-3
Information technology — Security techniques — Lightweight cryptography — Part 3: Stream ciphers
ISO/IEC CD 14496-28
Information technology — Coding of audio-visual objects — Part 28: Composite font representation
ISO/IEC CD 24730-2
Information technology — Automatic and identification for data capture techniques — Real-time locating systems (RTLS) — Part 2: 2,4 GHz air interface protocol
ISO/IEC CD 24730-21
Information technology — Real-time locating systems (RTLS) — Part 21: SO/IEC 24730-2 transmitters operating with a single spread code and employing a DBPSK data encoding and BPSK spreading scheme
ISO/IEC CD 24730-22
Information technology — Real-time locating systems (RTLS) — Part 22: ISO/IEC 24730-2 transmitters operating with multiple spread codes and employing a QPSK data encoding and Walsh offset QPSK (WOQPSK) spreading scheme
ISO/IEC 19794-6:2005/PDAM 1
Information technology — Biometric data interchange formats — Part 6: Iris image data — Amendment 1: Conformance testing methodology
ISO/IEC PDTR 29156
Guidance for specifying performance require-ments to meet security & usability needs in applications using biometrics
DIS circulated
Period from 01 January to 31 January 2011
These documents have obtained substantial support within the ap-propriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 2 Fasteners
ISO/DIS 10509 * Hexagon flange head tapping screws
2011-06-25
(Revision of ISO 10509:1992)
TC 6 Paper, board and pulps
ISO/DIS 1974 * Paper — Determination of tearing resistance (Elmendorf method)
* Ships and marine technology - Risk assessment on anti-fouling systems on ships — Part 1: Marine environmental risk asse-ment method of biocidally active substances used for anti-fouling systems on ships
2011-06-06
ISO/DIS 3730 * Shipbuilding and marine struc-tures — Mooring winches
2011-06-18
(Revision of ISO 3730:1988)
ISO/DIS 7365 * Shipbuilding and marine struc-tures — Deck machinery — Tow-ing winches for deep sea use
2011-06-18
(Revision of ISO 7365:1983)
ISO/DIS 14859 * Ships and marine technology - Sound reception systems
2011-06-18
TC 17 Steel
ISO/DIS 9364 Continuous hot-dip 55 % alu-minium/zinc alloy-coated steel sheet of commercial, drawing and structural qualities
ISO/DIS 15211 Continuous hot-dip zinc-coated twin-roll cast steel sheet of structural quality and high strength steel
2011-06-22
ISO/DIS 15698-1.2
* Steel for the reinforcement of concrete — Headed bars — Part 1: Requirements
2011-03-06
ISO/DIS 15698-2.2
* Steel for the reinforcement of concrete — Headed bars — Part 2: Test methods
2011-03-06
TC 20 Aircraft and space vehicles
ISO/DIS 15889 * Space data and information transfer systems — The data description language EAST specification
2011-06-06
(Revision of ISO 15889:2003)
ISO/DIS 16919 * Space data and information transfer systems - Requirements for bodies providing audit and certification of candidate trust-worthy digital repositories
2011-06-19
ISO/DIS 26871 * Space systems — Explosive sys-tems and devices
2011-06-29
TC 21 Equipment for fire protec-tion and fire fighting
ISO/DIS 7240-5
* Fire detection and alarm sys-tems — Part 5: Point-type heat detectors
2011-06-06
(Revision of ISO 7240-5:2003, ISO 7240-5:2003/Cor 1:2005)
ISO/DIS 6182-2
Fire protection — Automatic sprinkler systems — Part 2: Re-quirements and test methods for wet alarm valves, retard cham-bers and water motor alarms
2011-06-28
(Revision of ISO 6182-2:2005)
ISO/DIS 6182-3
Fire protection — Automatic sprinkler systems — Part 3: Requirements and test methods for dry pipe valves
2011-06-28
(Revision of ISO 6182-3:2005)
ISO/DIS 6182-5
Fire protection — Automatic sprinkler systems — Part 5: Requirements and test methods for deluge valves
ISO/DIS 17653 * Resistance welding — Destruc-tive tests on welds in metallic materials — Torsion test of resistance spot welds
2011-06-07
(Revision of ISO 17653:2003)
ISO 5172:2006/DAmd 1
* Gas welding equipment — Blow-pipes for gas welding, heating and cutting — Specifications and tests — Amendment 1
2011-06-14
TC 45 Rubber and rubber products
ISO 9924-2:2000/DAmd 1
Rubber and rubber products — Determination of the composi-tion of vulcanizates and uncured compounds by thermogravim-etry — Part 2: Acrylonitrile-butadiene and halobutyl rubbers — Amendment 1
ments for message authentica-tion using symmetric techniques
2011-06-06
(Revision of ISO 16609:2004)
TC 70 Internal combustion engines
ISO/DIS 8178-9
* Reciprocating internal combus-tion engines — Exhaust emission measurement — Part 9: Test cy-cles and test procedures for test bed measurement of exhaust gas smoke emissions from com-pression ignition engines operat-ing under transient conditions
2011-06-19
(Revision of ISO 8178-9:2000, ISO 8178-9:2000/Amd 1:2004)
TC 79 Light metals and their alloys
ISO/DIS 6362-1
* Wrought aluminium and alu-minium alloys — Extruded rods/bars, tubes and profiles — Part 1: Technical conditions for inspection and delivery
2011-06-18
(Revision of ISO 6362-1:1986)
ISO/DIS 6362-2
* Wrought aluminium and alu-minium alloys — Extruded rods/bars, tubes and profiles — Part 2: Mechanical properties
2011-06-18
(Revision of ISO 6362-2:1990)
ISO/DIS 6362-3
* Wrought aluminium and alu-minium alloys — Extruded rods/bars, tubes and profiles — Part 3: Extruded rectangular bars — Tolerances on shape and dimensions
2011-06-18
(Revision of ISO 6362-3:2001)
ISO/DIS 6362-4
* Wrought aluminium and alu-minium alloys — Extruded rods/bars, tubes and profiles — Part 4: Profiles — Tolerances on shape and dimensions
2011-06-18
(Revision of ISO 6362-4:1988)
ISO/DIS 6362-5
* Wrought aluminium and alu-minium alloys — Extruded rods/bars, tubes and profiles — Part 5: Round, square and hexagonal bars — Tolerances on shape and dimensions
2011-06-18
(Revision of ISO 6362-5:2001)
ISO Update, Supplement to ISO Focus -- February 2011 7
ISO/DIS 6362-6
* Wrought aluminium and alumini-um alloys — Extruded rods/bars, tubes and profiles — Part 6: Round, square, rectangular and hexagonal tubes — Tolerances on shape and dimensions
2011-06-18
ISO/DIS 6362-7
* Wrought aluminium and alu-minium alloys — Extruded rods/bars, tubes and profiles — Part 7: Chemical composition
2011-06-18
ISO/DIS 6363-1
* Wrought aluminium and alu-minium alloy cold-drawn rods/bars, tubes and wires — Part 1: Technical conditions for inspec-tion and delivery
2011-06-18
(Revision of ISO 6363-1:1988, ISO 6365-1:1988)
ISO/DIS 6363-2
* Wrought aluminium and alu-minium alloy cold-drawn rods/bars and tubes and wires — Part 2: Mechanical properties
2011-06-18
(Revision of ISO 6363-2:1993)
ISO/DIS 6363-3
* Wrought aluminium and alu-minium alloy cold-drawn rods/bars, tubes and wires — Part 3: Drawn round bars and wires — Tolerances on form and dimen-sions (symmetric plus and minus tolerances on diameter)
2011-06-18
(Revision of ISO 5193:1981)
ISO/DIS 6363-4
* Wrought aluminium and alu-minium alloy cold-drawn rods/bars, tubes and wires — Part 4: Drawn rectangular bars and wires — Tolerances on form and dimensions
2011-06-18
(Revision of ISO 6363-4:1991)
ISO/DIS 6363-5
* Wrought aluminium and alu-minium alloy cold-drawn rods/bars, tubes and wires — Part 5: Drawn square and hexagonal bars — Tolerances on form and dimensions
2011-06-18
(Revision of ISO 6363-5:1992)
ISO/DIS 6363-6
* Wrought aluminium and alu-minium alloy cold-drawn rods/bars and tubes — Part 6: Drawn round tubes — Tolerances on form and dimensions
2011-06-18
TC 85 Nuclear energy, nuclear technologies, and radio-logical protection
ISO/DIS 20785-1
* Dosimetry for exposures to cos-mic radiation in civilian aircraft — Part 1: Conceptual basis for measurements
2011-06-19
(Revision of ISO 20785-1:2006)
TC 94 Personal safety -- Pro-tective clothing and equipment
ISO/DIS 12311 * Personal protective equipment — Test methods for sunglasses and related equipment
2011-06-21
ISO/DIS 12609-1
* Eyewear for protection against intense light sources used on hu-mans and animals for cosmetic and medical applications — Part 1: Specification for products
2011-06-16
ISO/DIS 12609-2
* Eyewear for protection against intense light sources used on hu-mans and animals for cosmetic and medical applications — Part 2: Guidance for use
2011-06-16
TC 106 Dentistry
ISO/DIS 12836 * Dentistry — Digitizing devices used in CAD/CAM systems — Test methods for assessing the accuracy and precision
2011-06-28
ISO/DIS 13017 * Dentistry — Magnetic attachments
2011-06-21
ISO/DIS 13504 * Dentistry — General require-ments for instruments and re-lated accessories used in dental implant placement and treatment
2011-06-14
ISO/DIS 21672-1
* Dentistry — Periodontal probes — Part 1: General requirements
2011-06-21
ISO/DIS 21672-2
* Dentistry — Periodontal probes — Part 2: Designation
2011-06-14
ISO/DIS 20126.2
* Dentistry — Manual toothbrush-es — General requirements and test methods
2011-03-21
(Revision of ISO 20126:2005)
TC 108 Mechanical vibration, shock and condition monitoring
ISO/DIS 18312-2
* Mechanical vibration and shock — Measurement of vibration power flow from machines into connected support structures — Part 2: Indirect method
2011-06-14
ISO/DIS 18436-1
* Condition monitoring and di-agnostics of machines — Re-quirements for qualification and assessment of personnel — Part 1: Requirements for assessment bodies and the assessment process
2011-06-06
(Revision of ISO 18436-1:2004, ISO 18436-1:2004/Cor 1:2006)
ISO/DIS 18436-2
* Condition monitoring and di-agnostics of machines — Re-quirements for qualification and assessment of personnel — Part 2: Vibration condition monitoring
2011-06-14
(Revision of ISO 18436-2:2003)
TC 122 Packaging
ISO/DIS 13274 * Packaging — Transport packag-ing for dangerous goods — Plastics compatibility testing for packaging and IBCs
2011-06-07
TC 131 Fluid power systems
ISO/DIS 21017 * Hydraulic fluid power - Cleanli-ness of parts and components - Expression of level of particulate contamination
ISO/DIS 16826 * Non-destructive testing — Ultra-sonic testing — Examination for discontinuities perpendicular to the surface
2011-06-25
ISO/DIS 16827 * Non-destructive testing — Ultra-sonic testing — Characterization and sizing of discontinuities
2011-06-25
8 ISO Update, Supplement to ISO Focus -- February 2011
ISO/DIS 16828 * Non-destructive testing — Ultrasonic testing — Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
2011-06-25
ISO/DIS 16831 * Non-destructive testing — Ultra-sonic testing — Characterization and verification of ultrasonic thickness measuring equipment
2011-06-25
TC 142 Cleaning equipment for air and other gases
ISO/DIS 10121-2
* Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 2: Gas phase air cleaning devices (GPACD)
2011-06-21
TC 145 Graphical symbolsISO/DIS 3864-3
* Graphical symbols — Safety colours and safety signs — Part 3: Design principles for graphical symbols for use in safety signs
2011-06-12
(Revision of ISO 3864-3:2006)
TC 146 Air qualityISO/DIS 12219-2
* Indoor air of road vehicles — Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Bag method
2011-06-21
TC 147 Water qualityISO 6107-2:2006/DAmd 1
* Water quality — Vocabulary — Part 2: — Amendment 1
2011-06-14
TC 150 Implants for surgeryISO 14630:2008/DAmd 1
* Non-active surgical implants — General requirements — Amend-ment 1
2011-06-21
ISO/DIS 13175-3
* Implants for surgery — Calcium phosphates — Part 3: Hydroxya-patite and beta-tricalcium phos-phate bone substitutes
2011-06-21
ISO/DIS 25832-1
* Implants for surgery — Seamless tubes for surgical implants — Part 1: Materials based on iron
2011-06-29
ISO/DIS 9714-1
* Orthopaedic drilling instruments — Part 1: Drill bits, taps and countersink cutters
2011-06-14
(Revision of ISO 9714-1:1991)
TC 156 Corrosion of metals and alloys
ISO/DIS 17752 Corrosion of metals and alloys — Procedures to determine and estimate runoff rates of metals from materials as a result of atmospheric corrosion
* Industrial automation systems and integration — Physical device control — Data model for computerized numerical control-lers — Part 13: Process data for wire electrical discharge machin-ing (wire-EDM)
2011-06-20
ISO/DIS 14649-14
* Industrial automation systems and integration — Physical device control — Data model for computerized numerical control-lers — Part 14: Process data for sink electrical discharge machin-ing (sink-EDM)
2011-06-20
TC 188 Small craft
ISO/DIS 16180 * Small craft — Navigation lights — Installation and placement
2011-06-14
ISO/DIS 25197 * Small craft — Electrical/electron-ic control system for steering, shift and throttle
2011-06-21
TC 197 Hydrogen technologies
ISO/DIS 14687-2
* Hydrogen fuel — Product specification — Part 2: Proton exchange membrane (PEM) fuel cell applications for road vehicles
2011-06-06
(Revision of ISO/TS 14687-2:2008)
TC 207 Environmental management
ISO/DIS 14045 * Environmental management — Eco-efficiency assessment of product systems — Principles, requirements and guidelines
2011-06-21
TC 211 Geographic information/Geomatics
ISO/DIS 19152 * Geographic information — Land Administration Domain Model (LADM)
2011-06-21
TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO/DIS 15189 * Medical laboratories — Re-quirements for quality and competence
2011-06-07
(Revision of ISO 15189:2007)
ISO Update, Supplement to ISO Focus -- February 2011 9
ISO/DIS 15197 * In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
2011-06-28
(Revision of ISO 15197:2003)
TC 215 Health informaticsISO/DIS 13119 * Health informatics — Clini-
ISO/DIS 12931 * Performance criteria for authen-tication solutions for anti-coun-terfeiting in the field of material goods
2011-06-14
CASCO Committee on conformity assessment
ISO/IEC DIS 17020
* Conformity assessment — Gen-eral criteria for the operation of various types of bodies perform-ing inspection
2011-06-14
(Revision of ISO/IEC 17020:1998)
JTC 1 Information technologyISO/IEC DIS 9834-1
Information technology — Open Systems Interconnection — Pro-cedures for the operation of OSI Registration Authorities: General procedures and top arcs of the International Object Identifier tree — Part 1:
2011-06-22
(Revision of ISO/IEC 9834-1:2008)
ISO/IEC DIS 13156
Information technology — Tel-ecommunications and informa-tion exchange between systems — High rate 60 GHz PHY, MAC and PALs
2011-06-28
(Revision of ISO/IEC 13156:2009)
ISO/IEC DIS 18052
Information technology — Tel-ecommunications and informa-tion exchange between systems — Protocol for Computer Supported Telecommunications Applications (CSTA) Phase III
2011-06-28
(Revision of ISO/IEC 18052:2000)
ISO/IEC DIS 16963
Information technology — Digi-tally recorded media for informa-tion interchange and storage — Test method for the estimation of lifetime of optical media for long-term data storage
2011-07-01
ISO/IEC DIS 28360
Information technology — Office equipment — Determination of chemical emission rates from electronic equipment
2011-06-28
(Revision of ISO/IEC 28360:2007, ISO/IEC 28360:2007/Cor 1:2008)
ISO/IEC DIS 19785-2
Information technology — Common Biometric Exchange Formats Framework — Part 2: Procedures for the operation of the Biometric Registration Authority
2011-05-25
(Revision of ISO/IEC 19785-2:2006, ISO/IEC 19785-2:2006/Amd 1:2010)
FDIS circulated
Period from 01 January to 31 January 2011
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Quantities and units — Part 9: Physical chemistry and molecu-lar physics — Amendment 1
2011-03-12
TC 17 Steel
ISO/FDIS 9328-1
* Steel flat products for pressure purposes — Technical delivery conditions — Part 1: General requirements
2011-03-21
(Revision of ISO 9328-1:2003)
ISO/FDIS 9328-2
* Steel flat products for pressure purposes — Technical delivery conditions — Part 2: Non-alloy and alloy steels with specified elevated temperature properties
2011-03-21
(Revision of ISO 9328-2:2004)
ISO/FDIS 9328-3
* Steel flat products for pressure purposes — Technical delivery conditions — Part 3: Weldable fine grain steels, normalized
2011-03-21
(Revision of ISO 9328-3:2004, ISO 9328-3:2004/DAmd 1)
ISO/FDIS 9328-4
* Steel flat products for pressure purposes — Technical delivery conditions — Part 4: Nickel-alloy steels with specified low temperature properties
2011-03-21
(Revision of ISO 9328-4:2004, ISO 9328-4:2004/DAmd 1)
ISO/FDIS 9328-5
* Steel flat products for pressure purposes — Technical delivery conditions — Part 5: Weldable fine grain steels, thermomechan-ically rolled
2011-03-21
(Revision of ISO 9328-5:2004, ISO 9328-5:2004/DAmd 1)
ISO/FDIS 9328-6
* Steel flat products for pressure purposes — Technical delivery conditions — Part 6: Weldable fine grain steels, quenched and tempered
2011-03-21
(Revision of ISO 9328-6:2004, ISO 9328-6:2004/DAmd 1)
ISO/FDIS 9328-7
* Steel flat products for pressure purposes — Technical delivery conditions — Part 7: Stainless steels
2011-03-21
(Revision of ISO 9328-7:2004)
10 ISO Update, Supplement to ISO Focus -- February 2011
TC 23 Tractors and machinery for agriculture and forestry
ISO/FDIS 11783-5
* Tractors and machinery for agriculture and forestry — Se-rial control and communications data network — Part 5: Network management
2011-03-15
(Revision of ISO 11783-5:2001, ISO 11783-5:2001/Cor 1:2002)
ISO/FDIS 14223-1
* Radiofrequency identification of animals — Advanced transpond-ers — Part 1: Air interface
2011-03-08
(Revision of ISO 14223-1:2003, ISO 14223-1:2003/CD Amd 1)
TC 28 Petroleum products and lubricants
ISO/FDIS 20884
* Petroleum products — Deter-mination of sulfur content of automotive fuels — Wavelength-dispersive X-ray fluorescence spectrometry
2011-03-21
(Revision of ISO 20884:2004)
TC 34 Food products
ISO/FDIS 3720 * Black tea — Definition and basic requirements
2011-04-01
(Revision of ISO 3720:1986, ISO 3720:1986/Cor 1:1992, ISO 3720:1986/Cor 2:2004)
TC 35 Paints and varnishes
ISO/FDIS 29601
* Paints and varnishes — Cor-rosion protection by protective paint systems — Assessment of porosity in a dry film
2011-03-14
TC 38 Textiles
ISO/FDIS 3759 * Textiles — Preparation, mark-ing and measuring of fabric specimens and garments in tests for determination of dimensional change
2011-03-28
(Revision of ISO 3759:2007)
TC 39 Machine tools
ISO/FDIS 230-10
* Test code for machine tools — Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
2011-03-22
TC 44 Welding and allied processes
ISO/FDIS 15792-3
* Welding consumables — Test methods — Part 3: Classifica-tion testing of positional capacity and root penetration of welding consumables in a fillet weld
2011-04-14
(Revision of ISO 15792-3:2000, ISO 15792-3:2000/Cor 1:2006)
ISO/FDIS 18275
* Welding consumables — Cov-ered electrodes for manual metal arc welding of high-strength steels — Classification
2011-03-18
(Revision of ISO 18275:2005, ISO 18275:2005/Cor 1:2007)
TC 45 Rubber and rubber products
ISO 7751:1991/FDAmd 1
* Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to maximum working pressure — Amendment 1: Replacement of "design working pressure" by "maximum working pressure" throughout text
2011-03-28
TC 58 Gas cylinders
ISO/FDIS 7866 * Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing
2011-03-14
(Revision of ISO 7866:1999)
TC 61 Plastics
ISO/FDIS 6721-1
* Plastics — Determination of dynamic mechanical properties — Part 1: General principles
2011-04-21
(Revision of ISO 6721-1:2001, ISO 6721-1:2001/DAmd 1)
ISO/FDIS 10927
* Plastics — Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
2011-03-14
ISO/FDIS 294-5
* Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Prepara-tion of standard specimens for investigating anisotropy
2011-03-20
(Revision of ISO 294-5:2001, ISO 294-5:2001/Amd 1:2004, ISO 294-5:2001/Cor 1:2003)
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/FDIS 10414-2
* Petroleum and natural gas indus-tries — Field testing of drilling fluids — Part 2: Oil-based fluids
2011-03-28
(Revision of ISO 10414-2:2002)
TC 89 Wood-based panels
ISO/FDIS 10033-1
* Laminated Veneer Lumber (LVL) — Bonding quality — Part 1: Test methods
TC 94 Personal safety -- Pro-tective clothing and equipment
ISO/FDIS 27065
* Protective clothing — Perfor-mance requirements for protec-tive clothing worn by operators applying liquid pesticides
2011-03-21
TC 106 Dentistry
ISO 21671:2006/FDAmd 1
* Dentistry — Rotary polishers — Amendment 1
2011-03-28
TC 108 Mechanical vibration, shock and condition monitoring
ISO/FDIS 18437-5
* Mechanical vibration and shock — Characterization of the dy-namic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on compari-son between measurements and finite element analysis
2011-03-26
ISO/FDIS 29821-1
* Condition monitoring and diagnostics of machines — Ultrasound — Part 1: General guidelines
2011-04-01
ISO Update, Supplement to ISO Focus -- February 2011 11
TC 118 Compressors and pneu-matic tools, machines and equipment
ISO/FDIS 28927-10
* Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 10: Percussive drills, hammers and breakers
2011-03-21
(Revision of ISO 8662-2:1992, ISO 8662-3:1992, ISO 8662-5:1992, ISO 8662-2:1992/Amd 1:1999, ISO 8662-3:1992/Amd 1:1999, ISO 8662-5:1992/Amd 1:1999)
TC 120 LeatherISO/FDIS 14930
* Leather — Leather for dress gloves — Specification
2011-03-13
TC 123 Plain bearingsISO/FDIS 4384-2
* Plain bearings — Hardness test-ing of bearing metals — Part 2: Solid materials
2011-03-21
(Revision of ISO 4384-2:1982)
TC 131 Fluid power systemsISO/FDIS 16589-1
* Rotary shaft lip-type seals incor-porating thermoplastic sealing elements — Part 1: Nominal dimensions and tolerances
2011-03-18
(Revision of ISO 16589-1:2001)
ISO/FDIS 16589-3
* Rotary shaft lip-type seals incor-porating thermoplastic sealing elements — Part 3: Storage, handling and installation
2011-03-18
(Revision of ISO 16589-3:2001)
ISO/FDIS 16589-4
* Rotary shaft lip-type seals incor-porating thermoplastic sealing elements — Part 4: Performance test procedures
2011-03-18
(Revision of ISO 16589-4:2001)
ISO/FDIS 16589-5
* Rotary shaft lip-type seals incor-porating thermoplastic sealing elements — Part 5: Identification of visual imperfections
2011-03-18
(Revision of ISO 16589-5:2001)
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO 21003-2:2008/FDAmd 1
* Multilayer piping systems for hot and cold water installations inside buildings — Part 2: Pipes — Amendment 1
2011-03-28
ISO/FDIS 21751
* Plastics pipes and fittings — Decohesion test of electrofusion assemblies — Strip-bend test
2011-03-07
TC 145 Graphical symbolsISO/FDIS 3864-1
* Graphical symbols — Safety colours and safety signs — Part 1: Design principles for safety signs and safety markings
2011-03-20
(Revision of ISO 3864-1:2002)
ISO 7010:2003/FDAmd 78
* Graphical symbols — Safety colours and safety signs — Safety signs used in workplaces and public areas — Amendment 78: Safety sign M025: Protect infants' eyes with opaque eye protection
2011-03-18
ISO 7010:2003/FDAmd 79
* Graphical symbols — Safety col-ours and safety signs — Safety signs used in workplaces and public areas — Amendment 79: Safety sign M026: Use protective apron
2011-03-18
ISO 7010:2003/FDAmd 81
* Graphical symbols — Safety col-ours and safety signs — Safety signs used in workplaces and public areas — Amendment 81: Safety sign P031: Do not alter the state of the switch
2011-03-18
ISO 7010:2003/FDAmd 82
* Graphical symbols — Safety col-ours and safety signs — Safety signs used in workplaces and public areas — Amendment 82: Safety sign P032: Do not use for face grinding
2011-03-18
TC 146 Air quality
ISO/FDIS 25139
* Stationary source emissions — Manual method for the determination of the meth-ane concentration using gas chromatography
2011-03-14
TC 147 Water quality
ISO/FDIS 28540
* Water quality — Determination of 16 polycyclic aromatic hydrocar-bons (PAH) in water — Method using gas chromatography with mass spectrometric detection (GC-MS)
2011-03-13
ISO/FDIS 5667-13
* Water quality — Sampling — Part 13: Guidance on sampling of sludges
2011-04-04
(Revision of ISO 5667-13:1997)
TC 150 Implants for surgery
ISO/FDIS 7206-2
* Implants for surgery — Partial and total hip joint prostheses — Part 2: Articulating surfaces made of metallic, ceramic and plastics materials
2011-03-08
(Revision of ISO 7206-2:1996)
TC 157 Non-systemic contra-ceptives and STI barrier prophylactics
ISO/FDIS 25841
* Female condoms — Require-ments and test methods
2011-03-14
ISO/FDIS 29942
* Prophylactic dams — Require-ments and test methods
* Optics and photonics — Test methods for surface imperfec-tions on optical elements
2011-03-26
(Revision of ISO 14997:2003)
ISO/FDIS 13212
* Ophthalmic optics — Contact lens care products — Guidelines for determination of shelf-life
2011-04-21
(Revision of ISO 13212:1999)
ISO/FDIS 14534
* Ophthalmic optics — Contact lenses and contact lens care products — Fundamental requirements
2011-03-07
(Revision of ISO 14534:2002)
TC 184 Automation systems and integration
ISO/FDIS 10218-1
* Robots and robotic devices — Safety requirements — Part 1: Industrial robots
2011-03-21
(Revision of ISO 10218-1:2006, ISO 10218-1:2006/Cor 1:2007)
12 ISO Update, Supplement to ISO Focus -- February 2011
ISO/FDIS 10218-2.2
* Robots and robotic devices — Safety requirements — Part 2: Industrial robot systems and integration
2011-03-21
TC 190 Soil qualityISO/FDIS 22155
* Soil quality — Gas chromato-graphic determination of volatile aromatic and halogenated hy-drocarbons and selected ethers — Static headspace method
2011-03-05
(Revision of ISO 22155:2005)
TC 198 Sterilization of health care products
ISO/FDIS 15883-6
* Washer-disinfectors — Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-inva-sive, non-critical medical devices and healthcare equipment
2011-03-21
TC 205 Building environment design
ISO/FDIS 14908-1
* Interconnection of information technology equipment — Con-trol Network Protocol — Part 1: Protocol Stack
2011-03-05
ISO/FDIS 14908-2
* Interconnection of information technology equipment — Con-trol Network Protocol — Part 2: Twisted-pair communication
2011-03-05
ISO/FDIS 14908-3
* Interconnection of information technology equipment — Con-trol Network Protocol — Part 3: Power line channel specification
2011-03-05
ISO/FDIS 14908-4
* Interconnection of information technology equipment — Control Network Protocol — Part 4: IP communication
2011-03-05
TC 207 Environmental management
ISO/FDIS 14066
* Greenhouse gases — Compe-tence requirements for green-house gas validation teams and verification teams
2011-03-18
TC 213 Dimensional and geometri-cal product specifications and verification
ISO 1101:2004/FDAmd 1
* Geometrical Product Specifica-tions (GPS) — Geometrical tol-erancing — Tolerances of form, orientation, location and run-out — Amendment 1: Representa-tion of specifications in the form of a 3D model
2011-03-14
ISO/FDIS 10360-7
* Geometrical product specifica-tions (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMMs) — Part 7: CMMs equipped with imaging probing systems
2011-03-07
ISO/FDIS 13385-1
* Geometrical product specifica-tions (GPS) — Dimensional measuring equipment — Part 1: Callipers; Design and metrologi-cal characteristics
2011-03-28
(Revision of ISO 3599:1976, ISO 6906:1984)
ISO/FDIS 13385-2
* Geometrical product specifica-tions (GPS) — Dimensional measuring equipment — Part 2: Calliper depth gauges; Design and metrological characteristics
2011-03-28
(Revision of ISO 3599:1976, ISO 6906:1984)
ISO/FDIS 14253-2
* Geometrical product specifica-tions (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 2: Guidance for the estimation of uncertainty in GPS measure-ment, in calibration of measur-ing equipment and in product verification
2011-03-14
(Revision of ISO/TS 14253-2:1999, ISO/TS 14253-2:1999/Cor 1:2007)
ISO/FDIS 14253-3
* Geometrical product specifica-tions (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 3: Guidelines for achieving agreements on measurement uncertainty statements
2011-03-14
(Revision of ISO/TS 14253-3:2002)
ISO/FDIS 16610-21
* Geometrical product specifica-tions (GPS) — Filtration — Part 21: Linear profile filters: Gauss-ian filters
2011-04-02
(Revision of ISO 11562:1996)
TC 215 Health informatics
ISO/FDIS 18308
* Health informatics — Require-ments for an electronic health record architecture
2011-03-26
(Revision of ISO/TS 18308:2004)
TC 221 Geosynthetics
ISO/FDIS 10773
* Clay geosynthetic barriers — Determination of permeability to gases
2011-03-28
TMB Technical Management Board
ISO/IEC FDIS 80079-34
Explosive atmospheres — Part 34: Application of quality sys-tems for equipment manufacture
2011-03-26
JTC 1 Information technology
ISO/IEC FDIS 29103
* Information technology — Office equipment — Colour photo test pages for measurement of ink cartridge yield for colour photo printing
2011-04-01
ISO/IEC 14492:2001/FDAmd 3
* Information technology — Lossy/lossless coding of bi-level im-ages — Amendment 3: Exten-sion to colour coding
2011-03-05
ISO/IEC FDIS 14496-25
* Information technology — Cod-ing of audio-visual objects — Part 25: 3D Graphics Compres-sion Model
2011-04-01
(Revision of ISO/IEC 14496-25:2009, ISO/IEC 14496-25:2009/DAM 1)
ISO/IEC FDIS 23005-1
* Information technology — Media context and control — Part 1: Architecture
2011-03-07
ISO Update, Supplement to ISO Focus -- February 2011 13
Standards published
New International Standards published between 01 January and 31 January 2011
* Available in English only
** French version of standard previously published in English only
Price group
TC 6 Paper, board and pulps
ISO 5264-2:2011
Pulps — Laboratory beating — Part 2: PFI mill method
F
TC 10 Technical product documentation
ISO 12756:1998/Amd 1:2011
* Drawing and writing instruments — Ball point pens and roller ball pens — Vocabulary — Amendment 1: Viscosity of the writing fluid
XZ
TC 17 Steel
ISO 3575:2011 * Continuous hot-dip zinc-coated carbon steel sheet of commercial and drawing qualities
H
ISO 4998:2011 * Continuous hot-dip zinc-coated carbon steel sheet of structural quality
G
ISO 4999:2011 * Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial, drawing and structural qualities
K
ISO 5000:2011 * Continuous hot-dip aluminium-silicon-coated cold-reduced carbon steel sheet of commercial and drawing qualities
ISO 7116:2011 * Mopeds — Measurement method for determining maximum speed
J
TC 25 Cast irons and pig irons
ISO/TR 945-2:2011
Microstructure of cast irons — Part 2: Graphite classification by image analysis
G
TC 28 Petroleum products and lubricants
ISO 3405:2011 * Petroleum products — Determination of distillation characteristics at atmos-pheric pressure
R
ISO 3987:2010/Cor 1:2011
* Petroleum products — Determination of sulfated ash in lubricating oils and additives — Technical Corrigendum 1
free
ISO 20783-1:2011
* Petroleum and related products — Determination of emulsion stability of fire-resistant fluids — Part 1: Fluids in category HFAE
D
ISO 20843:2011
Petroleum and related products — Determination of pH of fire-resistant fluids within categories HFAE, HFAS and HFC
B
TC 34 Food products
ISO/TS 11133-2:2003/Amd 1:2011
Microbiology of food and animal feed-ing stuffs — Guidelines on prepara-tion and production of culture media — Part 2: Practical guidelines on performance testing of culture media — Amendment 1: Test microorganisms for commonly used culture media
XZ
ISO 3656:2011 Animal and vegetable fats and oils — Determination of ultraviolet absorbance expressed as specific UV extinction
D
TC 35 Paints and varnishes
ISO 1519:2011 Paints and varnishes — Bend test (cylindrical mandrel)
E
TC 43 Acoustics
ISO 10302-1:2011
* Acoustics — Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices — Part 1: Airborne noise measurement
R
ISO 10844:2011
* Acoustics — Specification of test tracks for measuring noise emitted by road vehicles and their tyres
T
TC 44 Welding and allied processes
ISO 3581:2003/Amd 1:2011
Welding consumables — Covered electrodes for manual metal arc weld-ing of stainless and heat-resisting steels — Classification — Amendment 1
ISO 8251:2011 Anodizing of aluminium and its alloys — Measurement of abrasion resistance of anodic oxidation coatings
N
14 ISO Update, Supplement to ISO Focus -- February 2011
TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection
ISO 27048:2011
Radiation protection — Dose assess-ment for the monitoring of workers for internal radiation exposure
W
TC 92 Fire safety
ISO 11925-2:2010/Cor 1:2011
* Reaction to fire tests — Ignitability of products subjected to direct impinge-ment of flame — Part 2: Single-flame source test — Technical Corrigendum 1
free
ISO 12863:2010/Cor 1:2011
Standard test method for assessing the ignition propensity of cigarettes — Technical Corrigendum 1
free
TC 106 Dentistry
ISO 28399:2011
Dentistry — Products for external tooth bleaching
G
TC 107 Metallic and other inorganic coatings
ISO 26945:2011
Metallic and other inorganic coat-ings — Electrodeposited coatings of tin-cobalt alloy
E
ISO 28706-1:2008
Vitreous and porcelain enamels — De-termination of resistance to chemical corrosion — Part 1: Determination of resistance to chemical corrosion by acids at room temperature
C
ISO 28706-2:2008
Vitreous and porcelain enamels — De-termination of resistance to chemical corrosion — Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours
H
ISO 28706-3:2008
Vitreous and porcelain enamels — De-termination of resistance to chemical corrosion — Part 3: Determination of resistance to chemical corrosion by al-kaline liquids using a hexagonal vessel
E
ISO 28706-4:2008
Vitreous and porcelain enamels — De-termination of resistance to chemical corrosion — Part 4: Determination of resistance to chemical corrosion by al-kaline liquids using a cylindrical vessel
F
ISO 28721-1:2008
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 1: Quality requirements for apparatus, components, appliances and accessories
K
ISO 28721-2:2008
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 2: Designation and specification of resistance to chemical attack and thermal shock
B
ISO 28721-3:2008
Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 3: Thermal shock resistance
D
TC 108 Mechanical vibration, shock and condition monitoring
ISO 10816-7:2009
Mechanical vibration — Evaluation of machine vibration by measure-ments on non-rotating parts — Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
J
TC 114 Horology
IEC 60086-3:2011
* Primary batteries — Part 3: Watch batteries
U
TC 118 Compressors and pneumatic tools, machines and equipment
ISO 28927-11:2011
Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 11: Stone hammers
J
TC 119 Powder metallurgy
ISO 3927:2011 Metallic powders, excluding powders for hardmetals — Determination of compressibility in uniaxial compression
D
ISO 28080:2011
* Hardmetals — Abrasion tests for hardmetals
G
TC 121 Anaesthetic and respiratory equipment
ISO 5364:2008 Anaesthetic and respiratory equipment — Oropharyngeal airways
F
TC 159 Ergonomics
ISO 24503:2011
Ergonomics — Accessible design --Tactile dots and bars on consumer products
C
TC 163 Thermal performance and en-ergy use in the built environment
ISO 12623:2011
* Thermal insulating products for build-ing equipment and industrial installa-tions — Determination of short-term water absorption by partial immersion of preformed pipe insulation
F
ISO 12624:2011
* Thermal insulating products for build-ing equipment and industrial installa-tions — Determination of trace quanti-ties of water soluble chloride, fluoride, silicate, sodium ions and pH
H
ISO 12628:2011
* Thermal insulating products for build-ing equipment and industrial installa-tions — Determination of dimensions, squareness and linearity of preformed pipe insulation
E
ISO 12629:2011
* Thermal insulating products for build-ing equipment and industrial installa-tions — Determination of water vapour transmission properties of preformed pipe insulation
F
TC 173 Assistive products for persons with disability
ISO 15621:2011
* Urine-absorbing aids — General guide-lines on evaluation
F
TC 194 Biological evaluation of medical devices
ISO 14155:2011
Clinical investigation of medical devices for human subjects — Good clinical practice
U
TC 199 Safety of machinery
ISO 29042-8:2011
* Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 8: Room method for the measurement of the pollutant concentration parameter
B
ISO 29042-9:2011
* Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 9: Decontamination index
D
TC 204 Intelligent transport systems
ISO 21216:2011
* Intelligent transport systems — Wire-less communications — CALM using millimetre communications — Air interface
F
ISO 24099:2011
* Navigation data delivery structures and protocols
U
ISO Update, Supplement to ISO Focus -- February 2011 15
ISO 29283:2011
* ITS CALM Mobile Wireless Broadband applications using Communications in accordance with IEEE 802.20
D
TC 214 Elevating work platforms
ISO 16653-3:2011
* Mobile elevating work platforms — De-sign, calculations, safety requirements and test methods relative to special features — Part 3: MEWPs for orchard operations
C
TC 217 Cosmetics
ISO 24444:2010
Cosmetics — Sun protection test methods — In vivo determination of the sun protection factor (SPF)
S
TC 235 Project Committee: Rating services
ISO/TS 10674:2011
* Rating services — Assessment of creditworthiness of non-listed entities
E
IULTCS International Union of Leather Technologists and Chemists Societies
ISO 13365:2011
Leather — Chemical tests — Deter-mination of the preservative (TCMTB, PCMC, OPP, OIT) content in leather by liquid chromatography
C
ISO 17072-1:2011
Leather — Chemical determination of metal content — Part 1: Extractable metals
D
ISO 17072-2:2011
Leather — Chemical determination of metal content — Part 2: Total metal content
D
CASCO Committee on conformity assessment
ISO/IEC 17021:2011
Conformity assessment — Require-ments for bodies providing audit and certification of management systems
S
JTC 1 Information technology
ISO/IEC ISP 29110-2:2011
* Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 2: Framework and taxonomy
K
ISO/IEC ISP 29110-4-1:2011
* Software engineering — Lifecycle pro-files for Very Small Entities (VSEs) — Part 4-1: Profile specifications: Generic profile group
U
ISO/IEC 7816-1:2011
* Identification cards — Integrated circuit cards — Part 1: Cards with contacts — Physical characteristics
B
ISO/IEC 10373-6:2011
* Identification cards — Test methods — Part 6: Proximity cards
XD
ISO/IEC 14496-27:2009/Amd 2:2011
* Information technology — Coding of audio-visual objects — Part 27: 3D Graphics conformance — Amendment 2: Scalable complexity 3D mesh cod-ing conformance
XZ
ISO/IEC 15444-1:2004/Amd 3:2010
* Information technology — JPEG 2000 image coding system: Core coding system — Part 1: — Amendment 3: Profiles for broadcast applications
XZ
ISO/IEC 23000-5:2011
* Information technology — Multimedia application format (MPEG-A) — Part 5: Media streaming application format
X
ISO/IEC 23006-3:2011
* Information technology — MPEG extensible middleware (MXM) — Part 3: MXM reference software
G
ISO/IEC 16022:2006/Cor 2:2011
* Information technology — Auto-matic identification and data capture techniques — Data Matrix bar code symbology specification — Technical Corrigendum 2
free
ISO/IEC TR 18047-6:2011
* Information technology — Radio frequency identification device con-formance test methods — Part 6: Test methods for air interface communica-tions at 860 MHz to 960 MHz
V
ISO/IEC 29143:2011
* Information technology — Automatic identification and data capture tech-niques — Air interface specification for Mobile RFID interrogators
S
ISO/IEC 19788-1:2011
* Information technology — Learn-ing, education and training — Meta-data for learning resources — Part 1: Framework
U
ISO/IEC 19794-8:2006/Cor 1:2011
* Information technology — Biometric data interchange formats — Part 8: Finger pattern skeletal data — Techni-cal Corrigendum 1
free
ISO/IEC 19795-7:2011
* Information technology — Biometric performance testing and reporting — Part 7: Testing of on-card biometric comparison algorithms
M
ISO/IEC 24709-3:2011
* Information technology — Conform-ance testing for the biometric applica-tion programming interface (BioAPI) — Part 3: Test assertions for BioAPI frameworks
XD
Standards confirmed
The following International Standards are confimred for a five year period:
TC 5 Ferrous metal pipes and metallic fittings
ISO 7-2:2000 (reconfirmed)
TC 8 Ships and marine technology
ISO 3904:1990 (reconfirmed)
ISO 5480:1979 (reconfirmed)
ISO 6345:1990 (reconfirmed)
ISO 15401:2000 (reconfirmed)
ISO 15402:2000 (reconfirmed)
TC 10 Technical product documentation
ISO 2594:1972 (reconfirmed)
ISO 4067-2:1980 (reconfirmed)
ISO 7437:1990 (reconfirmed)
ISO 9431:1990 (reconfirmed)
TC 17 Steel
ISO 4960:2007
ISO 5954:2007
TC 22 Road vehicles
ISO 8349:2002
TC 33 Refractories
ISO 1893:2007
ISO 10080:1990 (reconfirmed)
TC 34 Food products
ISO 10632:2000 (reconfirmed)
ISO 17059:2007
ISO 1956-2:1989 (reconfirmed)
16 ISO Update, Supplement to ISO Focus -- February 2011
ISO 3631:1978 (reconfirmed)
ISO 3659:1977 (reconfirmed)
ISO 3959:1977 (reconfirmed)
ISO 6477:1988 (reconfirmed)
ISO 6661:1983 (reconfirmed)
ISO 6662:1983 (reconfirmed)
ISO 6664:1983 (reconfirmed)
ISO 6665:1983 (reconfirmed)
ISO 6822:1984 (reconfirmed)
ISO 6949:1988 (reconfirmed)
ISO 7558:1988 (reconfirmed)
ISO 7561:1984 (reconfirmed)
ISO 7701:1994 (reconfirmed)
ISO 7920:1984 (reconfirmed)
ISO 8683:1988 (reconfirmed)
ISO 9376:1988 (reconfirmed)
ISO 6667:1985 (reconfirmed)
ISO 6669:1995 (reconfirmed)
ISO 11292:1995 (reconfirmed)
ISO 11294:1994 (reconfirmed)
TC 39 Machine tools
ISO 3371:1975 (reconfirmed)
ISO 8526-1:1990 (reconfirmed)
ISO 8526-2:1990 (reconfirmed)
TC 46 Information and documentation
ISO 3297:2007
TC 48 Laboratory equipment
ISO 641:1975 (reconfirmed)
ISO 695:1991 (reconfirmed)
ISO 719:1985 (reconfirmed)
ISO 4796-2:2000 (reconfirmed)
ISO 4796-3:2000 (reconfirmed)
TC 54 Essential oils
ISO 3527:2000 (reconfirmed)
ISO 8432:1987 (reconfirmed)
ISO 17382:2007
TC 58 Gas cylinders
ISO 11625:2007
TC 72 Textile machinery and accessories
ISO 9904:2000 (reconfirmed)
TC 94 Personal safety -- Protective clothing and equipment
ISO 20346:2004
TC 112 Vacuum technology
ISO 9803-1:2007
ISO 9803-2:2007
ISO 21358:2007
ISO 21360:2007
TC 119 Powder metallurgy
ISO 3954:2007
ISO 4491-1:1989 (reconfirmed)
TC 121 Anaesthetic and respiratory equipment
ISO 5358:1992 (reconfirmed)
ISO 8835-2:2007
ISO 8835-3:2007
ISO 11195:1995 (reconfirmed)
ISO 8836:2007
ISO 7396-2:2007
TC 145 Graphical symbols
ISO/TR 10488:1991
ISO 80416-4:2005
TC 147 Water quality
ISO 10304-1:2007
ISO 11885:2007
ISO 8689-2:2000 (reconfirmed)
ISO 10634:1995 (reconfirmed)
ISO 10706:2000 (reconfirmed)
ISO 10712:1995 (reconfirmed)
ISO 13829:2000 (reconfirmed)
TC 204 Intelligent transport systems
ISO 24535:2007
TC 206 Fine ceramics
ISO 23145-1:2007
TC 213 Dimensional and geometrical product specifications and verification
ISO 10360-3:2000 (reconfirmed)
TC 217 Cosmetics
ISO 18415:2007
ISO 18416:2007
CASCO Committee on conformity assessment
ISO/IEC 17021:2006
Standards withdrawn
Period from 01 January to 31 January 2011
TC 43 Acoustics
ISO 10302:1996 (replaced by ISO 10302-1:2011)
TC 118 Compressors and pneumatic tools, machines and equipment
ISO 8662-14:1996 (replaced by ISO 28927-9:2009, ISO 28927-11:2011)
TC 194 Biological evaluation of medical devices
ISO 14155-1:2003 (replaced by ISO 14155:2011)
ISO 14155-2:2003 (replaced by ISO 14155:2011)
JTC 1 Information technology
ISO/IEC 7816-1:1998
(replaced by ISO/IEC 7816-1:2011)
ISO/IEC 7816-1:1998/Amd 1:2003
(replaced by ISO/IEC 7816-1:2011)
ISO/IEC 10373-6:2001
(replaced by ISO/IEC 10373-6:2011)
ISO/IEC 10373-6:2001/Amd 1:2007
(replaced by ISO/IEC 10373-6:2011)
ISO Update, Supplement to ISO Focus -- February 2011 17
ISO/IEC 10373-6:2001/Amd 2:2003
(replaced by ISO/IEC 10373-6:2011)
ISO/IEC 10373-6:2001/Amd 3:2006
(replaced by ISO/IEC 10373-6:2011)
ISO/IEC 10373-6:2001/Amd 4:2006
(replaced by ISO/IEC 10373-6:2011)
ISO/IEC 10373-6:2001/Amd 5:2007
(replaced by ISO/IEC 10373-6:2011)
ISO/IEC 23000-5:2008
(replaced by ISO/IEC 23000-5:2011)
ISO/IEC TR 18047-6:2008
(replaced by ISO/IEC TR 18047-6:2011)
Meeting calendar
(update at 01 January 2011)
* Information definite but meeting not yet formally convened
** Provisional
February 2011
7-8 Milan (Italy) TC 44/SC 8 Welding and allied processes/Equip-ment for gas welding, cutting and allied processes
7-11 Melbourne (Australia)
TC 121/SC 2 Anaesthetic and res-piratory equipment/Airways and related equipment
9 Paris (France) TC 213 Dimensional and geometrical product specifications and verification
* JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
15-16 Geneva (Switzerland)
** COUNCIL Council
17-18 Geneva (Switzerland)
* COUNCIL Council
18-19 Tokyo (Japan) TC 219 Floor coverings
24 Milan (Italy) TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines
24 Milan (Italy) TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air purity specification and compressed air treatment equipment
24 Milan (Italy) TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems
25 Milan (Italy) TC 118 Compressors and pneumatic tools, ma-chines and equipment
28 Tokyo (Japan) TC 59/SC 3 Buildings and civil engineering works/Functional/user requirements and performance in build-ing construction
29 Berlin (Germany) TC 117 Fans
30-31 Milan (Italy) TC 17/SC 17 Steel/Steel wire rod and wire products
30-31 Berlin (Germany) TC 22/SC 1 Road vehicles/Ignition equipment
18 ISO Update, Supplement to ISO Focus -- February 2011
April 2011
1 Prague (Czech Republic)
JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages
2-3 Oostenede (Belgium)
TC 23/SC 3 Tractors and machin-ery for agriculture and forestry/Safety and comfort
3-4 Oostenede (Belgium)
TC 23 Tractors and machin-ery for agriculture and forestry
3-8 Berlin (Germany) * TC 127 Earth-moving machinery
4 Urbach (Germany)
TC 161 Control and protec-tive devices for gas and/or oil burners and appliances
4-5 Madrid (Spain) TC 34/SC 11 Food products/Animal and vegetable fats and oils
12 Berlin (Germany) TC 110/SC 2 Industrial trucks/Safety of powered industrial trucks
12-13 Florida (USA) TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications
* JTC 1/SC 32 Information technolo-gy/Data management and interchange
16-20 Beijing (China) TC 247 Fraud countermeas-ures and controls
16-20 Berlin (Germany) TC 248 Project committee: Sustainability criteria for bioenergy
16-22 Vienna (Austria) * TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
18-19 Bratislava (Slovakia)
** TC 44/SC 10 Welding and allied processes/Unification of requirements in the field of metal welding
18-19 Pau (France) TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems
20 Rome (Italy) * TC 228 Tourism and related services
20 St. Peters-burg (Russian Federation)
TC 229 Nanotechnologies
22-27 Portland, Oregon (USA)
* TC 184/SC 4 Automation systems and integration/Indus-trial data
23-24 Stavanger (Norway)
** TC 67/SC 4 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and produc-tion equipment
23-27 La Plaine St-Denis (France)
* TC 6 Paper, board and pulps
23-27 Chicago (USA) ** TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection
23-27 Salt Lake City (USA)
TC 171 Document manage-ment applications
23-27 Kuopio (Finland) * TC 215 Health informatics
23-28 Jeju (Korea, Republic of)
* TC 147 Water quality
24 Stockholm (Sweden)
TC 29/SC 2 Small tools/High speed steel cut-ting tools and their attachments
24-26 St. Peters-burg (Russian Federation)
TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe
29 Berlin (Germany) * TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
29-30 London (United Kingdom)
** TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers
San Francisco (USA)
** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements
Hong Kong (Hong Kong, China)
** TC 71 Concrete, reinforced concrete and pre-stressed concrete
(South Africa) ** TC 133 Sizing systems and designations for clothes
June-July 2011
27-1 Berlin (Germany) TC 94/SC 6 Personal safety -- Protective clothing and equipment/Eye and face protection
27-1 Paris (France) ** TC 188 Small craft
2nd Quarter 2011
Prague (Czech Republic)
** TC 204 Intelligent transport systems
July 2011
11-15 Delft (Netherlands)
* REMCO Committee on refer-ence materials
24 Turin (Italy) * JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information
August 2011
(Sweden) ** JTC 1/SC 35 Information technol-ogy/User interfaces
September 2011
9-15 Chicago (USA) ** TC 163 Thermal performance and energy use in the built environment
12-14 Chicago (USA) * TC 205 Building environment design
12-16 Vienna (Austria) * TC 108/SC 4 Mechanical vibration, shock and condition monitoring/Human exposure to me-chanical vibration and shock
12-16 Florianopolis (Brazil)
** TC 150 Implants for surgery
12-16 Florianopolis (Brazil)
* TC 150/SC 1 Implants for surgery/Materials
12-16 Adelaide (Australia)
* TC 190 Soil quality
12-16 Rotorua (New Zealand)
* TC 218 Timber
13-15 Moscow (Rus-sian Federation)
* TC 67 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries
15-17 Brescia (Italy) ** TC 201 Surface chemical analysis
18-24 Phoenix (USA) TC 106 Dentistry
18-24 Paris (France) * TC 164 Mechanical testing of metals
19 Chicago (USA) * TC 21/SC 3 Equipment for fire protection and fire fighting/Fire detection and alarm systems
19 Chicago (USA) * TC 21/SC 11 Equipment for fire protection and fire fighting/Smoke and heat control systems and components
19-20 Paris (France) * TC 164/SC 3 Mechanical testing of metals/Hardness testing
19-20 New Delhi (India) * TMB Technical Manage-ment Board
19-22 Paris (France) * TC 164/SC 4 Mechanical testing of metals/Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
19-23 Bali (Indonesia) * TC 165 Timber structures
19-23 Adelaide (Australia)
* TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification
19-23 Adelaide (Australia)
* TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics
19-23 Adelaide (Australia)
* TC 190/SC 4 Soil quality/Biological methods
ISO Update, Supplement to ISO Focus -- February 2011 21
19-23 Adelaide (Australia)
* TC 190/SC 7 Soil quality/Soil and site assessment
20 Chicago (USA) ** TC 21/SC 6 Equipment for fire protection and fire fighting/Foam and powder media and fixed firefighting sys-tems using foam and powder
20 Berlin (Germany) * TC 29/SC 8 Small tools/Tools for pressing and moulding
20-22 Paris (France) * TC 164/SC 5 Mechanical testing of metals/Fatigue testing
20-23 Washington, D.C (USA)
** TC 172/SC 5 Optics and photon-ics/Microscopes and endoscopes
21 Chicago (USA) * TC 21/SC 2 Equipment for fire protection and fire fighting/Manu-ally transportable fire extinguishers
21 Vienna (Austria) * TC 146/SC 6 Air quality/Indoor air
21 Paris (France) * TC 164/SC 2 Mechanical testing of metals/Ductility testing
21-22 Chicago (USA) * TC 21/SC 8 Equipment for fire protection and fire fighting/Gaseous media and firefighting systems using gas
22-23 Las Vegas (USA) TC 159/SC 4 Ergonomics/Ergo-nomics of human-system interaction
22-23 Paris (France) * TC 164/SC 1 Mechanical testing of metals/Uniaxial testing
23 Chicago (USA) * TC 21 Equipment for fire protection and fire fighting
23 Sao Paulo (Brazil)
* TC 142 Cleaning equipment for air and other gases
24 New Delhi (India) * COUNCIL Council
26-27 Geneva (Switzerland)
* TAG 8 Building
29-30 (Unknown) ** TC 44 Welding and allied processes
Shanghai (China) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
** TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (includ-ing land drainage)
22 ISO Update, Supplement to ISO Focus -- February 2011
26 Amsterdam (Netherlands)
** TC 138/SC 4 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for the supply of gaseous fuels
27 Amsterdam (Netherlands)
** TC 138/SC 3 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for industrial applications
(Korea, Repub-lic of)
** JTC 1/SC 17 Information technol-ogy/Cards and per-sonal identification
London (United Kingdom)
** TC 59/SC 15 Buildings and civil engineering works/Performance criteria for single family at-tached and detached dwellings
(China) ** TC 111 Round steel link chains, chain slings, components and accessories
(China) ** TC 111/SC 1 Round steel link chains, chain slings, components and ac-cessories/Chains and chain slings
(China) ** TC 111/SC 3 Round steel link chains, chain slings, components and accessories/Components and accessories
(Netherlands) ** TC 138 Plastics pipes, fittings and valves for the transport of fluids
Amsterdam (Netherlands)
** TC 138/SC 5 Plastics pipes, fittings and valves for the transport of fluids/General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications
Vienna (Austria) ** TC 146/SC 1 Air quality/Stationary source emissions
(France) ** TC 206 Fine ceramics
October-November 2011
31-3 London (United Kingdom)
** TC 46/SC 11 Information and doc-umentation/Archives/records management
November 2011
2-4 Bangkok (Thailand)
* TC 123 Plain bearings
2-4 Bangkok (Thailand)
* TC 123/SC 2 Plain bearings/Materi-als and lubricants, their properties, characteristics, test methods and testing conditions
2-4 Bangkok (Thailand)
* TC 123/SC 3 Plain bearings/Dimen-sions, tolerances and construction details
2-4 Bangkok (Thailand)
* TC 123/SC 5 Plain bearings/Quality analysis and assurance
2-4 Bangkok (Thailand)
* TC 123/SC 6 Plain bearings/Terms and common items
2-4 Bangkok (Thailand)
* TC 123/SC 7 Plain bearings/Spe-cial types of plain bearings
4 Cincinnati (USA) * TC 60 Gears
4 (Malaysia) ** TC 238 Solid biofuels
7-11 Osaka (Japan) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing
(Japan) ** TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics
Pau (France) ** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements
November-December 2011
26-1 (Israel) ** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems
December 2011
5-9 Sydney (Australia)
* TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machines
4th Quarter 2011
(USA) ** TC 30/SC 7 Measurement of fluid flow in closed conduits/Volume methods including water meters
(Japan) ** TC 172/SC 3 Optics and photon-ics/Optical materials and components
(South Africa) ** TC 211 Geographic in-formation/Geomatics
2nd Semester 2011
Tokyo (Japan) ** TC 130 Graphic technology
ISO Update, Supplement to ISO Focus -- February 2011 23
Month unknown 2011
(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
Kyoto (Japan) ** TC 33 Refractories
January 2012
Charlotte (USA) ** TC 213 Dimensional and geometrical product specifications and verification
February 2012
22-23 Geneva (Switzerland)
* TMB Technical Manage-ment Board
(Korea, Repub-lic of)
** JTC 1/SC 35 Information technol-ogy/User interfaces
Florida (USA) ** TC 115 Pumps
(USA) ** TC 184/SC 2 Automation systems and integration/Robots and robotic devices
February-March 2012
25-5 Toulouse (France)
** TC 34/SC 12 Food products/Sen-sory analysis
March 2012
29 (Unknown) ** TC 23/SC 19 Tractors and machin-ery for agriculture and forestry/Agricultural electronics
(China) ** JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems
(Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
(Korea, Repub-lic of)
** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
(Italy) ** TC 172/SC 7 Optics and photon-ics/Ophthalmic optics and instruments
7-11 Berlin (Germany) ** TC 46 Information and documentation
10 Chicago (USA) ** TC 68 Financial services
(Unknown) ** TC 126 Tobacco and tobacco products
June 2012
13-14 Geneva (Switzerland)
* TMB Technical Manage-ment Board
Calgary (Canada) ** TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements
(Europe) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
Vienna (Austria) ** REMCO Committee on refer-ence materials
Delft (Netherlands)
** TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection
(Unknown) ** TC 34 Food products
Chicago (USA) ** TC 68/SC 4 Financial services/Securities and related financial instruments
(South Africa) ** TC 102 Iron ore and direct reduced iron
Berlin (Germany) ** TC 107 Metallic and other inorganic coatings
Sydney (Australia)
** TC 138 Plastics pipes, fittings and valves for the transport of fluids
Sydney (Australia)
** TC 138/SC 1 Plastics pipes, fittings and valves for the transport of fluids/Plastics pipes and fittings for soil, waste and drainage (includ-ing land drainage)