U505 512-U Order separately one 1 A" x PA" hex head cap screw and W' channel nut. U510 1 4" x 1W set screw included. Order separately one W' x 1 1 A" hex head cap screw and W' channel nut. Technical Services Tel: 888.862.3289 www.tnb.com United States Thomaselleits Tel: 901.252.8000 B-128 800.816.7809 Fax: 901.252.1354 Beam Clams Superstrut® Beam Clamps description of the GoldGaly® hardware finish. GoldGalve hardware will be furnished if no other finish is specified. Beam Clamps for Mounting Channel CAT. NO. FOR CHANNEL A (IN.) STD. CTN. U501 A-1200 A-1400 3316 20 B-1200 B-1400 C-1200 B-1402 U502 A-1202 A-1402 4 13 / 16 20 C-1202 H-1200 Me tal Fram ing & Cable Tray — Superstrut ® Metal Framing System Channel Design Load lbs. Channel Design Load lbs. A-1,200 1,000 A-1,200 1,000 A-1,400 800 A-1,400 800 CAE NO. U501, 0502 Furnished complete. Design load U501— 2,150 lbs. U502 - 3,000 lbs. .;•d , 13 .46" www.tnb.com United States Tel: 901.252.8000 800.816.7809 Fax: 901.252.1354 Technical Services Tel: 888.862.3289 B-128 Metal Framing & Cable Tray — Superstrut ® Metal Framing System Beam Clamps Materials Most products are manufactured from hot-rolled carbon steel bars or hot-rolled strip steel. Pipe rollers are cast iron. Products which are copper placed carry the letter “T” in the prefix. Design Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the “AMERICAN STANDARD CODE FOR PRESSURE PIPING.” GoldGalv ® hardware finish is standard for all Superstrut ® products. This is a multi-process finish of electro-plated zinc, followed by gold-colored trivalent chromium to give excellent corrosion resistance and a superior paint base. See pages B-106–B-107 for a complete description of the GoldGalv ® hardware finish. GoldGalv ® hardware will be furnished if no other finish is specified. Superstrut ® Beam Clamps Beam Clamps for Mounting Channel CAT. NO. FOR CHANNEL A (IN.) STD. CTN. U501 A-1200 A-1400 3 3 ⁄16 20 B-1200 B-1400 C-1200 B-1402 U502 A-1202 A-1402 4 13 ⁄16 20 C-1202 H-1200 8" U505 CAT. NO. U501, U502 Furnished complete. Design load U501 – 2,150 lbs. U502 - 3,000 lbs. U504 8" 3" 2 3 ⁄8" A 13 ⁄16" 1" 1" U510 1 ⁄2" x 1 1 ⁄2" set screw included. Order separately one 1 ⁄2" x 1 1 ⁄2" hex head cap screw and 1 ⁄2" channel nut. Channel A-1,200 A-1,400 Design Load lbs. 1,000 800 7 ⁄8" 2 1 ⁄4" 512-U Order separately one 1 ⁄2" x 1 1 ⁄2" hex head cap screw and 1 ⁄2" channel nut. Channel A-1,200 A-1,400 Design Load lbs. 1,000 800
8
Embed
Superstrut® Beam Clamps Superstrut Beam Clamps Metal ... · PDF filePipe rollers are cast iron. Products which are copper placed carry the letter "T" in the prefix. Design....
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
U504 U505
2A"
512-U Order separately one1A" x PA" hex
head cap screw and W' channel nut.
U510 14" x 1W set screw included.
Order separately one W' x 11A" hex head cap screw and W' channel nut.
Technical Services Tel: 888.862.3289 www.tnb.com
United States Thomaselleits Tel: 901.252.8000 B-128 800.816.7809
Fax: 901.252.1354
Beam Clams
Superstrut® Beam Clamps Materials Most products are manufactured from hot-rolled carbon steel bars or hot-rolled strip steel. Pipe rollers are cast iron. Products which are copper placed carry the letter "T" in the prefix.
Design Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the "AMERICAN STANDARD CODE FOR PRESSURE PIPING."
GoldGaly® hardware finish is standard for all Superstrut® products. This is a multi-process finish of electro-plated zinc, followed by gold-colored trivalent chromium to give excellent corrosion resistance and a superior paint base. See pages B-106—B-107 for a complete description of the GoldGaly® hardware finish. GoldGalve hardware will be furnished if no other finish is specified.
MaterialsMost products are manufactured from hot-rolled carbon steel bars or hot-rolled strip steel. Pipe rollers are cast iron. Products which are copper placed carry the letter “T” in the prefix.
Design LoadsWhere design loads are indicated, they provide for a safety factor of 3 in conformance with the “AMERICAN STANDARD CODE FOR PRESSURE PIPING.”
GoldGalv® hardware finish is standard for all Superstrut® products. This is a multi-process finish of electro-plated zinc, followed by gold-colored trivalent chromium to give excellent corrosion resistance and a superior paint base. See pages B-106–B-107 for a complete description of the GoldGalv® hardware finish. GoldGalv® hardware will be furnished if no other finish is specified.
3A" or14" Rod *E-231-3/8 21/2 1 7/5 31 **E-231-1/2 3 19/2 15/6 53 Assembty requires two H-116-C (34, or two H-116-D CA") square nuts to attach hanger rod.
'A" steel.
* Load rating of 500 lbs.m4th a safety factor of 3.
"Load rating of 800 lbs.m4th a safety factor of 3.
Standard Finish — GoldGalv®, unless otherm4se stated.
E-232 Clamp with Swing Connector E-231 clamp with swing connector
Affords a convenient method of attaching to angled beams
DIAMETER DIMENSIONS (IN.) WT. FOR ROD (IN.) A B g LBSJC
34" or /" Rod *E-232-3/8 518 7/6 1 48 **E-232-1/2 1/2 7/5 2%4 15 76 * Load rating of 400 lbs. with a safety factor of 3.
"Load rating of 550 lbs.m4th a safety factor of 3.
GoldGalv® finish.
Met
al F
ram
ing &
Cabl
e Tr
ay —
Supe
rstru
t® M
etal
Fra
min
g Sy
stem
CAT. NO.
E-233 Anchor Clip • Clamps to I-beams, channels, angles and column
• Two sizes are available, one for % and the other for 1/4" hanger rod
• Each takes flanges up to .8" thickness
CAT. NO. ROD
SIZE (IN.) MAX. BEAM WIDTH
"A" (IN.) FOR USE
WITH WT.
LBSJC
E-233-318-6 % 6 E-231-3/8 or 20 E-233-3/8-10 3/e 10 E-232-3/8 33 E-233-112-6 1/2 6 E-231-1/2 or 26 E-233-112-10 1/2 10 E-232-1/2 37 Anchor Clips should be used when clamps are subject to excessive vibration. To obtain the correct size clips, add 1 inch to the flange width. If length required is not standard, order next largest standard length.
GoldGalv® finish.
A
For use with E-231 and E-232 clamps when hanger rod is not in straight through position.
For use with E-231 and E-232 clamps when hanger rod is not in straight through position.
A
• Clamps to I-beams, channels, angles and column
• Two sizes are available, one for 3⁄8" and the other for 1⁄2" hanger rod
• Each takes flanges up to .8" thickness
E-233 — Anchor Clip
CAT. No.Rod
Size (iN.)MAx. BeAM WidTh
“A” (iN.)FoR uSe
WiThWT.
lBS./C
e-233-3/8-6 3⁄8 6 E-231-3/8 or 20e-233-3/8-10 3⁄8 10 E-232-3/8 33e-233-1/2-6 1⁄2 6 E-231-1/2 or 26e-233-1/2-10 1⁄2 10 E-232-1/2 37Anchor Clips should be used when clamps are subject to excessive vibration. To obtain the correct size clips, add 1 inch to the flange width. If length required is not standard, order next largest standard length.
GoldGalv ® finish.
CAT. No.diMeNSioNS (iN.) WT.
lBS./CA B C3⁄8" or 1⁄2" Rod*e-231-3/8 21⁄2 1 7⁄8 31**e-231-1/2 3 19⁄32
15⁄16 53Assembly requires two H-116-C (3⁄8") or two H-116-D (1⁄2") square nuts to attach hanger rod.1⁄2" steel.
* Load rating of 500 lbs. with a safety factor of 3.
** Load rating of 800 lbs. with a safety factor of 3.
Standard Finish – GoldGalv ®, unless otherwise stated.
A
B
C
E-231 — Structural Steel Clamp
CAT. No.diAMeTeR
FoR Rod (iN.)diMeNSioNS (iN.) WT.
lBS./CA B C3⁄8" or 1⁄2" Rod*e-232-3/8 3⁄8 9⁄16
7⁄16 1 48**e-232-1/2 1⁄2 7⁄8 29⁄64 15⁄8 76* Load rating of 400 lbs. with a safety factor of 3.
** Load rating of 550 lbs. with a safety factor of 3.
GoldGalv ® finish.
• E-231 clamp with swing connector
• Affords a convenient method of attaching to angled beams A
Dim. A 21/4 2 V1 6 31/4 Dim. B 1% 13/4 21/2 Dim. C 23/4 3 4 Dim. D 9/1 6 916 5/6
Per Carton 100 50 50 Wt. in lbs./C 33 36 59 Standard Finish - GoldGalv®, unless otherwise stated.
Pipe Supports Three types of pipe clamps are available to provide right angle, vertical and parallel attachment to a beam. Types RC, EC and PC are malleable iron clamps with an edge that grips the structural member for maximum holding power when tightened.
Type RCS clamps are all steel, providing two bearing surfaces for strong attachment for mounting pipe or conduit at right angles to the beam.
All parts are electrogalvanized, including the threads. The clamps are designed for clamping to a wide variety of beam thicknesses and tapers. Can be installed using only a wrench.
Metal Fram
ing & Cable Tray
— S
uperst rut® Metal Fram
ing System
United States Tel: 901.252.8000
800.816.7809 Fax: 901.252.1354
Technical Services Tel: 888.862.3289
www.tnb.com ThomasaBeits B-135
United StatesTel: 901.252.8000 800.816.7809Fax: 901.252.1354
Technical ServicesTel: 888.862.3289www.tnb.com
B-135
Metal Fram
ing & Cable Tray —
Superstrut® M
etal Framing System
Beam Clamps
• EC Clamp — Malleable Iron
• For mounting pipe or conduit vertically across the beam
3⁄4 11⁄21 1⁄2 11⁄411⁄4 111⁄2 5⁄8Dim. A 21⁄4 2 9⁄16 31⁄4Dim. B 13⁄8 13⁄4 21⁄2Dim. C 23⁄4 3 4Dim. D 9⁄16
9⁄165⁄8
Per Carton 100 50 50Wt. in lbs./C 33 36 59Standard Finish – GoldGalv ®, unless otherwise stated.
A
B
C
D
1⁄8
• A versatile clamp for attaching conduit to any type of beam, channel, angle or column
• Designed to hold the conduit snug against the support with conduit either parallel or at right angle to it
• The case-hardened set screw bites into the structural member for maximum security
• 1⁄8" steel
C-247, C-248 & C-249 — Steel Conduit Clamps
Three types of pipe clamps are available to provide right angle, vertical and parallel attachment to a beam. Types RC, EC and PC are malleable iron clamps with an edge that grips the structural member for maximum holding power when tightened.
Type RCS clamps are all steel, providing two bearing surfaces for strong attachment for mounting pipe or conduit at right angles to the beam.
All parts are electrogalvanized, including the threads. The clamps are designed for clamping to a wide variety of beam thicknesses and tapers. Can be installed using only a wrench.