Superior Products
Professional Support Network
BROAD PRODUC T RANGE
KNOWLEDGEABLE AND HIGHLY EXPERIENCED SALES FORCE
QUALIT Y AND CONSISTENCY
BROAD DEALER NE T WORK
CUSTOMER SER VICE
TECHNICAL EXPER TISE
White Plastisol Inks
Low Cure Plastisols (Endurance Series)
Standard Plastisol Colors
Specialty Plastisol Inks
Special Effects Plastisol Inks
Waterbase Inks
Silicone Inks (Silextreme)
Non-PVC Acrysol Inks (EKO)
3
5
6
7
8
9
10
11
Rutland offers a complete range of screen printing inks including phthalate-free Plastisols, PVC-Free EKO,Silicone, Water Based options providing the screen printer with a full set of tools to meet the changingmarket needs.
Rutland sales team has many years of experience in the screen printing industry to serve your needs, toprovide you the support in trouble shooting and solving technical problems that you may encounter in yourprinting production environment.
Our company, Rutland Group, Inc is ISO 9001 certified which ensures that our products are produced tospecific standards, with strict adherence to process and procedures and documented compliance. Thisexacting process ensures that our products are manufactured uniformly from batch to batch and are ofconsistent quality.
Rutland has a wide network of dealers located in many parts of the world who ensure that our products andservices are available at your location at your convenience.
Our friendly and helpful customer service team is always ready to support your needs via phone or email.
Our qualified and experienced technical team is constantly looking at ways to improve performance of ourproducts and to develop new technologies to meet emerging demands, thus helping our customers stayahead of the market.
TABLE OF CONTENTS
White Plastisol Inks See Page 4 for Polyester Whites
Cotton Whites
PRODUCT NAME Silky Cotton White Street Fighter Cotton White (SF2) Market Cotton White Cotton White Chino White
Product Codes EH9020 EH9072 EH9062 EH9028 EH9056
General Information Premium, softest hand highlight white
High opacity all purpose underbase and highlight white
Economy high opacity underbase white
Easy print, high opacity underbase white
Premium high opacity soft hand highlight white
SUBSTRATES
Cotton Excellent (dark colors or light colors extended)
Excellent (dark colors or light colors extended)
Good (dark colors or light colors extended)
Good (dark colors or light colors extended)
Good (dark colors or light colors extended)
Cotton/Polyester Not recommended Not recommended Not recommended Not recommended Not recommended
100% Polyester Not recommended Not recommended Not recommended Not recommended Not recommended
Athletic Nylon Mesh Not recommended Not recommended Not recommended Not recommended Not recommended
Athletic Polyester Not recommended Not recommended Not recommended Not recommended Not recommended
Waterproof Fabric Excellent w/fiberbond Excellent w/fiberbond Excellent w/fiberbond Excellent w/fiberbond Excellent w/fiberbond
Tight Woven Denier Cloths Excellent w/fiberbond Excellent w/fiberbond Excellent w/fiberbond Excellent w/fiberbond Excellent w/fiberbond
PROPERTIES
Opacity Very good Very good Very good Very good Very good
Bleed Resistance None None None None None
Soft Hand Excellent Very good Good Good Very good
Wet On Wet Not recommended Not recommended Not recommended Not recommended Not recommended
Flash Cure Excellent Excellent Very good Very good Very good
Dry Cleaning/Ironing No No No No No
Printability Very good Very good Good Good Good
Fiber Matdown Excellent Very good Good Good Good
APPLICATION
Mesh 86-230 (34-90cm) 86-230 (34-90cm) 86-230 (34-90cm) 86-230 (34-90cm) 86-230 (34-90cm)
Stencil Direct or capillary Direct or capillary Direct or capillary Direct or capillary Direct or capillary
Cure Temp 320⁰F (160⁰C) 320⁰F (160⁰C) 320⁰F (160⁰C) 320⁰F (160⁰C) 320⁰F (160⁰C)
Wash Up Plastisol screen wash Plastisol screen wash Plastisol screen wash Plastisol screen wash Plastisol screen wash
ADDITIVES
Viscosity Reducer 1-3% EA0005 1-3% EA0005 1-3% EA0005 1-3% EA0005 1-3% EA0005
Soft Hand Extender 0-99% ES0840 NPT S.H.A.P.E. 0-99% ES0840 NPT S.H.A.P.E. 0-99% ES0840 NPT S.H.A.P.E. 0-99% ES0840 NPT S.H.A.P.E. 0-99% ES0840 NPT S.H.A.P.E.
Opaque Extender Not recommended Not recommended Not recommended Not recommended Not recommended
Fiberbond Excellent Excellent Excellent Excellent Excellent
Page 3Always test inks prior to production to test their fitness for your particular application. Customer is responsible for proper application, suitability, and cure of all inks.
Poly Cotton Blends Poly
PRODUCT NAME Street Fighter LB Silky LB White Peak LB White(New)
Premier LB White(New) Maximum White Snap White Endurance Plus White Super Poly White
Product Codes
General InformationAll purpose, high opacity low bleed white for poly cotton blends
Premium, softest low bleed white for poly cotton blends
All around low bleed white for poly cotton blends
Premium high opacity low bleed for poly cotton blends
Premium, softest low bleed white for poly cotton blends
Premium high opacity low bleed white for poly cotton blends
Premium, lower cure low bleed for white poly cotton blends
Premium high opacity low bleed white for 100%polyester
SUBSTRATES
Cotton Not recommended Not recommended Not recommended Not recommended Not recommended Not recommended Not recommended
Cotton/Polyester Very good Very good Very good Very good Very good Very good Not recommended
Over barrier base Over barrier base Over barrier base Over barrier base Over barrier base Over endurance barrier base Excellent
Athletic Nylon Mesh Not recommended Not recommended Not recommended Not recommended Not recommended Not recommended Not recommended
Athletic Polyester Over barrier base Over barrier base Over barrier base Over barrier base Over barrier base Over endurance barrier base Very good
Waterproof Fabric Not recommended Not recommended Not recommended Not recommended Not recommended Not recommended Not recommended
Tight Woven Denier Cloths Not recommended Not recommended Not recommended Not recommended
Not recommended
Very good
Over barrier base
Not recommended
Over barrier base
Not recommended
Not recommended Not recommended Not recommended Not recommended
PROPERTIES
Opacity Excellent Good Good Excellent Excellent Good Excellent
Bleed Resistance Very good Good Good Good Very good Good Excellent
Soft Hand Very good Excellent Good Very good Very good Excellent No
Wet On Wet Not recommended Not recommended Not recommended Not recommended Not recommended Not recommended Not recommended
Flash Cure Excellent Excellent Excellent Excellent Excellent Excellent Excellent
Dry Cleaning/Ironing No No No No No No No
Printability Very good Very good Very good Very good Good Very good Good
Fiber Matdown Very good Very good Very good Very good
Good
Good
Very good
Not recommended
Excellent
No
Very good
Very good Good Very good Good
APPLICATION
Mesh
Stencil Direct or capillary Direct or capillary Direct or capillary Direct or capillary Direct or capillary Direct or capillary Direct or capillary
Cure Temp
Wash Up Plastisol screen wash
Plastisol screen wash
Plastisol screen wash
Plastisol screen wash
Direct or capillary
Plastisol screen wash
Plastisol screen wash
Plastisol screen wash
Plastisol screen wash
ADDITIVES
Viscosity Reducer
Soft Hand Extender Not recommended Not recommended Not recommended Not recommended Not recommended Not recommended Not recommended
Opaque Extender Not recommended Not recommended Not recommended Not recommended Not recommended Not recommended Not recommended
Fiberbond Not recommended Not recommended Not recommended
Not recommended
Not recommended
Not recommended Not recommended Not recommended Not recommended Not recommended
White Plastisol Inks
Page
EL9065
Poly
PRODUCT NAME Endurance Plus White NPT Endurance Base Endurance Plus Black Endurance Plus Barrier Grey
Product Codes EL9755 EL0750 EL8209 EL0755
General Information Premium, lower cure low bleed white for poly cotton blends
Premium high opacity base to be used for mixing C3 colors for 100% polyester and poly cotton blends
Premium high opacity low bleed black for 100% polyester and poly cotton blends
Premium high opacity underbase for 100% polyester and poly cotton blends
SUBSTRATES
Cotton Not recommended Not recommended Not recommended Not recommended
Cotton/Polyester Very good Very good Very good Very good
100% Polyester Over endurance barrier base Over endurance barrier base Over endurance barrier base Use as underbase with endurance white or black
Athletic Nylon Mesh Not recommended Not recommended Not recommended Not recommended
Athletic Polyester Over endurance barrier base Over endurance barrier base Over endurance barrier base Use as underbase with endurance white or black
Waterproof Fabric Not recommended Not recommended Not recommended Not recommended
Tight Woven Denier Cloths Not recommended Not recommended Not recommended Not recommended
PROPERTIES
Opacity Good Good Good Good
Bleed Resistance Good Good Good Good
Soft Hand Excellent Excellent Excellent Excellent
Wet On Wet Not recommended Not recommended Not recommended Not recommended
Flash Cure Excellent Excellent Excellent Excellent
Dry Cleaning/Ironing No No No No
Printability Very good Very good Very good Very good
Fiber Matdown Very good Very good Very good Very good
APPLICATION
Mesh 86-230 (34-90cm) 86-230 (34-90cm) 86-230 (34-90cm) 86-230 (34-90cm)
Stencil Direct or capillary Direct or capillary Direct or capillary Direct or capillary
Cure Temp 290⁰F (150⁰C) 290⁰F (150⁰C) 290⁰F (150⁰C) 290⁰F (150⁰C)
Wash Up Plastisol screen wash Plastisol screen wash Plastisol screen wash Plastisol screen wash
ADDITIVES
Viscosity Reducer 1-3% EA0005 1-3% EA0005 1-3% EA0005 1-3% EA0005
Soft Hand Extender Not recommended Not recommended Not recommended Not recommended
Opaque Extender Not recommended Not recommended Not recommended Not recommended
Fiberbond Not recommended Not recommended Not recommended Not recommended
Low Cure Plastisols (Endurance Series)
Page 5Always test inks prior to production to test their fitness for your particular application. Customer is responsible for proper application, suitability, and cure of all inks.
Standard Colors Mixing Systems
PRODUCT NAME EH EL M3 C3
Product Codes EH Series EL Series M3 Series C3 Series
General Information High opacity, wet-on-wet High opacity Pantone approved high opacity color matching system
Pantone approved very high opacity base dependent color matching system
Colors 28 standard colors 28 standard colors 10 RFU colors + 4 formaldhyde free fluorescents
10 curable pigment concentrates + 4 formaldhyde free fluorescents
SUBSTRATES
Cotton Excellent (light colored fabrics or dark colored fabric w/underbase)
Excellent (light or dark colored fabrics)
Excellent (light colored fabrics or dark colored fabric w/underbase)
Excellent (light colored fabrics or dark colored fabric w/underbase) base dependent system
Cotton/PolyesterWhite and light garments, dark garments require a low-bleed underbase
Dark garments (can also be printed on low-bleed underlay for opacity)
White and light garments, dark garments require a low-bleed underbase
White and light garments, dark garments require a low-bleed underbase
100% PolyesterWhite and light garments, dark garments require a low-bleed underbase
White and light garments, dark garments require a low-bleed underbase
White and light garments, dark garments require a low-bleed underbase
Mix with EL0209 Endurance or EL0746 Poly Base, print on a low-bleed base
Athletic Nylon Mesh Good Not recommended Good Good Better - mix with EN0053
Athletic PolyesterWhite and light garments, dark garments require a low-bleed underbase
White and light garments, dark garments require a low-bleed underbase
White and light garments, dark garments require a low-bleed underbase
Mix with EL0209 Endurance or EL0746 Poly Base, print on a low-bleed base
Tight Woven Denier Cloths Excellent w/fiberbond Excellent w/fiberbond Excellent w/fiberbond Excellent w/fiberbond-base dependent system
PROPERTIES
Opacity Very good Excellent Very good Base dependent
Bleed Resistance None Good None Base dependent
Soft Hand Good Only w/softhand additive Good Base dependent
Wet On Wet Good Not recommended Excellent Base dependent
Flash Cure Excellent Excellent Excellent Base dependent
Dry Cleaning/Ironing No No No No
APPLICATION
Mesh 86-305 (34-120cm) 86-200 (34-78cm) 86-305 (34-120cm) 24-305 (34-120cm)
Stencil Direct or capillary Direct or capillary Direct or capillary Direct or capillary
Cure Temp 320⁰F (160⁰C) 320⁰F (160⁰C) 320⁰F (160⁰C) Base dependent
Wash Up Plastisol screen wash Plastisol screen wash Plastisol screen wash Plastisol screen wash
ADDITIVES
Viscosity Reducer (Non-Curable) 1-3% EA0005 1-3% EA0005 1-3% EA0005 1-3% EA0005
Viscosity Reducer (Curable) ES0005 Plastisol Thinner ES0005 Plastisol Thinner ES0005 Plastisol Thinner ES0005 Plastisol Thinner
Soft Hand Extender ES0840 NPT S.H.A.P.E. ES0840 NPT S.H.A.P.E. ES0840 NPT S.H.A.P.E. ES0840 NPT S.H.A.P.E.
Opaque Extender M30063 or EH0542 Not recommended M30063 Base dependent
Bonding Agent EA0001 EA0001 EA0001 EA0001
Standard Plastisol Colors
Always test inks prior to production to test their fitness for your particular application. Customer is responsible for proper application, suitability, and cure of all inks. *Metallics have different requirements (p.7).
PRODUCT NAME Brilliant Metallics Shimmers Glitters 4C Process Reflective
Product Codes ES0781, ES4779, ES4871, ES7876, ES0785, ES4775 ES0050, ES4060 ES0468, ES4467 EC0125, EC2042, EC4026,
EC6039, EC8002, EC 9030 ER0301, ER0179
General Information High opacity metallic inks Non-tarnishing medium sized flake
Non-tarnishing large sized flake
True color transparent process inks Reflective inks
ColorsMetallic silver and gold, Gold 871C, Copper 876C, metallic gel silver and gold
Silver, 24K gold Silver, gold Regular strength, highlight white
NPT reflective grey, RC silver base
SUBSTRATES
Cotton Excellent Excellent ExcellentWhite and light garments, dark garments require a low-bleed underbase
Excellent
Cotton/Polyester May require a low-bleed underbase Excellent Excellent
White and light garments, dark garments require a low-bleed underbase
Excellent
100% Polyester May require a low-bleed underbase Good Light colors
White and light garments, dark garments require a low-bleed underbase
Not recommended on tight woven material
Athletic Nylon Mesh Good Not recommended Not recommended Not recommended Not recommended
Athletic Polyester Good Good Not recommended Not recommended Not recommended
Tight Woven Denier Cloths Add fiberbond additive Add fiberbond additive Not recommended Not recommended Not recommended
PROPERTIES
Opacity Excellent Very good Good Transparent Good
Bleed Resistance None None None None N/A
Soft Hand No No No Excellent No
Wet On Wet No No No Excellent No
Flash Cure Good Good N/A, print last Not recommended, but flashes well N/A, print last
Dry Cleaning/Ironing Not recommended Not recommended Not recommended Not recommended Not recommended
APPLICATION
Mesh 86 (34cm) 86 (34cm) 24–33T (10–13cm) 305-355(120-140cm) 86 (34cm)
Stencil Direct or capillary Direct or capillary Direct or capillary Direct or capillary Direct or capillary
Cure Temp 320⁰F (160⁰C) 320⁰F (160⁰C) 320⁰F (160⁰C) 320⁰F (160⁰C) 320⁰F (160⁰C)
Wash Up Plastisol screen wash Plastisol screen wash Plastisol screen wash Plastisol screen wash Plastisol screen wash
ADDITIVES
Viscosity Reducer 1-3% EA0005 1-3% EA0005 1-3% EA0005 1-3% EA0005 1-3% EA0005
Soft Hand Extender Not recommended Not recommended Not recommended EC0125 N/A
Opaque Extender Not recommended Not recommended Not recommended Not recommended Not recommended
Bonding Agent EA0001 EA0001 EA0001 Not recommended Not recommended
Specialty Plastisol Inks
Page 7Always test inks prior to production to test their fitness for your particular application. Customer is responsible for proper application, suitability, and cure of all inks.
PRODUCT NAME HD Clear, Gel Clear Soft Density Suede Blister Base Chino Base
Product Codes EG0280, EG0290 ES0247, ES8394, ES9256 EA0015 ES0231 ES0250
General Information High gloss gel clear Three dimensional high density ink Special effect suede finish Special base for spongy foam
print Base for extra-soft prints
Colors None White, black, base Suede additive Tan None
SUBSTRATES
Cotton Excellent Excellent Excellent ExcellentExcellent, best when printed on white or light colored garments
Cotton/Polyester Not recommended Only when printed on low-bleed underbase
Only when printed on low-bleed underbase
White and light garments, dark garments require a low-bleed underbase
White fabric OK, colors not recommended
100% Polyester Not recommendedNot recommended unless printed on poly low-bleed underbase
Only when printed on low-bleed underbase
Only when printed on low-bleed underbase
White fabric OK, colors not recommended
Athletic Nylon Mesh Not recommended Not recommended Not recommended Not recommended Not recommended
Athletic Polyester Not recommended Not recommended Not recommended Not recommended Not recommended
Waterproof Fabric Not recommended Not recommended Not recommended Not recommended Not recommended
Tight Woven Denier Cloths Not recommended Not recommended Not recommended Not recommended Not recommended
PROPERTIES
Opacity Transparent Excellent Very good Excellent Transparent
Bleed Resistance None None None None None
Soft Hand No No Yes Rubbery-flexible Excellent
Wet On Wet No No No No Excellent
Flash Cure Not recommended Excellent Excellent Excellent Excellent
Dry Cleaning/Ironing Not recommended Not recommended Not recommended Not recommended Not recommended
APPLICATION
Mesh 86-110 (34-43cm) thin thread 86-200 (34-77cm) thin thread Up to 156 (62 cm) 83-110 (32-43cm) Up to 305 (120cm)
Stencil 200-700 micron thick film or capillary
200 - 700 micron thick film or capillary Direct or capillary Direct or capillary Direct or capillary
Cure Temp 320⁰F (160⁰C) 320⁰F (160⁰C) 320⁰F (160⁰C) 320⁰F (160⁰C) 320⁰F (160⁰C)
Wash Up Plastisol screen wash Plastisol screen wash Plastisol screen wash Plastisol screen wash Plastisol screen wash
ADDITIVES
Viscosity Reducer Not recommended Not recommended 1-3% EA0005 1-3% EA0005 None needed
Soft Hand Extender Not recommended Not recommended Not recommended Not recommended Not recommended
Opaque Extender Not recommended Not recommended Not recommended Not recommended Not recommended
Bonding Agent Not recommended Not recommended Not recommended Not recommended Not recommended
Special Effects Plastisol Inks
Always test inks prior to production to test their fitness for your particular application. Customer is responsible for proper application, suitability, and cure of all inks.Page 8
Waterbase Inks
Always test inks prior to production to test their fitness for your particular application. Customer is responsible for proper application, suitability, and cure of all inks. Page 9
Waterbase Series
PRODUCT NAME WB-99 Mixing Series W/B Discharge
Product Codes WB Series WB0255
General Information Soft hand waterbase ink Extremely soft hand discharge ink
Colors 9 standard + 4 fluorescent colors Discharge mixing base, discharge white plus
SUBSTRATES
Cotton Excellent on white and light fabrics Excellent on white and light fabrics, requires discharge agent for dark fabric
Cotton/Polyester Excellent on white, test on lights Excellent on white, test on lights
100% Polyester Excellent on white, test on lights Excellent on white, test on lights
Athletic Nylon Mesh Not recommended Not recommended
Athletic Polyester Not recommended Not recommended
Tight Woven Denier Cloths Not recommended Not recommended
PROPERTIES
Opacity Low N/A
Bleed Resistance N/A N/A
Soft Hand Excellent Very soft
Wet On Wet Yes Colors and clear, not white
Flash Cure Fair Good
Dry Cleaning/Ironing OK OK
APPLICATION
Mesh 110-230 (43-92cm) 110-230 (43-92cm)
Stencil Direct water resistant Direct water resistant
Cure Temp 320⁰F (160⁰C) 320⁰F (160⁰C)
Wash Up Water or water soluble screen wash Water or water soluble screen wash
ADDITIVES
Quick Cure Base WB0248 N/A
Retarder WB0100 WB0100
Underlay Not recommended Not recommended
Air Dry Catalyst Not recommended Not recommended
Other Catalyst WB0100 Fiberlock WB0100 Fiberlock
Silextreme Silicone Ink System
PRODUCT NAME Silextreme SXT Series Silextreme SXT Series Silextreme SXT Series
Product Codes SXT SXT SXT
General Information Ready for use colors (RFU) Toner and base colors Pigment concentrate system
Colors Blacks, whites, clears 31 colors + 3 metallics 14 colors
SUBSTRATES
Cotton Fair, except for poor fiber matdown Fair, except for poor fiber matdown Fair, except for poor fiber matdown
Cotton/Polyester Fair, except for poor fiber matdown Fair, except for poor fiber matdown Fair, except for poor fiber matdown
100% Polyester Excellent Excellent Excellent
Athletic Nylon Mesh Excellent Excellent Excellent
Athletic Polyester Excellent Excellent Excellent
Waterproof Fabric Not recommended Not recommended Not recommended
Tight Woven Denier Cloths Not recommended Not recommended Not recommended
PROPERTIES NOT RECOMMENDED NOT RECOMMENDED NOT RECOMMENDED
Opacity Excellent Excellent Excellent
Bleed Resistance Excellent Excellent Excellent
Soft Hand Fair Fair Fair
Wet On Wet No No No
Flash Cure Slow (6-10 seconds) Slow (6-10 seconds) Slow (6-10 seconds)
Dry Cleaning/Ironing Yes Yes Yes
Additive Requires catalyst Requires catalyst Requires catalyst
APPLICATION
Mesh 110-230 (43-92cm) 110-230 (43-92cm) 110-230 (43-92cm)
Stencil Direct or capillary Direct or capillary Direct or capillary
Cure Temp 280°F (138°C) 280°F (138°C) 280°F (138°C)
Wash Up Non-hazard screen wash Non-hazard screen wash Non-hazard screen wash
ADDITIVES
Viscosity Reducer SX0514 (SX Viscosity Reducer) SX0514 (SX Viscosity Reducer) SX0514 (SX Viscosity Reducer)
Soft Hand Extender SX0301 (SX Gloss Clear) SX0301 (SX Gloss Clear) SX0301 (SX Gloss Clear)
Opaque Extender N/A N/A N/A
Nylobond N/A N/A N/A
Silicone Inks (Silextreme)
Always test inks prior to production to test their fitness for your particular application. Customer is responsible for proper application, suitability, and cure of all inks.Page 10
EKO Ink System
PRODUCT NAME EKO RS Series EKO RS Series EKO RS Series
Product Codes RS RS RS
General Information Ready for use colors (RFU) Barrier products Specialties
Colors Whites, blacks + 14 RFU colors Black, grey Bases, additives
SUBSTRATES
Cotton Excellent Excellent Excellent
Cotton/Polyester Excellent Excellent Excellent
100% Polyester Excellent Excellent Excellent
Athletic Nylon Mesh Not recommended Not recommended Not recommended
Athletic Polyester Excellent Excellent Excellent
Waterproof Fabric Not recommended Not recommended Not recommended
Tight Woven Denier Cloths Not recommended Not recommended Not recommended
PROPERTIES
Opacity Excellent Excellent Excellent
Bleed Resistance Excellent Excellent Excellent
Soft Hand Fair Fair Fair
Wet On Wet No No No
Flash Cure Fair (4-6 seconds) Fair (4-6 seconds) Fair (4-6 seconds)
Dry Cleaning/Ironing No No No
APPLICATION
Mesh 110-230 (43-92cm) 110-230 (43-92cm) 110-230 (43-92cm)
Stencil Direct or capillary Direct or capillary Direct or capillary
Cure Temp 320°F (160°C) 320°F (160°C) 320°F (160°C)
Wash Up Non-hazard screen wash Non-hazard screen wash Non-hazard screen wash
ADDITIVES
Viscosity Reducer (Non-Curable) RS0002 (EKO Viscosity Reducer) RS0002 (EKO Viscosity Reducer) RS0002 (EKO Viscosity Reducer)
Viscosity Reducer (Curable) RS0003 (EKO Primer Clear) RS0003 (EKO Primer Clear) RS0003 (EKO Primer Clear)
Soft Hand Extender RS0849 (EKO Soft Hand Base) RS0849 (EKO Soft Hand Base) RS0849 (EKO Soft Hand Base)
Opaque Extender RS0944 (EKO Natural Base) RS0944 (EKO Natural Base) RS0944 (EKO Natural Base)
Bonding Agent NYBD-9120 Nylobond NYBD-9120 Nylobond NYBD-9120 Nylobond
Non-PVC Acrysol Inks (EKO)
Page 11Always test inks prior to production to test their fitness for your particular application. Customer is responsible for proper application, suitability, and cure of all inks.