1 3 4 SuperDuo™ Star Blooms Necklace GoodyBeads.com | 2016 | SuperDuo Star Blooms Necklace Designed by So Vang Component Legend Czech SuperDuo Primary Color (PDU) Czech O Beads (OB) Czech SuperDuo Secondary Color (SDU) Tie off to complete your first component. 2 Thread on 8 PDU and tie both ends together to form a loop. Stitch through the loop of SuperDuos one more time to strengthen loop. Stitch to the outer hole of the PDU, going the opposite direction. Pick up one OB, one SDU, and one OB. Pass through next PDU. Repeat for a total of 8 times. Sew through the loop again to strenghten. Repeat steps 1-3. In step 3, when adding your last SDU, pass through outer hole of completed component to connect the two components. Proceed with adding SB. Tie to secure the working thread and trim. Repeat all steps to connect 5 components. Make sure to connect at every third SDU to create a curve shape . Refer to main image. Sew the top SuperDuo with 26”of chain link. Pass through OB, SDU and OB. Pick up one SB and sew through next OB. Repeat by adding a SB in between the OB. Refer to illustration. 5 6 7 10/0 Czech Round Bead (SB) 8
3
Embed
SuperDuo™ Star Blooms Necklace - GoodyBeads Blogblog.goodybeads.com/wp-content/uploads/2016/10/SuperDuo-Star-Blooms-Necklace-Earrings...SuperDuo™ Star Blooms Necklace GoodyBeads.com
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
1
3 4
SuperDuo™ Star Blooms Necklace
GoodyBeads.com | 2016 | SuperDuo Star Blooms NecklaceDesigned by So Vang
Component Legend
Czech SuperDuoPrimary Color (PDU)
Czech O Beads (OB)
Czech SuperDuoSecondary Color (SDU)
Tie off to complete your first component.
2
Thread on 8 PDU and tie both ends together to form a loop.
Stitch through the loop of SuperDuos one more time to strengthen loop.
Stitch to the outer hole of the PDU, going the opposite direction. Pick up one OB, one SDU, and one OB. Pass through next PDU. Repeat for a total of 8 times. Sew through the loop again to strenghten.
Repeat steps 1-3. In step 3, when adding your last SDU, pass through outer hole of completed component to connect the two components. Proceed with adding SB. Tie to secure the working thread and trim.
Repeat all steps to connect 5 components. Make sure to connect at every third SDU to create a curve shape . Refer to main image.
Sew the top SuperDuo with 26”of chain link.
Pass through OB, SDU and OB. Pick up one SB and sew through next OB. Repeat by adding a SB in between the OB. Refer to illustration.
5
6
7
10/0 Czech Round Bead (SB)
8
1
3 4
SuperDuo™ Star Blooms Earrings
GoodyBeads.com | 2016 | SuperDuo Star Blooms EarringsDesigned by So Vang
Component Legend
Czech SuperDuoPrimary Color (PDU)
Czech O Beads (OB)
Czech SuperDuoSecondary Color (SDU)
8/0 Miyuki Seed Bead
2
Thread on 8 PDU and tie both ends together to form a loop.
Stitch through the loop of SuperDuos one more time to strengthen loop.
Stitch to the outer hole of the PDU, going the opposite direction. Pick up one OB, one SDU, and one OB. Pass through next PDU. Repeat for a total of 8 times. Pass through the loop again to strenghten.
Pass through OB, PDU and OB. Pick up one SB and pass through next OB, SDU and OB. Repeat by adding a SB inbetween the OB. Refer to illustration.
Stitch to the outer hole of a SDU, going the opposite direction. Pick up one OB, two SDU, one OB and through next SDU bead. Stitch down and through collection of beads.
Stitch back up through the just-added SDU and up to the outer holes to add one 8/0 seed bead. Stitch back down and tie off.
Repeat all steps for other earring. Open jump ring and slide through 8/0 seed bead and ear wire loop. Close jump ring.