SUBWOOFER - Team-BHP - India's Most Trusted Car ......2 THANK YOU for choosing an Infinity'" Kappa'" Series 100,9w or 120.9w subwoofer, These Kappa subwoofers are design~d to suit

2

TH AN K YOU for choosing anInfinity'" Kappa'" Series 100,9w or 120.9wsubwoofer, These Kappa subwoofers aredesign~d to suit abroad range of car audioapplications and can be used in awidevariety of enclosure types to produceextended, powerful bass in alimitedamount of vehicle space. To get the mostperformance from your new subwoofer,it is strongly recommended that you haveaqualified professional install your 100,9wor 120,9w subwoofer, Although this manualdoes provide general instructions aboutinstalling these Kappa Series subwoofers,it does not include enclosure constructiondetails or exact installation methods forany particular vehicle, If you do not feelthat you have the necessary experience,do not attempt the installation yourself, butinstead ask your authorized Infinity dealerabout professional installation options.

Remember to keep your sales receipt in asafe place, along with this manual, so thatboth are available for future reference,

BOX CONTENTS

(1) 100,9w or 120.9w subwoofer(1) Foam mounting gasket(1) 3mm hex wrench(1) Owner's manual(1) Technical data sheet

WARNING

Playing loud music in avehicle can hinderyour ability to hear traffic and permanentlydamage your hearing. The maximum volumelevels achievable by Infinity speakers whencombined with high-power amplificationmay exceed safe levels for extendedlistening, Using low volume levels isrecommended when driving. InfinitySystems accepts no liability for hearingloss, bodily injury, or property damage asaresult of use or misuse of this product,

REPRODUCINGBASS IN VEHICLES

Depending on the size of your vehicle'sinterior listening space, reproduced bassfrequencies below 80Hz will be boostedby nearly 12dB per octave as frequencydecreases, This phenomenon, known as thevehicle's transfer function (or cabin gain),plays an important role in shaping thesubwoofer's frequency response in yourvehicle. The enclosed technical data sheetincludes frequency response graphs thatshow both the subwoofer's "in-car"response (which factors in this vehicletransfer function) and its "out-of-car"response (which does not),

SUBWOOFER SEALED ENCLOSURES SEALED-ENCLDSURE PERFORMANCE ADVANTAGES SEALED-ENCLOSURE CONSTRUCTION •ENCLOSURE TYPESThe air trapped inside asealed enclosure • The in-vehicle performance will have Sealed-enclosure construction is straight-

Kappa 100.9w and 120,9w subwoofers are is compressed when the subwoofer the flattest overall frequency response, forward and forgiving of errors in volumedesigned to perform best in moderately moves rearward and is rarefied when the • The in-vehicle response will have the

calculation, but air leaks should be avoided,sized sealed enclosures, vented enclosures subwoofer moves forward. In both cases, Use medium-density fiberboard (MOF), glueand prefabricated band-pass enclosures, the air inside and outside the box will

widest bandwidth, (Usable low-frequency and screws to construct the enclosure, andInfinite-baffle mounting is possible, but the seek equilibrium by pushing and pulling

response inside the vehicle will be seal all joints with silicone caulk,subwoofer's mechanical power handling will on the subwoofer cone, The result is a

below 20Hz.)

be reduced because there will be no volume stiffer suspension when compared to the • An optimum sealed enclosure will alwaysTHE INFINITY RECOMMENDATION

of air to stiffen the subwoofer's suspension subwoofer operating in free air. This means be smaller than an optimum enclosure of 100.9w and 120,9w subwoofers in sealedand prevent overexcursion.lf you choose that the subwoofer's cone will be harder another type, enclosures are recommended for enthusi-infinite-baffle mounting, consider the RMS to move at low frequencies, acondition

SEALED-ENCLOSURE PERFORMANCE TRADE-Omasts who prefer accurate music reproduc-

and peak power-handling ratings to be half which protects the subwoofer from tion and flat frequency response, for thoseof what is listed in the specifications in physical overexcursion, but requires more • An optimum sealed enclosure will have who have asmaller space to devote to athis manual. power than other designs to achieve a lower overall efficiency than an optimum subwoofer enclosure, and for those who

You should choose an enclosure type given acoustic output. enclosure of another type, have plenty of amplifier power devoted to

based on the amount of cargo space you • A100,9w or 120,9w subwoofer in andriving the subwoofer, The sealed-enclosure

can devote to the enclosure, the amount

~optimum sealed enclosure will require

design indicated on the technical data sheet

of power you will use to drive your accompanying this manual represents the

subwoofer(s), and your listening habits.more amplifier power to achieve agiven best compromise between low-frequencyacoustic output than in an optimum extension and flat response,

See accompanying data sheet for specificenclosure of another type,

enclosure dimension requirements.

~ Inflnit'{. 3

4

VENTED ENCLOSURES

Avented enclosure acts like asealedenclosure at frequencies above its tuned(resonance) frequency, At resonance (whichis defined by the venn, the vent producesthe majority of sound - the subwoofer coneis nearly stationary while the air insidethe vent vibrates, This provides greatermechanical power handling at and aboveresonance, but reduced mechanical powerhandling below resonance, Since thesubwoofer cone and voice coil don't movemuch at resonance, airflow across thevoice coil is minimized and thermal powerhandling is reduced slightly at resonance,

Vented enclosures provide better efficiencyin the 40Hz .... 60Hz range, at the expense otsound output in the lowest octClve (below40HZ), The use of an infrasonic filter isrecommended with vented enclosures,An optimum vented enclosure for II KappaSeries subwoofer is IClrger thCln ClIJ optimumseClled enclosure,

Sr,e ClccompClnying datCl sheet for specificenclosure dimension requirements,

VENTED-ENCLOSURE PERFORMANCE ADVANTAGES

• An optimum vented enclosnre has greaterefficiency and higher output in the40Hz~ 60Hz range than an optimumsealed enclosure,

• An optimum vented enclosure providesagreater sensation of bass than anoptimum sealed enclosure.

• A100,9w or 120.9w subwoofer in anoptimum vented enclosure will requireless amplifier power to achieve agivenacoustic output (down to the enclosure'sresonClllce frequency) than in an optimumserlled enclosure.

VENTED' ENCLOSURE PERFORMANCE TRADE-OFFS

• Reduced output in the lowest octave(below 40Hz).

• Reduced mechanical power handlingbelow the enclosure's resonancefrequency, The use of an electronicinfrasonic filter is strongly recommended,to reduce the chance of overdrivingthe subwoofer below the enclosure'sresonance frequency,

• An optimum vented enclosure willCllways be larger than an optimumsealed enclosure.

VENT ED- ENCLOSURE CONSTRUCTION

Vented·enclosure construction is moredifficult than the construction of asealedenclosure, The enclosure volume and portdimensions have aspecific relationshipwith the physical and electromechanicalcharacteristics of the subwoofer, requiringthat the recommended enclosure volumeand port characteristics he strictlyobserved, As with sealed enclosures, usemedium-density fiberboard (MDF), glueand screws to construct the enclosure,and seal all joints with silicone caulk,

THE INFINITY RECOMMENDATION

100,9w and 120.9w subwoofers invented enclosures are recommendedfor enthusiasts who prefer accentuatedbass response, for those who have plentyof cargo space to devote to asubwooferenclosure and for those who will use a lesspowerful amplifier to drive their subwoofer.The volume and port dimensions indicatedon the included technical data sheet mustbe followed precisely to ensure optimumperformance.

~-,

BAND-PASS ENCLOSURES

Band-pass enclosures can provide themost output from any amplifier andsubwoofer combination over a limitedband of frequencies, but that additionaloutput comes at the expense of sonicaccuracy. Band-pass enclosures combineasealed or vented enclosure that housesthe subwoofer along with avented chamberinto which the subwoofer outputs its sound.The vented chamber acts as an acousticlow-pass filter which attenuates highfrequencies in the subwoofer's output. Thatattenuation of high frequencies can make itvery difficult to hear amplifier and speakerdistortion; consequently, you may not beable to determine when the subwoofer isin danger of being damaged.

See accompanying data sheet for specificenclosure dimension requirements,

BAND-PASS-ENCLDSURE PERFORMANCE

ADVANTAGES

• An optimum band-pass enclosure provirleshigher output over alimited bandwidththan an optimum enclosure of any othertype.

BAND-PASS-ENCLOSURE PERFORMANCE TRADE-Om

• Band-pass enclosures achieve high outputat the expense of sonic accuracy,

• An optimum band-pass enclosure has amore limited bandwidth than an optimulllenclosure of any other type.

• The enclosure's 10W-IJaSS filter character­istics can make it difficult to hear if thesubwoofer is in danger of being damaged,

• An optimum band-pass enclosure IS usuallylarger than an optimum vented enclosure,

BAND-PASS-ENCLOSURE CONSTRUCTION

Band-pass-enclosure construction is moredifficult than vented-box construction and,as with vented enclosures, the designparameters for the vented section mustIJe followed carefully, (The sealed sectionis more forgiving of small design 3ndconstruction variations.) Fortunately,there are many prefabricated hand-passenclosures that are designed to extractthe most output possible from nearlyany subwoofer. Prefabricated band-passenclosures are strongly recommendedif you must have ahand-pass enclosure,If you choose to build your own band-passenclosure, use medium-density fiberboard(MDF), glue and screws to construct theenclosure, and be sure to seal all jointswith silicone caulk,

t\Jlnnnity

THE INFINITY RECOMMENDATION

Band-pass enclosures are recommendedonly tor enthusiasts who want high sound­pressure levels (SPl) without regard forsonic accuracy, If high SPL AND great­sounding bass are your goals, choosing avented enclosure is recommended instead.

II

5

6

MOUNTING THESUBWOOFER

The 100,9w and 120,9w subwoofers can bemounted from the outside of the enclosureor from the inside of the enclosure, Which­ever way you mount the subwoofer, use theincluded foam mounting gasket to ensure aleak-free seal between the subwooferframe and the enclosure,

CONNECTING THESUBWOOFER

SETTING THE IMPEDANCE

The 100,9w and 120,9w subwoofers bothfeature the Selectable Smart Impedance'·(SSI) switch, This exclusive feature letsyou set the subwoofer's impedance toeither 2ohms or 4ohms with the flip ofaswitch (see illustrations to the right),This allows you to extract the most fromyour subwoofer amplifier in any situation,

2-0hm Setting

4-0hm Setting

The SSI 2-ohm setting increases thesubwoofer's output over the 4-ohm settingby up to 3dB, depending on the amplifier,Performance is identical in all otherrespects, If the connected amplifier israted for 2-ohm operation and its 2-ohmpower ratings are within the subwoofer'spower-handling specifications, setting theSSI switch in the 2-ohm position willachieve maximum output,

IMPORTANT: Make sure thesubwoofer amplifier is turned OFF beforesetting the SSI switch, Do not changethe switch position while the subwooferamplifier is operating. Doing so coulddamage the amplifier,

CONNECTING THE AMPLIFIER

The Kappa 100.9w and 120.9w subwooferconnectors are compatible with bare wireup to 8AWG (tinned or untinned) and wirethat is terminated with pin connectors.Although single banana connectors will fitinto the connector openings, the connectionmay not be secure.

2. Insert wiresinto connectoropenings

f'~(];~

/~~ I~I

o1~1. Use hex wrench to open connectors3, Use hex wrench to secure connectors

1. Use the included 3mm hex wrench toopen the connectors, as shown in theillustration to the left,

2. Insert the wire ends into the connectoropenings, as shown in the illustration tothe left.

NOTE: If using untinned bare wire,be sure that no stray "+" and "_" strandstouch each other. Touching strands cancause ashort-circuit, which can damageyour amplifier.

3. Use the hex wrench to secure thewires in the connectors, as shown inthe illustration to the left.

~Inflnit¥

•

7

SPECIFICATIONS

Power Handling (RMS):Power Handling (Peak):Sensitivity @ 2.83Vilm:Frequency Response:Impedance:Voice-Coil Diameter:Mounting Depth:Overall Diameter:Cutout Diameter:

100.9w10" (250mm)

SSI Automotive Subwoofer350W1400W89dB

25Hz - 400llz201 4 ohms (selectahle)

2" (50111111)5-15/16" (150ml11)10-3/4" (273I11m)91,'4" (234111111)

120.9w12" (300111111)

SSI Automotive Suhwoofer350W

1400W91 dB

23Hz -- 400Hz2 or 4 ohl11s (selectable)

2" (50111111)6-5/16" (160111111)12-5/8" (320111111)11-3/16" (283I11m)

Avalid serial number is required for warranty coverage.Features, specifications and aplJearance are subject to change without notice,These products are llesigned tor 1110bile applications illHI are n01 intended for connection 10 tile l11ains,

Declaration of Conformity

CEWe. Harman Consumer Group. Inc.

2. route de Tours72500 Chateau du LoirFrance

declare In own responsibility thai lhe products describedill this owner's manual rue in compliance with technicalsl;lIldards'

'-~ Infinity

H~/II1"1I COn,'llllel GrOllp, 1111:. ~:11J[i S;lllio~ Slvll.. NorllJlIIIIII:. CA Yl1~q USAWWVI.III tIlllt ysys tt~IIIS.I:OIII

'; 20U9 H~illl~lIllllern~tloll~IIIJ(llI,ll!os.lncorpOI"le(1. All rlllilis resclvcll.· I'~rt No Hr~101lY 12n.'lSUBOM:1 QlJInfillity "III! K;'1Jp~ "re Ir;JlI"III, rk Sof 11;1I111'1! Il1teln~llol1"lllIdIlSIIII'S, 111I:I)IIIUrillell. rel!isleletl ilillie Ulliletl \,,,'1:,~11I1 or olhel cOlJlllnes.

H Hannrlll Illternat,onCli -

EN 61000-6-32001EN 610006·12001

Klaus LebherzHarman Consumer Group, Inc.Chaleau du Loir. France 3/09

_KA_PP_A®_10_01_9w_1_0_"_W_OO_FE_R=-_TE_CH_NI_CA_L_DA_TA ~ Innnit¥

VOICE-COIL HEIGHT:

MAXIMUM EXCURSION: ,,,1107

102

97

92

87 40

OJ77

72

.-:;;;;~ 67

62300200

10" (254MM)89dB350WRMS (1400WpEAK)

25Hz - 400Hz2OR 4OHMS2" (51 MM)

t mmounting depth5-15(16" (150mm)

~ ..

I cutout diameter I• 9-1/4" (234mm) •

outer diameter

40 50 60 70 80 90 10030

In-Car12dB LP@8I111z

20 Hz

80

85

SPECIFICATIONS

70L 65 1...-_.......;.. .......;.........;.. ......lIoIIIo--1

SEALED ENCLOSURE (FREQUENCY RESPONSE @ 2,83V)d8SPl

DIAMETER:SENSITIVITY (2.83V @ 1M):POWER HANDLING:FREQUENCY RESPONSE:NOMINAL IMPEDACE:VOICE-COIL DIAMETER:DIMENSIONS:

I:::105

100 __"V

95

20 90

Kappa 100,9w(side view)

VOOX= 0,75 ttl (21.23 liters)

THIELE-SMALL PARAMETERS 20 40VOICE-COIL DC RESISTANCE: REVC (OHMS) • , , , , , , , , , 2,00 ••• , •• , , , •• 4,20VOICE-COIL INDUCTANCE@ 1KHz: LEVC (MH) , , , , , , , , , , , 1.17 •• , , ••• , , ,. 1.17DRIVER RADIATING AREA: SD (IN2),.""",." 51,20 •• "" •• ,. 51.20

SD (M2) •• , , , , , , , , • 330,00 •• , , , , ••• 330.00BL(TM) 12,47 17.72VAS (FT3) •, •, , , , , • , , , 0,64 .. , .. , .••• , 0.64VAs(L1TERS) , , , , , , , , , 18,05 18.05CMs(I.lM/N) ........ 118,00 118.00MMS (GRAMS), , , , , , .. 188,00 •• , •• , , •• 188,00Fs(Hz) .... " .... " 33,80 .......... 33,80QMS"""""""" 4,18"""", •• 2,43QES .... , , , , . , , , , •• , 0,51 • , , , , , , , , ,. 0,53QTS ' , , . , , , , .. , , ...• 0.46. , , , , , , , , " 0,44HAG (IN) , , , , , ••••• , •, 0.39 ••• , , , , , , ,. 0.39HAG (MM) 10.00 " , 10.00Hvc (IN) •, , . , •• , , ••• , 1,57, •, , , , , , , •• 1,57Hvc (MM) , , , , , , , •• , , 40.00 •••• , , , , " 40,00XMAX (IN) , , , , ••••• , •• 0,68, • , , , , , , , ,. 0,68XMAx(MM) .... " " .. 17,50 .. " " .... 17,50

MOTOR FORCE FACTOR:COMPLIANCE VOLUME:

SUSPENSION COMPLIANCE:MOVING MASS, AIR LOAD:FREE-AIR RESONANCE:MECHANICAL Q:ELECTRICAL Q:TOTAL Q:MAGNETIC-GAP HEIGHT:

SEALED-Box VOLUME (INCLUDES DRIVER DISPLACEMENT)

VOOX=1.50 ttl (42.48 liters)

82J77

72

67

62

112

1107

102

97

92

87 40

300

"'I107

102

97

92

87 40

OJ77

72

im 67

62300

20040 50 60 70 80 90 10030

In-Car

,,""i;.:../ --"".~.

~... \....;-,"'- ..... ...

.;; "Out-of-Car ~;' ,~~~;;~ I'. \.

I " '\j

I -,,~ "1mI

20Hz

BAND-PASS ENCLOSURE (FREQUENCY RESPONSE @ 2.83V)dBSPl

VENTED ENCLOSURE (FREQUENCY RESPONSE @ 2,83V)d8SPl

l85

80

75

70

65

l:75 ~-- ..~.-+_-.-.---."-_;~.-~..+_.L-+_·-+-··----....--="~--j~··~~-~1

70 I-~-"·~!---+---+

65 1...-_.....:.._........---'.....:............................-. ---'~I10--1

1115

110

105

100

95

20 90

1115

110

105

100

95

20 90

length =7-1/2"190,5mm

t

Port10 = 30.0Hz

10( '1diameter = 3"

76mm

Portto= 60Hz

I~I102mm

VFRONT= 0.75 tt3 (21.23 liters)

length = 10·1/4"

j-~=::;:

Kappa 100.9w(side view)

Kappa 100.9w(side view)

VREAR= 0,75 tt3 (21.23 liters)

VENTED-Box VOLUME (INCLUDES DRIVER/PORT DISPLACEMENTS)

1

BAND-PASS-Box VOLUME (INCLUDES DRIVER/PORT DISPLACEMENTS)

i

Harman Consumer Group, Inc" 8500 Balboa BlVd., Northridge, CA 91329 • www,infinitysystems.com H Harman International 4/09

_KA_pp_A®_12_0_19_w_12_"_W_oO_F_ER~_T_Ec_HN_lc_AL_D_AT_A t\\<) Innnit)(

MAXIMUM EXCURSION:

VOICE-COIl HEIG~T:

"'I107

102

97

92

87 40

82

n

72

II'IS 17 J62

300

..- --.1----

I

':~.

I

-----~ -!

jr"-:-

L

12" (305MM)91d8350WRMS (1400WPEAK)23Hz - 400Hz2OR 4OHMS2" (51 MM)

t .anmounting depth6-5/16"~160mm) ..

I cutout diameter I• 11-3/16" (283mm) •

outer diameter

SEALED ENCLOSURE (FREQUENCY RESPONSE @ 2.83V)d8SPl

SPECIFICATIONS

DIAMETER:SENSITIVITY (2.83V @ 1M):POWER HANOLlNG:FREQUENCY RESPONSE:NOMINAL IMPEOACE:VOICE-COIl DIAMETER:DIMENSIONS:

I:::105

100 ~-""A.I­

95

20 90

Kappa 120.9w(side view)

VBOX= 1.00 ft3 (28.32 liters)

SUSPENSION COMPLIANCE:MOVING MASS, AIR LOAO:FREE-AIR RESONANCE:MECHANICAL Q:ELECTRICAL Q:TOTAL Q:MAGNETIC-GAP HEIGHT:

THIELE-SMALL PARAMETERS 20 40

VOICE-COIL DC RESISTANCE: Rm (OHMS) •.•••..... 2.10 .....•••••• 4.30VOICE-COIL INOUCTANCE @ 1KHz: Lm (MH) ....••..... 1.18 •......•••• 1.18DRIVER RAOIATING AREA: _SO (IN2) .......•••.• 80.40 ••••••••.. 80.40

SO (M2) 518.80 518.808L (1M) 12.87 18.37VAS (FT3) .•••......•• 1.92. . . . . ••• . .. 1,92VAs(L1TERS) 54.43. . . . . •.. •. 54.43CMs{I.lM/N) 144.00 ......... 144,00MMs(GRAMS)•••....• 237.00 ••...•••• 237.00Fs(Hz) ...•••...... 27,20 .......••• 27.20QMS' ....•.•••...... 4.38 •.......••• 2.47QES' ....••••....... 0,51 .......•••. 0.52QTS ...•.•••......•• 0,46 .....••••.. 0.43HAG (IN) •••••....•••• 0.39 •..••••.... 0,39HAG (MM) 10.00 10.00HVc(IN) 1.57 1.57Hvc (MM) ••........• 40.00 •••••..... 40.00XMAX (IN) 0.68 0.68XMAX (MM) 17.50 17.50

MOTOR FORCE FACTOR:COMPLIANCE VOLUME:

SEALED- Box VOLUME (INCLUDES DRIVER DISPLACEMENT)

VBOX= 2.00 ttl (56.63 liters)

I· .1diameter =4"

102mm

:::1102

97

·························-···+··_·· ..··_·-1 92

B7 40

VENTED ENCLOSURE (FREQUENCY RESPONSE @ 2,83V)dBSPl

In·Car12dBLPfiil~Z., !

j ----+-- \.;i _---........ I

,Jr-...... .. f--l ,_--01_-<,./:'~Of.ciar 1·j : ; 11~~"

l:: '-_..- I i-i': t7' !-~'" r--"-:: J75 .• - -t '1 j ;--1-'-;----- _. .w--.. - 72

70 - --i-" -t 1~"--~': r-r---- ,"-,ms 67

~ ~

20 Hz 30 40 50 60 70 BO 90 100 200 300

1115

110

105

100

95

20 90

PortfB =30.0Hz

length =13·5/8"

rKappa 120.9w(side view)

VENTED-Box VOLUME (INCLUDES DRIVER/PORT DISPLACEMENTS)

1

300200

:::1102

97

~,++-----'I----'-1 92

B7 40

::J72

67

6220 Hz

20 90 I---_+_--.

BAND-PASS ENCLOSURE (FREQUENCY RESPONSE @ 2.83V)dBSPl

l:: I--;-~75

70

65 L...-_---'-_---'-_-'--............J.......J.-.......__"'-Io._......_---J40 50 60 70 so 90 100

1115

110

105

100

95

length =6·5/8"

168.27mm

lPort

IB= 60Hz

I~I102mm

VFRONT= 1.75 ft3 (49.55 liters)

Kappa 120.9w(side view)

VREAR= 1.00 ft3 (28.31 liters)

BAND-PASS-Box VOLUME (INCLUDES DRIVER/PORT DISPLACEMENTS)

i

Harman Consumer Group, Inc., 8500 Balboa 8lvd., Northridge, CA 91329 • www.intinitysystems.com H Harman International 4/09

We need tohear from you!

• Warranty Service

• Confirmation of Ownership

In the world of high fidelity,technology is all too often viewed as the

end product. At Infinity: we have a different

viewpoint: technology is only the means to

an end. The end result must be enjoyment

of the programs and music you hear.

Thanks for choosing Infinity

Register your purchase via the Internet at: .... "C"i"" ,

http://www.infinitysystems.comClick on "Product Support"

Click on "Owner's Registration"

LIMITED THREE-YEAR WARRANTYInfinity Kappa® and Kappa Perfect (applies to USA only)

A valid serial number is required for warranty coverage.WHO IS PROTECTED BY THIS WARRANTY?Your Infinity warranty protects the original owner and all subsequent owners for a periodof three (3) years (parts and labor) for all loudspeaker and/or electronic components fromany failure as a result of an original manufacturing defect so long as: (1) your Infinityproduct was originally purchased within the fifty United States or by military personnelfrom an authorized military outlet, (2) the dealer from whom the product was purchasedwas authorized by Infinity to sell such products at the time of original purchase and(3) the original, dated Bill of Safe is presented whenever service is required during thewarranty period. This warranty is only valid for service within the United States and doesnot apply to products purchased elsewhere; other purchasers should contact their localInfinity distributor for warranty information.

WHAT DOES THE INFINITY WARRANTY COVER?Except as specified below, this warranty covers all defects in original materials andworkmanship. The following are not covered: damage caused by accident, misuse, abuse,neglect, product modification; damage occurring during shipment; damage causedby failure to follow instructions in the owner's guide, including failure to performrecommended periodic or routine maintenance; damage resulting from repairs bysomeone not authorized by Infinity; units used fO( other than car use; units not used fortheir intended purpose; claims based upon any misrepresentations by the seller; and anyInfinity product on which the serial number has been altered, defaced or removed.

NOTE: Repair of our products must be done by an authorized dealer or service center.Unauthorized repair will void the warranty and is done at the risk of the consumer.

WHO PAYS FOR WHAT?During the period of this warranty, subject to the above conditions, Infinity will pay all ofthe labor and material expenses to repair a warrantable defect.

HOW CAN WARRANTY SERVICE BE OBTAINED?In the event that your Infinity product(s) should require service, you should first contact eitherthe Infinity dealer from whom the product was purchased or an authorized service center.For the name of an Infinity service center, visit our Web site at www.infinitysystems.com.write us directly at Infinity (AnN: Customer Service), 250 Crossways Park Drive,

Woodbury, NY 11797, or call 516.674.4INF (4463). We may direct you to an authorizedservice center for Infinity products or ask you to send the product to us for repair. In eithercase, you will have to present your original Bill of Sale to establish warranty coverage. Donot send your product to us without prior authorization from our Customer ServiceDepartment. You are responsible for transporting your product to either Infinity or anauthorized service center and for payment of all shipping charges; however, Infinity willpay the return shipping charges (in the event you return the product to us) if the repairsare covered by warranty. If you experience difficulty in transporting your product or arein need of packing materials, please advise us and we may be able to suggest alternativeprocedures and/or provide adequate packing materials.

LIMITATION OF IMPLIED WARRANTIES: All implied warranties, including fitnessfor a particular purpose and merchantability, are limited in duration and length to thewarranty period for your product.

LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES: Infinity is notresponsible for incidental or consequential damage of any kind. Our liability is limited tothe repair or replacement, at our option, of a defective product.

Some states do not allow limitations on how long an implied warranty lasts and/or donot allow the exclusion of incidental or consequential damages, so the above limitationsor exclusions may not apply to you. This warranty gives you specific legal rights and youmay also have other rights, which vary, from state to state.

NOTE: In the event that there is a difference between this warranty and the provisions inany advertisements, product brochure or packaging cartons, the terms of this warranty willprevail.

Infinity continually strives to update and improve existing products, as well as create newones. The specifications and construction details in this and related Infinitypublications are, therefore, subject to change without notice.

© 2003 Harman International Industries, Incorporated. PIN: KAP3-YRWTY REV. 9/03Infinity Systems, 250 Crossways Park Drive, Woodbury, NY 11797 USA 516.674.4INF (4463)H A Harman International CompanyInfinity is a registered trademark of Harman International Industries, Incorporated.

Product Name: _

Store Name: _

PLEASE MAKE NOTE OF THE FOLLOWING INFORMATION AND RETAIN FOR YOUR RECORDS

Model Number: _

Date of Purchase: _