w/Smart Connect ® feature Submittal Package Viega... The global leader in plumbing and heating systems. 301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: 800-976-9817 • E-Mail: [email protected] • www.viega.com SM-PP 0110 1 of 35 Potable Water Hydronic Heating Chilled Water Compressed Air Nitrogen N 2 Argon Low Pressure Steam Fire Protection Vacuum Argomac - K (welding gas) Corgon Oxygen 0 2 (non medical)
22
Embed
Submittal Package - s3.amazonaws.com · viega llc limited warranty propress fittings and valves Subject to the conditions and limitations in this Limited Warranty, Viega LLC (VIEGA)
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
w/Smart Connect® feature
Submittal Package
Viega... The global leader in plumbing and heating systems.301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: 800-976-9817 • E-Mail: [email protected] • www.viega.com
SM-PP 0110 1 of 35
Potable Water
Hydronic Heating
Chilled Water
Compressed Air
Nitrogen N2
Argon
Low Pressure Steam
Fire Protection
Vacuum
Argomac - K (welding gas)
Corgon
Oxygen 02 (non medical)
Viega... The global leader in plumbing and heating systems.301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: 800-976-9817 • E-Mail: [email protected] • www.viega.com
w/Smart Connect® feature
SM-PP 0110 2 of 35
System Data SheetSystem DescriptionProPress®, ProPress XL™ andProPress XLC are safe, reliable, and economical copper pipe installation systems that use modern cold press connection technology for a wide assortment of more than 500 fittings in dimensions ranging from 1/2" to 4".
Tubing: K, L, and M hard copper tubing from 1/2" to 4" and soft copper tubing in 1/2" to 1-1/4" diameters.
ApplicationsAll tubing must comply with the ASTM B88 standard. ProPress fittings are approved for installations in both above and below ground applications. Per code, local inspector approval must be obtained prior to installation below ground.
Approved Applications:• Potable water• Hydronic heating (w/ Glycol)• Chilled water• Compressed Air (200 PSI Max.)• Non Medical Gases (140 PSI Max.)• Fire Sprinkler (175 PSI Max.)• Low Pressure Steam (15 PSI Max.)• Vacuum (29.2" Mercury Max. @ 68°F)
System Benefits• Fast and Easy to Use• Flameless• Permanent Connections• Wide Capacity from 1/2" to 4"• Large Selection of Fittings• Consistent Professional Appearance• Less Equipment Required• Environmentally Friendly Connection System• Versatility of Fittings and Tools for Variety of Applications
FittingsViega ProPress fittings are offered in 500+ configurations including: Elbows, Couplings, Reducers, Tees, Reducing Tees, Threaded Adapters, Unions, Caps, and Flanges. All threaded 1/2" - 2" fittings are bronze. ProPress and ProPress XLC fittings conform to California AB 1953, Vermont 193 and NSF 61 Annex G.
Smart Connect™ (SC Feature) In ProPress 1/2" - 4" dimensions, the Smart Connect Feature assures leakage of liquids and/or gases from inside the system past the sealing element of an unpressed connection. The function of this feature is to provide the installer quick and easy identification of connections which have not been pressed prior to putting the system into operation.
ToolsRIDGID offers three pressing tools for connecting ProPress fittings.• 330-C Corded Tool (1/2" to 4")• 330-B Battery powered Tool (1/2" to 4")• 210-B Battery powered Tool (1/2” to 1-1/4”)• 1/2" to 4" fittings are pressed in 4-7 sec.
HistoryProPress has been used in Europe since the late 1980s and in the U.S. since the late 1990s for a variety of applications. Backed by two plumbing leaders with over 175 years of combined excellence.
WarrantyViega ProPress products carry a 50-year warranty against defects in material and workmanship. The RIDGID Lifetime Warranty applies to tools, jaws and crimp rings from Ridge Tool Company.
INTERNATIONAL APPROVALS• Deutsch Verein des Gas-und Wasserfachese.V. (DVGW)• Lloyd’s Register (LLOYD’S)• Det Norske Veritas (DNV)• Registro Italiano Navale (RINA)• Bureau Veritas (BV)• KIWA
Compliant with• ICC International Plumbing Code• UPC Uniform Plumbing Code• PHCC National standard plumbing code• Florida Building Code, Volume IIPlumbing Code• NFPA 13,13D, and 13R
Contact your local Viega or RIDGID representative for details on local approvals
For more information on RIDGID products contact:Ridge Tool Company400 Clark Street, Elyria, Ohio 44036Demos, Literature: 800-769-7743Technical inquiries: 800-519-3456Availability: 888-743-4333Web: www.ridgid.com
RIDGID Pressing Tools
Model 330C 330B 210B
Volts 120v14.4v
Battery18v
Battery
Amps 5.2A 27.2A 24A
Weight (w/out jaw) 9 lbs. 10 lbs. 6.4 lbs.
ProPress® Warranty
Viega... The global leader in plumbing and heating systems. 301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: 800-976-9817 • E-Mail: [email protected] • www.viega.com
DD-PP 0110 3 of 35
VIEGA LLC LIMITED WARRANTY PROPRESS FITTINGS AND VALVES
Subject to the conditions and limitations in this Limited Warranty, Viega LLC (VIEGA) warrants to wholesalers and licensed plumbing and mechanical contractors in the United States and Canada that its PROPRESS fittings, when properly installed in non industrial and non marine applications and under normal conditions of use, will be free of failure from manufacturing defect for a period of fifty (50) years from date of installation and that its PROPRESS valves, when properly installed in non industrial and non marine applications and under normal conditions of use, will be free of failure from manufacturing defect for a period of two (2) years from date of installation.
Under this Limited Warranty you only have a right to a remedy if the failure or leak resulted from a manufacturing defect in the products covered by this warranty and the failure or leak occurred during the warranty period. You do not have a remedy under this warranty and the warranty does not apply if the failure or any resulting damage is caused by (1) components other than those manufactured or sold by Viega; (2) not designing, installing, inspecting, or testing the ProPress fittings or valves in accordance with Viega’s installation instructions in effect at the time of the installation; applicable code requirements; and accepted industry practice; (3) improper handling and protection of the product prior to and during installation, inadequate freeze protection, exposure to water pressures or temperatures or in applications outside acceptable operating conditions; (4) acts of nature such as, but not limited to, earthquakes, fire, flood, or lightning, or (5) external environmental causes, such as water quality variations, aggressive water, or other external chemical or physical conditions.
In the event of a leak or other failure of the parts covered by this warranty, it is the responsibility of the property owner to obtain and pay for repairs. Only if the warranty applies will Viega be responsible for the remedy under this warranty. The part or parts which you claim failed should be kept and Viega contacted by writing to the address below or telephoning 1-877-843-4262 within thirty (30) days after the leak or other failure and identifying yourself as having a warranty claim. You should be prepared to ship, at your expense, the product which you failed due to a manufacturing defect and document the date of installation. Within a reasonable time after receiving the product, Viega will investigate the reasons for the failure, which includes the right to inspect the product at Viega. Viega will notify you in writing of the results of its review.
In the event that Viega determines that the failure or leak was the result of a manufacturing defect in the part covered by this warranty and that this warranty applies, the EXCLUSIVE AND ONLY REMEDY under this warranty shall be the reimbursement for repair and/or replacement of the part. VIEGA SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OF OTHER DAMAGE (FOR EXAMPLE, WATER OR PROPERTY OR MOLD REMEDIATION) UNDER ANY LEGAL THEORY AND WHETHER ASSERTED BY DIRECT ACTION, FOR CONTRIBUTION OR INDEMNITY OR OTHERWISE.
THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. If a limited warranty shall be found to apply, such warranty is limited to four years. Other than this Limited Warranty, Viega does not authorize any person or firm to create for it any other obligation or liability in connection with its products.
This Limited Warranty gives you specific legal rights and you also may have other rights which may vary from state to state. This warranty shall be interpreted and applied under the law of the state in which the product is installed and is intended as a Commercial Warranty.
ProPress Warranty 0408
Viega... The global leader in plumbing and heating systems.301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: 800-976-9817 • E-Mail: [email protected] • www.viega.com
w/Smart Connect® feature
Dimensional Documentation
SM-PP 0110 4 of 35
Adapter P x F NPT Model 2912ZL Stock Code Size Material A (in) L (in)
1 279295 1/2" x 3/8" NPT Bronze 0.185 1.41779300 1/2" x 1/2" NPT Bronze 0.252 1.61479315 3/4" x 3/4" NPT Bronze 0.350 1.81179310 3/4" x 1/2" NPT Bronze 0.331 1.77279320 1" x 1/2" NPT Bronze 0.331 1.77279325 1" x 3/4" NPT Bronze 0.390 1.85079330 1" x 1" NPT Bronze 0.441 2.00879335 1" x 1-1/4" NPT Bronze 0.500 2.08779345 1-1/4" x 1" NPT Bronze 0.244 1.92979350 1 1/4" x 1-1/4" NPT Bronze 0.343 2.04779340 1-1/4" x 1/2" NPT Bronze 0.370 1.92979360 1-1/2" x 1-1/4" NPT Bronze 0.264 2.36279365 1 1/2" x 1-1/2" NPT Bronze 0.343 2.44179370 2" x 2" NPT Bronze 0.406 2.67779365 1-1/2" x 1-1/2" NPT Bronze 0.382 2.48079370 2" x 2" NPT Bronze 0.445 2.717
Adapter P x M NPT Model 2911ZL Stock Code Size Material A (in) L (in)
1 279210 1/2" x 3/8" NPT Bronze 0.768 1.59479215 1/2" x 1/2" NPT Bronze 1.024 1.92979220 1/2" x 3/4" NPT Bronze 1.004 1.83179225 3/4" x 1/2" NPT Bronze 1.024 1.92979230 3/4" x 3/4" NPT Bronze 0.886 1.71379235 3/4" x 1" NPT Bronze 1.181 2.08779240 1" x 3/4" NPT Bronze 1.181 2.08779245 1" x 1" NPT Bronze 1.260 2.16579250 1" x 1-1/4" NPT Bronze 1.535 2.44179255 1-1/4" x 1" NPT Bronze 1.220 2.24479260 1 1/4" x 1-1/4" NPT Bronze 1.339 2.36279265 1-1/4" x 1-1/2" NPT Bronze 1.476 2.50079270 1-1/2" x 1-1/4" NPT Bronze 1.339 2.75679275 1 1/2" x 1-1/2" NPT Bronze 1.339 2.75679280 1-1/2" x 2" NPT Bronze 1.654 3.07179285 2" x 1-1/2" NPT Bronze 1.535 3.11079290 2" x 2" NPT Bronze 1.496 3.071
Viega... The global leader in plumbing and heating systems.301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: 800-976-9817 • E-Mail: [email protected] • www.viega.com
w/Smart Connect® feature
Dimensional Documentation
SM-PP 0110 5 of 35
Coupling P x P No Stop Model 2915.3Stock Code Size Material L (in)
Tee P x P x FNPTStock Code Material Size Z1 (in) Z2 (in) L1 (in) L2 (in)
d d Rp20868 Copper 4" x 4" x 2" 1.594 2.598 3.957 3.28720873 Copper 4" x 4" x 3/4" 0.965 2.461 3.327 3.07120878 Copper 2-1/2" x 2-1/2" x 2" 1.535 1.831 3.228 2.52022883 Copper 2-1/2" x 2-1/2" x 3/4" 0.906 1.693 2.598 2.30322893 Copper 3" x 3" x 3/4" 0.925 1.949 2.894 2.55920888 Copper 3" x 3" x 3" 1.555 1.984 3.523 2.854
Viega... The global leader in plumbing and heating systems.301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: 800-976-9817 • E-Mail: [email protected] • www.viega.com
w/Smart Connect® feature
Dimensional Documentation
SM-PP 0110 16 of 35
XL-C
Tee P x P x PStock Code Material Size Z1 (in) Z2 (in) Z3 (in) L1 (in) L2 (in) L3 (in)
d1 d2 d320704 Copper 2-1/2" x 2" x 3/4" 1.586 1.614 1.043 3.169 2.519 2.73620709 Copper 2 1/2" x 2" x 1" 1.653 1.732 1.043 3.240 2.637 1.04322283 Copper 2-1/2" x 2" x 1-1/2" 1.909 1.732 1.299 3.504 3.169 2.99222278 Copper 2-1/2" x 2" x 2" 2.232 1.732 1.535 3.819 3.327 3.22820714 Copper 2-1/2" x 2" x 2-1/2" 2.411 1.870 1.830 3.996 3.562 3.52322298 Copper 2-1/2" x 2-1/2" x 3/4" 0.906 1.575 0.906 2.598 2.480 2.59822303 Copper 2-1/2" x 2-1/2" x 1/2" 0.906 1.516 0.906 2.598 2.264 2.59822293 Copper 2-1/2" x 2-1/2" x 1" 1.043 1.732 1.043 2.736 2.638 2.73622288 Copper 2-1/2" x 2-1/2" x 1-1/4" 1.161 1.713 1.161 2.854 2.756 2.85420803 Copper 2-1/2" x 2-1/2" x 1-1/2" 1.299 1.732 1.299 2.992 3.169 2.99220688 Copper 2-1/2" x 2-1/2" x 2" 1.535 1.732 1.535 3.228 3.327 3.22820683 Copper 2-1/2" 1.831 1.870 1.831 3.524 3.563 3.52420694 Copper 2-1/2" x 1-1/4" x 2-1/2" 3.236 1.870 1.830 4.271 3.562 3.52320689 Copper 2-1/2" x 1" x 2-1/2" 3.287 1.870 1.830 4.192 3.562 3.52320684 Copper 2-1/2" x 3/4" x 2-1/2" 3.228 1.870 1.830 4.133 3.562 3.52322323 Copper 3" x 3" x 3/4" 0.925 1.870 .925 2.894 2.776 2.89422308 Copper 3" x 3" x 1" 1.063 1.988 1.063 3.031 2.894 3.03122313 Copper 3" x 3" x 1-1/4" 1.181 1.969 1.181 3.150 3.012 3.15020798 Copper 3" x 3" x 1-1/2" 1.299 1.988 1.299 3.287 3.425 3.28720698 Copper 3" x 3" x 2" 1.555 1.988 1.555 3.524 3.583 3.52420703 Copper 3" x 3" x 2-1/2" 1.850 2.126 1.850 3.819 3.819 3.81920734 Copper 3" x 2" x 2-1/2" 2.629 2.125 1.850 4.212 3.818 3.81820732 Copper 3" x 2" x 2" 2.334 1.999 1.555 3.917 3.582 3.52320727 Copper 3" x 1-1/2" x 3" 3.751 2.145 2.066 5.177 4.114 4.03520729 Copper 3" x 1-1/4" x 3" 3.870 2.145 2.066 4.901 4.114 4.03520724 Copper 3" x 1" x 3" 3.996 2.145 2.066 3.996 4.114 4.03520719 Copper 3" x 3/4" x 3" 3.818 2.145 2.066 4.724 4.114 4.03520693 Copper 3" 2.067 2.146 2.067 4.035 4.114 4.03520794 Copper 4" x 4" x 1" 1.358 2.499 1.358 3.720 3.405 3.72020795 Copper 4" x 4" x 1-1/4" 1.358 2.490 1.358 3.720 3.523 3.72020808 Copper 4" x 4" x 1-1/2" 1.358 2.500 1.358 3.720 3.937 3.72020713 Copper 4" x 4" x 2" 1.594 2.500 1.594 3.957 4.094 3.95720718 Copper 4" x 4" x 2-1/2 1.890 2.638 1.890 4.252 4.331 4.25220723 Copper 4" x 4" x 3" 2.106 2.657 2.106 4.469 4.626 4.46920708 Copper 4" 2.598 2.697 2.598 4.961 5.059 4.961
Viega... The global leader in plumbing and heating systems.301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: 800-976-9817 • E-Mail: [email protected] • www.viega.com
w/Smart Connect® feature
Dimensional Documentation
SM-PP 0110 17 of 35
XL-C
Elbow 45° P x P Stock Code Material Size Z (in) L (in)
December 16, 2009 VIEGA LLC. 301 NORTH MAIN STREET File: 72320/72321/72322 SUITE 900 WICHITA, KS 67202 ATTN: MR. ANDREW GRANZOW Subject: Annex G Certification Dear Mr. Granzow, It is my pleasure to inform you that the potable water products identified under the following Authorized Registered Formulations (ARFs) DCC #’s: PM10121 (Lead Free Pureflow PEX Press Fittings – Continuous Cast) produced at your Grossheringen facility, PM10152 (Lead Free ProPress Bronze Fittings – Continuous Cast) produced at your Grossheringen facility, PM10241 (Lead Free ProPress Bronze Fittings – Sand Cast) produced at your Ennest facility, and PM10242 (Lead Free Pureflow PEX Press Fittings – Sand Cast; Forged) produced at your Ennest facility have successfully completed chemical extraction testing under the following job #’s:
J-00080134 – this authorized PM10121 and PM10152 J-00080135 – this authorized PM10241 J-00080133 – this authorized PM10242
The above mentioned product lines will be placed into Official Listing by next week and they will also contain the following Annex G footnote: [G] Product also Certified to NSF/ANSI Standard 61, Annex G (weighted average lead content of <=0.25%) and is in compliance with California's Health & Safety Code Section 116875 (commonly known as AB1953) and Vermont Act 193. If you should have any questions in the meantime, please do not hesitate to contact me directly. Sincerely,
Suzan Somo Certification Project Manager Phone: 734/ 827- 5670 Plastic Piping System Components Fax: 734/ 827- 7893 Water Distribution Systems E-mail: [email protected]
Viega... The global leader in plumbing and heating systems.301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: 800-976-9817 • E-Mail: [email protected] • www.viega.com
w/Smart Connect® feature
SM-PP 0110 21 of 35
Product InstructionsFor Types K, L and M Hard Copper Tubing in 1/2” to 2” and Soft Copper Tubing in 1/2” to 1-1/4”.This Product Contains Zero Lead
ProPress Insertion Depth Chart
Tube Size 1/2” 3/4” 1” 1-1/4” 1-1/2” 2”
Insertion Depth 3/4” 7/8” 7/8” 1” 1-7/16” 1-9/16”
Read and understand all instructions for installing ProPress fittings. Failure to follow all instructions may result in extensive property damage, serious injury or death.
1. Cut copper tubing at right angles using displacement type cutter or fine-toothed steel saw.2. Remove burr from inside and outside of tubing to prevent cutting sealing element.3. Check seal for correct fit. Do not use oils or lubricants. Use only ProPress Shiny Black EPDM or Dull Black FKM Sealing Elements.4. Mark proper insertion depth as indicated by the ProPress Insertion Depth Chart. Improper insertion depth may result in
improper seal.5. While turning slightly, slide press fitting onto tubing to the marked depth. Note: End of tubing must contact stop.6. Insert appropriate Viega jaw into the pressing tool and push in holding pin until it locks in place.7. Open the jaw and place at right angles on the fitting. Visually check insertion depth using mark on tubing.8. Start pressing process and hold the trigger until the jaw has engaged the fitting.9. After pressing, the jaw can be opened again.10. For applications requiring ProPress with FKM sealing elements, remove the factory installed EPDM sealing element and
replace with FKM sealing element.
Pressure Testing: Pressure testing is to be carried out in accordance with local codes. ProPress includes the Smart Connect (SC) Feature providing quick and easy identification of unpressed connections during the pressure testing process. Unpressed connections are located by pressurizing the system with air or water. When testing with air the pressure range is 1/2 PSI to 85 PSI maximum. When testing with water the pressure range is 15 PSI to 85 PSI maximum. The SC Feature is an integral part of the design of the fitting assuring leakage of liquids and/or gases from inside the system past the sealing element of an unpressed connection. The SC Feature is removed during the pressing process creating a leak-proof, permanent connection.
2 3 41 5
6 6a 7 8 9
“Zero Lead” identifies Viega products meeting the lead free requirements of California and Vermont law, effective January 1, 2010, as tested and listed against NSF- 61, Annex G.
Viega... The global leader in plumbing and heating systems.301 N. Main, 9th Floor • Wichita, KS 67202 • Ph: 800-976-9819 • Fax: 800-976-9817 • E-Mail: [email protected] • www.viega.com
w/Smart Connect® feature
SM-PP 0110 22 of 35
Product InstructionsFor Types K, L and M Hard Copper Tubing in 1/2” to 2” and Soft Copper Tubing in 1/2” to 1-1/4”.This Product Contains Zero Lead.
XL-C
Read, understand and follow all instructions for installing ProPress XL-C fittings. Failure to follow all instructions may result in extensive property damage, serious injury or death.
1. Cut copper tubing at right angles using displacement type cutter or fine-toothed steel saw.2. Keep end of tubing a minimum of 4” away from the contact area of the vise to prevent possible damage to the tubing in
the press area.3. Remove burr from inside and outside of tubing to prevent cutting sealing element.4. Check seal and grip ring for correct fit. Do not use oils or lubricants. Use only ProPress Shiny Black EPDM sealing elements.5. Mark proper insertion depth as indicated by the ProPress XL-C Insertion Depth Chart. Improper insertion depth may result in
an improper seal.6. Illustration demonstrates proper fit of grip ring, separation ring and sealing element.7. While turning slightly, slide press fitting onto tubing to the marked depth. End of tubing must contact stop. 8. ProPress XL-C fitting connections must be performed with ProPress XL-C Rings and V2 ACTUATOR. Use of ProPress XL
Rings and/or Actuator (for Bronze fittings) will result in an improper connection. See Ridgid Operator’s Manual for proper tool instructions.
9. Open XL-C Ring and place at right angles on the fitting. XL-C Ring must be engaged on the fitting bead. Check insertion depth.
10. With V2 ACTUATOR inserted into the tool, open the V2 ACTUATOR as shown and connect V2 ACTUATOR to the XL-C Ring.
11. Place V2 ACTUATOR onto XL-C Ring and start pressing process. Hold the trigger until the Actuator has engaged the XL-C Ring. Keep extremities and foreign objects away from XL-C Ring and V2 ACTUATOR during pressing operation to prevent injury or incomplete press.
12. Release V2 ACTUATOR from XL-C Ring and then remove the XL-C Ring from the fitting on completion of press. Remove tag from fitting indicating press has been performed.
1 2 3 5 6
7 8 9 10 11 12
ProPress XL-C Insertion Depth Chart
Tube Size 2-1/2” 3” 4”
Insertion Depth 1-5/8” 1-7/8” 2-3/8”
Pressure Testing: Pressure testing is to be carried out in accordance with local codes. ProPress XL-C includes the Smart Connect (SC) Feature providing quick and easy identification of unpressed connections during the pressure testing process. Unpressed connections are located by pressurizing the system with air or water. When testing with air the pressure range is 1/2 PSI to 85 PSI maximum. When testing with water the pressure range is 15 PSI to 85 PSI maximum. The SC Feature is an integral part of the design of the fitting assuring leakage of liquids and/or gases from inside the system past the sealing element of an unpressed connection. The SC Feature is removed during the pressing process creating a leak-proof, permanent connection.
4
“Zero Lead” identifies Viega products meeting the lead free requirements of California and Vermont law, effective January 1, 2010, as tested and listed against NSF- 61, Annex G.