236 237 Submariner 140 led Trasformatori vedi sezione ALIMENTATORI / Transformers see POWER SUPPLIES section ACC. - Proiettori a tenuta stagna. - Corpo e staffa regolabile in acciaio INOX anticorrosione ( AISI 316 ) satinato e rivestito con layer di protezione contro l’aggressione della salsedine. - Vetro temperato ad alto spessore. - N.B. L’apparecchio non è adatto all’immersione in acqua marina o contenente additivi chimici. - Waterproof floodlights. - Housing and adjustable bracket made of satin finished corrosion resistant stainless steel (AISI 316) and coated with a protective layer to prevent corrosion by salt in the air. - Extra thick, tempered glass. - N.B. The floodlight is not suitable for immersion in sea water or in water with chimical agents. E8246/LBI 6350° 45° E8246/LBL 470nm E8246/RGB 3X1W - 30° Kit di alimentazione remoto in dotazione / Remote power unit kit supplied IP 68 180° ø 140 158 207 Adatto anche per installazioni in acqua fino a 1 m di profondità Suitable also for underwater applications max deep 1 mt H07RN-F H07RN-F ....../G Apparecchio con griglia di protezione Light fitting with protection grid OP. Apparecchi forniti completi di vetro satinato Fittings supplied complete with frosted glass E....../A vetro satinato / frosted glass 3x1,2W 350mA 3x2,5W 700mA 230V 550mA
69
Embed
Submariner 140 led - Elesud · Submariner 140 led ACC. Trasformatori vedi sezione ALIMENTATORI / Transformers see POWER SUPPLIES section OP. - Proiettori a tenuta stagna. - Corpo
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
236 237
Submariner 140 led
Trasformatori vedi sezione ALIMENTATORI / Transformers see POWER SUPPLIES sectionACC.
OP.
- Proiettori a tenuta stagna.
- Corpo e staffa regolabile in acciaio INOX anticorrosione ( AISI 316 ) satinato e rivestito con layer di protezione contro l’aggressione della salsedine.
- Vetro temperato ad alto spessore.
- N.B. L’apparecchio non è adatto all’immersione in acqua marina o contenente additivi chimici.
- Waterproof fl oodlights.
- Housing and adjustable bracket made of satin fi nished corrosion resistant stainless steel (AISI 316) and coated with a protective layer to prevent corrosion by salt in the air.
- Extra thick, tempered glass.
- N.B. The fl oodlight is not suitable for immersion in sea water or in water with chimical agents.
E8246/LBI
6350°
45°E8246/LBL 470nm
E8246/RGB 3X1W - 30°
Kit di alimentazione remoto in dotazione / Remote power unit kit supplied
IP 68
180°
ø 140
158 20
7
Adatto anche per installazioni in acqua fi no a 1 m di profonditàSuitable also for underwater applications max deep 1 mt
H07RN-FH07RN-F
....../G Apparecchio con griglia di protezione Light fi tting with protection grid
OP. Apparecchi forniti completi di vetro satinato Fittings supplied complete with frosted glass
E....../A vetro satinato / frosted glass
3x1,2W 350mA3x2,5W 700mA
230V550mA
236-237 submariner led.indd 237 10/03/11 15.16
240
- Corpo in estruso di alluminio.
- Verniciatura in polveri epossidiche.
- Asta di regolazione e snodo in ottone cromato matt.
- Vetro di protezione in borosilicato.
- Ottica in alluminio.
- Corpi orientabili separatamente.
- Housing of extruded aluminium.
- Epoxy powder coated.
- Adjustable joint bracket matt chrome brass made.
- Borosilicate protection glass.
- Aluminium optic.
- Housings indipendently adjustable.
Ojo 90
360°
IP 20
180°
OP. ..../SP.... A richiesta: lente per fascio elissoidale per 1x20W - 2x20W PGJ 5 solo per fascio 15° / On request: lens for elliptical beam available for 1x20W - 2x20w PGJ 5 only for 15°
Con basetta tonda e alimetatotre integrato / With round base and built-in ballastBi 67005/15 67005/30Ne 67006/15 67006/30 1x20W 230V MT PGJ5
660
Gr 67007/15 67007/30 661
Bi 67025/15 67025/30Ne 67026/15 67026/30 1x35W 230V MT G8,5
662
Gr 67027/15 67027/30 663
Bi 67013/15 67013/30Ne 67014/15 67014/30 1x70W 230V MT G8,5Gr 67018/15 67018/30 Con basetta tonda e alimetatotre remoto incluso / With round base and remote ballast suppliedBi 67010/15 67010/30Ne 67011/15 67011/30 2x20W 230V MT PGJ5
660
Gr 67012/15 67012/30 661
30°15°
272
Ø 100
CDM-Tm
CDM-TC
CDM-TC
CDM-Tm
250
250
Ø 90Ø 90
238-243 ojo.indd 240 10/03/11 15.17
240 241
Ojo 90
Versione con basetta quadrata e alimetatotre integrato / With square base and built-in ballastBi 67015/15 67015/30Ne 67016/15 67016/30 2x20W 230V MT PGJ5
660
Gr 67017/15 67017/30 661
30°15°
295
120
200
250
OP. ..../SP.... A richiesta: lente per fascio elissoidale per 1x20W - 2x20W PGJ 5 solo per fascio 15° / On request: lens for elliptical beam available for 1x20W - 2x20w PGJ 5 only for 15°
CDM-Tm
- Corpo in estruso di alluminio.
- Verniciatura in polveri epossidiche.
- Asta di regolazione e snodo in ottone cromato matt.
- Vetro di protezione in borosilicato.
- Ottica in alluminio.
- Corpi orientabili separatamente.
- Housing of extruded aluminium.
- Epoxy powder coated.
- Adjustable joint bracket matt chrome brass made.
- Borosilicate protection glass.
- Aluminium optic.
- Housings indipendently adjustable.
360°
IP 20
180°
Ø 90
238-243 ojo.indd 241 10/03/11 15.17
242 243
- Corpo in estruso di alluminio.
- Verniciatura in polveri epossidiche.
- Asta di regolazione e snodo in ottone cromato matt.
- Vetro di protezione in borosilicato.
- Ottica in alluminio.
- Corpi orientabili separatamente.
- Housing of extruded aluminium.
- Epoxy powder coated.
- Adjustable joint bracket matt chrome brass made.
- Borosilicate protection glass.
- Aluminium optic.
- Housings indipendently adjustable.
Ojo 140
360°
IP 20
180°
Con basetta tonda e alimetatotre integrato / With round base and built-in ballstBi 67040/10 67040/30 67040/60Ne 67041/10 67041/30 67041/60 1x70W 230V MT G12Gr 67042/10 67042/30 67042/60 Bi 67045/10 67045/30 67045/60Ne 67046/10 67046/30 67046/60 1x150W 230V MT G12Gr 67047/10 67047/30 67047/60 Con basetta tonda e alimetatotre remoto non in dotazione / With round base and remote ballast not suppliedBi 67050/10 67050/30 67050/60Ne 67051/10 67051/30 67051/60 2x35/70/150W MT G12 J35-J70-J15 J35/E-J70/E-J15/E 35/70/150WGr 67052/10 67052/30 67052/60
30°10° 60°
280
305
ACC.
OP. ..../SP.... A richiesta: lente per fascio elissoidale solo per fascio 10° / On request: lens for elliptical beam only for 10° beam
...../CDM Apparecchio per lampada CDM-R111 - Gx8,5 Fitting for lamp CDM-R111 - Gx8,5
ACC. 644829 35W Lampada CDM-R111 / CDM-R111 lamp
644828 70W
280
305
300
212
Ø 140
Ø 140
238-243 ojo.indd 243 10/03/11 15.17
244 245
Stylus
- Corpo in estruso di alluminio.
- Staffa con snodo graduato.
- Vano ottico estraibile e intercambiabile.
- Riflettore in alluminio intercambiabile.
- Vetro di protezione trasparente in borosilicato.
- Verniciatura in polveri epossidiche.
- Body in extruded aluminium.
- Removeable refkector tray.
- Optic tray removable and interchangeable.
- Interchangeable aluminium reflector.
- Transparent borosilicate protection glass.
- Painting epoxy resin coating.
IP 20
1 m350°90°
OP. ..../SP.... A richiesta: lente per fascio elissoidale per 1x20W - 2x20W PGJ 5 solo per fascio 10° / On request: lens for elliptical beam available for 1x20W - 2x20w PGJ 5 only for 10°
Br 67400/10 67400/30 67400/60 Ne 67401/10
67401/30 67401/60
35W 230V MT G12
Ga 67402/10
67402/30 67402/60 Br 67400/E/10 67400/E/30 67400/E/60 Ne 67401/E/10
67401/E/30 67401/E/60
35W 230V MT G12
Ga 67402/E/10
67402/E/30 67402/E/60 Br 67410/10 67410/30 67410/60 Ne 67411/10
67411/30 67411/60
70W 230V MT G12
Ga 67412/10
67412/30 67412/60
Br 67410/E/10 67410/E/30 67410/E/60 Ne 67411/E/10
67411/E/30 67411/E/60
70W 230V MT G12
Ga 67412/E/10
67412/E/30 67412/E/60
Br 67420/10 67420/30 67420/60 Ne 67421/10
67421/30 67420/60
150W 230V MT G12
Ga 67422/10
67422/30 67420/60
370
282
100
151
282
30°10° 60°
244-245 stylus.indd 245 10/03/11 15.18
246 247
Sirius
- Corpo in estruso di alluminio.
- Staffa in acciaio verniciato.
- Rifl ettori in alluminio.
- Vetro di protezione trasparente in borosilicato.
- Verniciatura in polveri epossidiche.
- Body in extruded aluminium.
- Coated steel support.
- Aluminium refl ector.
- Transparent borosilicate protection glass.
- Painting epoxy resin coating.
IP 20
1 m255°90°
210
140
ø100
170
220
Br 67240/10 67240/30 67240/60 Ne 67241/10
67241/30 67241/60
35W 230V MT G12
Ga 67242/10
67242/30 67242/60 Br 67240/E/10 67240/E/30 67240/E/60 Ne 67241/E/10
67241/E/30 67241/E/60
35W 230V MT G12
Ga 67242/E/10
67242/E/30 67242/E/60 Br 67250/10 67250/30 67250/60 Ne 67251/10
67251/30 67251/60
70W 230V MT G12 666-667-668
Ga 67252/10
67252/30 67252/60
Br 67250/E/10 67250/E/30 67250/E/60 Ne 67251/E/10
67251/E/30 67251/E/60
70W 230V MT G12 666-667-668
Ga 67252/E/10
67252/E/30 67252/E/60
Br 67237 Ne 67238
65W 230V HIG G53
Ga 67239
30°10° 60°
Philips
Philips
Philips
Philips
ACC. 644829 35W Lampada CDM-R111 / CDM-R111 lamp
644828 70W
OP. ..../SP.... A richiesta: lente per fascio elissoidale solo per fascio 10° / On request: lens for elliptical beam only for 10° beam
...../CDM Apparecchio per lampada CDM-R111 - Gx8,5 Fitting for lamp CDM-R111 - Gx8,5
AR111
246-247 sirius.indd 247 10/03/11 15.19
248 249
Trace
- Corpo e vano ottico in pressofusione di alluminio.
- Parabola in alluminio purissimo trattata.
- Gruppo di alimentazione incorporato nell’apparecchio.
- Staffa in acciaio verniciato.
- Vetro di protezione.
- Ottica regolabile.
- Fitting and optic module in die-cast aluminium.
- 100% pure treated aluminium reflector.
- Built-in ballast.
- Painted steel bracket.
- Protection glass.
- Adjustable optic.
IP 40
Br 69400 69400/E Ne 69401
69401/E
35W 230V MT G12 675-676
Ga 69402
69402/E
Br 69410 69410/E Ne 69411
69411/E
70W 230V MT G12 677-678
Ga 69412
69412/E
Br 69420 69420/E Ne 69421
69421/E
150W 230V MT G12 679-680
Ga 69422
69402/E
Br 69430/E Ne
69431/E
100W 230V SDW-TG Gx12.1 681-682
Ga 69432/E
1 m270°90°
ACC. Filtri colorati / Coloured filters
146/B filtro blu / blue filter 146/V filtro verde / green filter
OP. A richiesta: opzione fascio SPOT 5°+ 5° / On request: SPOT beam option 5° + 5°
ø14
5 230
335
248-249 trace.indd 249 10/03/11 15.20
Matrix evo22
8
ø124
120
250 251
- Staffa e vano ottico in lamiera verniciata.
- Ghiera e corpo in alluminio pressofuso verniciato.
- Ottica in alluminio purissimo metallizzato in alto vuoto.
- Vetro di protezione in borosilicato.
- Bracket and optic module in painted sheet metal.
- Trim and housing in painted die-cast aluminium.
- High vacuum metallized aluminium optic.
- Borosilicate protection glass.
350°
IP 40
90°
Con basetta tonda e alimentatore remoto / With round base and remote ballast
Bi 68600 65W
12V
HIG G53
Ga 68601
Bi 68605 695 J35 J35/E 35W
Ga 68606 35/70/150W MT G12 60° 696 J70 J70/E 70W
697 J15 J15/E 150W
Bi 68607 35/70W
MT
G12 60°
701 J35/E 35WGa 68608 702 J70/E 70W
Bi 68611 75W
230V
HEG PAR 30S
E27 60°
Ga 68612
Con basetta quadrata e alimentatore elettronico integrato / With square base and built-in electronic ballastBi 68614
35W
230V
MT
G12 60° 695 Ga 68615
Bi 68616 70W
230V
MT
G12 60° 696
Ga 68617
228
ø124
228
ø124
A richiesta: opzione fascio per lampade MT / On request: beam option for MT lamp 20° .../SP
OP. ...../CDM Solo per lampada MT: apparecchio per lampada CDM-R111 - Gx8,5 Only for MT lamp: fi tting for lamp CDM-R111 - Gx8,5
ACC. 3095 Griglia antiabbagliante solo per apparecchi con attacco G12 - G8,5 Anti-glare grid only for G12 - G8,5 lamps
644829 35W Lampada CDM-R111 / CDM-R111 lamp
644828 70W
AR111-IRC
CDM-TC
Lampada LED 111 in alternativa a lampada AR 111, vedi sezione LAMPADE
LED 111 lampalternatively for AR 111 lamp, see LAMPS section
Vedi sezione ALIMENTATORI See POWER SUPPLIES section
Vedi sezione ALIMENTATORI See POWER SUPPLIES section
Vedi sezione ALIMENTATORI See POWER SUPPLIES section
250-251 Matrix evo.indd 251 10/03/11 15.20
OP. ...../CDM Apparecchio per lampada CDM-R111 - Gx8,5 Fitting for lamp CDM-R111 - Gx8,5
254
Tratto
- Proiettore in pressofusione di alluminio verniciato in polveri.
- Vetro di protezione in borosilicato.
- Die-cast aluminium spotlight powder coated.
- Borosilicate protection glass.
Bi 68055 Ne 68056 35W 230V MT G12 20° 705Ga 68054 Bi 68060 Ne 68061 70W 230V MT G12 20° 707Ga 68067 Bi 68057 Ne 68058 35W 230V MT G12 40° 706Ga 68059 Bi 68062 Ne 68063 70W 230V MT G12 40° 708Ga 68068
IP 20
1 m270° 180°
315
Ø 147
Ø 175
644829 35W Lampada CDM-R111 / CDM-R111 lamp
644828 70W
ACC. Bi 3085Ne 3086 Alette / Flaaps Ø147 per / for MTGa 3087
3025 Filtro UV / UV fi lter
252-259 tratto.indd 254 10/03/11 15.21
254 255
Tratto 2
- Proiettore in pressofusione di alluminio verniciato in polveri.
- Vetro di protezione in borosilicato.
- Staffa a doppio snodo con rotazione orizzontale del corpo dell’apparecchio per minimizzare gli ingombri verticali.
- Die-cast aluminium projector powder coated.
- Borosilicate protection glass.
- Double bracket joint for horizontal rotation of the fitting to minimize the encumbered.
Bi 68055/N Ne 68056/N 35W 230V MT G12 20° 705Ga 68054/N Bi 68060/N Ne 68061/N 70W 230V MT G12 20° 707Ga 68067/N Bi 68057/N Ne 68058/N 35W 230V MT G12 40° 706Ga 68059/N Bi 68062/N Ne 68063/N 70W 230V MT G12 40° 708Ga 68068/N
IP 20
1 m350° 180°
289
Ø 147
201
317
644829 35W Lampada CDM-R111 / CDM-R111 lamp
644828 70W
OP. ...../CDM Apparecchio per lampada CDM-R111 - Gx8,5 Fitting for lamp CDM-R111 - Gx8,5
ACC. Bi 3085Ne 3086 Alette / Flaps Ø147 per / for MTGa 3087
252-259 tratto.indd 255 10/03/11 15.21
256
Tratto box twin up
- Corpo apparecchio e contenitore accessori per cablaggio elettrico in lega di alluminio.
- Componenti elettrici protetti da un fusibile sostituibile.
- Versione da collocare a plafone, parete o in appoggio.
- Housing of the spotlight and box containing the accessories for the electrical wiring made of aluminium alloy.
- Electrical components protected by a fuse which can be easily replaced.
- Wall ceiling or leaning version to be installed separately.
Up fissaggio meccanico / Up mechanical fasteningBi 69700 69750 Ne 69701 69751 2x35W 230V MT G12
705
Ga 69702 69752 706
Bi 69710 69760 Ne 69711 69761 2x70W 230V MT G12
707
Ga 69712 69762 708
Bi 69720 69770 Ne 69721 69771 2x150W 230V MT G12Ga 69722 69772 Bi 69730 Ne 69731 2x65W 230V HIG G53Ga 69732
IP 20
30°15°
200
207
70
Ø 116 Ø 116
70
156
600
Ø 147 Ø 147
200
70
70
156
600
OP. ...../CDM Apparecchio per lampada CDM-R111 - Gx8,5 Fitting for lamp CDM-R111 - Gx8,5
ACC. 3025 Filtro UV / UV filter
644829 35W Lampada CDM-R111 / CDM-R111 lamp
644828 70W
AR111-IRC
252-259 tratto.indd 256 10/03/11 15.21
256 257
Tratto box twin floor
Floor installazione in appoggio / Floor support installationBi 69500 69550 Ne 69501 69551 2x35W 230V MT G12
705
Ga 69502 69552 706
Bi 69510 69560 Ne 69511 69561 2x70W 230V MT G12
707
Ga 69512 69512 708
Bi 69520 69570 Ne 69521 69571 2x150W 230V MT G12Ga 69522 69572 Bi 69530 Ne 69531 2x65W 230V HIG G53Ga 69532
40°20°
70
156
Ø 145 Ø 145
200
70
600
70
156
207
70
Ø 116 Ø 116
200
AR111-IRC
Ne 180 FAST LINK Cavo di alimentazione Shuko 1,8 mt FAST LINK Supply cable Shuko 1,8 mt
Ne 181 FAST LINK Cable CEE22 per collegamento apparecchi M-F 1,8 mt FAST LINK Connection cable CEE22 for M-F fittings 1,8 mt
1800
1800
OP. ...../CDM Apparecchio per lampada CDM-R111 - Gx8,5 Fitting for lamp CDM-R111 - Gx8,5
ACC. 3025 Filtro UV / UV filter
644829 35W Lampada CDM-R111 / CDM-R111 lamp
644828 70W
- Corpo apparecchio e contenitore accessori per cablaggio elettrico in lega di alluminio.
- Componenti elettrici protetti da un fusibile sostituibile.
- Versione da collocare a pavimento singolarmente o in continuo con appositi cavi con presa e spina CEE per un massimo di 5 apparecchi con sistema Fast Link.
- Housing of the spotlight and box containing the accessories for the electrical wiring made of aluminium alloy.
- Electrical components protected by a fuse which can be easily replaced.
- The floor version System Box Twin must be installed on the floor single or in cascate, through suitable cables of connection with CEE socket and plug up to max. 5 fittings with Fast Link System.
IP 20
252-259 tratto.indd 257 10/03/11 15.21
258
- Proiettore in pressofusione di alluminio verniciato in polveri.
- Vetro di protezione in borosilicato.
- Aluminium die-cast projector powder coated.
- Borosilicate protection glass.
Bi 68250/N Ne 68251/N 70W 230V MD Rx7s 715Ga 68252/N Bi 68255/N Ne 68256/N 150W 230V MD Rx7s 716Ga 68257/N Bi 68350/N Ne 68351/N 100W 230V SHT PG12-1 717Ga 68352/N
IP 40
1 m270° 180°
Tratto maxi
280
200
275
50
ACC. Filtri in vetro per MT / Glass filters for MT
146/B filtro blu / blue filter 146/V filtro verde / green filter
Bi 3085Ne 3086 Alette / Flaps Ø147 per / for MTGa 3087
3025 Filtro UV / UV filter
252-259 tratto.indd 258 10/03/11 15.21
258 259
Tratto maxi
Bi 68260 Ne 68261 70W 230V MT G12 20° 718Ga 68262
Bi 68265 Ne 68266 150W 230V MT G12 20° 720Ga 68267
Bi 68270 Ne 68271 70W 230V MT G12 40° 719Ga 68272
Bi 68275 Ne 68276 150W 230V MT G12 40° 721Ga 68277
Ø 147
315
215
ACC. Filtri in vetro per MT / Glass fi lters for MT
146/B fi ltro blu / blue fi lter 146/V fi ltro verde / green fi lter
146/R fi ltro rosso / red fi lter 146/G fi ltro giallo / yellow fi lter
Bi 3085Ne 3086 Alette / Flaps Ø147 per / for MTGa 3087
3025 Filtro UV / UV fi lter
- Proiettore in pressofusione di alluminio verniciato in polveri.
- Vetro di protezione in borosilicato.
- Aluminium die-cast projector powder coated.
- Borosilicate protection glass.
IP 20
1 m270° 180°
252-259 tratto.indd 259 10/03/11 15.21
260 261
Runner
- Corpo in pressofusione di alluminio.
- Verniciatura in polveri epossidiche.
- Ghiera reggivetro in silicone.
- Housing of die-cast aluminium.
- Epoxy powder coated.
- Silicon glass-holder trim.
Bi 18045 Ne 18046 75W 230V HRI GU5,3Gr 18047
Bi 18065 Ne 18066 75W 230V HSG Gy6,35 10° 730Gr 18067 Bi 18075 Ne 18076 75W 230V HSG Gy6,35 25° 731Gr 18077 Bi 18085 Ne 18086 75W 230V HSG Gy6,35 45° 732Gr 18087 Bi 18095 Ne 18096 20W 230V MT PGJ5 10° 733Gr 18097 Bi 18090 Ne 18091 20W 230V MT PGJ5 32° 734Gr 18092
IP 40
1 m90° 355°
120
175
125ø75
ø90
2312
017
5
145ø105
ø90
23
CDM-Tm
CDM-Tm
260-265 Runner.indd 261 17/04/11 11.37
262
Olodum standardSpotty 1
- Corpo in alluminio verniciato con polveri epossidiche.
- Palpebra antiabbagliamento.
- Fusibile di protezione.
- Alimentatore elettronico integrato.
- Aluminium housing, powder coated.
- Anti-glare eyelid.
- Protection fuse.
- Built-in electronic ballast.
Con basetta da parete / With wall mounting baseBi 7620 Ne 7621 20W 230V MT PGJ5Gr 7622 Bi 7623 Ne 7624 35W 230V MT G8,5Gr 7625
IP 20
1 m355°
CDM-TC
90°10°
140
70
104
230
20
285
260-265 Runner.indd 262 17/04/11 11.37
262 263
Rolly 2 - 3
- Basetta e corpo in alluminio.
- Mounting plate and housing made of aluminium.
ROLLY 2 - Con vetro di protezione in borosilicato / With borosilicate protection glassBi 68510 Ne 68511 60W 230V HE B15d 736Gr 68512
Bi 68501 Ne 68502 35W MT G8,5 737 J35/E 35WGr 68503
Bi 68501 Ne 68502 70W MT G8,5 738 J70/E 70WGr 68503 ROLLY 3Bi 68530 Ne 68531 50W 230V HRI
GU10SP
Gr 68532 GZ10
Bi 68540 Ne 68541 50W 230V HRI
GU10SP
Gr 68542 GZ10
IP 40
1 m90° 350°
156
90
ø85
2313
5
ø73
23
ø85
135
23
ø90 ø90
50W 75W
260-265 Runner.indd 263 17/04/11 11.37
264
Olodum standardEos
Con basetta / With ceiling plate Br 906 Ne 907
20W 230V FBT E27
Ga 905 23W 230V FBG E27
Con pinza / With clampBr 911 Ne 912
20W 230V FBT E27
Ga 910 23W 230V FBG E27
A richiesta: cavo con interruttore e spina 10A / On request: cable with switch and 10A socket
Con basetta / With ceiling plate Br 841 Ne 842 75W 230V HEGPAR 30S E27Ga 840 Con pinza / With clamp Br 846 Ne 847 75W 230V HEGPAR 30S E27Ga 845A richiesta: cavo con interruttore e spina 10A / On request: cable with switch and 10A socket
Con basetta / With ceiling plate Br 861 Ne 862 75W 230V HEGPAR 38 E27Ga 860
Con pinza / With clamp Br 866 Ne 867 75W 230V HEGPAR 38 E27Ga 865A richiesta: cavo con interruttore e spina 10A / On request: cable with switch and 10A socket
- Corpo in lamiera di alluminio.
- Verniciatura in polveri epossidiche.
- Versione alogena 150/300W con vetro di protezione in borosilicato.
- Versioni con pinza o basetta.
- Aluminium housing.
- Epoxy powder coated.
- 150W/300W halogen lamp with borosilicate protection glass.
- Clamp or ceiling plate versions.
IP 20
ø 130
155 22
3
ø 190
277
220
221
ø 150
163
ø 130
260-265 Runner.indd 264 17/04/11 11.37
264 265
Con basetta / With ceiling plate Br 886 Ne 887 150W 230V HDG E27Ga 885 Con pinza / With clampBr 891 Ne 892 150W 230V HDG E27Ga 890 A richiesta: cavo con interruttore e spina 10A / On request: cable with switch and 10A socket
Con basetta / With ceiling plate Br 926 Ne 927 300W 230V HDG R7sGa 925 Con pinza / With clamp Br 931 Ne 932 300W 230V HDG R7sGa 930A richiesta: cavo con interruttore e spina 10A / On request: cable with switch and 10A socket
Eos
L 78 mm
L 117 mm
ø 169
277
220
L 78 mm
L 117 mmø 206
183 24
0
Con con basetta / With ceiling plate
Con pinza / With clamp
0÷30 mm
- Corpo in lamiera di alluminio.
- Verniciatura in polveri epossidiche.
- Versione alogena 150/300W con vetro di protezione in borosilicato.
- Versioni con pinza o basetta.
- Aluminium housing.
- Epoxy powder coated.
- 150W/300W halogen lamp with borosilicate protection glass.
- Clamp or ceiling plate versions.
IP 20
260-265 Runner.indd 265 17/04/11 11.37
Bi J710 Ne J711 70W 230V MD Rx7sGa J712
Bi J155 Ne J156 150W 230V MD Rx7sGa J157
Bi S160 Ne S161 100W 230V STH PG12-1Ga S162
266 267
J2000
- Parabola in alluminio purissimo.
- Portalampada in ceramica.
- Manopole di bloccaggio in poliammide rinforzato.
Con basetta / With base plate Bi 3150 Ne 3151 300W 230V HDG R7s 740Ga 3152
Con pinza apertura max. 30 mm / With clamp max. aperture 30 mm Bi 3155 Ne 3156 300W 230V HDG R7s 740Ga 3157A richiesta: cavo con interruttore e spina 10A / On request: cable with switch and 10A socket
Punto 3
- Corpo in pressofusione di alluminio verniciato in polveri epossidiche, cablato per lampada alogena lineare da 300W.
- Staffa e basetta di sostegno in materiale termoplastico.
- Riflettore simmetrico in alluminio purissimo.
- Vetro di protezione in borosilicato.
- Housing of die-cast aluminium, powder coated, for 300W linear halogen lamp.
- Bracket and mounting plate of thermoplastic material.
- Symmetrical reflector of very pure aluminium.
- Borosilicate protection glass.
IP 40
L 117 mm
L 117 mm
1 m180°
2220
8
100
L 180 mm
ACC. Bi 3170Ne 3171 Alette / FlapsGa 3172
0÷30 mm
ø 80
208
180
110
266-269 J2000.indd 269 10/03/11 15.35
270 271
Solaris 1
- Corpo e gruppo ottico orientabili in pressofusione di alluminio.
- Parabola in alluminio purissimo.
- Vetro di protezione temperato.
- Gruppo di alimentazione inserito nell’apparecchio.
- Body and optics made of die-cast aluminium.
- Refl ector of very pure aluminium.
- Tempered protection glass.
- Built-in ballast.
Monolampada / Mono-lamp versionBi J601 Ne J602
70W 230V MD Rx7s 760
Bi J611 Ne J612
150W 230V MD Rx7s 761
Bi S107 Ne S108
100W 230V STH PG12-1 762
Con lampada di preaccensione / With pre-ignition lampBi J601/2L MD Rx7s 763Ne J602/2L
70÷200W
230V HDG R7s
Bi J611/2L MD Rx7sNe J612/2L
150÷200W
230V HDG R7s
764
Con vetro in borosilicato / With borosilicate glassBi 3205 Ne 3206
300W 230V HDG R7s 765
L 117 mm
L 117 mm
IP 40
1 m55°
60°
Bi 108 Basetta tonda / Round base
Ne 109
3050 Filtri UV / UV fi lter
ACC. Bi 3065 Alette / Flaps
Ne 3066
200
90
300
200
90
200
355°
270-273 Solaris.indd 271 10/03/11 15.37
272
Solaris 1
- Corpo e gruppo ottico orientabili in pressofusione di alluminio.
- Parabola in alluminio purissimo.
- Vetro di protezione temperato.
- Gruppo di alimentazione inserito nell’apparecchio.
- Body and optics made of die-cast aluminium.
- Refl ector of very pure aluminium.
- Tempered protection glass.
- Built-in ballast.
L (mm) Con braccio corto / With short armBi 3205/07 Ne 3206/07
450 300W 230V HDG R7s 765
Bi J601/07 Ne J602/07
450 70W 230V MD Rx7s 760
Bi J611/07 Ne J612/07
450 150W 230V MD Rx7s 761
Bi S107/07 Ne S108/07
450 100W 230V STH PG12-1 762
IP 40
1 m
L 117 mm
355°
Bi 108 Basetta tonda / Round base
Ne 109
3050 Filtri UV / UV fi lter
ACC. Bi 3065 Alette / Flaps
Ne 3066
90
206
55° 90°
60° 90°
600 160
600 60
270-273 Solaris.indd 272 10/03/11 15.37
272 273
Solaris 1
L (mm) Con braccio lungo / With long armBi 3205/12 Ne 3206/12
750 300W 230V HDG R7s 765
Bi J601/12 Ne J602/12
750 70W 230V MD Rx7s 760
Bi J611/12 Ne J612/12
750 150W 230V MD Rx7s 761
Bi S107/12 Ne S108/12
750 100W 230V STH PG12-1 762
L 117 mm
ACC.355°
Bi 108 Basetta tonda / Round base
Ne 109
3050 Filtri UV / UV fi lter
ACC. Bi 3065 Alette / Flaps
Ne 3066
- Corpo e gruppo ottico orientabili in pressofusione di alluminio.
- Parabola in alluminio purissimo.
- Vetro di protezione temperato.
- Gruppo di alimentazione inserito nell’apparecchio.
- Body and optics made of die-cast aluminium.
- Refl ector of very pure aluminium.
- Tempered protection glass.
- Built-in ballast.
IP 40
1 m
90
206
55° 90°
60° 90°
900 160
900 60
270-273 Solaris.indd 273 10/03/11 15.37
274 275
Ledfl ex
L (mm) Alimentatore remoto non in dotazione / Remote ballast not included
Bi LFX102/300/LBI
300 15° LFX102/300/LBL
Ne LFX103/300/LBI
300 15° LFX103/300/LBL
Ga LFX119/300/LBI
300 15° LFX119/300/LBL
Bi LFX102/500/LBI
500 15° LFX102/500/LBL
Ne LFX103/500/LBI
500 15° LFX103/500/LBL
Ga LFX119/500/LBI
500 15° LFX119/500/LBL
- Corpo e ghiera in alluminio verniciato.
- Power led 1W 350mA - 2W 550mA.
- Fascio di apertura luminosa 15°.
- A richiesta fasci di apertura (30°).
- Completamente snodabile.
- Painted aluminium body and trim.
- 1W Power led with 350mA - 2W 550mA.
- Light beam 15°.
- On request lens with 30° light beam width.
- Completely adjustable.
IP 20
1 m90°
27
26,5
L
23
42
5,5
M 10x1
644758 4W max / 350 mA Alimentatore remoto / Remote ballastACC.
6350°470nm
6350°470nm
6350°470nm
6350°470nm
6350°470nm
6350°470nm
1x1,2W 1x2W
350mA550mA
350mA550mA
350mA550mA
1x1,2W 1x2W
1x1,2W 1x2W
350mA550mA
1x1,2W 1x2W
350mA550mA
1x1,2W 1x2W
350mA550mA
1x1,2W 1x2W
274-277 Ledflex-led joint.indd 275 10/03/11 15.38
276
Ledflex
30
75 x
75 23
42
L (mm) Alimentatore incorporato e interruttore on/off / Built-in ballast and on/off switch
Bi LFX202/300/LBI
300 1x1,2W 230V
15° LFX202/300/LBL 350mA
Ne LFX203/300/LBI
300 1x1,2W 230V
15° LFX203/300/LBL 350mA
Ga LFX219/300/LBI
300 1x1,2W 230V
15° LFX219/300/LBL 350mA
Bi LFX202/500/LBI
500 1x1,2W 230V
15° LFX202/500/LBL 350mA
Ne LFX203/500/LBI
500 1x1,2W 230V
15° LFX203/500/LBL 350mA
Ga LFX219/500/LBI
500 1x1,2W 230V
15° LFX219/500/LBL 350mA
- Corpo e ghiera in alluminio verniciato.
- Power led 1W 350mA - 2W 550mA.
- Fascio di apertura luminosa 15°.
- A richiesta fasci di apertura (30°).
- Completamente snodabile.
- Painted aluminium body and trim.
- 1W Power led with 350mA - 2W 550mA.
- Light beam 15°.
- On request lens with 30° light beam width.
- Completely adjustable.
IP 20
1 m90°
L
6350°470nm
6350°470nm
6350°470nm
6350°470nm
6350°470nm
6350°470nm
274-277 Ledflex-led joint.indd 276 10/03/11 15.38
276 277
Led joint
- Corpo e ghiera in alluminio verniciato.
- Power led 1W 350mA - 2W 550mA.
- Fascio di apertura luminosa 15°.
- A richiesta fasci di apertura (30°).
- Painted aluminium body and trim.
- 1W Power led with 350mA - 2W with 550mA.
- Light beam 15°.
- On request lens with 30° light beam width.
644758 4W max / 350 mA Alimentatore remoto / Remote ballastACC.
IP 20
L (mm) Alimentatore remoto / Remote ballast
Bi LFX102/SND/LBI
300 15° LFX102/SND/LBL
Ne LFX103/SDN/LBI
300 15° LFX103/SDN/LBL
Ga LFX119/SDN/LBI
300 15° LFX119/SDN/LBL
1 m90°
20
23
78
5,5
27
M8X
1 1x1,2W 1x2W
350mA550mA
350mA550mA
350mA550mA
1x1,2W 1x2W
1x1,2W 1x2W
6350°470nm
6350°470nm
6350°470nm
274-277 Ledflex-led joint.indd 277 10/03/11 15.38
278 279
Spot jack wall
FLOOR INSTALLAZIONE IN APPOGGIO ???????????
- Corpo in pressofusione di alluminio.
- Portalampada in porcellana.
- Cavetti in PTFE.
- Aste in acciaio cromato.
- Die-cast aluminium body.
- Porcelain lampholder.
- PTFE cable.
- Chrome steel poles.
Bi 17250 Ga 17251 50W 12V HRI GU5,3Ne 17252
Con schermo in vetro satinato / With frosted protection glassBi 17255 Ga 17256 50W 12V HRI GU5,3Ne 17257
Bi 17260 Ga 17261 50W 12V HRI G53Ne 17262
Trasformatore a parete / Wall mounting transformerBi 17130 Ne 17131
355°
IP 20
0,5 m90°
Ø 50
145
Ø 110
190
45 120
120
- Base per applique con presa Jack - Corpo in lamiera verniciata con polveri epossidiche- Interruttore- Trasformatore incorporato alla base 230/12V-50W
- Mounting plate for wall light with jack connector- Made of sheet steel, powder coated- Complete with switch- Built-in transformer 230/12V - 50W
AR111-IRC
400
250
Ø 112
200
400
250
400
250
278-281 spot jack.indd 279 10/03/11 15.39
280
Spot jack
- Corpo in pressofusione di alluminio.
- Portalampada in porcellana.
- Cavetti in PTFE.
- Aste in acciaio cromato.
- Die-cast aluminium body.
- Porcelain lampholder.
- PTFE cable.
- Chrome steel poles.
L (mm) Bi 17180 Ga 17181 186 50W 12V HRI GU5,3Ne 17182 Bi 17185 Ga 17186 376 50W 12V HRI GU5,3Ne 17187 Bi 17190 Ga 17191 576 50W 12V HRI GU5,3Ne 17192 Bi 17195 Ga 17196 231 50W 12V HRI GU5,3Ne 17197 Bi 17200 Ga 17201 421 50W 12V HRI GU5,3Ne 17202 Bi 17205 Ga 17206 631 50W 12V HRI GU5,3Ne 17207
355°
IP 20
0,5 m90°
Ø 50
L
Ø 110
L
278-281 spot jack.indd 280 10/03/11 15.39
280 281
Spot jack
L (mm) Bi 17210 Ga 17211 241 50W 12V HIG G53Ne 17212 Bi 17215 Ga 17216 431 50W 12V HIG G53Ne 17217 Bi 17220 Ga 17221 631 50W 12V HIG G53Ne 17222 AR111-IRC
AR111-IRC
AR111-IRC
Ø 112
L
Bi 17001 Trasformatore con presa jack Minirail; base in materiale Ne 17002 termoplastico, trasformatore toroidale BT 50W con termoprotettore / Transformer with minirail jack connector; ceiling plate made of thermoplastic material, containing a torroidal transformer 230/12V with thermoprotection
Bi 17046 Ne 17047 Incasso per presa per connettore Jack Cr 17048 Recessed housing for jack connectorOtt 17049
Bi 17044 Presa per spot Jack con cavetti con faston inclusi Ne 17045 Connector for spot Jack and prise pour spot Jack
ACC.
55
140
10
32
40
Ø 70
40
23 mm
50 mm
- Corpo in pressofusione di alluminio.
- Portalampada in porcellana.
- Cavetti in PTFE.
- Aste in acciaio cromato.
- Die-cast aluminium body.
- Porcelain lampholder.
- PTFE cable.
- Chrome steel poles.
355°
IP 20
0,5 m90°
278-281 spot jack.indd 281 10/03/11 15.39
284 285
- Corpo, staffa e basette in alluminio verniciato.
- Ghiera frontale e posteriore in alluminio ossidato opaco.
- Corrente di alimentazione: 350mA costante.
- Flusso luminoso: lm 95 a 350mA led bianco.- Versione per binario a bassa tensione “Minirail”
- Housing and adjustable bracket made of painted aluminium.
- Front and rear trim made of opaque oxidied aluminium.
- Supply current: 350mA constant.
- Luminous !ux: lm 95 at 350mA white led.- Version for low voltage “Minirail” track.
Spot 1 led binario
Br 17263/LBI
Br 17263/LBC 1x1,2W 24V/350mA
10°Br 17263/LBL
Ne 17264/LBI
Ne 17264/LBC 1x1,2W 24V/350mA
10°
Ne 17264/LBL
OP. A richiesta: apertura fascio 30° / On request: Light beam 30°30°
IP 20
1 m350° 180°
6350°3250°470nm 6350°3250°470nm
282-309 binari 1.indd 285 17/04/11 11.39
286
- Staffa in acciaio verniciato.
- Corpo in alluminio verniciato.
- Vetro di protezione.- Guarnizioni in gomma siliconica.- Versione per binario a bassa tensione “Minirail”
- Painted steel bracket.
- Painted aluminium housing.
- Protection glass.
- Silicon rubber gaskets.- Version for low voltage “Minirail” track
Spot 4 led binario
OP. A richiesta: apertura fascio 25° - 40° / On request: light beam 25° - 40°
25° 40°
IP 20
1 m350° 180°
52
67
ø39
20
Br 17265/LBI
Br 17265/LBC 4x1,2W 24V/350mA
10°Br 17265/LBL
Ne 17266/LBI
Ne 17266/LBC 4x1,2W 24V/350mA
10°
Ne 17266/LBL A richiesta colore Cr / On request colour Cr
6350°3250°470nm 6350°3250°470nm
282-309 binari 1.indd 286 17/04/11 11.39
286 287
Spot 7 led binario
OP. A richiesta: apertura fascio 25° - 40° / On request: light beam 25° - 40°
25° 40°
- Staffa in acciaio verniciato.
- Corpo in alluminio verniciato.
- Vetro di protezione.
- Guarnizioni in gomma siliconica.
- Versione per binario a bassa tensione “Minirail”.
- Painted steel bracket.
- Painted aluminium housing.
- Protection glass.
- Silicon rubber gaskets.- Version for low voltage “Minirail” track.
IP 20
1 m350° 180°
81
97
ø56
20
Br 17270/LBI
Br 17270/LBC 7x1,2W 24V/350mA
10°Br 17270/LBL
Ne 17271/LBI
Ne 17271/LBC 7x1,2W 24V/350mA
10°
Ne 17271/LBL A richiesta colore Cr / On request colour Cr
VENTOLA DI RAFFREDDAMENTO - Alimentazione: 12 volt dc - Potenza: 0,7 watt - Rumorosità: 13,8 dB (A)COOLING FAN - Supply: 12 volt dc - Power: 0,7 watt - Noise: 13,8 dB (A)
3000°
- Corpo in lamiera d’acciaio, vano ottico in estruso di alluminio.
- Ri!ettore in alluminio purissimo e ottica orientabile.
- Dissipatore attivo con ventola di raffreddamento, adattatore elettrico trifase.- Led bianco caldo 3000°K, senza emissioni IR e UV, resa cromatica >80 (Ra), costanza cromatica <45 SDMC.
- Housing made of sheet steel, extruded aluminium optic.
- Pure aluminium re!ector and adjustable optic.
- Active dissipator with cooling fan, electrical adapter three phase.- Warm white led 3000°K, without IR or UV emissions, chromatic ef"ciency >80 (Ra), color costancy <45 SDMC
2000
250
45
180
113
200
90
90
282-309 binari 1.indd 291 17/04/11 11.39
292 293
Junior plus
- Corpo e contenitore alimentatore in pressofusione di alluminio verniciato in polveri.
- Alimentatore elettronico integrato.
- Vetro di protezione in borosilicato.
- Adattatore elettrico trifase.
- A richiesta: apparecchio con basetta.
- Body and box of die-cast aluminium powder coated.
OP. ..../SP.... A richiesta: lente per ottica elissoidale per fascio 15° / On request: lens for elliptical optic available for 15° beam
...../CDM Apparecchio per lampada CDM-R111 - Gx8,5 Fitting for lamp CDM-R111 - Gx8,5
ACC. 644829 35W Lampada CDM-R111 / CDM-R111 lamp
644828 70W
Ø 140
282-309 binari 1.indd 301 17/04/11 11.40
302 303
Stylus
- Corpo in estruso di alluminio.
- Staffa con snodo graduato.
- Vano ottico estraibile.
- Ri!ettore in alluminio intercambiabile.
- Vetro di protezione trasparente in borosilicato.
- Verniciatura in polveri epossidiche.
- Body made of extruded aluminium.
- Adjustable support bracket.
- Removable optic tray.
- Interchangeable aluminium re!ector.
- Transparent borosilicate protection glass.
- Epoxy powder coated.
IP 20
Br 67440/10 67440/30 67440/60 Ne 67441/10
67441/30 67441/60
35W 230V MT G12
Ga 67442/10
67442/30 67442/60 Br 67440/E/10 67440/E/30 67440/E/60 Ne 67441/E/10
67441/E/30 67441/E/60
35W 230V MT G12
Ga 67442/E/10
67442/E/30 67442/E/60 Br 67450/10 67450/30 67450/60 Ne 67451/10
67451/30 67451/60
70W 230V MT G12
Ga 67452/10
67452/30 67452/60 Br 67450/E/10 67450/E/30 67450/E/60 Ne 67451/E/10
67451/E/30 67451/E/60
70W 230V MT G12
Ga 67452/E/10
67452/E/30 67452/E/60 Br 67430/10 67430/30 67430/60 Ne 67431/10
67431/30 67431/60
150W 230V MT G12
Ga 67432/10
67432/30 67432/60
1 m350°90°
OP. ..../SP.... A richiesta: lente per ottica elissoidale per fascio 10° / On request: lens for elliptical optic available for 10° beam
30°10° 60°
370
282
151
282
282-309 binari 1.indd 303 17/04/11 11.40
304 305
Sirius
- Corpo in estruso di alluminio.
- Staffa in acciaio verniciato.
- Ri!ettori in alluminio.
- Vetro di protezione trasparente in borosilicato.
- Verniciatura in polveri epossidiche.
- Body made of extruded aluminium.
- Coated steel support.
- Aluminium re!ector.
- Transparent borosilicate protection glass.
- Epoxy powder coated.
IP 20
1 m255°90°
170
220
210
140
Con adattatore Sitrack / With Sitrack adaptorBr 67200/10 67200/30 67200/60 Ne 67201/10
67201/30 67201/60
35W 230V MT G12
Ga 67202/10
67202/30 67202/60 Br 67200/E/10 67200/E/30 67200/E/60 Ne 67201/E/10
67201/E/30 67201/E/60
35W 230V MT G12
Ga 67202/E/10
67202/E/30 67202/E/60 Br 67210/10 67210/30 67210/60 Ne 67211/10
67211/30 67211/60
70W 230V MT G12
Ga 67212/10
67212/30 67212/60 Br 67210/E/10 67210/E/30 67210/E/60 Ne 67211/E/10
67211/E/30 67211/E/60
70W 230V MT G12
Ga 67212/E/10
67212/E/30 67212/E/60
Br 67197 Ne 67198
65W 230V HIG G53 -
Ga 67199
Br 67197/LBC/26 Ne 67198/LBC/26
25W - 700mA 230V - - 26°
Ga 67199/LBC/26
Br 67197/LBI/26 Ne 67198/LBI/26
25W - 700mA 230V - - 26°
Ga 67199/LBI/26
30°10° 60°
OP. ..../SP.... A richiesta: lente per ottica elissoidale per fascio 10° (non per led 111) On request: lens for elliptical optic available for 10° beam (not for led 111)
...../CDM Apparecchio per lampada CDM-R111 - Gx8,5 (non per led 111) Fitting for lamp CDM-R111 - Gx8,5 (not for led 111)
ACC. 644829 35W Lampada CDM-R111 / CDM-R111 lamp
644828 70W
AR111-IRC
LED 1113250°K
6300°K LED 111
282-309 binari 1.indd 305 17/04/11 11.40
306 307
Trace
- Corpo e vano ottico in pressofusione di alluminio.
- Parabola in alluminio purissimo trattata.
- Dispositivo di regolazione dell’apertura del fascio luminoso.
- Staffa in acciaio verniciato.
- Verniciatura in polveri epossidiche.
- Vetro di protezione.
- Ghiera reggivetro con inserti a baionetta per la sostituzione della lampada.
- Body and optic made of die-cast aluminium.
- 100% pure treated aluminium re!ector.
- Light width adjustable.
- Bracket in painted steel.
- Epoxy powder coated.
- Protection glass.
- Glass holding ring for an easy replacement of the bulb.
IP 40
Con adattatore Sitrack / With Sitrack adaptor Br 69400/EU 69400/E/EU Ne 69401/EU
69401/E/EU
35W 230V MT G12 675/676
Ga 69402/EU
69402/E/EU
Br 69410/EU 69410/E/EU Ne 69411/EU
69411/E/EU
70W 230V MT G12 677/678
Ga 69412/EU
69412/E/EU
Br 69420/EU 69420/E/EU Ne 69421/EU
69421/E/EU
150W 230V MT G12 679/680
Ga 69422/EU
69422/E/EU
Br 69430/E/EU Ne
69431/E/EU
100W 230V SDW-TG Gx12.1 681/682
Ga 69432/E/EU
1 m270°90°
ACC. Filtri colorati / Coloured "lters
146/B "ltro blu / blue "lter 146/V "ltro verde / green "lter
OP. A richiesta: opzione fascio SPOT 5°+ 5° / On request: SPOT beam option 5° + 5°
ø14
5 230
335
282-309 binari 1.indd 307 17/04/11 11.40
308 309
Bios
- Corpo e vano ottico in pressofusione di alluminio.
- Ottica estraibile per sostituzione della lampada.
- Assenza di effetto !ickering.
- Assenza di disturbi acustici.
- Parabola in alluminio purissimo.
- Fornito con adattatore per binario a tre accensioni.
- Lampadina inclusa per attacco G8,5 e Gx12.1.
- Body and optics made of die cast aluminium.
- Extractable optic for lamp replacement.
- No !ickering effects.
- No acustical noises.
- Re!ector of very pure aluminium.
- Supplied complete with adaptor for 3 circuit track.
- Lamp included for G8,5 and Gx12.1 socket.
Per lampade CDM-TC G8,5 / For lamps CDM-TC G8,5Bi 69300/E Ne 69301/E 35W 230V MT G8,5 685Ga 69302/E
Bi 69310/E Ne 69311/E 70W 230V MT G8,5 686Ga 69312/E
Per lampade MT G12 / For lamps MT G12Bi 69340/E Ne 69341/E 35W 230V MT G12 687Ga 69312/E Bi 69350/E Ne 69351/E 70W 230V MT G12 688Ga 69352/E Bi 69360/E Ne 69361/E 150W 230V MT G12 689Ga 69362/E Bi 69370/E Ne 69371/E 100W 230V SDW-TG Gx12.1 690Ga 69372/E
IP 40
CDM-TC
CDM-TC
225 18
0
25565
240 18
0
28565
282-309 binari 1.indd 309 17/04/11 11.40
310 311
Matrix evo
- Staffa e vano ottico in lamiera verniciata.
- Ghiera e gabbia in alluminio pressofuso verniciato.
- Ottica in alluminio purissimo metallizzato in alto vuoto.
- Bracket and optic module in painted sheet metal.
- Trim and cage in painted die-cast aluminium.
- Optic made of pure high vacuum metallized aluminium.
350°
IP 40
90°
Bi 68611/EU
75W
230V
HEG PAR 30S
E27Ga 68612/EU
228
ø124
310-327 binari 2.indd 311 10/03/11 15.43
312 313
Matrix evo box
- Corpo e contenitore accessori elettrici in lega di alluminio.
- Completo di adattatori elettrici e meccanici per binario Sitrack.
- Componenti elettrici protetti da un fusibile sostituibile.
- Vetro di protezione in borosilicato.
- Body and box containing the accessories made of alluminium alloy.
- Complete with electrical and mechanical adaptors.
- Electrical components protected by a fuse which can be easily replaced.
- Borosilicate protection glass.
350°
IP 40
90°
Bi 69600
65W
230V
HIG G53 Ga 69601
Bi 69605 69605/E
35W
230V
MT
G12 60° 695/698Ga 69606 69606/E
Bi 69607 69607/E 70W
230V
MT
G12 60° 696/699
Ga 69608 69608/E
Bi 69609 69609/E 150W
230V
MT
G12 60° 697/700
Ga 69610 69610/E
Bi 69615 35W
230V
MT
G8,5 60° 701
Ga 69616
Bi 69617 70W
230V
MT
G8,5 60° 702
Ga 69618
Scelta opzione fascio per lampade MT .../SP
Beam option choose for MT lamp
CDM-TC
CDM-TC
AR111-IRC
228
ø124
70
200 156
156
228
ø124
70
330
ACC. 3095 Griglia antiabbagliante solo per apparecchi con attacco G12 - G8,5 Anti-glare grid only for G12 - G8,5 lamps
644829 35W Lampada CDM-R111 / CDM-R111 lamp
644828 70W
OP. ...../CDM Apparecchio per lampada CDM-R111 - Gx8,5 Fitting for lamp CDM-R111 - Gx8,5
20°
Lampada LED 111 in alternativa a lampada AR 111, vedi sezione LAMPADE
LED 111 lampalternatively for AR 111 lamp, see LAMPS section
310-327 binari 2.indd 313 10/03/11 15.43
314 315
Mec
- Proiettore per binario Sitrack.
- Gruppo ottico orientabile.
- Corpo apparecchio e contenitore accessori per cablaggio elettrico in lega di alluminio.
- Spot light for Sitrack.
- Adjustable optic.
- Housing of the spotlight and box containing the accessories for the electrical wiring made of aluminium alloy.
Ne 69780
1x18W LED G53Ga 69781 Ne 69782
1x65W 230V HIG G53Ga 69783 Ne 69784
1x35W 230V MRS/UB Gx8,5Ga 69785 Ne 69786
1x70W 230V MRS/UB Gx8,5Ga 69787 Ne 69788
1x35W 230V MT G12
Ga 69789 Ne 69790
1x70W 230V MT G12Ga 69791
IP 20
355° 180°
156
107
7012
0
156
90
AR111
CDM-R111
CDM-R111
ø 111
85
ø 111
85
ø 111
90
ø 125
155
Min. 250 mm Min. 200 mm
Min
. 250
mm
Max
. 32
mm
310-327 binari 2.indd 315 10/03/11 15.43
316
Tratto
- Corpo in pressofusione di alluminio verniciato in polveri.
- Vetro di protezione in Borosilicato.
- Die-cast aluminium powder coated body.
- Borosilicate protection glass.
Con adattatore Sitrack / With Sitrack adaptor Bi 68125/EU Ne 68126/EU 35W 230V MT G12 20° 705Ga 68124/EU Bi 68130/EU Ne 68131/EU 70W 230V MT G12 20° 707Ga 68129/EU Bi 68127/EU Ne 68128/EU 35W 230V MT G12 40° 706 Ga 68134/EU Bi 68132/EU Ne 68133/EU 70W 230V MT G12 40° 708Ga 68137/EU
COMPONENTI / COMPONENTSBi 493602 Ne 493603
Staffa per aggancio meccanico / Bracket for mechanical fi xing
Bi 990991 Ne 990992 Adattatore meccanico for SITRACK / Mechanical adaptor for SITRACK
Bi 990831 Ne 990832
Bloccacavo for SITRACK / Cable-clamp for SITRACK
IP 20
1 m350° 180°
ACC. 3025 Filtro UV / UV fi lter
315
Ø 147
Ø 175
310-327 binari 2.indd 316 10/03/11 15.43
316 317
Tratto 2
- Corpo in pressofusione di alluminio verniciato in polveri.
- Completo di vetro di protezione in Borosilicato.
- Staffa a doppio snodo con rotazione orizzontale del corpo dell’apparecchio per minimizzare gli ingombri verticali.
- Die-cast aluminium powder coated body.
- Borosilicate protection glass.
- Double bracket joint for horizontal plane rotation to minimize the encumbered.
Bi 68125/EU/N Ne 68126/EU/N 35W 230V MT G12 20° 705Ga 68124/EU/N Bi 68130/EU/N Ne 68131/EU/N 70W 230V MT G12 20° 707Ga 68129/EU/N Bi 68127/EU/N Ne 68128/EU/N 35W 230V MT G12 40° 706Ga 68134/EU/N Bi 68132/EU/N Ne 68133/EU/N 70W 230V MT G12 40° 708Ga 68137/EU/N
IP 20
1 m350° 180°
289
Ø 147
201
317
ACC. 3025 Filtro UV / UV filter
310-327 binari 2.indd 317 10/03/11 15.43
318
Tratto box
- Corpo apparecchio e contenitore accessori per cablaggio elettrico in lega di alluminio.
- Componenti elettrici protetti da un fusibile sostituibile.
- Vetro di protezione in borosilicato.
- Adjustable indoor spotlight for metal halide and high pressure sodium lamps.
- Body and box containing the accessories made of aluminium alloy.
- Electrical components protected by a fuse which can be easily replaced.
- Borosilicate protection glass.
Con adattatore Sitrack / With Sitrack adaptor Bi 69120 69120/E Ne 69121 69121/E 35W 230V MT G12 20° 705Ga 69122 69122/E Bi 69130 69130/E Ne 69131 69131/E 70W 230V MT G12 20° 707Ga 69132 69132/E Bi 69135 69135/E Ne 69136 69136/E 150W 230V MT G12 20°Ga 69137 69137/E
Bi 69140 69140/E Ne 69141 69141/E 35W 230V MT G12 40° 706Ga 69142 69142/E Bi 69150 69150/E Ne 69151 69151/E 70W 230V MT G12 40° 708Ga 69152 69152/E Bi 69155 69155/E Ne 69156 69156/E 150W 230V MT G12 40°Ga 69157 69157/E
IP 20
355° 180°
70
156
Ø 147
330
205
70
OP. 644829 35W Apparecchio per lampada CDM-R111 - Gx8,5644828 70W Fitting for lamp CDM-R111 - Gx8,5
ACC. 3025 Filtro UV / UV filter
310-327 binari 2.indd 318 10/03/11 15.43
318 319
Tratto box
Bi 69100Ne 69101 65W 230V HIG G53 Ga 69102
Bi 69105Ne 69106 2x75W 230V HIG G53 Ga 69107
AR111-IRC
AR111-IRC
156
207
70
200
ø116
156
207
70
200
ø116ø116
- Corpo apparecchio e contenitore accessori per cablaggio elettrico in lega di alluminio.
- Componenti elettrici protetti da un fusibile sostituibile.
- Body and box containing the accessories made of aluminium alloy.
- Electrical components protected by a fuse which can be easily replaced.
IP 20
355° 180°
310-327 binari 2.indd 319 10/03/11 15.43
320
- Corpo in pressofusione di alluminio verniciato in polveri.
- Predisposto per binario Sitrack completo di adattatore elettrico e meccanico.
- Vetro di protezione in Borosilicato.
- Die-cast aluminium body, powder coated.
- For sitrack track, complete with adaptor, mechanical adaptor and cable gland.
- Borosilicate protection glass.
Bi 68280/EU/N Ne 68281/EU/N 70W 230V MD Rx7s 715Ga 68282/EU/N Bi 68285/EU/N Ne 68286/EU/N 150W 230V MD Rx7s 716Ga 68287/EU/N Bi 68320/EU/N Ne 68321/EU/N 100W 230V SHT PG12-1 717Ga 68322/EU/N
IP 40
1 m270° 180°
Tratto maxi
280
200
275
50
Bi 3065Ne 3066 Alette rettangolari / Rectangular flapsGa 3065/Ga
3050 Filtro UV per Rx7s / UV filter for Rx7s
ACC.
310-327 binari 2.indd 320 10/03/11 15.43
320 321
Tratto maxi
Bi 68380/EU Ne 68381/EU 70W 230V MT G12 20° 718Ga 68382/EU
Bi 68385/EU Ne 68386/EU 150W 230V MT G12 20° 720Ga 68387/EU
Bi 68310/EU Ne 68311/EU 70W 230V MT G12 40° 719Ga 68312/EU
Bi 68315/EU Ne 68316/EU 150W 230V MT G12 40° 721Ga 68317/EU
ACC. Filtri in vetro per MT / Glass fi lters for MT
146/B fi ltro blu / blue fi lter 146/V fi ltro verde / green fi lter
146/R fi ltro rosso / red fi lter 146/G fi ltro giallo / yellow fi lter
3025 Filtro UV / UV fi lter
Ø 147
300
215
50
- Corpo in pressofusione di alluminio verniciato in polveri.
- Predisposto per binario Sitrack completo di adattatore elettrico e meccanico.
- Vetro di protezione in Borosilicato.
- Die-cast aluminium body, powder coated.
- For sitrack track, complete with adaptor, mechanical adaptor and cable gland.
- Corpo, gruppo ottico, orientabile in pressofusione di alluminio.
- Parabola in alluminio purissimo.
- Vetro di protezione temperato.
- Gruppo di alimentazione inserito nell’apparecchio.
- Body lamp compartment and wall plate made of die-cast aluminium.
- Re!ector of very pure aluminium.
- Tempered protection glass.
- Built-in ballast.
Bi J601/A Ne J602/A
70W 230V MD Rx7s 760
Bi J611/A Ne J612/A
150W 230V MD Rx7s 761
Bi S107/A Ne S108/A
100W 230V STH PG12-1 762
Bi 3205/A Ne 3206/A
300W
230V
HDG R7s 765
COMPONENTI / COMPONENTSBi 990921 Ne 990922 Adattatore per SITRACK / Adaptor for SITRACK Bi 990991 Ne 990992 Adattatore meccanico for SITRACK / Mechanical adaptor for SITRACK
Bi 990831 Ne 990832
Bloccacavo for SITRACK / Cable-clamp for SITRACK
IP 40
1 m
Bi 3065 Alette / Flaps
Ne 3066
3050 Filtri UV / UV "lter
ACC.
155° 155°355°
L 117 mm
365
225 90
295
200 90
328-339 binari 3.indd 337 17/04/11 11.42
338 339
Walker
- Spot a bassa tensione per binario Minirail
- Corpo in pressofusione di alluminio verniciato in polveri epossidiche
- Spot with Minirail track adaptor
- Body made of die-cast aluminium, epoxy powder coated355°
IP 20
0,5 m90°
Con adattatore per binario Minirail / With Minirail track adaptorBi 17160 Ga 17161 50W 12V HRI GU5,3Ne 17162
Con adattatore per binario Minirail / With Minirail track adaptorBi 17165 Ga 17166 50W 12V HRI GU5,3Ne 17167
Con adattatore per binario Minirail / With Minirail track adaptorBi 17170 Ga 17171 50W 12V HIG G53Ne 17172 AR111-IRC