This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Stylage Product Sheet - 13/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 1/11
Elegant and comfortable solution for creating ambiance LensoFlex®2 photometric engine with photometry adapted to various applications
FutureProof: easy replacement of photometric engine and power supply on-site Designed to incorporate Owlet range of control solutions: autonomous network and interoperable network No light pollution in flat-glass version
Energy savings of up to 75% compared with traditional light sources ThermiX® for long lasting performance Surge protection 10kV
TYPES OF APPLICATION
Urban roads and streets
Residential streets Squares and pedestrian areas Parks Car parks
Bike paths Bridges
Stylage Product Sheet - 13/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 2/11
Designer : Michel Tortel STYLAG (STYLAGE) Length (mm) 373 Width (mm) 373 Height (mm) 704 Weight (kg)** 7 Tightness level* IP 66 Impact resistance* IK 08 Electrical class* Class I EU, Class II EU Aerodynamic resistance (CxS) 0.125m²
* According to IEC-EN60598 and IEC-EN62262 ** Average weight. The max weight is +/- 10 % more but for the exact weight according to the configuration, please contact us.
SUMMARY
CONCEPT • Traditional luminaire for urban and residential roads and parks HOUSING & FINISH • Body and 4 arms in corrosion free, high-pressure, die-cast aluminium, polyester powder coated • Body without ribs to avoid dirt/sand accumulation. • Hardened horizontal flat glass or deep UV resistant polycarbonate protector • Colour: AKZO grey 900 sanded INSTALLATION • Post-top mounting on vertical mast with 60mm diameter spigot or with male ¾” gas thread or suspended tube 3/4 “ female gas thread, secured by a counter nut. • Delivered with pre-fitted electrical supply cable. OPTICAL UNIT • “FutureProof” optical unit, enclosed in top cover with driver, replaceable on-site, with IP rated connectors for quick operations • Flatbed PCB with acrylic lens overlay principle: 3 photometric distributions (residential street, square, road) • CRI > 70 • ULOR (flat glass version ): 0 %
Stylage Product Sheet - 13/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 3/11
1. Thermix® for long lasting performance The thermal management of LEDs is crucial for a luminaire’s reliability To maximise effectiveness and maintain flux over time, several parameters are optimised:
Thermal compartmentalisation between the LEDs and the control gear
Direct conduction by minimising the path between the heat source and the outside
Optimised design of the external heat exchange surface
2. FutureProof: Smart Upgradability Since LED technology is constantly evolving, both the photometric engine and the gears can be replaced at the end of the LEDs’ lifespan to take advantage of future technological developments
OPTIONS
1. OWLET wireless remote management dimming & control system
The luminaires are pre-programmable, wireless programmable or remotely programmable and controllable. Each individual light point can be switched off/on or dimmed at any time. Operating state, energy consumption and failures are reported and stored in a database with the exact timestamp and geographical location. Owlet helps lighting managers to assure the right lighting level while reducing operating costs and maintaining a sustainable outdoor lighting scheme. The wireless Luminaire Controllers (LuCo) exist in different types, all of them are compatible with each other.
1. Shows status of all light points per zone, per street…
4. Alarm schemes (failures, faults, consumption via SMS, phone, email)
5. Connects to 3rd party systems
6. Data exchange with other servers
7. Data management
Available Luminaire Controllers:
LuCo-PD: Wireless Individual Luminaire Controller with integrated photocell that is mounted on top of the luminaire. Connected to the driver via a cable.
LuCo-NXP: Wireless Individual Luminaire Controller integrated inside the luminaire with shark fin antenna on top.
Both types of luminaire controllers can control of individual luminaires or clusters of luminaires. They build a bi-directional mesh network amongst each other to the Segment Controller (one SeCo per 100/150 light points).
The above mentioned LuCo’s, are commissioned either manually in the web GUI (Graphical User Interface) or via the use of a wireless handheld device that allows automatic geo-positioning on the Owlet NightShift GUI.
Stylage Product Sheet - 13/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 5/11
Custom dimming profile; Constant Light Output (CLO); Bi-Power dimming and Dali are available.
2.1 Custom Dimming
This option enables dimming profiles with up to 5 levels to adapt the light according to the real needs during the night. The dimming profile can be set up in two ways. The standard way determines the dimming profiles based on the middle of the night and is fully operational after 3 full nights. The second way (on request) determines that the night starts from the moment that the lights are switched on. The dimming profiles are immediately operational.
2.2 Constant Light Output
This system compensates for the depreciation of luminous flux and to avoid excess lighting at the beginning of the installation's service life, providing substantial energy savings.
2.3 Bi-Power functionality
In several countries an extra wire, a so-called control wire or switched line, is distributed throughout the street lighting network. In most cases, when the street lighting is switched on, both the line and the switched line are energized to the 230V level. At a certain point during the night this switched line is switched off from the grid. The bi-power driver detects this signal as a command to reduce the output current to a lower preset value. In most cases this value equals 50%.
Standard lighting consumption LED lighting consumption with CLO Energy savings
Stylage Product Sheet - 13/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 6/11
Note: The flux is an indicative average and may vary with the different optics and types of protector. Tolerance on LED flux is ± 7% and on total luminaire power ± 5 %.
The precise flux and corresponding matrix for each configuration are available on www.schreder.com.
Stylage Product Sheet - 13/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com. 8/11
Go to the Ordering Data page(s) and compose your solution by choosing one code per column in order to specify the PRODUCT ID, COUNTRY (of installation), OPTICal BlOCK, GeaRS,
CONTROlS, FIxaTIONS and COlOUR. You may choose several OPTIONS.
Configure your solution easily: most of the proposed options do not require any additional information and are briefly explained below the
code (refer to the footnotes to check compatibility between the selected options).
Choose your Flux, Photometry and Control codes by referring to more detailled infor-mation included in the Product Sheet.
HOw TO CReaTe a valID ORDeRING CODe ?
Depending on your choice of colour temperature, please refer to the corresponding table to find the flux code for the typical lumen package you require(*). Please check the Product ID to make sure that the lumen package you need is avail-able with the size you have chosen.
To choose the photometry, refer to the 4 digit codes beside the curves and diagrams(*). AS = asymmetrical, SY = symmetrical and BL = Back Light control.
(*) The precise flux and corresponding matrix for each configuration are available on www.schreder.com
To configure the ideal solution between the features you need and the available controllers, refer to the description in the Product sheet.
1
2
3
Product ID
(6 digits)
Universal(2 digits)
Colour temperature + Flux code
(7 digits)
Photometry type
(6 digits) Protector type
(2 digits)
Voltage & elec. class + Dimming
+ Elec. protection (8 digits)
Power cable type
(4 digits)
Controller + Photocell +
Sensor(4 digits)
Colour(2 digits)
OnLY wiTh STAnDArD feATureS
wiTh cuSTOmiSeD
requeSTS
ISO 3166 country
code(2 digits)
Custom photometry
Voltage & elec. class + Custom
dimming + Elec. protection (8 digits)
Custom power cable
(4 digits)
Custom contr., Photocell &
Sensor(4 digits)
Customised options (Photometry, Dimming, cables, control & Photo-
cell) for which you will receive a specific code (4 digits each)
Notes: +++ No Cable' only possible for 'Flat glass' version +++ LuCo-NXP and LuCo-ADP available only with D15 Telemanagement
[1] Please provide country of installation to ensure country specific settings are taken into account. Schréder will provide you the code to use (00 (universal standard) or the country's ISO code).
Your Order
Stylage Product Sheet - 13/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com