Stump Grinder FC Stump Grinder FC Series Series Application areas: Application areas: Application areas: Application areas: Application areas: Application areas: Application areas: Application areas: Forestry, Gardening, Construction Suitable for: Suitable for: Suitable for: Suitable for: Suitable for: Suitable for: Suitable for: Suitable for: excavator, backhoe loader, from 1,500 to 10,000 Kg History: History: History: History: History: History: History: History: the first stump grinder to be built in January 2009, after a long intensive testing. Production: Production: Production: Production: Production: Production: Production: Production: To give an example of grinding efficiency, for a stump with 400 mm diameter, deep 400 mm, using the FC 10 the job is done in approximately 15 minutes. Advantages: Advantages: Advantages: Advantages: Advantages: Advantages: Advantages: Advantages: Compared to the traditional way to approach the job there is an important time saving to consider. The job is easily done by the operator without any heavy work and in a safe mode. Thanks to the small dimension and it can be used in reduced space. www.officinemalaguti.it www.officinemalaguti.it Officine Malaguti Via XXI Aprile 1945, 60, 40019 Sant Officine Malaguti Via XXI Aprile 1945, 60, 40019 Sant’ Agata Bolognese, Bologna Agata Bolognese, Bologna – Italy. Tel Italy. Tel 0039 051 956215. Email 0039 051 956215. Email [email protected] [email protected]