Study of Cracking Susceptibility in Similar and Dissimilar Welds Between Carbon Steel and Austenitic Stainless Steel Through Finger Test and FE Numerical Model Nereyda Alcantar-Modragón Instituto Tecnologico de Morelia Victor Garcia Garcia ( [email protected] ) Instituto Tecnologico de Morelia Francisco Reyes-Calderon Instituto Tecnologico de Morelia Julio César Villalobos-Brito Instituto Tecnologico de Morelia Héctor Javier Vergara-Hernández Instituto Tecnologico de Morelia Research Article Keywords: Dissimilar metal welding, GMAW, FEM, Cracking susceptibility, Finger test, Corrosion Posted Date: March 31st, 2021 DOI: https://doi.org/10.21203/rs.3.rs-354115/v1 License: This work is licensed under a Creative Commons Attribution 4.0 International License. Read Full License Version of Record: A version of this preprint was published at The International Journal of Advanced Manufacturing Technology on July 12th, 2021. See the published version at https://doi.org/10.1007/s00170-021-07596-0.
Study of Cracking Susceptibility in Similar and Dissimilar Welds Between Carbon Steel and Austenitic Stainless Steel Through Finger Test and FE Numerical Model
May 28, 2023
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Related Documents
![Introduction · Web view] tried to validate simulations of the welding of two dissimilar pipes, one made of a low alloy steel and the other made of an austenitic stainless steel.](https://static.cupdf.com/doc/110x72/5fe8db3b558b550fe55e601b/introduction-web-view-tried-to-validate-simulations-of-the-welding-of-two-dissimilar.jpg)
