-
www.editrice-esculapio.it
Euro 25,00
Composite materials have aroused a great interest over the last
few decades, as proven by the huge number of scientifi c papers and
industrial progress. The increase in the use of composite
structures in different engineering practices justify the present
international meeting where researches from every part of the globe
can share and discuss the recent advancements regarding the use of
structural components within advanced applications such as
buckling, vibrations, repair, reinforcements, concrete, composite
laminated materials and more recent metamaterials.
Studies about composite structures are truly multidisciplinary
and the given contributions can help other researches and
professional engineers in their own fi eld. This Conference is
suitable as a reference for engineers and scientists working in the
professional fi eld, in the industry and the academia and it gives
the possibility to share recent advancements in different
engineering practices to the outside world. This book aims to
collect selected plenary and key-note lectures of this
International Conference.
For this reason, the establishment of this 20th edition of
International Conference on Composite Structures has appeared
appropriate to continue what has been begun during the previous
editions. ICCS wants to be an occasion for many researchers from
each part of the globe to meet and discuss about the recent
advancements regarding the use of composite structures, sandwich
panels, nanotechnology, bio-composites, delamination and fracture,
experimental methods, manufacturing and other countless topics that
have fi lled many sessions during this conference. As a proof of
this event, which has taken place in Paris (France), selected
plenary and key-note lectures have been collected in the present
book.
TITLES IN THIS SERIES:
F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola Laminated
Composite Doubly-Curved Shell Structures - Differential Ge-ometry
Higher-Order Structural Theories - 1st Ed. 2016 - ISBN:
978-88-7488-958-7
F. Tornabene, N. Fantuzzi, M. Bacciocchi, E. Viola Laminated
Composite Doubly-Curved Shell Structures - Differential and
Integral Quadrature Strong Formulation Fi-nite Element Method - 1st
Ed. 2016 - ISBN: 978-88-7488-958-7
F. Tornabene, N. Fantuzzi Mechanicsof Laminated Composite
Doubly-Curved Shell Structures - 1st Ed. 2014 - ISBN:
9788874886876
SPB2015 - International Conference on Shells Plates and Beams -
Editors: A. J.M. Ferreira, E. Viola, F. Tornabene - Ed. 2015 -
ISBN: 9788874888863
F. Tornabene, R. Dimitri Stabilit dellequi-librio elastico - 1st
Ed. 2015 - ISBN: 9788874888450
U. Andreaus Scienza delle Costru-zioni - Ed. 2016 - Volume unico
- ISBN: 9788874889266
A. Taliercio Introduzione alla Mecca-nica dei Solidi - 2nd Ed.
2014 - ISBN: 9788874887781
A. Taliercio Meccanica dei Sistemi di Tra-vi 2nd Ed. 2009 -
ISBN: 9788874882069
A. Taliercio, A. Corigliano MeccanicaComputazionale - 1st Ed.
2005 - ISBN: 9788874881888
A. Frangi Cinematica e Statica dei Siste-mi di Corpi Rigidi -
3rd Ed. 2013 - ISBN: 9788874886210
R. Brighenti Analisi Numerica dei Soli-di e delle Strutture -
1st Ed. 2014 - ISBN: 9788874887989
S. Lenci, F. Clementi I compositi nellin-gegneria strutturale -
1st Ed. 2009 - ISBN: 9788874883387
D. Bigoni, A. Di Tommaso, M. Gei, F. Laudiero, D. Zaccaria
Geometria delle Masse - 1st Ed. 1995 - ISBN: 9788874887149
STRUCTURAL AND COMPUTATIONAL MECHANICS BOOK SERIES
ISSN 2421-2822
ISBN 978-889-385-041-4
Edited by
Antonio J.M. FerreiraWalid LarbiJean-Franois DeuFrancesco
TornabeneNicholas Fantuzzi
The Esculapio Series in Structural and Com-putational Mechanics
has been inaugurated with the aim of arranging a series of books in
these key fi elds related to academic rese-arch, education and
industrial applications. The Esculapio Series publishes high-level
texts for academic students, deep studies on good practice and
industrial technology, interesting and fundamental research topics
related to industrial development and engi-neering practices. The
readership encapsu-lates undergraduate and PhD students,
re-searchers, scientists and free-lancers within applied mechanics
topics. Civil/structural, mechanical, aerospace, naval, nuclear,
auto-motive, materials, environmental, electrical, and biomedical
engineers could benefi t from this book series. The present book
series would be the natural home for authors pro-fi cient in
mechanics of materials, mechanics of structures as well as
computational and applied mechanics.
The Esculapio Series will focus on the fol-lowing research
areas, but not limited to:
Applied mechanics Applied mathematics Computational mechanics
Theoretical modeling Engineering structures Typical materials:
concrete, metal, wood, masonry, etc. Classical and advanced
numerical
methods Composite Materials Nonlinearities Repair and
reinforcements Meta-materials and advanced
materials SMART structural components
STRUCTURAL AND COMPUTATIONAL MECHANICS BOOK SERIES
PROCEEDINGS
Conservatoire National des Arts et Mtiers4-7 September 2017
ICCS2020TH INTERNATIONAL CONFERENCE
ON COMPOSITE STRUCTURES
ICCS20
20Th In
tern
atio
nal Co
nfe
rence
on Co
mposite
Structu
res
Tornabene copertina_ICCS20_proceedings.indd 1 24/07/2017
11:39:28
-
Conservatoire national des arts et mtiers, Paris, France 4-7
September 2017
PROCEEDINGS CONFERENCE CHAIRS
LOCAL ORGANIZING COMMITTEE
-
Editor in chief:
Scientific Committee:
Chief assistant:
First edition:
Publishing Manager:Editorial Staff:
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Pierre Ladevze (Professor Emeritus ENS Cachan Scientific Head of
the Structures and Systems Division-LMT Cachan, France)
Hu Heng (Wuhan University, China)
Michele dOttavio (Universit Paris Ouest - Nanterre - La Dfense,
France)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Bruno Castani (Head of Composite Group, Institut Clment Ader,
University of Toulouse, France)
Dai Gil Lee (Korea Advanced Institute of Scince and Technology,
South Korea)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Seung Hwan Chang (LINC Chung-Ang University, Seoul Korea)
Paul Weaver (University of Limerick, Ireland, University of
Bristol, UK)
Eelco Jansen (Institute of Structural Analysis, Leibniz
University Hannover, Germany)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Philippe Boisse (Directeur de l'Ecole Doctorale MEGA de Lyon,
France)
Conor McCarthy (University of Limerick, Ireland)
Joo Rama Correia (Instituto Superior Tcnico, CEris, Universidade
de Lisboa, Portugal)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Kim Meow Liew (City University of Hong Kong, China)
Erasmo Carrera (MUL2 group, DIMEAS, Politecnico di Torino,
Italy) Alfonso Pagani (MUL2 group, DIMEAS, Politecnico di Torino,
Italy) Marco Petrolo (MUL2 group, DIMEAS, Politecnico di Torino,
Italy)
Gennady Kulikov (Tambov State Technical University, Russia)
Volnei Tita (University of So Paulo, Brazil)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Christophe Binetruy (Ecole Centrale de Nantes, France)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Yunli Guo (Key Laboratory for Liquid-solid Structural Evolution
& Processing of Materials (Ministry of Education), Shandong
University, China) Qi Dong (Key Laboratory for Liquid-solid
Structural Evolution & Processing of Materials (Ministry of
Education), Shandong University, China) Yuxi Jia
([email protected], Key Laboratory for Liquid-solid Structural
Evolution & Processing of Materials (Ministry of Education),
Shandong University, China)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Baorui Liu ([email protected], Beijing Institute of Structure
and Environment Engineering, China) Zhengping Zhang (Beijing
Institute of Structure and Environment Engineering, China) Haibo Li
(Beijing Institute of Structure and Environment Engineering, China)
Fanjin Kong (Beijing Institute of Structure and Environment
Engineering, China) Zhenqiang Wu (Beijing Institute of Structure
and Environment Engineering, China) Wugang Liu (Beijing Institute
of Structure and Environment Engineering, China)
Haitao Tian ([email protected], LEM3 France) Michel
Potier-Ferry (LEM3, France) Farid Abed-Meraim (LEM3, France)
Damian Soko owski ([email protected], Faculty of Civil
Engineering, Architecture and Environmental Engineering d
University of Technology, Poland) Marcin Kami ski (Department of
Structural Mechanics, d University of Technology Faculty of Civil
Engineering, Architecture and Environmental Engineering,
Poland)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Aurora Angela Pisano ([email protected], University
Mediterranea of Reggio Calabria, Italy) Paolo Fuschi (University
Mediterranea of Reggio Calabria, Italy)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Daniel, E.S. Rodrigues ([email protected], Institute of Science
and Innovation in Mechanical and Industrial Engineering (INEGI),
University of Porto, Portugal) Jorge, Belinha (Institute of Science
and Innovation in Mechanical and Industrial Engineering (INEGI),
University of Porto, Portugal) Aurlio, L. Arajo (Instituto Superior
Tcnico, University of Lisbon, Portugal) Antnio, J.M. Ferreira
(Institute of Science and Innovation in Mechanical and Industrial
Engineering (INEGI), University of Porto, Portugal) Lcia, M.J.S.
Dinis (Institute of Science and Innovation in Mechanical and
Industrial Engineering (INEGI), University of Porto, Portugal)
Renato, M. Natal (Institute of Science and Innovation in Mechanical
and Industrial Engineering (INEGI), University of Porto,
Portugal)
Giuseppe, Catania (Alma Mater Studiorum University of Bologna,
Italy) Matteo, Strozzi ([email protected], Alma Mater
Studiorum University of Bologna, Italy)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Fuxing Miao ([email protected], Ningbo University, China
Fenghua Zhou (Ningbo University, China Zhiwei Cui, (Vehicle
Optimization Group, General Motors)
Evangelos Sapountzakis ([email protected], School of
Civil Engineering, National Technical University of Athens, Greece)
Ioannis Dikaros (School of Civil Engineering, National Technical
University of Athens, Greece)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Xiangkun Sun (LTDS, Ecole Centrale de Lyon, France) Changwei
Zhou (Laboratoire d Acoustique de l'Universit du Maine, France)
Mohamed Ichchou ([email protected], LTDS, Ecole Centrale
de Lyon, France) Abdel-Malek Zine (ICJ, Ecole Centrale de Lyon,
France) Jean-Pierre Lain (LTDS, Ecole Centrale de Lyon, France)
Stephane Hans (LTDS, Ecole Nationale des Travaux Publics de lEtat,
France) Claude Boutin (LTDS, Ecole Nationale des Travaux Publics de
lEtat, France)
Viswanathan, Kodakkal Kannan ([email protected], Kuwait College
of Science and Technology, Kuwait) Nor Hafizah, Ahmad Kailani (UTM
Centre for Industrial and Applied Mathematics, Universiti Teknologi
Malaysia, Malaysia) Zainal, Abdul Aziz (UTM Centre for Industrial
and Applied Mathematics, Universiti Teknologi Malaysia,
Malaysia)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Piotr Lacki (Czestochowa University of Technology, Poland) Anna
Derlatka ([email protected], Czestochowa University of
Technology, Poland)
Avelino Manuel da Silva Dias ([email protected], UFRN,
Brazil) Pedro Ponces Camanho (FEUP, Portugal)
Tams Plskei ([email protected], Budapest University of
Technokogy and Economics, Department of Applied Mechanics,
Hungary)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Balavishnu Udayakumar ([email protected], Aerospace
Engineering, IIT Madras, India) K.V. Nagendra Gopal (Aerospace
Engineering, IIT Madras, India)
Guo-dong Xu (Harbin University of Science and Technology, China)
Tao Zeng ([email protected], Harbin University of Science and
Technology, China) Su Cheng (Harbin University of Science and
Technology, China) Zhi-hai Wang (Harbin University of Science and
Technology, China)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Riccardo, Vescovini ([email protected], Politecnico
di Milano, Italy) Lorenzo, Dozio (Politecnico di Milano, Italy)
Michele, D'Ottavio (Universit Paris Nanterre, France) Olivier,
Polit (Universit Paris Nanterre, France)
Sarat, Panda ([email protected], Indian Institute of
Technology(ISM) Dhanbad, India) Amit, Yadav (Indian Institute of
Technology(ISM) Dhanbad, India)
Min Hye, Jung (Korea Institute of Carbon Convergence Technology;
Chonbuk National University, South Korea) Jeong Seok, Kang (Korea
Institute of Carbon Convergence Technology; Chonbuk National
University, South Korea) Hans-Christian Frh (Institut fr
Textiltechnik (ITA) der RWTH Aachen University, Aachen, Germany)
Christoph Greb (Institut fr Textiltechnik (ITA) der RWTH Aachen
University, Aachen, Germany) Seong Su, Kim ([email protected],
Korea Advanced Institute of Science and Technology (KAIST), South
Korea)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Dongil Shin (Seoul National University, South Korea) Soomin Choi
(Seoul National University, South Korea) Gang-Won Jang (Sejong
University, South Korea) Yoon Young Kim ([email protected], Seoul
National University, South Korea)
Sigong, Zhang (University of Waterloo, Canada) Lei Xu
([email protected], University of Waterloo, Canada)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Xiandong, Zhou (Department of Mechanics and Engineering Science,
College of Engineering, Peking University, China) Kefu, Huang
([email protected], Department of Mechanics and Aerospace
Engineering, Southern University of Science and Technology, China)
Zheng, Li (Department of Mechanics and Engineering Science, College
of Engineering, Peking University, China)
Chang Hongliang ([email protected], College of Aerospace
and Civil Engineering, Harbin Engineering University, China) Li
Hong (College of Aerospace and Civil Engineering, Harbin
Engineering University, China)
Can Serkan Ibrahimoglu ([email protected], Middle
East Technical University, Aerospace Engineering Department,
Turkey) Altan Kayran (Middle East Technical University, Aerospace
Engineering Department., Turkey)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Ghazaleh, Soltanieh (Department of Civil and Environmental
Engineering, Amirkabir University of Technology, Tehran, Iran)
Mohammad Z., Kabir ([email protected], Department of Civil and
Environmental Engineering, Amirkabir University of Technology,
Tehran, Iran) Mohammad Shariyat ([email protected], Faculty of
Mechanical Engineering, K.N. Toosi University of Technology,
Tehran, Iran)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Sylwester Samborski ([email protected], Lublin University of
Technology, Poland)
Muthana S M Al-Saymaree ([email protected], Cardiff
University, UK) David Kennedy (Cardiff University, UK) Carol
Featherston (Cardiff University, UK)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Alexandre, Loredo ([email protected], Universit de
Bourgogne Franche-Comt, France) Olivier, Polit (Universit Paris
Nanterre, France) Michele, D'Ottavio (Universit Paris Nanterre,
France) Philippe, Vidal (Universit Paris Nanterre, France)
Thi Huyen Cham, Le ([email protected], Universit
Paris Nanterre, France) Michele, D'Ottavio (Universit Paris
Nanterre, France) Philippe, Vidal (Universit Paris Nanterre,
France) Olivier, Polit (Universit Paris Nanterre, France)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Karolina Wi niewska
([email protected], Institute of
Applied Mechanics, Poznan University of Technology, Poland) Ewa
Magnucka-Blandzi (Institute of Mathematics, Poznan University of
Technology, Poland)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Miroslav Repka ([email protected], Institute of
Construction and Architecture, Slovak Academy of Sciences,
Slovakia) Vladimir Sladek (Institute of Construction and
Architecture, Slovak Academy of Sciences, Slovakia) Jan Sladek
(Institute of Construction and Architecture, Slovak Academy of
Sciences, Slovakia)
Yu Wang (School of Engineering, RMIT University, Australia)
Chuang Feng ([email protected], School of Engineering, RMIT
University, Australia) Zhan Zhao (School of Engineering, RMIT
University, Australia) Lili Li (School of Engineering, RMIT
University, Australia) Jie Yang (School of Engineering, RMIT
University, Australia)
Iwona Wstawska ([email protected], Institute of
Applied Mechanics, Poznan University of Technology, Poland)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Jamshid, Fazilati ([email protected], Aerospace Research
Institute, Iran)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Vahid, Khalafi (Aerospace Research Institute, Iran) Jamshid,
Fazilati ([email protected], Aerospace Research Institute,
Iran)
Viswanathan, Kodakkal Kannan ([email protected], Kuwait College
of Science and Technology, Kuwait) Nurul Izyan, Mat Daud (Dept. of
mathematical Sciences, Faculty of Science, Universiti Teknologi
Malaysia, Malaysia) Jang Hyun, Lee (Dept. of Naval Architecture and
ocean Engineering, Inha University, Korea South) Zainal, Abdul Aziz
(Dept. of mathematical Sciences, Faculty of Science, Universiti
Teknologi Malaysia, Malaysia)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Vinyas, Mahesh ([email protected], Department of
Mechanical Engineering, National Institute of Technology Karnataka,
India) Piyush J Sagar (Department of Mechanical Engineering,
National Institute of Technology Karnataka, India) S.C. Kattimani
(Department of Mechanical Engineering, National Institute of
Technology Karnataka, India)
Vinyas, Mahesh ([email protected], Department of
Mechanical Engineering, National Institute of Technology Karnataka,
India) Piyush J Sagar (Department of Mechanical Engineering,
National Institute of Technology Karnataka, India) S.C. Kattimani
(Department of Mechanical Engineering, National Institute of
Technology Karnataka, India)
Sung Joon, Kim ([email protected], Korea Aerospace Research
Institute, South Korea) Sang Wook, Park (Korea Aerospace Research
Institute, South Korea) Tae-Uk, Kim (Korea Aerospace Research
Institute, South Korea)
Mikolaj Smyczynski ([email protected], Poznan
University of Technology, Poland) Piotr Kedzia (Poznan University
of Technology, Poland)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Jan Eike Schnabel (Institute of Materials Research, Materials
Mechanics, Helmholtz-Zentrum Geesthacht, Germany) Christian
Mittelstedt ([email protected], Technical
University of Darmstadt, Institute for lightweight engineering,
Germany)
P. Raghu ([email protected], Indian Institute of Technology,
Hyderabad, India) A. Rajagopal (Indian Institute of Technology,
Hyderabad, India)
Xiaobo Zhang ([email protected], TU Delft, Netherlands) Henk
den Besten (TU Delft, Netherlands) Mirek Kaminski (TU Delft,
Netherlands)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Francesco Tornabene ([email protected], DICAM
Department, University of Bologna, Italy) Nicholas Fantuzzi (DICAM
Department, University of Bologna, Italy) Michele Bacciocchi (DICAM
Department, University of Bologna, Italy) Erasmo Viola (DICAM
Department, University of Bologna, Italy)
Nicholas Fantuzzi (DICAM Department, University of Bologna,
Italy) Francesco Tornabene ([email protected], DICAM
Department, University of Bologna, Italy) Michele Bacciocchi (DICAM
Department, University of Bologna, Italy) Erasmo Viola (DICAM
Department, University of Bologna, Italy)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Hao Yang ([email protected], Jiangsu University of Science
and technology, China; and Leiniz University Hannover, Germany)
Xiangyang Xu (Leiniz University Hannover, Germany) Wei Xu (Leiniz
University Hannover, Germany) Zarandi Mohammad (Leiniz University
Hannover, Germany) Ingo Neumann (Leiniz University Hannover,
Germany)
Vidal Philippe ([email protected], Universit Paris
Nanterre, France) Gallimard Laurent (Universit Paris Nanterre,
France) Polit Olivier (Universit Paris Nanterre, France)
Krzysztof, Magnucki (Institute of Rail Vehicles TABOR, Poznan,
Poland) Szymon, Milecki (Institute of Rail Vehicles TABOR, Poznan,
Poland) Jerzy, Lewinski (Institute of Rail Vehicles TABOR, Poznan,
Poland)Piotr, Kedzia ([email protected], Institute of
Applied Mechanics, Poznan University of Technology, Poznan,
Poland)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Barbara Tomczyk ([email protected] Department of
Structural Mechanics, Lodz University of Technology, Poland) Pawe
Szczerba (Department of Structural Mechanics, Lodz University of
Technology, Poland)
Magdalena, Grygorowicz ([email protected],
Poznan University of Technology, Poland) Piotr, Kedzia (Poznan
University of Technology, Poland) Krzysztof, Magnucki (Poznan
University of Technology, Poland)
Radoslaw J. Mania ([email protected], Lodz University of
Technology, Poland) Dominik Banat (Lodz University of Technology,
Poland) Monika Kamocka (Lodz University of Technology, Poland)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
S.W. Chung ([email protected], University of Utah, USA)
S.G. Hong (Seoul National University, Korea South)
Daniel, E.S. Rodrigues ([email protected], Institute of Science
and Innovation in Mechanical and Industrial Engineering (INEGI),
University of Porto, Portugal) Jorge, Belinha (Institute of Science
and Innovation in Mechanical and Industrial Engineering (INEGI),
University of Porto, Portugal) Aurlio, L. Arajo (Instituto Superior
Tcnico, University of Lisbon, Portugal) Antnio, J.M. Ferreira
(Institute of Science and Innovation in Mechanical and Industrial
Engineering (INEGI), University of Porto, Portugal) Lcia, M.J.S.
Dinis (Institute of Science and Innovation in Mechanical and
Industrial Engineering (INEGI), University of Porto, Portugal)
Renato, M. Natal (Institute of Science and Innovation in Mechanical
and Industrial Engineering (INEGI), University of Porto,
Portugal)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Lidan Xu (College of Aerospace and Civil Engineering Harbin
Engineering University, China) Xiaoyu Sun ([email protected],
College of Aerospace and Civil Engineering Harbin Engineering
University, China) Jingbiao Liu (College of Aerospace and Civil
Engineering Harbin Engineering University, China) Mingfang Shi
(College of Aerospace and Civil Engineering Harbin Engineering
University, China)
Elsadig, Mahdi ([email protected], Qatar University, Qatar)
Daniel Roberto Hernndez Ochoa (Universidad Antonio Nario, Colombia)
Ashkan Vaziri (Department of Mechanical and Industrial Engineering,
Northeastern University, USA)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Alicia, Porras ([email protected], Structural Integrity
Research Group, Mechanical Engineering Department, Universidad de
los Andes, Colombia) Alejandro, Maranon (Structural Integrity
Research Group, Mechanical Engineering Department, Universidad de
los Andes, Colombia) Camilo, Hernandez (Sustainable Design in
Mechanical Engineering Research Group (DSIM), Mechanical
Engineering Department, Escuela Colombiana de Ingenieria Julio
Garavito, Colombia)
Minmin Yu (Donghua University, China) Peng Liu (Donghua
University, China) Huihui Zhang ([email protected], Donghua
University, China) Huili Shao (Donghua University, China)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Till Valle ([email protected], Fraunhofer-Institut
fr Fertigungstechnik und Angewandte Materialforschung IFAM,
Germany) Marvin Kaufmann (Fraunhofer-Institut fr Fertigungstechnik
und Angewandte Materialforschung IFAM, Germany) Jana Kolbe
(Fraunhofer-Institut fr Fertigungstechnik und Angewandte
Materialforschung IFAM, Germany) Simon Fecht (Fraunhofer-Institut
fr Fertigungstechnik und Angewandte Materialforschung IFAM,
Germany)
Dujardin, Nicolas ([email protected], University of
Paris-Est, CERTES laboratory EA 3481, France) Feuillet, Vincent
(University of Paris-Est, CERTES laboratory EA 3481, France) Fois,
Magali (University of Paris-Est, CERTES laboratory EA 3481, France)
Polane, Christophe (University of Caen-Normandie, CIMAP UMR 6252,
France) Ibos, Laurent (University of Paris-Est, CERTES laboratory
EA 3481, France)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Cuynet, Amlie ([email protected], Laboratoire SYMME -
Universit Savoie Mont Blanc, France) Toussaint, Franck (Laboratoire
SYMME - Universit Savoie Mont Blanc, France) Roux, Emile
(Laboratoire SYMME - Universit Savoie Mont Blanc, France) Lagache,
Manuel (Laboratoire SYMME - Universit Savoie Mont Blanc, France)
Scida, Daniel (LISM - Universit de Reims Champagne-Ardenne, France)
Ayad, Rezak (LISM - Universit de Reims Champagne-Ardenne,
France)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Dayong Hu (School of Transportation Science and Engineering,
Beihang University, China; Airworthiness Technologies Research
Center, Beihang University, China; Advanced Vehicle Research
Center, Beihang University, China) Bin Song ([email protected],
School of Transportation Science and Engineering, Beihang
University, China; Airworthiness Technologies Research Center,
Beihang University, China; Advanced Vehicle Research Center,
Beihang University, China)
Jyh-Horng, Wu ([email protected], National Chung Hsing
University, Taiwan) Teng-Chun, Yang (National Chung Hsing
University, Taiwan) Yi-Chi, Chien (National Chung Hsing University,
Taiwan)
Teng-Chun Yang (Department of Forestry, National Chung Hsing
University, Taiwan) Yi-Chi Chien (Department of Forestry, National
Chung Hsing University, Taiwan) Jyh-Horng Wu ([email protected],
Department of Forestry, National Chung Hsing University,
Taiwan)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Lautenschlger, Miriam I. ([email protected],
Fraunhofer Institute for Chemical Technology ICT, Germany) Mayer,
Lukas (Karlsruhe Institute of Technology KIT, Germany) Gebauer,
Julian (Fraunhofer Institute for Chemical Technology ICT, Germany)
Weidenmann, Kay A. (Fraunhofer Institute for Chemical Technology
ICT, Karlsruhe Institute of Technology KIT, Germany) Henning, Frank
(Fraunhofer Institute for Chemical Technology ICT, Germany) Elsner,
Peter (Fraunhofer Institute for Chemical Technology ICT, Karlsruhe
Institute of Technology KIT, Germany)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
S.R. Atashipour ([email protected], Department of
Civil and Environmental Engineering, Division of Structural
Engineering, Chalmers University of Technology, Sweden) M.
Al-Emrani (Department of Civil and Environmental Engineering,
Division of Structural Engineering, Chalmers University of
Technology, Sweden) K. Frjd (Department of Civil and Environmental
Engineering, Division of Structural Engineering, Chalmers
University of Technology, Sweden) A. Hellstrm (Department of Civil
and Environmental Engineering, Division of Structural Engineering,
Chalmers University of Technology, Sweden)
Atiqah Afzaluddin (Universiti Putra Malaysia, Malaysia) Mohammad
Jawaid ([email protected], Universiti Putra Malaysia, Malaysia)
Salit M. Sapuan (Universiti Putra Malaysia, Malaysia) M.R. Ishak
(Universiti Putra Malaysia, Malaysia) O. Y. Alothman (King Saud
University, Saudi Arabia)
Mariusz, Urbaniak ([email protected], Lodz University
of Technology, Poland) Adrian, Gliszczy ski (Lodz University of
Technology, Poland)
ukasz, Borkowski (Lodz University of Technology, Poland)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Dujardin, Nicolas ([email protected], University of
Paris-Est, CERTES laboratory EA 3481, France) Fois, Magali
(University of Paris-Est, CERTES laboratory EA 3481, France)
Grimau, Mario (Universidad Simaon Bolivar, Material Science
Departement, Venezuela) Polane, Christophe (University of
Caen-Normandie, CIMAP UMR 6252, France)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Carlos, Rivera-Gmez (Universidad de Sevilla, Spain) Carmen,
Galn-Marn ([email protected], Universidad de Sevilla, Spain)
Nawawi Chouw ([email protected], University of Auckland,
New Zealand)
Hiro, Tanaka ([email protected], Osaka University,
Japan) Kaito, Suga (Osaka University, Japan) Naoki, Iwata (Osaka
Univeristy, Japan) Dai, Okumura (Osaka University, Japan) Yoji,
Shibutani (Osaka University, Japan)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Md Fazlay, Rabbi (U Mass Dartmouth, USA) Sen, Yang (U Mass
Dartmouth, USA) Vijaya, Chalivendra (U Mass Dartmouth) Yong, Kim
([email protected], U Mass Dartmouth, USA)
Yousef Dobah ([email protected], ACCIS, University of
Bristol, UK) Man Ki Bonly To (ACCIS, University of Bristol, UK)
Ioannis Zampetakis (ACCIS, University of Bristol, UK) Fabrizio
Scarpa (ACCIS, University of Bristol, UK) Anton Shterenlikht
(Department of Mechanical Engineering, University of Bristol,
UK)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Johannes, Boblenz ([email protected], German Aerospace
Center (DLR), Germany) Christian, Hhne (German Aerospace Center
(DLR), Germany)
Ewa M., Spiesz ([email protected], Department of
Bionanoscience & Kavli Institute of Nanoscience, Delft
University of Technology, The Netherlands) Dominik T., Schmieden
(Department of Bionanoscience & Kavli Institute of Nanoscience,
Delft University of Technology, The Netherlands) Jakob, Schwiedrzik
(Laboratory for Mechanics of Materials and Nanostructures, Empa
Swiss Federal Laboratories for Materials Science and Technology,
Switzerland) Antonio M., Grande (Faculty of Aerospace Engineering,
Delft University of Technology, The Netherlands) Santiago J.,
Garcia (Faculty of Aerospace Engineering, Delft University of
Technology, The Netherlands) Johann, Michler (Laboratory for
Mechanics of Materials and Nanostructures, Empa Swiss Federal
Laboratories for Materials Science and Technology, Switzerland)
Anne S., Meyer (Department of Bionanoscience & Kavli Institute
of Nanoscience, Delft University of Technology, The Netherlands)
Marie-Eve, Aubin-Tam (Department of Bionanoscience & Kavli
Institute of Nanoscience, Delft University of Technology, The
Netherlands)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Bin, Zhang (School of Materials Science and Engineering,
Northeastern University, China) Yu-Jia, Yang (School of Materials
Science and Engineering, Northeastern University, China) Hai-Feng,
Tan (School of Materials Science and Engineering, Northeastern
University, China) Xue-Mei, Luo (Institute of Metal Research,
Chinese Academy of Sciences) Guang-Ping, Zhang ([email protected],
Institute of Metal Research, Chinese Academy of Sciences,
China)
Marcela Mihai ([email protected], Petru Poni Institute of
Macromolecular Chemistry, Romania) Ana-Lavinia Vasiliu (Petru Poni
Institute of Macromolecular Chemistry, Romania) Florica Doroftei
(Petru Poni Institute of Macromolecular Chemistry, Romania)
Stefania Racovita (Petru Poni Institute of Macromolecular
Chemistry, Romania)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Djidjelli, Hocine ([email protected], LMPA, University of
Bejaia, Algeria) Boukerrou, Amar (LMPA, University of Bejaia,
Algeria) Chenni Abdenour (LMPA, University of Bejaia, Algeria) J.
J. Martinez Vega (Laplace, UPS, Toulouse) Yves Grohens (LIMB,
University of Lorient, France) Saulnier Benjamain (LIMB, University
of Lorient, France)
Young June Yoon ([email protected], College of
Engineering, Center for Integrated General Education, Hanyang
University, South Korea)
Xianfeng, Yang (Institute of Solid Mechanics, Beihang
University, China) Jingxuan, Ma (Institute of Solid Mechanics,
Beihang University, China) Jialing, Yang ([email protected],
Institute of Solid Mechanics, Beihang University, China) Yuxing,
Sun (Institute of Solid Mechanics, Beihang University, China)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Ali Mehboob (School of Mechanical Engineering, Chung-Ang
University, South Korea) Seung-Hwan Chang ([email protected], School
of Mechanical Engineering, Chung-Ang University, South Korea)
Ali Mehboob (School of Mechanical Engineering, Chung-Ang
University, Korea South) Seung-Hwan Chang ([email protected], School
of Mechanical Engineering, Chung-Ang University, Korea South)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Silvestre, Pinho ([email protected], Imperial
College London, Dept. Aeronautics, UK) Gianmaria, Bullegas
(Imperial College London, Dept. Aeronautics, UK) Federico, Narducci
(Imperial College London, Dept. Aeronautics, UK) Soraia, Pimenta
(Imperial College London, Dept. Mechanical Engineering, UK)
Muhsin Aljuboury ([email protected], Plymouth
University, UK) Md Jahir Rizvi (Plymouth University, UK) Stephen
Grove (Plymouth University, UK) Richard Cullen (Plymouth
University, UK)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Yu, Zhang ([email protected], Institute for Offshore
Engineering, China University of Petroleum, China) Ziyun, Cheng
(Institute for Offshore Engineering, China University of
Petroleum-Beijing, China) Xueqi, Yang (Department of Aeronautics
and Astronautics, Fudan University, China) Qilin, Shi (Institute
for Offshore Engineering, China University of Petroleum-Beijing,
China) Menglan, Duan (Institute for Offshore Engineering, China
University of Petroleum-Beijing, China)
Rasha El-Ghazawy Ibrahim ([email protected], Polymer
Nanocomposites Center, Egyptian Petroleum Research Institute,
Egypt) Hamdy M. Naguib (Polymer Nanocomposites Center, Egyptian
Petroleum Research Institute, Egypt) Usama F. Kandil (Polymer
Nanocomposites Center, Egyptian Petroleum Research Institute,
Egypt) Nevine O. Shaker (Polymer Nanocomposites Center, Egyptian
Petroleum Research Institute, Egypt) Mahmoud Reda Taha (Department
of Civil Engineering, University of New Mexico, USA)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Mahmoud, Helal (Production and Mechanical Design Dept., Faculty
of Engineering, Mansoura University, Egypt & Department of
Mechanical Engineering, Faculty of Engineering, Taif University,
Saudi Arabia) Noha, Fouda (Production and Mechanical Design Dept.,
Faculty of Engineering, Mansoura University, Egypt) Elsayed,
Fathallah ([email protected], Department of Civil
Engineering, Military Technical College, Egypt) Sherif M.M.
Abdekhalek (Production and Mechanical Design Dept, Military
Technical College, Egypt)
Elsayed, Fathallah ([email protected], Department of
Civil Engineering, Military Technical College, Egypt) Noha, Fouda
(Production and Mechanical Design Dept., Faculty of Engineering,
Mansoura University, Egypt) Mahmoud, Helal (Production and
Mechanical Design Dept., Faculty of Engineering, Mansoura
University, Egypt; Department of Mechanical Engineering, Faculty of
Engineering, Taif University, Saudi Arabia) Ashraf, Osman
(Department of Civil Engineering, Military Technical College,
Egypt)
Akbar Esmaeili ([email protected], Department of Chemical
Engineering, North Tehran Branch, Islamic Azad University, Iran)
Sahar Kakavand (Department of Chemical Engineering, North Tehran
Branch, Islamic Azad University, Iran)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
M. Chwa (Institute of Machine Design, Cracow University of
Technology, Poland) A. Muc (Institute of Machine Design, Cracow
University of Technology, Poland) A. Stawiarski (Institute of
Machine Design, Cracow University of Technology, Poland) P.
Romanowicz (Institute of Machine Design, Cracow University of
Technology, Poland) M. Barski (Institute of Machine Design, Cracow
University of Technology, Poland)
M. Chwal (Institute of Machine Design, Cracow University of
Technology, Poland) M. Barski (Institute of Machine Design, Cracow
University of Technology, Poland) A. Muc (Institute of Machine
Design, Cracow University of Technology, Poland) A. Stawiarski
(Institute of Machine Design, Cracow University of Technology,
Poland)
A. Muc (Institute of Machine Design, Cracow University of
Technology, Poland) B. Szybi ski (Institute of Machine Design,
Cracow University of Technology, Poland) P. K dziora (Institute of
Machine Design, Cracow University of Technology, Poland) P.
Romanowicz (Institute of Machine Design, Cracow University of
Technology, Poland)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
P. Romanowicz (Institute of Machine Design, Cracow University of
Technology, Poland) M. Barski (Institute of Machine Design, Cracow
University of Technology, Poland) B. Szybi ski (Institute of
Machine Design, Cracow University of Technology, Poland) A. Muc
(Institute of Machine Design, Cracow University of Technology,
Poland) P. K dziora (Institute of Machine Design, Cracow University
of Technology, Poland)
A. Muc (Cracow University of Technology, Institute of Machine
Design, Poland) A. Stawiarski (Cracow University of Technology,
Institute of Machine Design, Poland) M. Chwa (Cracow University of
Technology, Institute of Machine Design, Poland) P. K dziora
(Cracow University of Technology, Institute of Machine Design,
Poland)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
A. Stawiarski ([email protected], Institute of
Machine Design, Cracow University of Technology, Poland) A. Muc
(Institute of Machine Design, Cracow University of Technology,
Poland) M. Chwa (Institute of Machine Design, Cracow University of
Technology, Poland) M. Barski (Institute of Machine Design, Cracow
University of Technology, Poland) P. Romanowicz (Institute of
Machine Design, Cracow University of Technology, Poland)
A. Muc (Cracow University of Technology, Institute of Machine
Design, Poland) M. Siko (Cracow University of Technology, Institute
of Machine Design, Poland) P. K dziora (Cracow University of
Technology, Institute of Machine Design, Poland)
Liu Ping Zhang Kaifu ([email protected]) Hu Wenqiang
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Yousef Payandeh ([email protected], Department of Materials
Science and Engineering, Faculty of Engineering, Arak University,
Iran)
Meriem Ghrib (PIMM Laboratory ENSAM, CNAM, CNRS, France) Mikhail
Guskov ([email protected], PIMM Laboratory ENSAM, CNAM, CNRS,
France) Guillaume Vermot Des Roches (SDTools, France) Etienne
Balmes (SDTools, France) Marc Rebillat (PIMM Laboratory ENSAM,
CNAM, CNRS, France) Nazih Mechbal (PIMM Laboratory ENSAM, CNAM,
CNRS, France)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Jingbiao Liu ([email protected], College of Aerospace and
Civil Engineering, Harbin Engineering University, China) Zhenqing
Wang (College of Aerospace and Civil Engineering, Harbin
Engineering University, China) Xiaoyu Sun (College of Aerospace and
Civil Engineering, Harbin Engineering University, China) Lidan Xu
(College of Aerospace and Civil Engineering, Harbin Engineering
University, China)
Koffi Snanou Ledi ([email protected],
Universit de Lorraine, LEM3, UMR CNRS 7239, France; GI2M CNRS
FR3574, France) Mohamed Hamdaoui (Universit de Lorraine, LEM3, UMR
CNRS 7239, France; GI2M CNRS FR3574, France) Guillaume Robin
(Universit de Lorraine, LEM3, UMR CNRS 7239, France; GI2M CNRS
FR3574, France) El Mostafa Daya (Universit de Lorraine, LEM3, UMR
CNRS 7239, France; GI2M CNRS FR3574, France)
Qiang, Gao ([email protected], Fudan University, China)
Menglan, Duan (China University of Petroleum, China) Xueqi, Yang
(Fudan University, China) Wenbin, Shi (Fudan University, China)
Dongwei, Zhao (China University of Petroleum, China) Chen, An
(China University of Petroleum, China) Zhongli, Li (Heibei Jingxian
Zebang Rubber Technology, Co., Ltd, China)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Xueqi, Yang ([email protected], Department of Aeronautics
and Astronautics, Fudan University, China) Menglan, Duan
(Department of Aeronautics and Astronautics, Fudan University,
China & Institute for Offshore Engineering, China University of
Petroleum, China) Qiang, Gao (Department of Aeronautics and
Astronautics, Fudan University, China) Yu, Zhang (Institute for
Offshore Engineering, China University of Petroleum, China)
Zhongli, Li (Hebei Jingxian Zebang Rubber Technology, Co., Ltd,
Hengshui, China)
Jeong-Hyeon, Kim ([email protected], Pusan National
University, South Korea) Jeong-Dae, Kim (Pusan National University,
South Korea) Jae-Hyeok, Ahn (Pusan National University, South
Korea) Seul-Kee Kim (Pusan National University, South Korea)
Sungkyun, Park (Pusan National University, South Korea) Kang Hyun,
Park (Pusan National University, South Korea) Jae-Myung, Lee (Pusan
National University, South Korea)
Jinsup, Kim ([email protected], Gyeongsang National
University, South Korea) Minho, Kwon (Gyeongsang National
University, South Korea)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Mohamed, Harhash ([email protected], Institute of
Metallurgy (IMET), Metal Forming and Processing, Clausthal
University of Technology (TUC), Germany) Viktoria, Harms (Institute
of Metallurgy (IMET), Metal Forming and Processing, Clausthal
University of Technology (TUC), Germany) Adele, Carrad (Institut de
Physique et Chimie des Materiaux de Strasbourg, IPCMS, UMR 7504
ULP-CNRS, France) Heinz, Palkowski (Institute of Metallurgy (IMET),
Metal Forming and Processing, Clausthal University of Technology
(TUC), Germany)
Vincent, Pieuchot ([email protected], Univ. Bourgogne
Franche-Comt, France) Jrme, Rousseau (DRIVE EA1859, Univ. Bourgogne
Franche-Comt, France) Shahram, Aivazzadeh (DRIVE EA1859, Univ.
Bourgogne Franche-Comt, France)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Nanda, Wirawan ([email protected], National Institute of
Aeronautics and Space, Indonesia) Mahesa, Akbar (The University of
Sheffield, United Kingdom)
Fabiana Piano (UFRN, Brazil) Raimundo Carlos Silveri Freire
Junior (UFRN, Brazil) Avelino Manuel da Silva Dias
([email protected], UFRN, Brazil)
Fabio Gabrieli ([email protected], University of Padova,
Italy) Antonio Pol (University of Padova, Italy) Klaus Thoeni
(University of Newcastle, Australia)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Zheng, Wang ([email protected], Chair of Automotive
Lightweight Design, Paderborn University, Germany) Thomas, Troester
(Chair of Automotive Lightweight Design, Paderborn University,
Germany)
Maxime Sagnard ([email protected]) Laurent Berthe Romain
Ecault Fabienne Touchard Michel Boustie Kai Brune
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Matthew, Bowers (WPI Popovic Labs, USA) Chinmay, Harmalkar (WPI
Popovic Labs, USA) Saivimal, Sridar (WPI Alumni, USA) Corey,
Majeika (WPI Alumni, USA) Christian, Kaan (WPI Alumni, USA)
Germano, Iannacchione (WPI Physics, USA) Marko, Popovic
([email protected], WPI Popovic Labs, USA)
Patthamaporn Timakul ([email protected]) Weerada Rattanaprasit
Duangduen Atong Pavadee Aungkavattana
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Bin Yang ([email protected], School of Mechanical and Power
Engineering, East China University of Science and Technology,
China) Fu-Zhen Xuan (School of Mechanical and Power Engineering,
East China University of Science and Technology, China)
F. Dahmene ([email protected], Institut de Soudure,
Plateforme RDI CND, France) S. Yaacoubi (Institut de Soudure,
Plateforme RDI CND, France) S. Bittendiebel (Institut de Soudure,
Plateforme RDI CND, France) A. Maldachowska (Wroclaw University of
Science and Technology, Poland) M. Barcikowski (Wroclaw University
of Science and Technology, Poland) M. Panek (Wroclaw University of
Science and Technology, Poland) N. Alexandre (CEA, DAM, Le Ripault,
France) F. Nony (CEA, DAM, Le Ripault, France) O. Bardoux (Air
Liquide Research and Development, France) P. Blanc-Vannet (Air
Liquide Research and Development, France) P. Breuer (Hexagon
Composites, Raufoss, Norway) P-S. Heggem (Hexagon Composites,
Raufoss, Norway)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
F. Dahmene ([email protected], Institut de Soudure,
Plateforme RDI CND, France) S. Yaacoubi (Institut de Soudure,
Plateforme RDI CND, France) S. Bittendiebel (Institut de Soudure,
Plateforme RDI CND, France) A. Maldachowska (Wroclaw University of
Science and Technology, Poland) M. Barcikowski (Wroclaw University
of Science and Technology, Poland) R. Rybczynski (Wroclaw
University of Science and Technology, Poland) N. Alexandre (CEA,
DAM, Le Ripault, France) F. Nony (CEA, DAM, Le Ripault, France) O.
Bardoux (Air Liquide Research and Development, France) P.
Blanc-Vannet (Air Liquide Research and Development, France) K. Lasn
(Norwegian University of Science and Technology, Trondheim, Norway)
A. Echtermeyer (Norwegian University of Science and Technology,
Trondheim, Norway) P. Breuer (Hexagon Composites, Raufoss, Norway)
P-S. Heggem (Hexagon Composites, Raufoss, Norway)
Syed Idros Bin Syed Abdullah ([email protected],
Department of Aeronautics, Imperial College London, UK) Lorenzo
Iannucci (Department of Aeronautics, Imperial College London, UK)
Emile Smith Greenhalgh (Department of Aeronautics, Imperial College
London, UK)
Pere Badall (Acondicionamiento Tarrasense Asociacin LEITAT,
Spain) Mart Verdaguer (Acondicionamiento Tarrasense Asociacin
LEITAT, Spain) Adrin Ortega ([email protected], Acondicionamiento
Tarrasense Asociacin LEITAT, Spain) Zaida Ortega (Universidad de
Las Palmas de Gran Canaria, Spain) Mario D. Monzn (Universidad de
Las Palmas de Gran Canaria, Spain)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
tepn, Hysek ([email protected], Department of Wood Processing,
Czech University of Life Sciences Prague, Czech Republic) Ondrej,
Schonfelder (Department of Wood Processing, Czech University of
Life Sciences Prague, Czech Republic) Adam, Sikora (Department of
Wood Processing, Czech University of Life Sciences Prague, Czech
Republic)
Huihui Zhang ([email protected], Donghua University, China)
Yuzeng Li (Donghua University, China) Gesheng Yang (Donghua
University, China) Qiao Li (Donghua University, China) Minmin Yu
(Donghua University, China) Huili Shao (Donghua University,
China)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Shamsher Bahadur, Singh ([email protected], Civil
Engineering Department, Birla Institute of Technology and Science
Pilani, India) Sudhir, Vummadisetti (Civil Engineering Department,
Birla Institute of Technology and Science Pilani, India) Himanshu,
Chawla (Civil Engineering Department, Birla Institute of Technology
and Science Pilani, India)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Farid Taheri ([email protected], Mechanical Engineering,
Dalhousie University, Canada)
Brandon Horton (CRASH Lab, The State University of New York,
USA) Yangkun Song (CRASH Lab The State University of New York, USA)
Dawn Jegley (NASA Langley Research Center) Javid Bayandor
([email protected], CRASH Lab The State University of New York
at Buffalo, USA)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
M. L. Ribeiro ([email protected], EESC-USP, University of So
Paulo, So Carlos School of Engineering, Department of Aeronautical
Engineering, Brazil) G.F.O. Ferreira (EESC-USP, University of So
Paulo, So Carlos School of Engineering, Department of Aeronautical
Engineering, Brazil) R. de Medeiros (UDESC, Santa Catarina State
University, Department of Mechanical Engineering, Brazil) A.J.M.
Ferreira (University of Porto, Faculty of Engineering, Portugal)
Volnei Tita (EESC-USP, University of So Paulo, So Carlos School of
Engineering, Department of Aeronautical Engineering, Brazil)
Lutfiye Altay (Ege University, Mechanical Engineering
Department, Turkey) Baris Oguz Gurses (Ege University, Mechanical
Engineering Department, Turkey) Aysun Guven ([email protected],
Ankara Y ld r m Beyaz t University, Mechanical Engineering
Department Keiren, Turkey) Mehmet Sarikanat (Ege University,
Mechanical Engineering Department, Turkey)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Kristof, Vanclooster ([email protected], Siemens
Industry Software NV, Belgium) Fabio, Santos (Siemens Industry
Software NV, Belgium) Andrei, Sirbu (Siemens Industry Software NV,
Belgium) Bert, Van Genechten (Siemens Industry Software NV,
Belgium) Laszlo, Farkas (Siemens Industry Software NV, Belgium)
Jason, Denny ([email protected], University of Kwa-Zulu
Natal, South Africa) Kirsty Veale (University of Kwa-Zulu Natal,
South Africa) Sarp Adali (University of Kwa-Zulu Natal, South
Africa) Fiona Leverone (University of Kwa-Zulu Natal, South
Africa)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Lindner, Marco ([email protected], Technische
Universitt Chemnitz, Germany) Vanselow, Konrad (Technische
Universitt Chemnitz, Germany) Gelbrich, Sandra (Research Group:
Lightweight Constructions in Civil Engineering; Technische
Universitt Chemnitz, Germany) Kroll, Lothar (Head of Department of
Lightweight Structures and Polymer Technology, Director of IST,
Director of Affiliated Institute CETEX, Dean for Research,
International Relations and Gender of the Faculty Mechanical
Engineering Technische Universitt Chemnitz, Germany)
Yuefa Zhou ([email protected], College of Aerospace and Civil
Engineering, Harbin Engineering University China) Qunkai Chen
(College of Aerospace and Civil Engineering, Harbin Engineering
University China) Xiaoxu Guo (College of Aerospace and Civil
Engineering, Harbin Engineering University China)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Abakar Malloum Nougra ([email protected]) El
Mahi Abderrahim Moustapha Idriss
Qingxun Meng ([email protected], Department of Mechanical
Engineering, Northwestern Polytechnical University, China) Kaifu
Zhang (Department of Mechanical Engineering, Northwestern
Polytechnical University, China) Hui Cheng (Department of
Mechanical Engineering, Northwestern Polytechnical University,
China) Guoyi Hou (Department of Mechanical Engineering,
Northwestern Polytechnical University, China)
Hongjie Sun ([email protected], Aerospace Research
Institute of Materials & Processing Technology, China) Jianbao
Zhang (Aerospace Research Institute of Materials & Processing
Technology, China) Yu Zhou (Aerospace Research Institute of
Materials & Processing Technology, China) Kai Yi (Aerospace
Research Institute of Materials & Processing Technology,
China)
Qimao Liu ([email protected] ABB Corporate Research Center,
Sweden)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Yucheng, Zhong ([email protected], School of Science, Wuhan
University of Technology, China) Ravindrababu, Suraj (Temasek
Laboratories @ NTU, Nanyang Technological University, Singapore)
Dongfeng, Cao (State Key Laboratory of Materials Synthesis and
Processing, Wuhan University of Technology, China) Shuxin, Li
(State Key Laboratory of Materials Synthesis and Processing, Wuhan
University of Technology, China) Elvin Ser Ming, Chia (DSO National
Laboratories, Singapore) Sunil Chandrakant, Joshi (School of
Mechanical and Aerospace Engineering, Nanyang Technological
University, Singapore) Zhong, Chen (School of Materials Science and
Engineering, Nanyang Technological University, Singapore)
Vahideh Shahedifar (Materials Engineering University of Tabriz,
Iran) Mahdi Ghassemi Kakroudi ([email protected], Materials
Engineering University of Tabriz, Iran) Nasser Pourmohammadie Vafa
(Materials Engineering University of Tabriz, Iran)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Sara, Garzon-Hernandez (Carlos III University, Madrid, Spain)
Daniel, Garca-Gonzlez (University of Oxford, Oxford, UK) Alexis,
Rusinek (Lorraine Universit, Metz, France) Rodrigue,
Matadi-Boumbimba (Lorraine Universit, Metz, France) Angel, Arias
([email protected], Carlos III University, Madrid, Spain)
Ibrahim Kr ad Trko lu (Amasya University, Technology Faculty,
Automotive Eng. Dept., Turkey) Ycel Can ([email protected],
R&D Center, Renault Automotive Company, Turkey) Murat Yazici
(Uludag University, Engineering Faculty, Automotive Engineering
Department, Turkey)
Ycel Can ([email protected], R&D Center, Renault
Automotive Company, Turkey) Harun Gl (Uludag University,
Engineering Faculty, Automotive Engineering Department, Turkey)
Ibrahim Kr ad Trko lu (Amasya University, Technology Faculty,
Automotive Eng. Dept., Turkey) Murat Yazici (Uludag University,
Engineering Faculty, Automotive Engineering Department, Turkey)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Susanna, Laurenzi ([email protected], Department of
Astronautic, Electrical and Energy Engineering, Sapienza University
of Rome, Italy) Fabrizio, Poscente (Thales Alenia Space Italia
S.p.A, Italy) Mario, Lanuti (Thales Alenia Space Italia S.p.A,
Italy)
Jaroslaw Bienias ([email protected], Department of Materials
Engineering, Faculty of Mechanical Engineering, Lublin University
of Technology, Poland) Monika Ostapiuk (Department of Materials
Engineering, Faculty of Mechanical Engineering, Lublin University
of Technology, Poland) Barbara Surowska (Department of Materials
Engineering, Faculty of Mechanical Engineering, Lublin University
of Technology, Poland)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Vasiliki Loukodimou ([email protected], Cranfield
University, UK) Mihalis C. Kazilas (TWI Ltd, UK) Alexandros A.
Skordos (Cranfield University, UK)
Liu Ping Zhang Kaifu ([email protected]) Hu Wenqiang
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Patryk, Jakubczak ([email protected], Department of
Materials Engineering, Faculty of Mechanical Engineering, Lublin
University of Technology, Poland) Jaros aw, Bienia (Department of
Materials Engineering, Faculty of Mechanical Engineering, Lublin
University of Technology, Poland) Krzysztof, Majerski (Department
of Materials Engineering, Faculty of Mechanical Engineering, Lublin
University of Technology, Poland) Barbara, Surowska (Department of
Materials Engineering, Faculty of Mechanical Engineering, Lublin
University of Technology, Poland)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Rongqiao, Wang (School of Energy and Power Engineering, Beihang
University, China) Long, Zhang (School of Energy and Power
Engineering, Beihang University, China) Dianyin, Hu
([email protected], School of Energy and Power Engineering, Beihang
University, China) Chongdu, Cho (Department of Mechanical
Engineering, Inha University, South Korea) Bo, Li (Department of
Mechanical and Aerospace Engineering, Case Western Reserve
University, USA)
Susmita Naskar ([email protected]) Srinivas Sriramula
Susmita Naskar ([email protected]) Tanmoy Mukhopadhyay Srinivas
Sriramula
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Hyung-Joon Bang ([email protected], Korea Institute of Energy
Research, South Korea) Soo-Hyun Kim (Korea Institute of Energy
Research, South Korea)
Hongjie Sun ([email protected], Aerospace Research
Institute of Materials & Processing Technology, China) Jianbao
Xhang (Aerospace Research Institute of Materials & Processing
Technology, China) Yu Zhou (Aerospace Research Institute of
Materials & Processing Technology, China) Kai Yi (Aerospace
Research Institute of Materials & Processing Technology,
China)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Carolin Zinn ([email protected], Paderborn University, Chair of
Materials Science (LWK), Germany) Zheng Wang (Paderborn University,
Chair of Automotive Lightweight Design (LiA), Germany) Mirko
Schaper (Paderborn University, Chair of Materials Science (LWK),
Germany) Thomas Troester (Paderborn University, Chair of Automotive
Lightweight Design (LiA), Germany)
David Moncayo ([email protected], Daimler AG, Germany)
Daniel Coutellier (University of Valenciennes, France) Pedro Ponce
Camanho (University of Porto, Portugal) Christian Glggler (DAIMLER
AG, Germany)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Marek Barski ([email protected], Institute of Machine Design,
Faculty of Mechanical Engineering, Cracow University of Technology,
Poland) Mateusz Wygoda (Institute of Machine Design, Faculty of
Mechanical Engineering, Cracow University of Technology, Poland)
Przemys aw Daniel Pastuszak (Institute of Machine Design, Faculty
of Mechanical Engineering, Cracow University of Technology,
Poland)
Wolff, Johannes ([email protected]) Skibbe, Jan
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Guangping, Zou (Harbin Engineering University, China) Yuyang,
Wang ([email protected], Harbin Engineering University, China)
Zhongliang, Chang (Harbin Engineering University, China)
Jianhua Zhang ([email protected], Harbin Engineering University,
China) Chengyu Guan (Harbin Engineering University, China) Lili
Tong (Harbin Engineering University, China)
Jianhua Zhang ([email protected], Harbin Engineering University,
China) Chengyu Guan (Harbin Engineering University, China) Won Hee
Kang (Western Sydney University, Australia) Lili Tong (Harbin
Engineering University, China)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Fatih, Yildiz (Dept. of Mechanical Eng., Erzurum Technical
University, Turkey) Salih, Akpinar ([email protected],
Dept. of Mechanical Eng., Erzurum Technical University, Turkey)
Adnan, zel (Dept. of Mechanical Eng., Erzincan University,
Turkey)
Halim, Kovaci (Ataturk University, Faculty of Engineering,
Department of Mechanical Engineering, Turkey) A. Fatih, Yetim
([email protected], Erzurum Technical University, Faculty
of Engineering and Architecture, Department of Mechanical
Engineering, Turkey) zlem, Baran (Erzincan University, Faculty of
Engineering, Department of Mechanical Engineering, Turkey) Ayhan,
elik (Ataturk University, Faculty of Engineering, Department of
Mechanical Engineering, Turkey)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Ahmed M. Ismail (International Institute for Urban Systems
Engineering, Southeast University, China) Mohamed F.M. Fahmy
(International Institute for Urban Systems Engineering, Southeast
University, China; Civil Engineering Dept., Faculty of Engineering,
Assiut University, Egypt) Zhishen Wu ([email protected],
International Institute for Urban Systems Engineering, Southeast
University, China)
Heow Pueh, Lee ([email protected], National University of
Singapore, Singapore) Tran Le, Ngoc (Singapore Institute of
Manufacturing Technology, Singapore) Wern Tze, Teo (Singapore
Institute of Manufacturing Technology, Singapore) Umeyr, Kureemun
(National University of Singapore, Singapore)
Salih Akpinar ([email protected], Erzurum Technical
University, Turkey) Adnan Ozel (Erzincan University, Turkey)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Salih Akpinar ([email protected], Dept. of Mechanical
Eng., Erzurum Technical University, Turkey) Adnan Ozel (Dept. of
Mechanical Eng., Erzincan University, Turkey)
Hochard, Christian ([email protected], Laboratoire de
Mcanique et d'Acoustique, France) Lahellec, Nol (Laboratoire de
Mcanique et d'Acoustique, France) Montagnier, Olivier (Laboratoire
de Mcanique et d'Acoustique, France)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Pham Chi Vinh ([email protected], Hanoi University of Science,
Faculty of Mathematics, Mechanics and Informatics, Vietnam) Nguyen
Thi Kieu (Hanoi Architectural University, Faculty of Civil
Engineering, Vietnam)
Kvin Bonnay ([email protected], IRT Jules Verne
& LEM3 UMR CNRS 7239, France) Clment Nony-Davadie (IRT Jules
Verne & Arts et Metiers Paristech, LEM3 UMR CNRS 7239, France)
Yves Chemisky (Arts et Metiers Paristech, LEM3 UMR CNRS 7239,
France) Georges Chatzigeorgiou (Arts et Metiers Paristech, LEM3 UMR
CNRS 7239, France) Fodil Meraghni (Arts et Metiers Paristech, LEM3
UMR CNRS 7239, France)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
George, Chatzigeorgiou ([email protected], LEM3,
UMR 7239, Arts et Mtiers ParisTech, France) Dimitrios, Anagnostou
(LEM3, UMR 7239, Arts et Mtiers ParisTech, France) Yves, Chemisky
(LEM3, UMR 7239, Arts et Mtiers ParisTech, France) Fodil, Meraghni
(LEM3, UMR 7239, Arts et Mtiers ParisTech, France)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Serena, Ferraro ([email protected], California Institute of
Technology, United States) Sergio, Pellegrino (California Institute
of Technology, United States)
Aurelio, Araujo ([email protected], IDMEC,
Instituto Superior Tecnico, Universidade de Lisboa, Portugal)
Filipa, Moleiro (IDMEC, Instituto Superior Tecnico, Universidade de
Lisboa, Portugal) Cristovao, Mota Soares (IDMEC, Instituto Superior
Tecnico, Universidade de Lisboa, Portugal) Jorge, Belinha
(Department of Mechanical Engineering, Faculty of Engineering,
University of Porto, Portugal) Antonio, Ferreira (Department of
Mechanical Engineering, Faculty of Engineering, University of
Porto, Portugal)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
ZhenZhou Wang, ([email protected], University of Southampton,
UK) Adam Sobey, (University of Southampton, UK)
Aleksandr Fomin ([email protected], Yuri Gagarin State
Technical University of Saratov, Russia) Marina Fomina (Yuri
Gagarin State Technical University of Saratov, Russia) Vladimir
Koshuro (Yuri Gagarin State Technical University of Saratov,
Russia) Igor Rodionov (Yuri Gagarin State Technical University of
Saratov, Russia)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Vladimir Koshuro (Yuri Gagarin State Technical University of
Saratov, Russia) Marina Fomina (Yuri Gagarin State Technical
University of Saratov, Russia) Aleksey Voyko (Yuri Gagarin State
Technical University of Saratov, Russia) Igor Rodionov (Yuri
Gagarin State Technical University of Saratov, Russia) Andrey
Zakharevich (Saratov State University named after N.G.
Chernyshevsky, Russia) Aleksandr Skaptsov (Saratov State University
named after N.G. Chernyshevsky, Russia) Aleksandr Fomin
([email protected], Yuri Gagarin State Technical University of
Saratov, Russia)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Carlos Javier (University of Rhode Island, United States) Helio
Matos (University of Rhode Island, United States) James LeBlanc
(Naval Undersea Warfare Center, Newport Rhode Island, United
States) Arun Shukla ([email protected], University of Rhode Island,
United States)
Magdalena Susniak ([email protected], AGH University of Science
and Technology, Poland) Konrad Lasek (AGH University of Science and
Technology, Poland) Maja Nowak (AGH University of Science and
Technology, Poland) Pawe Pa ka (AGH University of Science and
Technology, Poland) Bartosz Su kowski (AGH University of Science
and Technology, Poland)
Soraia Pimenta ([email protected], Imperial College
London, UK) David B Anthony (Imperial College London, UK) Gianmaria
Bullegas (Imperial College London, UK) Gael Grail (Imperial College
London, UK) Milo S P Shaffer (Imperial College London, UK)
Silvestre Pinho (Imperial College London, UK) Paul Robinson
(Imperial College London, UK)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Shirsendu, Sikdar ([email protected], Institute of Fluid-Flow
Machinery, Polish Academy of Sciences, Poland) Wies aw, Ostachowicz
(Institute of Fluid-Flow Machinery, Polish Academy of Sciences,
Poland) Joy Pal (Department of Civil Engineering, Indian Institute
of Technology Bombay, India) Pawel, Kudela (Institute of Fluid-Flow
Machinery, Polish Academy of Sciences, Poland) Maciej, Radzie ski
(Institute of Fluid-Flow Machinery, Polish Academy of Sciences,
Poland)
Joanna Karwan-Baczewska ([email protected]) Aleksandra
Franczak
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Merve zkutlu (Department of Chemical Engineering, Middle East
Tehcnical University, Turkey) Cerag Dilek (Department of Chemical
Engineering, Middle East Tehcnical University, Turkey) Gknur Bayram
([email protected], Department of Chemical Engineering, Middle
East Tehcnical University, Turkey)
Giuseppina Ambrogio (DIMEG - University of Calabria, Italy)
Romina Conte (DIMEG - University of Calabria, Italy) Diego Pulice
(DIMEG - University of Calabria, Italy) Francesco Gagliardi
([email protected], DIMEG - University of Calabria,
Italy) Giorgio Simeoli (CRdC Tecnologie scarl, Italy) Pietro Russo
(Institute for Polymers, Composites and Biomaterials, Italy)
Luigino Filice (DIMEG - University of Calabria, Italy)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Thibaut Vogel ([email protected], Airbus Group
Innovations, France) Pascal Casari (Universit de Nantes, France)
Jean-Christophe Walrick (ESTACA Laval, France)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Jie Wang ([email protected], Universit de Lyon, LaMCoS,
INSA-Lyon, France) Nahiene Hamila (Universit de Lyon, LaMCoS,
INSA-Lyon, France) Philippe Boisse (Universit de Lyon, LaMCoS,
INSA-Lyon, France)
Trauth, Anna ([email protected], Karlsruhe Institute of
Technology, Institute for Applied Materials, Germany) Weidenmann,
Kay Andr (Karlsruhe Institute of Technology, Institute for Applied
Materials, Germany)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Vincenzo, Oliveri ([email protected], Bernal Institute,
School of Engineering, University of Limerick, Ireland) Alberto,
Milazzo (University of Palermo, Italy) Paul M., Weaver (Bernal
Institute, School of Engineering, University of Limerick,
Ireland)
Gennady M. Kulikov ([email protected], Tambov State Technical
University, Russia)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Ilinzeer, Sergej (Karlsruhe Institute of Technology KIT,
Germany) Rupp, Peter ([email protected], Karlsruhe Institute of
Technology KIT, Germany) Weidenmann, Kay (Karlsruhe Institute of
Technology KIT, Germany) Elsner, Peter (Karlsruhe Institute of
Technology KIT, Fraunhofer Institute for Chemical Technology ICT,
Germany)
Roberto Capozucca ([email protected], UNIVPM, Italy) Erica
Magagnini (UNIVPM, Italy)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Pawe Czapski ([email protected], Department of Strength of
Materials, Lodz University of Technology, Poland) Tomasz Kubiak
(Department of Strength of Materials, Lodz University of
Technology, Poland)
Ahmed, Amna ([email protected], Laboratoire de
Physique des Systmes Complexes, Universite Picardie Jules Verne,
France) Chaker, Yassine (Laboratoire de Synthse et Catalyse,
Universit de Tiaret, Algrie) Abbas, Ouissam (Centre de Recherche en
Agronomie de Wallonie, Belgique) Courty, Matthieu (LRCS, Universite
Picardie Jules Verne, France) Chotard, Jean-Noel (LRCS, Universite
Picardie Jules Verne, France) Wadouachi, Anne (LG2A, Universite
Picardie Jules Verne, France) Bresson, Serge (PSC, Universite
Picardie Jules Verne, France)
Chung, S.W. (University of Utah, USA) Hong, S.G. (Seoul National
University, South Korea) Ju, G.S. (Yeung Nam University, Tae Gu,
South Korea)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Marcela Mihai ([email protected], "Petru Poni" Institute of
Macromolecular Chemistry, Romania) Ana-Lavinia Vasiliu ("Petru
Poni" Institute of Macromolecular Chemistry, Romania) Florica
Doroftei (Petru Poni Institute of Macromolecular Chemistry,
Romania) Cristian Barbu-Mic ("Petru Poni" Institute of
Macromolecular Chemistry, Romania) Stefania Racovita ("Petru Poni"
Institute of Macromolecular Chemistry, Romania)
Mohamed Amine Benhenni ([email protected], Facult des
Sciences appliques, Laboratoire Technologie Industrielle, Universit
Tiaret, Algeria) Belkacem Adim (Facult des Sciences appliques,
Laboratoire de gomatique et dveloppement durable, Universit Tiaret,
Algeria) Tahar Hassaine Daouadji (Facult des Sciences appliques,
Laboratoire de gomatique et dveloppement durable, Universit Tiaret,
Algeria) Ahmed Bouzidane (Facult des Sciences appliques,
Laboratoire Technologie Industrielle, Universit Tiaret, Algeria)
Boussad Abbes (Laoratoire crespi Moulin de la housse, Universit de
Reims, France) Yu Ming Li (Laoratoire crespi Moulin de la housse,
Universit de Reims, France)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Marian, Babiak (Department of Wood Processing, Czech University
of Life Sciences Prague) Milan, Gaff (Department of Wood
Processing, Czech University of Life Sciences Prague) tepn, Hysek
(Department of Wood Processing, Czech University of Life Sciences
Prague) Adam, Sikora (Department of Wood Processing, Czech
University of Life Sciences)
Marian, Babiak (Department of Wood Processing, Czech University
of Life Sciences, Czech Republic) Milan, Gaff ([email protected],
Department of Wood Processing, Czech University of Life Sciences,
Czech Republic) tepn, Hysek (Department of Wood Processing, Czech
University of Life Sciences, Czech Republic) Adam, Sikora
(Department of Wood Processing, Czech University of Life Sciences,
Czech Republic)
Milan, Gaff ([email protected], Department of Wood Processing,
Czech University of Life Sciences, Czech Republic) Marian, Babiak
(Department of Wood Processing, Czech University of Life Sciences,
Czech Republic)
Milan, Gaff ([email protected], Department of Wood Processing,
Czech University of Life Sciences Prague, Czech Republic) Marian,
Babiak (Department of Wood Processing, Czech University of Life
Sciences Prague, Czech Republic)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Milan, Gaff (Department of Wood Processing, Czech University of
Life Sciences Prague) tepn, Hysek, Department of Wood Processing,
Czech University of Life Sciences Prague) Adam, Sikora, Department
of Wood Processing, Czech University of Life Sciences Prague
tepn, Hysek (Department of Wood Processing, Czech University of
Life Sciences Prague) Milan, Gaff (Department of Wood Processing,
Czech University of Life Sciences Prague) Adam, Sikora (Department
of Wood Processing, Czech University of Life Sciences Prague)
Adam, Sikora (Department of Wood Processing, Czech University of
Life Sciences Prague) Milan, Gaff (Department of Wood Processing,
Czech University of Life Sciences Prague) tepn, Hysek (Department
of Wood Processing, Czech University of Life Sciences Prague)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Hak Gu Lee ([email protected], Korea Aerospace University,
South Korea) Jungwan Lee (KIMS, South Korea)
Amar Boukerrou ([email protected], Universiy of Bejaia,
Algeria) Dalila Hammiche (University of Bejaia, Algeria) Hocine
Djidjelli (University of Bejaia, Algeria)
Jean Gulla ([email protected], Institut Clment Ader,
France) Xiaojing Gong (Institut Clment Ader, France) Arthur
Cantarel (Institut Clment Ader, France) Marie-Laetitia Pastor
(Institut Clment Ader, France)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Mohammad Arsalan, Khan ([email protected], Aligarh
Muslim University, India) Gaurav, Singh (Aligarh Muslim University,
India) Jamal, Ahmad (Aligarh Muslim University, India)
Mohammad Arsalan, Khan ([email protected], Aligarh
Muslim University, India) Ahmed, Elsheikh (University of Dundee,
United Kingdom) Iqtedar Ahmad, Khan (University of Dundee, United
Kingdom)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Binod, Aryal ([email protected], School of Engineering
and Information Technology, University of New South Wales at The
Australian Defence Force Academy, Australia) Evgeny V., Morozov
(School of Engineering and Information Technology, University of
New South Wales at The Australian Defence Force Academy, Australia)
Krishna, Shankar (School of Engineering and Information Technology,
University of New South Wales at The Australian Defence Force
Academy, Australia) Ahmed M., Thabet (School of Environment,
Science and Engineering, Southern Cross University, Australia)
Peter J., Moore (School of Engineering and Information Technology,
University of New South Wales at The Australian Defence Force
Academy, Australia)
Jihed Zghal ([email protected], GeM UMR CNRS-Centrale
Nantes, France) Amine Ammar (LAMPA, Arts et Metiers ParisTech,
France) Francisco Chinesta (High Performance Computing Institute
ICI , Centrale Nantes, France) Christophe Binetruy (GeM UMR
CNRS-Centrale Nantes, France) Emmanuelle Abisset-Chavanne (High
Performance Computing Institute ICI , Centrale Nantes, France)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Sorin Miclos ([email protected], National Institute of R&D for
Optoelectronics INOE-2000, Romania) Dan Savastru (National
Institute of R&D for Optoelectronics INOE-2000, Romania) Roxana
Savastru (National Institute of R&D for Optoelectronics
INOE-2000, Romania) Ion Lancranjan (National Institute of R&D
for Optoelectronics INOE-2000, Romania)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Dan Savastru (National Institute of R&D for Optoelectronics
INOE-2000, Romania) Sorin Miclos ([email protected], National
Institute of R&D for Optoelectronics INOE-2000, Romania) Roxana
Savastru (National Institute of R&D for Optoelectronics
INOE-2000, Romania) Ion Lancranjan (National Institute of R&D
for Optoelectronics INOE-2000, Romania)
Ester Jaln (Department of Continuum Mechanics and Structural
Analysis, Universidad Carlos III de Madrid, Spain) Jos Antonio Loya
(Department of Continuum Mechanics and Structural Analysis,
Universidad Carlos III de Madrid, Spain) Carlos Santiuste
([email protected], Department of Continuum Mechanics and
Structural Analysis, Universidad Carlos III de Madrid, Spain)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
Marcin Kami ski ([email protected], Department of
Structural Mechanics, Faculty of Civil Engineering, Architecture
and Environmental Engineering, Poland)
Iclal Avinc Akpinar (Independent Researcher, Turkey) Salih
Akpinar ([email protected], Erzurum Technical
University, Turkey) Belin Kanar (Erzurum Technical University,
Turkey) Hamit Akbulut (Ataturk University, Turkey) Adnan Ozel
(Erzincan University, Turkey)
Chung, S.W. ([email protected], University of Utah, USA)
Hong, S.G. (Seoul National University, South Korea)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Vladimir Sladek ([email protected], Institute of
Construction and Architecture, Slovak Academy of Sciences,
Slovakia) Miroslav Repka (Institute of Construction and
Architecture, Slovak Academy of Sciences, Slovakia) Jan Sladek
(Institute of Construction and Architecture, Slovak Academy of
Sciences, Slovakia)
Min-Gu Han (School of Mechanical Engineering, Chung-Ang
University, Korea South) Seung-Woo Jeon (School of Mechanical
System Engineering, Chung-Ang University, Korea South) Sung-Woo Lee
(School of Mechanical Engineering, Chung-Ang University, Korea
South) Yong Hyeon Cho (Korea Railroad Research Institute, Korea
South) Seung-Hwan Chang ([email protected], School of Mechanical
Engineering, Chung-Ang University, Korea South)
Ji-Hun Bae (School of Mechanical Engineering, Chung-Ang
University, Korea South) Min-Gu Han (School of Mechanical
Engineering, Chung-Ang University, Korea South) Seung-Hwan Chang
([email protected], School of Mechanical Engineering, Chung-Ang
University, Korea South)
-
4-7 September 2017 Conservatoire national des arts et mtiers
(CNAM), France
ICCS20 Conference Proceedings
U.N.D. Perera (Department of Civil Engineering, University of
Moratuwa, Sri Lanka) J.C.P.H. Gamage ([email protected], Department of
Civil Engineering, University of Moratuwa, Sri Lanka)
J.C.P.H. Gamage ([email protected], University of Moratuwa, Sri
Lanka) H.A. Dissanayake (University of Moratuwa, Sri Lanka)
Dong-Hyun, Kim (Department of Mechanical Convergence
Engineering, Hanyang University, South Korea) Kyu-Hyun, Jung
(Department of Mechanical Convergence Engineering, Hanyang
University, South Korea) Dug-Joong, Kim (Department of Mechanical
Convergence Engineering, Hanyang University, South Korea)
Jae-Young, Lim (Hyundai Motor Group R&D division, South Korea)
Byeung-Gun, Nam (Hyundai Motor Group R&D division, South Korea)
Hak-Sung, Kim ([email protected], Department of Mechanical
Convergence Engineering, Hanyang University, South Korea; Institute
of Nano Science and Technology, Hanyang University, South
Korea)
-
20th International Conference on Composite Structures
A.J.M. Ferreira, W. Larbi, J.-F. Deu, F. Tornabene, N.
Fantuzzi
Do-Hyoung, Kim (Hanyang University, South Korea) Ku-Hyun, Jung
(Hanyang Uni