09 WITH URREA STRIKING AND STRUCK TOOLS I ALWAYS GET STRONGER AND INDESTRUCTIBLE. STRIKING AND STRUCK TOOLS . At Urrea I always find what I'm looking for With the striking and struck tools I have what I need for each type of use: Direct striking tools (hammers and mallets) and indirect striking tools (chisels, punches and drift pins). Together they are very useful in industrial applications (machinery, assembly lines, maintenance) and for automotive service (engines, body, tires). Struck tools include those used for cutting or breaking materials, in addition to the traditional hammer of mechanic or ball, hammers designed especially so as not to deform, mark or damage the parts subjected to blows. The materials used in these types of hammers are the bronze, aluminum bronze, plastic or rubber. There are also hammers designed specifically for the service of automotive laminate whose geometries allow coupling with the shapes of the bodies of cars. Among the tools that transmit blows are those designed to cut or break materials, which are used to mark, those used to assist in the centering of bits and those used to install or remove bolts and rivets, in the latter are made of steel and bronze when the materials are not required to be marked or damaged. This section also presents the punching tools, useful tools for drilling or making rubber washers or any material used for packaging, and bars for alignment whose design facilitates the alignment or disassembly of machinery elements. They meet national and international, American and European standards. The quality image of these products is reinforced by the indelible and permanent mark showing the country of origin. This mark meets standards set by the Federal Trade Commission in the United States. urreaprofessionaltools.com
14
Embed
STRIKING AND STRUCK TOOLS. - urrea.comDirect striking tools (hammers and mallets) and indirect striking tools (chisels, punches and drift pins). Together they are very useful in industrial
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
09
WITH URREA STRIKING AND STRUCK TOOLS I
ALWAYS GET STRONGER AND INDESTRUCTIBLE.
S T R I K I N G A N D S T R U C K T O O L S .At Urrea I always find what I'm looking forWith the striking and struck tools I have what I need for each type of use:
Direct striking tools (hammers and mallets) and indirect striking tools (chisels, punches and drift pins).Together they are very useful in industrial applications (machinery, assembly lines, maintenance) and for automotive service (engines, body, tires).
Struck tools include those used for cutting or breaking materials, in addition to the traditional hammer of mechanic or ball, hammers designed especially so as not to deform, mark or damage the parts subjected to blows.The materials used in these types of hammers are the bronze, aluminum bronze, plastic or rubber.There are also hammers designed specifically for the service of automotive laminate whose geometries allow coupling with the shapes of the bodies of cars.
Among the tools that transmit blows are those designed to cut or break materials, which are used to mark, those used to assist in the centering of bits and those used to install or remove bolts and rivets, in the latter are made of steel and bronze when the materials are not required to be marked or damaged.
This section also presents the punching tools, useful tools for drilling or making rubber washers or any material used for packaging, and bars for alignment whose design facilitates the alignment or disassembly of machinery elements.They meet national and international, American and European standards.
The quality image of these products is reinforced by the indelible and permanent mark showing the country of origin. This mark meets standards set by the Federal Trade Commission in the United States.
urreaprofessionaltools.com
ITEM DESCRIPTIONMATERIAL
HEAD WEIGTH FACE DIAMETER HEAD LENGTH HANDLE LENGTH SPARE PART LIST PRICE HEAD HANDLE
9STRIKING AND STRUCK TOOLSSTRIKING AND STRUCK TOOLS
AMERICAN
HICKORY
• New handle design, with shock absorbent guard included.• Made with a malleable bronze alloy that does not fracture or generate splinters.• Bronze head that avoids material distortion.• Ideal for maintenance work, die cutting and molding.• They do not mark, damage or deteriorate the objects.• They do not produce sparkles.• Exceed ASME B107.400. standard.
• The high-impact dead blow hammer, in addition to featuring a head filled with steel shot that makes it weigh more, also has a greater contact area, very useful in the assembly of machinery parts requiring great force.
• Non-slip handle.• Heads are partially filled with steel shot.
• Hickory wood handles are very hard, stiff, and shock resistant.• Includes wood and metal wedges
Bronze head does notdeform stricken materials.
Bronze head does not deform stricken materials.
ITEM LENGTH LIST PRICE
CAB7UH 12” 1 $11.41
CAB10UH 36” 1 $25.05
CAB7UHSpare handles for american hickory
sledge hammers
ITEM QUANTITYRMARRU 1
1436G 41437G 41438G 41439G 41440G 4
1436GFV 21437GFV 21438GFV 21439GFV 21440GFV 2
HA
MM
ER
S
SHOCKSHOCK
ITEM DESCRIPTION LIST PRICE
RMARRUC Sledge rack with hammer fiberglass and american hickory handles 1 $2,345.85
Contents page 410
1435DBDead blow impact sledge hammers
1430FVBronze hammer with fiberglass handle
1430Bronze hammer with wooden handle
9PIECES
ITEM DESCRIPTION FACESMATERIAL
HEAD WEIGTH FACE DIAMETER HEAD LENGTH HANDLE LENGTH LIST PRICE HEAD HANDLE
1366 Black rubber - Rubber Wood 8 oz 1-25/32” 3-1/16” 12-3/8” 1 $11.94
1367 Black rubber - Rubber Wood 16 oz 2-3/16” 3-3/4” 14” 1 $13.26
1368 Black rubber - Rubber Wood 22 oz 2-5/8” 4-1/2” 16” 1 $20.17
1430DBX Dry hit Fixed Fiberglass 32 oz 2” 5” 13-3/4” 1 $88.20
1430DB Dry hit Fixed Fiberglass 32 oz 2” 4-3/8” 13-3/4” 1 $68.75
1432DB Dry hit Fixed Fiberglass 48 oz 2-3/4” 4-3/4” 14-11/16” 1 $93.64
1434PDB High impact Fixed Fiberglass 16 oz 1-51/64” 5-1/8” 12-1/4” 1 $37.54
1435PDB High impact Fixed Fiberglass 24 oz 1-51/64” 5-1/8” 12-1/4” 1 $40.39
urreaprofessionaltools.com192
9 STRIKING AND STRUCK TOOLS
RUBBER MALLETS
• Mallets with rubber heads are ideal for mechanics, bodyworkers, brass workers and carpenters. Very useful for striking large pieces requiring special care.
• Head made of neoprene rubber that delivers strong blows without damaging the stricken object.
• Oak handle provides excellent impact resistance.
• Deformation occurs on the face, not on the hit object.• Works by moving the steel shot and partially filling
the head, when shot falls for rebound and controls hammer.
• Body composed of a steel body with two fixed faces made of cellulose acetate, designed for use on metals and other materials susptible to strike marks or deformations.
• Oak handle provides excellent impact resistance.• Its beige color ensures non-marring.
• Oak handle provides excellent impact resistance.• Its gray color ensures non-marring
HA
MM
ER
S
1366With black color rubber head
1368BWith beige color rubber head
1368GWith grey color rubber head
16 oz. with interchangeable facesITEM FACE DIAMETER HEAD LENGTH LENGTH LIST PRICE
SF150HK 1-1/2” 4” 11-1/2” 1 $177.60
Interchangeable faces for 1-1/2” dead blow hammersITEM STRIKE FORCE COLOR HARDNESS LIST PRICE
SF15SS SUPER SOFT Shore a instantaneous 45-58 2 $11.66
SF15ST SOFT Shore A 30 sec. 45 - 58 2 $11.66
SF15M MEDIUM Shore A 30 sec. 59 - 72 2 $11.66
SF15T RUGGED Shore A 30 sec. 59 - 73 2 $11.66
SF15MH MEDIUM HARD Shore D 30 sec. 40 - 48 2 $18.92
SF15H HARD Shore D 30 sec. 49 - 65 2 $18.92
SF15XH EXTRA HARD Shore D 30 sec. 65 - 86 2 $18.92
SF16S SOLID 38 - 46 HRC 2 $27.29
SF16B SOLID 74 - 76 HRB 2 $29.80
SF15016 oz. dead blow hammer (does
not include interchangeable faces)
1430DBXFixed face dead blow hammer
1430DBHeavy-duty high-impact hammer
1434PDBHigh-impact hammer
Content faces types:
Super soft (gray)Soft (brown)Medium (red)
Rugged use (green)Medium rough (beige)
Hard (black)Extra hard (yellow)
Steel
ITEM DESCRIPTION MILLEDFACES HANDLE MATERIAL HEAD WEIGTH FACE DIAMETER HEAD LENGTH HANDLE LENGTH LIST PRICE
1316HD Steel rods and rubber grip handle Rubber grip 16 oz 1-1/2” 4” 14” 1 $81.331320HD Steel rods and rubber grip handle Rubber grip 20 oz 1-9/16” 4-9/32” 14” 1 $87.24
1324HD Steel rods and rubber grip handle Rubber grip 24 oz 1-1/4” 4-1/2” 14" 1 $84.841332HD Steel rods and rubber grip handle Rubber grip 32 oz 1-1/2” 5" 14" 1 $92.651348HD Steel rods and rubber grip handle Rubber grip 48 oz 1-7/8” 5-9/16” 14” 1 $112.94
1324FVS Machined head short fiberglass handle • Fiberglass handle 24 oz 1-1/2” 4-7/8” 9" 1 $32.021332FVS Machined head short fiberglass handle • Fiberglass handle 32 oz 1-5/8” 5-1/8” 9" 1 $34.801308FV Achined head fiberglass handle • Fiberglass handle 8 oz 1" 3-1/2” 13" 1 $20.551312FV Achined head fiberglass handle • Fiberglass handle 12 oz 1-3/16” 3-3/4” 13" 1 $25.381316FV Achined head fiberglass handle • Fiberglass handle 16 oz 1-5/16” 4-7/32” 13" 1 $28.081324FV Achined head fiberglass handle • Fiberglass handle 24 oz 1-1/2” 4-7/8” 15" 1 $35.581332FV Achined head fiberglass handle • Fiberglass handle 32 oz 1-5/8” 5-1/8” 15" 1 $39.281340FV Achined head fiberglass handle • Fiberglass handle 40 oz 1-3/4” 5-9/16” 15" 1 $44.301308P Machined head American Hickory handle • Hickory 8 oz 1" 3-1/2” 12-3/8” 1 $16.561312P Machined head American Hickory handle • Hickory 12 oz 1-3/16” 3-3/4” 12-3/8” 1 $20.451316P Machined head American Hickory handle • Hickory 16 oz 1-5/16” 4-7/32” 13" 1 $22.631324P Machined head American Hickory handle • Hickory 24 oz 1-1/2” 4-7/8” 16" 1 $28.671332P Machined head American Hickory handle • Hickory 32 oz 1-5/8” 5-1/8” 16" 1 $31.661340P Machined head American Hickory handle • Hickory 40 oz 1-3/4” 5-9/16” 18" 1 $35.441348P Machined head American Hickory handle • Hickory 48 oz 1 7/8" 5-7/8” 18" 1 $41.041308PN Machined black head • Oak 8 oz 1" 3-1/2” 12-3/8” 1 $12.091312PN Machined black head • Oak 12 oz 1-3/16” 3-3/4” 14" 1 $14.931316PN Machined black head • Oak 16 oz 1-5/16” 4-7/32” 14" 1 $16.521324PN Machined black head • Oak 24 oz 1-1/2” 4-7/8” 16" 1 $20.931332PN Machined black head • Oak 32 oz 1-5/8” 5-1/8” 16 1 $23.111340PN Machined black head • Oak 40 oz 1-3/4” 5-9/16” 18" 1 $26.061348PN Machined black head • Oak 48 oz 1 7/8" 5-7/8” 18" 1 $29.961324E Machined black head fluted handle • Oak 24 oz 1-1/2” 4-7/8” 16" 1 $22.391332E Machined black head fluted handle • Oak 32 oz 1-5/8” 5-1/8” 16" 1 $24.72
193
9STRIKING AND STRUCK TOOLSSTRIKING AND STRUCK TOOLS
BALL PEIN HAMMERS
1324HDIndestructible handle ball pein hammer
MILLEDFACES
• Forged and tempered steel alloy head.• Fiberglass handle with rubber grip to
reduce vibrations.• Short handle brings more confort on
repetitive operations.• New handle design, with shock
absorbent guard included.
1324FVSShort black ball pein hammer with fibberglass handle
• Hickory wood handles are very hard, stiff, and shock resistant.
MILLEDFACES
• Forged and tempered steel alloy head.
• Oak wood handle brings more shock resistance.
• Laser engraving on handle for better grip.
• Forged and tempered steel alloy head.
• Oak wood ergonomic handle brings more shock resistance.
• Laser engraving on handle for better grip.
MILLEDFACES
1332FVPolished ball pein head hammer with fiberglass handle
1332PPolished ball pein head hammer with hickory wood
handle
1316PBlack ball pein hammer with
oak handle
1324EBlack ball pein hammer with ergonomic oak
handle
MILLEDFACES
MILLEDFACES
Includes wood and metal wedges.
Includes wood and metal wedges.
AMERICAN
HICKORY
HA
MM
ER
S
AMERICAN
HICKORY
• Forged and tempered steel alloy head. • Fiberglass handle with rubber grip to
reduce vibrations. • New handle design, with shock
absorbent guard included.
• Fixed steel plate that eliminates possibility of handle loosing or detaching.
• 2 9/32” steel rods through the handle, soldered to the head so it does not detach.
• Hitting face with 50-58 HRc hardness.• Plastic thimble.• Induction hardened hitting zone.
NEWNEW
Spare american hickory handle for ball pein hammers
ITEM LENGTH LIST PRICE
CAB1UH 12” 1 $9.94
CAB2UH 14” 1 $10.21
CAB3UH 16” 1 $10.64
CAB4UH 18” 1 $10.88
Spare oak ergonomic handle 1324E and 1332EITEM LENGTH PRICE LIST
CAB6U 16” 1 $4.79
ITEM DESCRIPTIONMATERIAL
HEAD WEIGTH FACE DIAMETER HEAD LENGTH HANDLE LENGTH LIST PRICE HEAD HANDLE
1616HD Single piece forged steel with rubber grip handle Steel Rubber grip 16 oz 1-1/8” 5” 13” 1 $70.98
Specially designed to remove welding slag, both flat surface and corners.Microalloyed steel forged head for maximum impact resistance.
CHOPPING AXES
AX9 AX28
• Light handle weight which offers same resistance than steel. • TPR grip reduces hand strain and makes comfortable and better control.• Made of special alloy of nylon fiberglass and steel, which gives an excellent
resistance to the handle.• Forged carbon steel head with PTFE coating.• It is used to cut limbs from trees directly into medium and large pieces due to its
easy handling.• Due to its form of the head allows us to make the cuts diagonally and is also
useful making firewood from fallen trees.
AX14
NEWNEW HA
MM
ER
S
ITEM DESCRIPTION HANDLE MATERIAL HEAD MATERIAL HEAD WEIGTH HANDLE LENGTH TOTAL LENGTH LIST PRICE
• Ideal for making firewood into smaller and pieces for storage and direct use to the fire, since the head is like an anvil and cuts with greater efficiency to operate the axe.
• Light handle weight which offers same resistance than steel. • TPR grip reduces hand strain and makes comfortable and better
control.• Made of special alloy of nylon fiberglass and steel, which gives an
excellent resistance to the handle.• Forged carbon steel head with PTFE coating.
SPLITTING AX
NEWNEW
Unbreakable insert-molded head will not loosen.
Anti-shockhandle
Unbreakable insert-molded head will not loosen.
Anti-shockhandle
Unbreakable insert-molded head will not loosen.
Anti-shockhandle
Unbreakable insert-molded head will not loosen.
Anti-shockhandle
ITEMMATERIAL
HEAD WEIGTH HEAD LENGTH HANDLE LENGTH TOTAL LENGTH LIST PRICE HEAD HANDLE
1410 Steel Anti-shock 12 oz 7 1/4” 11-1/4” 12” 1 $20.14• New handle design, with shock absorbent guard included.
From 1/8” to 2”ITEM PIECES LIST PRICE
49902A 28 1 $1,253.45
urreaprofessionaltools.com196
9 STRIKING AND STRUCK TOOLS
For sheet metal, 5/8” to 1 1/14” in plastic caseITEM EXTERNAL CUTTING DIAMETER LIST PRICE
50900 7 1 $197.35
Knockout punchesCÓDIGO EXTERNAL CUTTING DIAMETER LIST PRICE
509-1/2 1/2" 1 $38.75
509-3/4 3/4" 1 $40.59
509-7/8 7/8" 1 $47.47
509-1 1" 1 $54.30
509-1-1/4 1-1/4" 1 $62.18
509-1-1/2 1-1/2" 1 $74.26
509-2 2" 1 $123.03
509-2-1/2 2-1/2" 1 $221.04
509-3 3" 1 $277.92
509-3-1/2 3-1/2" 1 $284.51
509-4 4" 1 $383.27
• Hitting area, built in handle.• Redesigned chuck, capable of holding more than one punch at a time, with retractable
centering tip.• Gun-type handle, for a more secure and comfortable hit that avoids vibration keeping the
hand away from the area of hit.• Made of high carbon steel, 53 to 66 oRC hardness, handle made of impact-resistant alloy
steel, polypropylene pouch. System to use 2 or more punch at a time.• Fields of application: general industrial maintenance and automotive mechanics.• Uses: for cutting washers and sealing foam rings, cardboard, leather, rubber, fiber, plastic,
1/8” to 3/4” in plastic caseITEM PIECES LIST PRICE
49901 11 1 $305.52
3 to 30 mm in plastic caseITEM PIECES LIST PRICE
49900M 16 1 $476.33
CONTENT
3 mm 16 mm4 mm 18 mm6 mm 20 mm8 mm 22 mm10 mm 24 mm12 mm 26 mm14 mm 30 mm
ACCESSORIESHandle adapter
Plastic case
• Saves time in perforation, serration, filing and manual adjustments.• Makes burr-free, clean holes to install conduit pipes, controls, instruments and for sheet
metal boxes.• Easy to use tools.• Can be operated with a common wrench.• Assortment of hole punches for different hole sizes.
EXTERNAL CUTTING
DIAMETER5/8”3/4”1”
1-1/4”
SCREWS
1”1-1/2”1-3/4”
KNOCKOUT PUNCHES
• Cutting capacity: 2 mm for steel sheets and 1.5 mm for stainless steel sheets.
• Rectified blade that guarantees an accurate cut.• Bronze washer reduces friction to turn easily.
Drift pins, punches, and chiselsITEM PIECES LIST PRICE
NO.46 26 1 $156.12
197
9STRIKING AND STRUCK TOOLSSTRIKING AND STRUCK TOOLS
16PIECES
Drift pins and punchesITEM PIECES LIST PRICE
NO.6 16 1 $88.37
Drift pins, punches and chiselsITEM PIECES LIST PRICE
NO.5 12 1 $65.96
COMBINATION SETS OF CHISELS, PUNCHES AND DRIFT PINS
Brass tapered & straight drift punch setITEM PIECES LIST PRICE
49904 3 1 $213.05
Brass straight drift punch setITEM PIECES LIST PRICE
49903 3 1 $83.55
Brass tapered drift punches
ITEM TIP DIAMETER
SHAFT DIAMETER
TOTAL LENGTH LIST PRICE
49915 3/8" 3/4" 10" 1 $75.00
49916 7/16" 3/4" 14" 1 $90.10
Brass straight drift punches
ITEM TIP DIAMETER
SHAFT DIAMETER
TOTAL LENGTH LIST PRICE
49920 1/2” 1/2” 7” 3 $18.90
49922 3/4” 3/4” 8” 3 $34.74
49923 3/4" 3/4" 12" 1 $73.72
• Knurled grasping area for a better grip.• Brass punches are used instead of steel
punches in non- marring applications and to constrain sparking.
DIAMETER
3/4"Shaft 3/4" x tip 3/8"Shaft 3/4" x tip 7/16"
BRASS PUNCHES
HO
LL
OW
PU
NC
HE
S
Chisels, drift pins and punchesITEM PIECES LIST PRICE
NO.2 10 1 $42.00
Chisels, drift pins and punchesITEM PIECES LIST PRICE
NO.3 5 1 $23.80
Chisels, drift pins and punchesITEM PIECES LIST PRICE
NO.4 5 1 $24.70
4992349915
26PIECES
ITEM SIZE
47-1/4X3/32 1/4 x 3/32”47-5/16X1/8 5/16 x 1/8”
47-5/16X5/32 5/16 x 5/32”47-3/8X3/16 3/8 x 3/16”47-1/2X1/4 1/2 x 1/4”50-1/4 1/4 x 1/16”50-1/4 1/4 x 3/32”
50-5/16 5/16 x 1/8”50-3/8 3/8 x 3/16”
50-7/16 7/16 x 7/32”50-1/2 1/2 x 1/4”
ITEM SIZE
96-3/8 3/8 x 3/16”
96-1/2 1/2 x 1/4”41-3/8 3/8 x 1/8”41-1/2 1/2 x 3/16”44-3/8 3/8 x 5/32”E514 Pouch
ITEM SIZE
47-1/4X 3/32 1/4 x 3/32”47-5/16X1/8 5/16 x 1/8”47-5/16X5/32 5/16 x 5/32”47-3/8X3/16 3/8 x 3/16”50-5/16 5/16 x 1/8”50-3/8 3/8 x 3/16”96-3/4 3/4 x 3/8”41-3/8 3/8 x 1/8”
86A-3/16 1/4 x 3/16”86A-5/16 5/16 x 5/16”86A-7/16 7/16 x 7/16”86A-1/2 1/2 x 1/2”
E519 Pouch
12PIECES
ITEM SIZE
47-5/16X5/32 5/16 x 5/32”50-3/8 3/8 x 3/16”41-3/8 3/8 x 1/8”
86A-7/16 7/16 x 7/16”86A-1/2 1/2 x 1/2”
E518 Pouch
ITEM SIZE
41-3/8 3/8 x 1/8”47-5/16X1/8 5/16 x 1/8”47-3/8X3/16 3/8 x 3/16”
50-5/16 5/16 x 1/8”86A-1/2 1/2 x 1/2”
E300 Pouch
ITEM SIZE41-3/8 3/8 x 1/8”
47-1/4X3/32 1/4 x 3/32”47-5/16X1/8 5/16 x 1/8”47-3/8X3/16 3/8 x 3/16”50-3/16 1/4 x 1/16”50-5/16 5/16 x 1/8”50-3/8 3/8 x 3/16”
86A-1/4 1/4 x 1/4”86A-3/8 3/8 x 3/8”
86A-7/16 7/16 x 7/16”
E307 Pouch
DIAMETER
3/8”1/2”3/4”
ITEM SIZE
41-3/8 3/8 x 1/8”
41-1/2 1/2 x 3/16”
44-5/16 5/16 x 7/64”
47-1/4X3/32 1/4 x 3/32”47-5/16X1/8 5/16 x 1/8”
47-5/16X5/32 5/16 x 5/32”47-3/8X3/16 3/8 x 3/16”
47-7/16X7/32 7/16 x 7/32”47-1/2X1/4 1/2 x 1/4”
ITEM SIZE
50-1/4 1/4 x 3/32”50-5/16 5/16 x 1/8”50-3/8 3/8 x 3/16”50-7/16 7/16 x 7/32”50-1/2 1/2 x 1/4”
86A-3/16 1/4 x 3/16”86A-1/4 1/4 x 1/4”86A-5/16 5/16 x 5/16”86A-7/16 7/16 x 7/16”86A-1/2 1/2 x 1/2”86A-5/8 5/8 x 5/8”
86A-3/4X8 3/4 x 3/4”86A-7/8X8 7/8 x 1”86A-1X8 1 x 1-3/16”
ITEM SIZE
96-5/16 5/16 x 1/8”
96-3/8 3/8 x 3/16”
96-1/2 1/2 x 1/4”E516 Pouch
3PIECES
10PIECES
5PIECES
5PIECES
3PIECES
urreaprofessionaltools.com198
9 STRIKING AND STRUCK TOOLS
CHISEL SET
ITEM 86D 86B 86C 86APIECES 10 7 5 5
PACKING
1 1 1 1ITEM TIP SIZE BODY SIZE LENGTH LIST PRICE $63.63 $36.08 $21.06 $29.06
• Designed to remove, cut or break materials with a hardness softer than the chisel’s, such as concrete, rock, slag, brass, untreated steel, nuts, bolts, pins, etc. It is widely used in the construction industry, as well as in the installation and maintenance of fixed equipment and piping in the chemical and food industries. The tip’s width dictates the chisel’s uses, depending on the accuracy or brute force required.
• The tool’s butt end is designed to withstand strikes.• Tip wider than body.• Designed to remove cold materials like iron, brass, bronze and steel.
• 3 5/16” Plastic protection handle.• Provides hand protection from a missed hit while being
used.
86G-5/8Cold cut cheasel with handle
CH
ISEL
S, P
UN
CH
ES A
ND
DR
IFT
PIN
S
Square punch and chisel holderITEM SHAFT DIAMETER TOTAL LENGTH LIST PRICE
2108A 3/8” 8-1/2” 1 $32.54
Round punch and chisel holderITEM SHAFT DIAMETER TOTAL LENGTH LIST PRICE
2108 3/8” 8-1/2” 1 $27.12
PUNCH AND CHISEL HOLDERS
• Tip wider than body.• Edge opposite to tip designed to endure hits.• Exceed ASME B107.410 standard.
• Reduces the risk of hand injury. Ideal for holding punches and chisels up to 1 inch in diameter.• Up to 1” holding capacity.• High-resistance ergonomic plastic handle.• Chrome-vanadium steel shaft.
72-3/8Cape chisels
86A-1/2Cold cut chisels
199
9STRIKING AND STRUCK TOOLSSTRIKING AND STRUCK TOOLS
PUNCHES AND DRIFT PINS SET
ITEM 50A 96A 99BPIECES 6 7 5
PACKING
1 1 1ITEM DESCRIPTION WIDTH TIP SIZE TOTAL LENGTH LIST PRICE $29.94 $74.47 $50.34
Short tapered drift punches Long tapered drift punches
• Drift pins are used to install or remove guide bushings, pins, and center guides. Their length is important and it depends on the job. Straight pins can also be used to align holes when assembling parts.
• Straight tip, ideal for installing or removing guide bushings when die-cutting.• The tool’s butt end is designed to withstand strikes.• Tapered tip, ideal for installing or removing pins and center guides in deep holes.
• Straight tip, ideal for installing and removing guide bushes in die-cutting.• Exceed ASME B107-410 standard.
CH
ISEL
S, P
UN
CH
ES A
ND
DR
IFT
PIN
S
96-1/250-3/16
urreaprofessionaltools.com200
9 STRIKING AND STRUCK TOOLS
PRICK PUNCH SET
ITEM 41A 44APIECES 5 5
PACKING
1 1ITEM WIDTH TIP SIZE TOTAL LENGTH LIST PRICE $27.40 $27.40
Apply up to 3,500 PSI force. The user can easily control the amount of force applied by adjusting the spring’s tension.
This highly accurate tool offers great control. Ideal for work in tight areas or on jobs requiring great precision.
JUEGOS DE MARCADORES Y BOTADORES CON RESORTE
Spring-loaded chisel and punch set
ITEM PIECES LIST PRICE
8641S 4 1 $109.64
JUEGOS DE MARCADORES Y BOTADORES CON RESORTE
Spring-loaded punch set
ITEM PIECES LIST PRICE
47BS 4 1 $109.64
SPRING-LOADED PUNCH SET
CH
ISEL
S, P
UN
CH
ES A
ND
DR
IFT
PIN
S • 50° center punches are used to mark pieces in manufacturing or assembly. 90° prick punches are used to center the bore point and prevent tips from slipping off.
DESCRIPTIONChisel 5/16” (7.9 mm)
Double tip pouchSelf-centering punch
Short self-centering punchPlastic case
DESCRIPTION5/32”1/8”3/32”1/16”
Plastic case
41-5/841-1/2
4PIECES
4PIECES
201
9STRIKING AND STRUCK TOOLSSTRIKING AND STRUCK TOOLS