STRETCHER // PC-610/7promeba.com/wp-content/uploads/2016/04/MANUAL-CAMILLA-PC... · 2018. 11. 28. · 01INTRODUCTION 01.1Useing this manual 05 01.2Technical ... Green, located on

USER GUIDE

STRETCHER // PC-610/7Review 01/15

USER MANUAL // STRETCHER PC-610/7Review 01/15

3

01 INTRODUCTION

01.1 Useing this manual 0501.2 Technical datasheet 07

02 INSTALLATION

02.1 Transport and unpacking 09

03 OPERATION

03.1 Elements 1103.2 Commands 1503.3 Loading and unloading operation 1703.4 Tensors 19

04 MOUNTING AND COMPONENTS

04.1 General view STRETCHER PC-610/7 2104.2 Set structure PC-610/7 2204.3 Telescopic Hand Grips PC-610/7 2404.4 Backrest regulator set PC-610/7 2604.5 Backrest set PC-610/7 2804.6 Lateral shift handrail set PC-610/7 3004.7 Universal pole IV set PC-610/7 3204.8 Standard fixed leg set PC-610/7 3404.9 Standard revolving standard leg set PC-610/7 3604.10 Inverted fixed leg set PC-610/7 3804.11 Inverted revolving standard leg set PC-610/7 40

05 GENERAL MAINTENANCE 42

06 LEGAL NOTICES 43

07 PRODUCT WARRANTY 44

INDICE

MODEL PC-610/7STANDARD CONFIGURATION

MODEL PC-610/7INVERTED CONFIGURATION


5

01.1 Using this manual

This manual provides using and maintenance instruc-tions of the product, as well as the way of fixing minor faults that could appear.

It is recommended before the operation of the product to read carefully this manual in order to avoid damages caused by a misuse.

Do not lose this document, it should be accessible to any doubt that could appear by medical personnel.

Remember that a good use and maintenance are ne-cessary for the proper operation of the product.

Each product incorporates an identification sticker with the serial number and the model. Keep these numbers so that they can be indicated to the dealer if necessary.

01 INTRODUCCIÓN


6

01 INTRODUCTION

01.2 Technical data sheet

MEASURES AND FEATURES // PC-610/7 - STANDARD

LENGHT 1920 mm INTERMEDIATE STOP 680-740 mm

WIDTH 580 mm FOLDED HEIGHT 330-300 mm

HEIGHT 330-880 mm MAX. LOAD 250 Kg

WEIGHT 43 Kg

1920

580

880

800

300

330

740

680


7

MEASURES AND FEATURES // PC-610/7 - INVERTED

LENGHT 1920 mm INTERMEDIATE STOP 680-740 mm

WIDTH 580 mm FOLDED HEIGHT 330-300 mm

HEIGHT 330-880 mm MAX. LOAD 250 Kg

WEIGHT 43 Kg

01 INTRODUCTION

1920

580

880

800

300

740

680

330


9

02.1 Transporting and unpacking

First remove the packaging carefully to prevent dama-ge to the exterior of the stretcher.

1. Transporting

· Always fix the load, if piling up is necessary always follow the scheme shown.

· Transport the leveled load and following all precepts and rules for the transport of loads.

2. Unpacking

· Place the box on a flat, stable surface and open the seal being careful not to damage the inside.

· Remove the stretcher from the inside of the load as shown in the scheme below.

Each stretcher has been minutely examined when lea-ving the factory. To ensure that it has not been dete-riorated during transport, please carefully inspect the outside and the inside, and in case of finding any im-perfection, immediately contact the installer.

For an optimum operation, the stretcher must be leve-led.

02 INSTALACIÓN

PACKING UNITRRESPECT THE PACKING’S TRANSPORT POSITION

PRODUCT’S UNPACKINGALWAYS USE A FLAT BASE SUPPORT


11

03.1 Elements PC-610/7

1. Handrail with lateral shift2. Grip rings to elevate the legs in trendelemburg position3. Footrest4. Rear leg operating lever5. Front leg operating lever6. Third anchor point7. Rear wheels brake8. Front revolving wheels9. Skate for a smoother load10. Stretcher’s guide protective disks11. Front leg holding position operating lever12. Telescopic hand grips13. Universal pole IV14. Backrest with adjustable inclination in 6 positions

03 OPERATING

1

8

6

7

3

4

11

10

9

13

2

14

5

12


12


03 OPERATING

1

12 14


13

03 OPERATING

13


2

8 4


15

03.2 Commands PC-610/7

01. REAR LEGS UNLOCKING LEVER

Green, located on the stretcher’s left side. The legs of the rear side will unlock by operating the lever in order to place the stretcher in loading and unloading position.

02. FRONT LEGS UNLOCKING LEVER

Red, located on the stretcher’s right side. The legs of the front side will unlock by operating it in order to place the stretcher in loading and unloading position.

03. HOLDING POSITION LEVER

Red, located on the front right side. It allows a second posi-tion which facilitates the loading of the patient.

03 OPERATING

01 02 03

01

01

01


17

03.3 Loading and unloading operation

LOADING

· Open the loading ramp of the bench/rail (A)· Place the stretcher head-on in relation to the loading axle of the bench (A)· Approach the stretcher until the front wheels have contact with the loading ramp (B)· Operate the right lever (RED) to unlock the front wheels (C)· Decisively push to slide the stretcher into the ambulance (D)· As the rear leg approaches, press the left lever (GREEN) to release the legs (E)· Keep pushing until the stretcher is fully loaded (E)· Pay attention to the third anchor point, you may heard a CLICK (in case of being installed)· Close the loading ramp

UNLOADING

· Open the loading ramp of the bench/rail· Release the stretcher’s closure by operating the lever (in case of being installed)· Pull the stretcher. It will slide outward, hold it with the hands· Fold the loading ramp

A

03 OPERATING

B

C D

E F


19

03 OPERATING

03.4 Tensors

To adjust the tension of the drive cables, the stretcher has three sets of tensioners for adjunstment:

1. HANDLE UNLOCKING BACK LEGS2. HANDLE UNLOCKING FRONT LEGS3. INTERMEDIATE STOP SHAFT

To regulate the tensioners, you have a clamping flange where you can replace the tensioning cable (if it breaks) or regulate its tension.

To adjust the tension of the cable has two locknuts (D). Using a wrench 11 loosen the nut 2 and adjust the tension of the cable using the nut 1. Tighten the nuts 1 and 2 again.

If the cable breaks, proceed to cut the cap, loosen the screws (A-B) and remove the cable pulling from the handle terminal (C).

1

2

3

1

2

3

A

B

C

D

2

1

PC-610/7STANDAR CONFIGURATIONSEE ASSEMBLY ON PAGE 22



21

04 MOUNTING AND COMPONENTS

04.1 General view STRETCHER PC-610/7



10

09

08

06

05

02

07

01

04

03


22

04 MONTAJE Y DESPIECE

04.2 Set structure PC-610/7


23


04.2 Bill of materials: SET STRUCTURE PC-610/7

ELEMENT CODE - DESCRIPTION UNITS

1.01 PC6100-03052 - TUB REPOSAPEUS 11.02 PC6500-03182 - PERFIL SUPERIOR 21.03 TAP-PLASTØ20 - TAPON PLASTICO FINAL Ø20 - MOD. 17-20 41.04 PC6170-03092 - SUBCONJUNT TRAVESSER DAVANTER 11.05 PC6170-03262 - PATI DAVANTER DRETA AMPLA 11.06 PC6500-03970 - CONJUNT MANETA REFORÇADA VERMELLA 11.07 PC6500-03060 - COIXINET GIR PATI 21.08 PC6500-03050 - BRIDA PATÍ 21.10 PC6500-03432 - SOPORT CABLE PATI 21.11 PC6170-03272 - PATI DAVANTER ESQUERRA AMPLA 11.13 PC6500-03792 - LATERAL U SOPORT POTES DAVANTER 21.14 PC6500-03950 - FEMELLA SUBJECCIO PATI DAVANTER 21.15 VASTEG PISTÓ STABILUS 6008YF 11.16 PC6170-03250 - FEMELLA SUBJECCIO CENTRAL 21.17 PC6170-01031 - CASQUELL POTES 41.18 PC6500-03112 - LATERALS U SOPORT POTES 21.19 PC6100-03151 - TORRIO ENGANCHE 11.20 TAPPLA-30X20 - TAPON PLASTICO INTERIOR 30X20 21.21 PC6500-03812 - TOPE POTA POSTERIOR 21.22 PC6170-03422 - PATI DAVANTER DRETA SIMPLE 11.23 PC6500-03840 - CONJUNT MANETA REFORÇADA GROGA 11.24 PC6170-03300 - MANETA DESPLAÇADA DRETA INJECCIÓ 11.25 PC6170-03330 - MANETA DESPLAÇADA ESQUERRA INJECCIÓ 11.26 PC6170-03012 - SUBCONJUNT GUIA CAMILLA 11.27 CD-RUEDA-100 - RODA 100X24 41.28 PC6500-03470 - CASQUELL MANETES EXTENSIBLES 31.29 PC6500-03242 - SOPORT MANETA ESQUERRA 21.30 PC6170-03012 - SUBCONJUNT GUIA CAMILLA 11.31 31305061 TUERCA D-985 M-6 CINC 31.32 PB4010-00040 - TENSOR UNIVERSAL 31.33 31301071 TUERCA D-934 M-7 CINCADA 71.34 PC6500-03031 - EIX GUIA 21.35 PC6500-03021 - MOLLA COMPRESSIÓ 21.36 PC6500-03040 - PATI GUIA 21.37 PC6500-03990 - POM VERMELL SUERO 21.38 305559 - MOLLA COMPRESSIÓ TENCA 21.39 PC6104-00011 - BALDA OBERTURA AUTOMATICA 11.40 PC6104-00020 - MOLLA BALDA OBERTURA AUTOMATICA 11.41 3111306501 TORNILLO ISO7380 M6X50 CINCADO 11.42 314010601 TUERCA REMACHABLE M-6 CON VALONA TP-30 4


24


04.3 Telescopic hand grips PC-610/7


25



2.01 PC6500-03310 - PERFIL MANETES EXTENSIBLES 12.02 PC6500-03320 - MANETA 12.03 PC6500-03340 - PALANCA BLOQUEJADORA 12.04 PC6500-03470 - CASQUELL MANETES EXTENSIBLES 22.05 PC6500-03351 - MOLLA MANETA EXTENSIBLE 12.06 PA1481-4X26N PASADOR ELASTICO D-1481 4X26 22.07 3111205201 CARGOL D-7984 M5X20 12.08 3110205201 TORNILLO D-912 M5X20 ZN 12.09 PC6500-03330 - PULSADOR 12.10 3160205201 ESPARRAGO D-913 M5X20 ZN 1

04.3 Bill of materials: TELESCOPIC HAND GRIPS PC-610/7


26


04.4 Backrest regulator set PC-610/7


27



3.01 PC6500-06122 - GATELL RESPATLLER 13.02 PC6500-06112 - SUBCONJUNT TUB SOPORT GATELL RESPATLLER 13.03 PC6500-06131 - MOLLA GATELL RESPATLLER 23.04 3110808502 - TORNILLO D-7991 M8X50 13.05 31201061 ARANDELA D-125 M8 CINCADO 13.06 31305081 TUERCA D-985 M-8 CINCADO 13.07 PC6500-06240 - CASQUELL REGULADOR RESPATLLER 13.08 PC6500-05030 - CASQUELL SEPARADOR TAULA 13.09 PC6500-06101 - TUB REGULACIO RESPATLLER 1

04.4 Bill of materials: BACKREST REGULATOR SET PC-610/7


28


04.5 Backrest set PC-610/7


29



4.01 PC6500-06082 - SUBCONJUNT TUB RESPATLLER 14.02 PC6500-06040 - CASQUELL RESPATLLER 44.03 31305081 TUERCA D-985 M-8 CINC 24.04 3110808401 - TORNILLO D-7991 M8X40 24.05 31201081 ARANDELA D-125 M8 CINC 64.06 PC6170-03162 - SUBCONJUNT TRAVESSER LONA 14.07 PC6170-00010 - LONA PC-617 14.08 31305061 TUERCA D-985 M-6 CINC 34.09 PC6170-03132 - TUB PEUS LLARG 14.10 31201061 ARANDELA D-125 M6 CINC 44.11 3111306351 TORNILLO ISO7380 M6X35 CINC 24.12 PC6100-03111 - SUBCONJUNT SOPORT GIR RESPATLLER ESQUERRA 14.13 PC6100-03101 - SUBCONJUNT SOPORT GIR RESPATLLER DRETA 14.14 PC6170-03142 - BIELA REGULACIÓ REPOSAPEUS 1

04.5 Bill of materials: BACKREST SET PC-610/7


30


04.6 Lateral shift handrail set PC-610/7


31



5.01 PC6501-04040 - SUPORT ACCIONAMENT 15.02 PC6501-04090 - CASQUELL SEPARADOR L25 25.03 2802000001 TORNILLO M5 X10 TAPTITE PLANO 65.04 PC6501-04060 - SUPORT BARANA 25.05 PC6501-04150 - FEMELLA UNIO TUB OVAL 25.06 PC6501-04150 - MASCLE UNIO TUB OVAL 25.07 PC6501-04112 - TUB OVAL BARANETA 15.08 PC6501-04161 - GATELL I MANETA ACCIOMANENT BARANETA 15.09 PC6501-04140 - MOLLA GATELL BARANETA 15.10 PC6501-04080 - CASQUELL SEPARADOR L18 15.11 PA1481-3X20N PASADOR ELASTICO D-1481 3X20 NEGRO 25.12 PA1481-4X10N PASADOR ELASTICO D-1481 4X10 NEGRO 15.13 3131305101 TORNILLO ISO7380 M5X10 CINCADO 45.14 3110204251 - TORNILLO D-7981 Ø4,1X30 BZ CINCADO 25.15 31201061 ARANDELA D-125 M6 CINCADO 45.16 3111305451 TORNILLO ISO7380 M5X45 CINCADO 45.17 CASQUELL SEPARADOR L30 2

04.6 Bill of materials: LATERAL SHIFT HANDRAIL SET PC-610/7


32

04.7 Universal pole IV PC-610/7


33


6.01 PC6170-03480 - PORTASUERO UNIVERSAL POLE IV S03 16.02 PC6170-03500 - SUPORT BARANA PORTASUEROS UNIVERSAL 16.03 PC6170-03490 - CASQUELL GIRO PORTASUEROS 16.04 3110408451 TORNILLO D-933 M8X45 CINCADO 16.05 472104301 - PALOMILLA CON CASQUILLO ROSCADO M8 1

04.7 Bill of materials: UNIVERSAL POLE IV PC-610/7


34

04.8 Standard fixed leg set PC-610/7


35


7.01 3111208161 - TORNILLO D-7984 M-8X16 CINCADO 47.02 3111308801 TORNILLO ISO7380 M8X80 CINCADO 27.03 PC6170-02012 - SUBCONJUNT POTA FIXE 17.04 31203081 ARANDELA D-6798A PARA M8 CINCADO 47.05 PC6501-02052 - TAPA EXTERIOR POTA DAVANTERA 27.06 PC6500-01082 - SOPORT TIRANT 27.07 PC6500-01091 - TRAVESSER INCLINAT 17.08 PC6500-01261 - CONJUNT VARILLA TRAVESSER POTA 17.09 31305101 - TUERCA D-985 M-10 CINCADO 17.10 PC6170-01062 - SUBCONJUNT TIRANT POTES EXTRA-LLARG 17.11 PC6500-01350 - CASQUELL GIR TIRANTS 27.12 PC6100-01020 - RODA Ø200X50 GRIS 27.13 CASDIAM12X5 - CASQUILLO ØEXT12 ØINT8.1 A 5.5 47.14 PC6170-02110 - BURLETE ALT 27.15 31305061 TUERCA D-985 M-6 CINCADO 27.16 PC2620-02282 - MOLLA FRE VERMELLA 2

04.8 Bill of materials: STANDARD FIXED LEG SET PC-610/7


36

04.9 Standard revolving leg set PC-610/7


37


8.01 PC6500-01161 - CASQUELL GIR POTES POSTERIORS 28.02 3111208161 - TORNILLO D-7984 M-8X16 CINCADO 48.03 3111308701 TORNILLO ISO7380 M8X70 CINCADO 28.04 31305081 TUERCA D-985 M-8 CINCADO 68.05 3111306401 TORNILLO ISO7380 M6X40 CINCADO 28.06 31305061 TUERCA D-985 M-6 CINCADO 28.07 3111208301 - TORNILLO D-7984 M-8X30 CINCADO 48.08 PC6170-01012 - SUBCONJUNT ESTRUCTURA POTES GIRATÒRIES 18.09 PC6500-01200 RODES GIRATÒRIES AMB FRE 28.10 PC6501-01052 - TAPA EXTERIOR POTA POSTERIOR 28.11 PC6500-01082 - SOPORT TIRANT 28.12 PC6500-01091 - TRAVESSER INCLINAT 18.13 PC6500-01261 - CONJUNT VARILLA TRAVESSER POTA 18.14 31305101 - TUERCA D-985 M-10 CINCADOADA 18.15 PC6500-01350 - CASQUELL GIR TIRANTS 28.16 PC6100-01020 - RODA Ø200X50 GRIS 28.17 31203123 ARANDELA D-6798A PARA M12 PAVONADA 28.18 31203081 ARANDELA D-6798A PARA M8 CINCADOADA 88.19 PC2100-02062 - SOPORTE GIRATORIO RUEDA CD-210-DP PINTADO 28.20 PC6500-01302 - SUBCONJUNT TIRANT CURT 18.21 3068 - RODA POSTERIOR 40MM 28.22 TAP-PLASTØ25 - TAPON PLASTICO FINAL Ø25 - MOD. 17-25 48.23 TAP-PLASTØ14 - TAPON PLASTICO FINAL Ø14 - MOD. 17-14 28.24 PC6501-01080 - PATI RODA DAVANTER ALT 28.25 3110212501 - TORNILLO D-912 M-12X50 CINCADO 2

04.9 Bill of materials: STANDARD REVOLVING LEG SET PC-610/7


38

04.10 Inverted fixed leg set PC-610/7


39


9.01 3111208161 - TORNILLO D-7984 M-8X16 CINCADO 49.02 3111308801 TORNILLO ISO7380 M8X80 CINCADO 29.03 PC6170-02012 - SUBCONJUNT POTA FIXE 19.04 31203081 ARANDELA D-6798A PARA M8 CINCADO 49.05 PC6501-02052 - TAPA EXTERIOR POTA DAVANTERA 29.06 PC6500-01082 - SOPORT TIRANT 29.07 PC6500-01091 - TRAVESSER INCLINAT 19.08 PC6500-01261 - CONJUNT VARILLA TRAVESSER POTA 19.09 31305101 - TUERCA D-985 M-10 CINCADO 19.10 PC6500-01302 - SUBCONJUNT TIRANT CURT 19.11 PC6500-01350 - CASQUELL GIR TIRANTS 29.12 PC6100-01020 - RODA Ø200X50 GRIS 29.13 CASDIAM12X5 - CASQUILLO ØEXT12 ØINT8.1 A 5.5 49.14 PC6170-02110 - BURLETE ALT 29.15 31305061 TUERCA D-985 M-6 CINCADO 2

04.10 Bill of materials: INVERTED FIXED LEG SET PC-610/7


40

04.11 Inverted revolving leg set PC-610/7


41


10.01 PC6500-01161 - CASQUELL GIR POTES POSTERIORS 210.02 3111208161 - TORNILLO D-7984 M-8X16 CINCADO 410.03 3111308701 TORNILLO ISO7380 M8X70 CINCADO 210.04 31305081 TUERCA D-985 M-8 CINCADO 610.05 3111306401 TORNILLO ISO7380 M6X40 CINCADO 210.06 31305061 TUERCA D-985 M-6 CINCADO 210.07 3111208301 - TORNILLO D-7984 M-8X30 CINCADO 410.08 PC6170-01012 - SUBCONJUNT ESTRUCTURA POTES GIRATÒRIES 110.09 PC2100-02062 - SOPORTE GIRATORIO RUEDA CD-210-DP PINTADO 210.10 PC6501-01052 - TAPA EXTERIOR POTA POSTERIOR 210.11 PC6500-01082 - SOPORT TIRANT 210.12 PC6500-01091 - TRAVESSER INCLINAT 110.13 PC6500-01261 - CONJUNT VARILLA TRAVESSER POTA 110.14 31305101 - TUERCA D-985 M-10 CINCADOADA 110.15 PC6500-01350 - CASQUELL GIR TIRANTS 210.16 PC6100-01020 - RODA Ø200X50 GRIS 210.17 31203123 ARANDELA D-6798A PARA M12 PAVONADA 210.18 31203081 ARANDELA D-6798A PARA M8 CINCADOADA 810.19 PC2100-02062 - SOPORTE GIRATORIO RUEDA CD-210-DP PINTADO 210.20 PC6170-01062 - SUBCONJUNT TIRANT POTES EXTRA-LLARG 110.21 3068 - RODA POSTERIOR 40MM 210.22 TAP-PLASTØ25 - TAPON PLASTICO FINAL Ø25 - MOD. 17-25 410.23 TAP-PLASTØ14 - TAPON PLASTICO FINAL Ø14 - MOD. 17-14 210.24 PC6501-01080 - PATI RODA DAVANTER ALT 210.25 3110212501 - TORNILLO D-912 M-12X50 CINCADO 2

04.11 Bill of materials: INVERTED REVOLVING LEG SET PC-610/7


42

05 GENERAL MAINTENANCE

CLEANING

It is essential to keep the equipment clean to ensure a proper use and durability of the set. A thorough clean must be done periodically, especially in areas exposed to dirt that may be damaged such as gears, connectors, switches, etc.

Do not use high-pressure cleaning systems, they can damage the product.

CONTROLS AND SELECTORS

Due to the intense and continuous use of mobile ele-ments such as commands and switches, periodically examine its proper operating.

There may be failures in micro-switches and wiring, ins-pect the attachments and the electrical or mechanical connections that may exist.

GREASE

Generally, every moving part should be greased. Our products leave the factory completely greased and lu-bricated. However, it is possible that the elements are degreased over time and the use of the product, either by lubrication loss or dirt. Clean and grease periodica-lly the affected areas according to the manufacturer’s specifications.

Check for loose, missing or worn parts. Perio-dically examine every moving element to make sure that com-ponents are tighten.

WEAR AREAS

Inspecting regularly on the system compo-nents for signs of wear is a preventive measure that can reduce breakdowns. Check possible lubricant leakages, groo-ves or bearing in poor condition.

MECHANICAL FIXING

We generally call mechanical fixing elements to the components used to fix the product as a whole, mainly screws and derivatives.

To some terms of use, due to vibrations or impacts cer-tain elements may lose their tightening torque or fixing properties.

Periodically review that there are no loose elements, especially on moving parts of the set. Please note and always respect the recommended tightening torques.

REPLACEMENT OF COMPONENTS

This manual does not include procedures for all parts. Qualified service personnel should replace cables, swit-ches and certain mecha-nical parts without step-by-step procedures.

The qualified service personnel should contact our commercial department for information about orde-ring spare parts and its installation.

MAKE SURE TO KEEP THESE AREAS FREE OF WATER AND HUMIDITY.TAKE SPECIAL CARE NOT TO WET THEM WHILE WASHING THE SET.


43

06 LEGAL NOTICES

This document may contain technical inaccuracies or typographical errors.

Changes are periodically added to the information herein; these changes will be incorporated in new edi-tions of the publication.

Promeba, S.L. reserves the right to make, if considered appropiate, any modification or improvement to the products described in this publication.

Promeba, S.L. may have patents or patent applications which address themes described in this document. The possession of this document does not entitle no licen-se to these patents.

The information contained in this document does not affect or change the specifications or product warran-ties of Promeba, S.L.

No part of this document shall operate as express or implied license or compensation under the intellectual property rights of Promeba, S.L. or third party.

All the information contained in this document has been obtained in specific environments and it is pre-sented as an illustration. The results obtained in other operating environments may vary.

Promeba, S.L. may use or distribute the information that the client provides in whatever way they see fit, without incurring any obligation with the client.


44

07 PRODUCT WARRANTY

Promeba, S.L. warrants that their products have suc-cessfully passed all quality controls, both functional and material. The warranty period is 2 years from the date of purchase.

This warranty will only be granted when the original invoice or sales receipt (indicating the date of purcha-se, model and the distributor’s name) is presented to-gether with the defective product during the warranty period. Promeba, S.L. reserves the right to not offer the free warranty service if the indicated documents are not presented or if the information provided by the consumer is false, incomplete or illegible.

1. This warranty shall not apply if the model’s name or the serial number has been altered, removed, disappeared or is illegible.

2. This warranty does not cover transportation costs or risks associated with the transport of the product to and from Promeba, S.L.

3. This warranty does not cover any of the following cases:

A. Regular maintenance and reparation or replacement of parts from the normal wear and use.

B. Consumables (components that may need periodic re-placements during the product’s life, such as non-rechar-geable batteries, bulbs, etc.)

C. Damages or defects resulting from the use, operation or improper treatment of the product and not caused by a normal use of it.

D. Damages arising from:

i. Improper use, including:

- Treatment resulting in damages or physical changes, surface or appearance changes of the product.

- Installation, use or storage of the product in a manner inconsistent with the instructions described by Promeba, S.L.

- Product maintenance in a manner inconsistent with the instructions of Promeba, S.L. for a proper maintenance.

- Installation or product use in a manner inconsistent with the technical or security standards of the country where it is used or installed.

ii. Use of components not supplied with the product or incorrect installation of accessory parts previously untested. iii. States or defects of the system in which the product is incorporated with the exception of other products of Promeba, S.L. designed for its use with the product.

iv. Product use with accessories, peripheral units and other products of a type, condition or standard not es-tablished by Promeba, S.L.

v. The manufacturer or distributor shall be solely res-ponsible for determining the sending of parts for its re-paration or the replacement of the product in its enti-rety. In no circumstance shall operators be send to such reparation or product replacement.

Except in the cases mentioned above, Promeba, S.L. shall not give any guarantees in relation to the pro-duct, operation, accuracy, reliability or adaptability for an equipment logical purpose or any other type. If this exception is not lawful or established in the law, Pro-meba, S.L. shall limit or exclude their guarantees only to the extent that the applicable law permits it.

The only obligation of Promeba, S.L. regarding this warranty is to repair or replace the parts subjected to the terms and condition of this warranty.

Promeba, S.L. is not liable for loss or damages to pro-ducts, this warranty or others, including economic loss or not assessable damage; the price paid for the pro-duct; loss of profits, incomes, information, usufruct or use of the product or associated products or indirect loss or damage, accidental or critical.

This clause refers to whether the loss or damage is due to a product deterioration or inoperability associated to defects or unavailability of Promeba, S.L. that cau-sed a downtime, user’s time loss or a business interrup-tion.

In the cases in which the law prohibits or limits these responsibility exclusions, Promeba, S.L. shall exclude or limit their responsibility only to the extent that the law allows. For example, many countries forbid the ex-clusion or limitation of damages caused by negligence, gross negligence, wilful misconduct, fraud and similar acts. The responsibility of Promeba, S.L. in this warran-ty shall not exceed, in any case, the price paid for the product, but if the applicable law permits only respon-sibility limitations of major responsibilities, these shall be applied.

ER-0687/1998

PROMEBA, S.L.

Ctra C-16 Km 59.5 · 08650 Sallent (Barcelona) · SPAINT. 93 837 12 00 · Fax 93 820 61 08

[email protected] · www.promeba.com

All rights reserved. Variations can be done whitout notice.Promeba, S.L. is to be considered not responsible for damages caused by the lack or the wrongness of the information here mentioned.

STRETCHER // PC-610/7promeba.com/wp-content/uploads/2016/04/MANUAL-CAMILLA-PC... · 2018. 11. 28. · 01INTRODUCTION 01.1Useing this manual 05 01.2Technical ... Green, located on

Documents