STRATUMFORCE Ballistic Helmet Polyethylene PASGT / MICH Ballistic Helmet w/ NR1000 Nano-Technology STRATUMFORCE® ballistic helmet are made from specially designed High Performance Polyethylene (HPPE) Uni Directional (UD) materials, which are made using UHMWPE fibers. These are the nextgeneration in lightweight, highperformance protection. STRATUMFORCE® ballistic helmet are designed for maximum comfort, protection and incorporate the latest Nano technology NR1000 for ballistic composite construction. STRATUMFORCE® helmets fully comply with the requirements of MILSTD662F. In addition, they comply with various NIJ Ballistic standards for bullet resistance. They are available in popular PASGT and MICH shapes, enhance the wearer’s aural perception, assist in acquiring a sight picture, and do not interfere with the soldier’s body armor system. Protection level: IIIA according to NIJ standard 0106.01 Table: V50 Performance for Ballistic Helmet, Size Large Helmet lWeight[gr] 700 800 900 1000 Fragment tests done according to MILSTD662F Test Fragments 17 grain / 1.1 gram V50 [m/sec] V50 [ft/sec] 650 700 740 780 2130 2300 2430 2560 9 mm V0=1400±50 ft/sec (430 m/sec) Bullet Resistance 9 mm & 0.44 Mag. NIJ level IIIA NIJ level IIIA Quanticorp 7767 Pine Center Houston, Texas 77095 T: 281- 463-9211 Email: [email protected] New Available September 2012