FENIEX. 2017 INSTRUCTION MANUAL WEB. www.feniex.com Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted Feniex material. Laws in the United States and other countries preserve for Feniex Industries and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Feniex and its licensors contained herein or in the Feniex products described in this Price List may not be copied, reproduced, distributed, merged or modified,transmitted, transcribed, stored in retrieval system or translated into any language or computer language, in any form or by any means, without prior written permission of Feniex Industries, Inc.. Feniex and the stylized Feniex logo are registered in the U.S. Patent & Trademark Office. This instruction manual serves as a guide for the Storm Pro. IMPORTANT! Please read through all provided instructions and any listed warnings in regards to product use. Storm Pro - Instruction Manual V5.1 STORM PRO Model # - C-4014, C-4015 100W 200W
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
FENIE X . 2017 INSTRUCTION MANUALWEB. w w w.feniex.com
Feniex Product Copyrights This price List and the mentioned Feniex products include or describe copyrighted Feniex material. Laws in the United States and other countries preserve for Feniex Industries and its licensors certain exclusive rights for copyrighted material, including the exclusive right to copy, reproduce in any form, distribute and make derivative works of the copyrighted material. Accordingly, any copyrighted material of Feniex and its licensors contained herein or in the Feniex products described in this Price List may not be copied, reproduced, distributed, merged or modified,transmitted, transcribed, stored in retrieval system or translated into any language or computer language, in any form or by any means, without prior written permission of Feniex Industries, Inc.. Feniex and the stylized Feniex logo are registered in the U.S. Patent & Trademark Office.
This instruction manual serves as aguide for the Storm Pro.
IMPORTANT! Please read through all provided instructions and any listed warnings in regards to product use.
Storm Pro - Instruction ManualV5.1
STORM PROModel # - C-4014, C-4015
100W
200W
TM
FENIE X . 2017 INSTRUCTION MANUALWEB. w w w.feniex.com2
Table of Contents
Content Diagram100W 3200W 4
Mounting Instructions100W 5200W 6
Wiring Diagram100W 7200W 8Wiring Explanation 9
List of Tones 10
Warning! Any Storm unit with the below label is not compatible with the 4200 Data link model. Do not connect the RJ45 port on this unit to a 4200 datalink unit
V.5.1
TM
FENIE X . 2017 INSTRUCTION MANUALWEB. w w w.feniex.com3
Content Diagram: 100W
1 Storm Pro 100W Siren System Specification:Input Voltage: 12V DCTemperature Range: -20°C to +50°CMax Current: 10AStand By Current: Less than 30mAPower Output: 100WMain Fuse: 20AFeature 1: Horn RingFeature 2: Park KillFeature 3: Radio RebroadcastFeature 4: 21 Programmable TonesFeature 5: Included MicSpeaker Impedance: 11 OhmOutput Voltage: 35V RMSHousing: AluminumSiren Overload Protection Turn off for 5 seconds then Auto Restart
1
2
V.5.1
TM
FENIE X . 2017 INSTRUCTION MANUALWEB. w w w.feniex.com4
12
1 Storm Pro 200W Siren System Specification:Input Voltage: 12V DCTemperature Range: -20°C to +50°CMax Current: 20AStand By Current: Less than 30mAPower Output: 100W per Speaker, 200W TotalMain Fuse: 30AFeature 1: Horn RingFeature 2: Park KillFeature 3: Radio RebroadcastFeature 4: Dual Tone CapableFeature 5: Dual Tone Delay StartFeature 6: 21 Programmable TonesSpeaker Impedance: 11 OhmOutput Voltage: 35V RMSHousing: AluminumSiren Overload Protection Turn off for 5 seconds then Auto Restart
Content Diagram: 200WV.5.1
TM
FENIE X . 2017 INSTRUCTION MANUALWEB. w w w.feniex.com5
Mounting Instructions:
1.) Place the unit against the intended mounting surface.
2.) Mark the areas where the mounting holes will be drilled. If the mounting surface is part of the vehicle, make sure no vital components could be damaged by the drilling process.
3.) Drill four 4mm mounting holes on the mounting surface, making sure no vital components of the surface are damaged.
4.) Make sure to deburr the holes thoroughly.
2.50
78”
4.0945”
1.9685”
6.96
75”
7.40
06”
5.) Using customer provided screws, secure the Storm Pro to the mounting surface.
Mounting Instructions: 100WV.5.1
TM
FENIE X . 2017 INSTRUCTION MANUALWEB. w w w.feniex.com6
Mounting Instructions: 200W
1.9685”
6.96
75”
7.40
06”
Mounting Instructions:
1.) Place the unit against the intended mounting surface.
2.) Mark the areas where the mounting holes will be drilled. If the mounting surface is part of the vehicle, make sure no vital components could be damaged by the drilling process.
3.) Drill four 4mm mounting holes on the mounting surface, making sure no vital components of the surface are damaged.
4.) Make sure to deburr the holes thoroughly.
5.) Using customer provided screws, secure the Storm Pro to the mounting surface.
2.50
78”
6.6563”
V.5.1
TM
FENIE X . 2017 INSTRUCTION MANUALWEB. w w w.feniex.com7
+-
Wiring Diagram: 100W
BCM
Car Horn
20 Amps
Radio Radio Speaker
Mic
+ 12
V D
C- 1
2 V
DC
Tone
1To
ne 2
To
ne 3
Tone
4H
orn
Ring
+
Park
Kill
+
Broa
dcas
tRa
dio
INRa
dio
IN10
0W S
pkr
100W
Spk
r
USB port not used Data Link Port
Tone select switch
100W 11 ohm speaker
15 ft
on/off switch
12V DC
Body Control Module (BCM)
Overhead or door open light
Connect hereConnect hereConnect here
Connect here
Park Kill and Horn Ring will activate on a + signal from the BCM. Every vehicle's BCM is different in terms of its output signal.
20 Amp fuse
Warning! Any Storm unit with the below label is not compatible with the 4200 Data link model. Do not connect the RJ45 port on this unit to a 4200 datalink unit
V.5.1
TM
FENIE X . 2017 INSTRUCTION MANUALWEB. w w w.feniex.com8
+-
Wiring Diagram: 200W
100W 11 ohm speaker
BCM
Body Control Module (BCM)
12V DC
30 Amp fuse
Car Horn
Connect hereConnect here
Mic
Overhead or door open light
Park Kill and Horn Ring will activate on a + signal from the BCM. Every vehicle's BCM is different in terms of its output signal.
on/off switch
100W 11 ohm speaker
15 ft
USB port not used Data Link port
Tone select switch
+12V
DC
-12
VDC
Tone
1 S
pkr1
Tone
2 S
pkr1
Tone
3 S
pkr1
Tone
4 S
pkr1
Tone
5 S
pkr1
Tone
6 S
pkr1
To
ne 1
Spk
r2To
ne 2
Spk
r2To
ne 3
Spk
r2To
ne 4
Spk
r2To
ne 5
Spk
r2To
ne 6
Spk
r2D
ual D
elay
Dua
l Del
ayH
orn
Ring
+Pa
rk K
ill +
Broa
dcas
tRa
dio
INRa
dio
IN10
0W S
pkr2
100W
Spk
r210
0W S
pkr1
100W
Spk
r1
Radio Radio Speaker
Connect here
Connect here
Warning! Any Storm unit with the Version 1 Storm 100W label (see page 7) is not compatible with the 4200 Data link model. Do not connect the RJ45 port on this unit to a 4200 datalink unit.
V.5.1
TM
FENIE X . 2017 INSTRUCTION MANUALWEB. w w w.feniex.com9
Using Dual DelayDual Delay can be used when both speakers play the same standard siren tone. When Dual Delay is activated, the tones start playing out of sync to create the delay effect. Dual Delay applies only for standard siren tones with Dual Delay capability. Dual Delay does not affect audio tones.
Using Horn RingHorn Ring can be used as a standard vehicle horn or used to quickly switch between two standard siren tones. To use Horn Ring as a vehicle horn, simply do not activate any of the tone inputs. To use Horn Ring for tone switching, activate an input configured to a tone with Horn Ring capability. Momentarily activate the Horn Ring to switch between the configured tone and its alternate tone. Horn Ring does not affect audio tones.
Wiring Explanation
Using Tone Select SwitchTo cycle through tones activate desired port and momentarily press the tone selector switch to cycle to next tone.
Using Park KillPark Kill is used to deactivate any activated standard siren tone. Park Kill does not deac-tivate audio tones. Park Kill port can be connected to your vehicle ocerhead light or door open light so that thesiren is disabled when the door is opened
Using Radio Rebroadcast and MicrophoneWhen either Radio Rebroadcast or the Microphone is activated, any activated tone, stan-dard siren tone or audio tone, gets deactivated.
Configure Tone Alternate ToneWail YelpYelp Fast YelpFast Yelp PhaserPhaser HornHorn MechanicalMechanical PhaserManual Wail High / LowHigh / Low P Call SlowP Call Slow P Call FastP Call Fast PhaserHorn Phaser Horn YelpHorn Yelp Phaser YelpPhaser Yelp Horn PhaserTest Tone Test Tone
Horn Ring Tone Pairs
V.5.1
TM
FENIE X . 2017 INSTRUCTION MANUALWEB. w w w.feniex.com10
List of Tones
Tone Frequency RangeWail 725-1500Yelp 725-1600Fast Yelp 725-1500Phaser 650-1725Horn 600 and 1200Mechanical 770-1370Manual Wail 725-1500High/Low 550 and 750P Call Slow 500-1075P Call Fast 500-1075Horn-Phaser See Horn and PhaserHorn-Yelp See Horn and YelpPhaser-Yelp See Phaser and Yelp
Tone Tone TypeEctosiren SirenBad Boys SongMove Out of the Way Voice CommandPull Over Voice CommandStep Out of the Vehicle Voice CommandStep Out Hands Up Voice CommandRemain in Your Vehicle Voice CommandRemain Window Down Voice Command
List of Current Audio Tones
List of Current Standard Tones
Tone Priority RuleFor a single speaker, an activated tone with a higher input number overrides an activated tone with a lower input number. For example, if Tone 4 and Tone 3 are both activated for Speaker 1, the siren will play Tone 4 for Speaker 1.
V.5.1
Related Documents
