• Thank you for purchasing this product. • Please read this Assembly and Instruction Manual prior to using this product. • File this manual in a safe place for future reference. Storage Bed Small/Single/Semi-Double/Double Assembly, Instruction Manual Retain for future reference Caution Read before Using This Product * Be careful not to damage floors or other furniture when assembling and installing this product. * This product requires two people for installation, moving. * Do not use electric power tools when installing fitting parts. Completed View Parts List Assembly Storage Bed * This Assembly and Instruction Manual applies to all sizes of this product. Illustrations for assembly, instructions represent the Double Size version of this product. * Several holes predrilled for ventilation * Installation holes on back of crosspiece * Handles * No handles Parts List Drawer Unit/Left * Several holes predrilled for ventilation Side Rail Drawer Unit Top Crosspiece For Bottom Board/Open Space For Bottom Board/Drawer Unit Drawer Unit/Right Head/Footboard A Head/Footboard B * Installed on Connection Nut * Installed on Connection Bolt *Installed on bolts * Installed on bolts *Installed on Drawer Units (including two extra pieces) Small X22 Single/Semi-Double/Double X24 (including extra pieces) Bolt/Short Washer Stopper Felt Veneer Stickers Allen Wrench/Large Allen Wrench/Small Bolt/Long Connection Bolt Connection Nut Spring Washer Drawer Remove Lay out tarp/cloth (*not referenced in further steps) First, lay out a tarp or cloth on the floor where you will assemble this product, and install the felt pieces securely to prevent damage to flooring. (Number of felt pieces differ according to product size/type) For details, refer to “Installing Felt” (separate). * For drawer units, first remove Drawer Unit before installing felt pieces in the step below. Pull drawers slightly out from Drawer Units, and then remove Stoppers. After removing Stoppers, you can pull the drawers all the way out. Use Connection Bolts, Connection Nuts, Spring Washers, and Washers in this step (four locations in total). Use Allen Wrench/Small to connect Drawer Units Left/Right. Place Bottom Board for Open Space and Bottom Board for Drawer Units on top of the main unit. * Be sure the Bottom Board fits into the designed slots. The part with handles is the Bottom Board for Open Space. Next, pull drawers out, and install Stoppers. Cover the holes for the joint pins (for Head/Footboard expansion) with the Veneer Stickers to complete the bed. Replace the drawers (removed in step ) in Drawer Units. Use Bolt/Long, Spring Washer, and Washer in this step (eight locations total). Use the Allen Wrench/Large to attach (loosely) Head/Footboard A and B. Use Bolt/Short, Spring Washer, and Washer in this step. Use Allen Wrench/Large to attach metal fittings, and install Side Rail. At the top of the Drawer Unit, use the Allen Wrench/Large to gently tighten Bolt/Long, Spring Washer, and Washer on the Drawer Unit Top Crosspiece. Next, securely tighten Head/Footboard A and B to the Drawer Unit Top Crosspiece. *Predrilled holes for ventilation Washer Spring Washer Bolt/Long Allen Wrench/Large Head/Footboard B Head/Footboard A * Predrilled holes for ventilation Spring Washer Bolt/Short Allen Wrench/Large Washer Metal Fittings Washer Spring Washer Bolt/Long Allen Wrench/ Large Bottom Board for Open Space Bottom Board for Drawer Unit Handles To prevent Bottom Boards from falling, install Bottom Boards so the handles face the interior of the unit. • Bottom Board for Open Space will differ in size according to the size of the bed. Caution Caution Joint pin holes Stick on Install Remove Stopper Open Space Drawer Unit Bottom Board handles Don’t install with handles facing the exterior of the unit. * Read “Cautions” (separate) to ensure proper use of this product. * The joint pin holes won’t be used unless you purchase an extension, sold separately. Veneer Stickers Joint pin holes Caution Hold Connection Nut in place using the Allen Wrench/Small, and turn the Connection Bolt. Drawer Unit Left and Right have different specifications. See the diagram below for proper installation and connection. Allen Wrench /Small Connection Bolt Spring Washer Washer Washer Spring Washer Connection Nut Allen Wrench/Small No gap Gap