StonCor AD Firebarrier

8/11/2019 StonCor AD Firebarrier

1/23

FIREBARRIERSISTEMAS CORTA FUEGOS


2/23

FIREBARRIER

SILICONE SL

INTUMESCENT SEALANT INSERTS OR PUTTY PADSFOR ELECTRICAL BOXES

MORTAR

CPVC/PVC/ABS PLASTIC PIPE

STEEL, IRON & COPPER METALLIC PIPE

MINERAL WOOLMINERAL WOOLSILICONE

ACRYLIC SEALANT ORINTUMESCENT SEALANT

SPRAYACRYLIC

SPRAYACRYLICCOLLAR

FIRESTOP SYSTEMS


3/23

FIREBARRIER

Silicone & Silicone SL

Forms a durable, flexible,water-tight bond

May be applied over a widetemperature range, -18C

to 50C (0F to 120F) Physical properties will

remain stable over time Will not crack or crumble Tools easily SL = self-levels - no

tooling required Neutral cure - low odour Underside of floor

applications tested Colours

Silicone: Red or GreySilicone SL: Red

PlumbingPipes, insulated pipes,glass, copper, steel, ironand combustible (plastic)pipes

ElectricalConduits, cables, cabletrays, bundled cables

DuctsSteel ducts

Joint SystemsHorizontal and vertical(horizontal only for SL)

Joints - Movement Capable

UL 2079 tested

Cartridges10.3 fl.oz. (304 mL)28.7 fl.oz. (850 mL)

Containers2.64 US gal (10 L) pails4.5 US gal (17 L) pails

Foil pack20 fl oz (600 mL)

ULI, ULC, cUL, ITS (WH), FM

IntumescentSealant

Water based, intumescent Economical Forms a durable,

water-tight bond

Physical properties remainstable over time

During a fire expands tofill opening wherecombustible piping waslocated

Tools easily Low odour Ideal for caulk and walk

systems

Colour: Red

PlumbingCopper, steel, ironinsulated, and combustible(plastic) pipes

DuctsSteel ducts

ElectricalCables, cable trays,bundled cables andelectrical conduits


Containers5 US gal (18.9 L) pails

Foil Pack20.3 fl.oz. (600 mL)

ULI, cUL

Acrylic Sealant

Water based Economical Forms a durable, flexible

water-tight bond

Applied by caulking ortrowel


Colour: Red

PlumbingPipes, insulated pipes,copper, steel, andcombustible (plastic) pipes

ElectricalConduits, cables, cabletrays

Joint SystemsHorizontal and vertical

Joints - Movement CapableUL 2079 tested



Foil Pack20.3 fl.oz. (600 mL)

ULI, cUL

PRODUC

TS

FEATURES

USAGE

SIZES

LISTED/

CERTIFIED

FIRESTOP SYSTEMS

A/D FIREBARRIER Silicone, Silicone SL,Seal, Seal NS, Intumescent Caulk or Putty

A/D FIREBARRIER Seal, Seal NS,SprayMastic, Silicone or Silicone SL

A/D Fire Protection Systems

ofrece un sistema completo

de productos requeridos

para sellos corta fuego.

Todos son certificados por

laboratorios independientes

y probados para asegurar

clasificaciones de proteccin

contra fuego en

penetraciones y aberturas en

pisos y paredes con

clasificaciones contra fuego.

A/D FIREBARRIER son

productos listados por

Underwriter Laboratories,

Intertek Testing Services

(Warnock Hersey), y Factory

Mutual, y son certificados

bajo rigurosos programas de

inspecciones a la fbrica.


4/23

Seal & Seal NS

Water based Economical Forms a durable,

water-tight bond

Seal may be poured,pumped or sprayed

Underside of floorapplications tested


ColoursSeal: BlueSeal NS: White (may betinted in the field), and Red

PlumbingPipes, insulated pipes,glass, copper, steel, andCPVC

ElectricalConduits, cables, cabletrays

Joint SystemsHorizontal and vertical


Cartridges(Seal NS only)10.3 fl.oz. (304 mL)28.7 fl.oz. (850 mL)

Containers(Seal & Seal NS)5 US gal (19 L) pails


SprayAcrylic

Water based elastomeric Economical Forms a durable, water

tight bond

Physical properties willremain stable over time

May be sprayed ortrowelled

Curtain wall / floor jointstested

Colour: Red

Joint SystemsHorizontal and vertical,curtain wall, head-of-wall,perimeter and floor to wall



ULI, cUL

Mortar

Foamed cement Single component Easy to use Economical

Mixes easily with water toform a lightweightnon-slumping paste that iseasy to place and tool

Self-supporting Tested for very large

openings Non-combustible

Colour: Grey

PlumbingGlass, copper, steel, iron,insulated pipes and multi-ple penetrations

ElectricalConduits, cables, cabletrays, multiple penetrations

DuctsSteel ducts

Large openings

Containers15.5 lb (7 kg) bags


Mineral Wool

Non-combustible Pre-cut strips facilitate

easy installation andprovide a smooth surface

to help control depth ofsealant that is applied

High quality, proprietaryinsulation blankets/strips

UL and ULC listed andcertified

GeneralA/D FIREBARRIER MineralWool is the recommendedand/or required backing forA/D FIREBARRIER sealantsin most firestopapplications

Packaged 25 lb (11 kg)nominal in plastic bags invarious pre-cut x 4 ft stripsor blankets

ULI, ULC, ITS (WH), FM

A/D FIREBARRIER Intumescent Sealant

A/D FIREBARRIER Acrylic Sealant

A/D FIREBARRIER Silicone & Silicone SL

A/D FIREBARRIER SprayAcrylic

A/D FIREBARRIER Seal & Seal NS

A/D FIREBARRIER Mineral Wool


5/23

Pillows

Quick and clean singleproduct installation

No mesh or lath required No sealant or putty

required Ideal for cable retrofitting Easy to install, remove or

replace

ElectricalCables, cable trays,bundled cables

GeneralBlank or temporaryopenings

2 x 4 x 8 i n .(50 x 100 x 200 mm)packaged 25 per box

ULI, ULC, cUL

Collars, Wrap Strip &Collar Strips

Easy to install withcommon tools

Collars - Convenient, readyto install 3, 4 and 6-in.

nominal trade sizes Wrap Strip - For use with

or without steel Collar Strip Intumescent feature closes

off and seals plastic pipesand pipe insulation

Passes 50 Pa testrequirement in Canada(refer to test designs)

PlumbingCombustible (plastic) pipesand insulated pipesthrough concrete orgypsum wallboard, verticaland horizontal

CollarsNominal 3, 4 and6 in. trade sizes

Wrap Strip1 or 2 in. wide x 1/4 in.thick x 12 ft strips

Collar Strip50 ft coil

ULI, ULC, cUL

Putty

Easy to install Single component Intumescent No mixing

Remains soft and pliable

PlumbingPipes through concretewalls and floors

ElectricalCables and conduitsthrough gypsum wallboard.

Sticks66.2 in3 (1085 mL)packaged 12 per carton

ULI, cUL

Putty Pads & Inserts

Used to maintain hourlyfire resistance ratings offire resistive walls andpartitions containing

electrical boxes Permit greater density of

outlet and switch boxes inrated walls than wouldotherwise be permitted bycodes for unprotectedboxes

Intumescent materialsexpand when exposed tofire to seal off the box

Single component Easy to install

ElectricalProtect electrical outlet andswitch boxes

Inserts2 x 4 in. or 4 x 4 in.packaged 50 per carton

Putty Pads6 x 7 x .2 in. &9.25 x 9.25 x .2 in.packaged 12 per carton

ULI, cUL

A/D FIREBARRIER Mortar

A/D FIREBARRIER Pillows

A/D FIREBARRIER Putty Pads & Inserts

A/D FIREBARRIER Putty

A/D FIREBARRIER Collars

A/D FIREBARRIER Wrap Strip & Collar Strips


6/23

FIREBARRIERINTUMESCENT SEALANT

1. PRODUCT NAMEA/D FIREBARRIER IntumescentSealant.

2. PRODUCT DESCRIPTION

Basic Use:

A/D FIREBARRIERIntumescent Sealant is a single

component intumescent acrylicwater based sealant intended foruse as a firestop systemcomponent.

Composition and Materials:A/D FIREBARRIER IntumescentSealant forms a durable, flexible,watertight bond with mostconstruction materials. It is appliedindependently for caulk and walksystems or over mineral wool or

backer rod (refer to test designdetails) to seal the openings wherebuilding services such as pipes andcables penetrate fire ratedassemblies. May be applied bycaulking gun or trowel. Clean up iswith water.

A/D FIREBARRIER IntumescentSealant contains water and is best ifprotected from freezing.

Packaging : See table 2. Refer tothe A/D FIREBARRIER estimatingguide for complete volume and

coverage information.

Color:Red

Appl ication Limi tat ions:

A/D FIREBARRIER IntumescentSealant is intended for use atinterior locations in buildings only.Protect from direct contact withwater until cured. Curing time willvary with temperature and humidity.

Do not use where abrasion orphysical abuse is anticipated.

Installation in confined or air-free

spaces may inhibit cure.

Do not apply to surfaces withspecial protective or cosmeticcoatings without prior consul-tation with the manufacturer andfirst testing adhesion.

A/D FIREBARRIER IntumescentSealant has been tested innumerous firestop configurations.For optimum economy andperformance, apply to athickness equal to or slightlygreater than the minimum test

design thickness. Excessivedepth to width ratios may causesealant failure DO NOT applyexcessive thickness. As aguideline, A/D Fire ProtectionSystems recommends theminimum tested system thick-nesses not be exceeded by morethan 25%.

3. TECHNICAL DATA

Physical Properties:Refer to Table 1.

Standards: A/D FIREBARRIERIntumescent Sealant has beentested in accordance with thefollowing: ANSI/UL1479, ASTME814 and CAN4/ULC-S115M.Systems certified for use in Canadaare available under the cUL mark.

FGG/BM/CZ System Compatible

indicates that this product has beentested, and is monitored on an

ongoing basis, to assure itschemical compatibility with

FlowGuard Gold, BlazeMaster

and Corzan pipe and fittings.

FGG/BM/CZ, FlowGuard Gold,

BlazeMaster, and Corzan are

licensed trademarks of the LubrizolCorporation.

Contact A/D Fire ProtectionSystems for a current list of firerated systems.

4. INSTALLATIONClean all openings to be firestoppedby removal of foreign matter andcontaminants such as oil, dust,grease, frost, water, surface dirt, oldsealants glazing compound,protective coatings, etc. Refer to firetest design / system.

Priming: A/D FIREBARRIERIntumescent Sealant does not

require any priming. In view of theunpredictability of surfacecharacteristics, it is recommendedthat a test sample of sealant beapplied on the surface to testadhesion.

Masking: Areas adjacent toopenings to be firestopped can bemasked to assure a neatappearance. The masking tapeshould not be allowed to touch theclean surfaces to which the caulk isto adhere. Remove masking tape

immediately.

Appl ications: For caulk and walksystems, simply apply the productwhere required and let cure.Where backer material (mineralwool, backer rod, etc.) is required byfire test design or system, installbacker material as specified.Surfaces of backer material toreceive caulk should be recessed inthe opening to a depth equal to therequired thickness of sealant.

Table 1

PHYSICAL PROPERTIES*

Properties ResultsColor RedOdor MildpH 7.0 - 10.0VOC (grams/liter) 0Flame Spread (ASTM E-84) 0Smoke Developed (ASTM E-84) 0Cure Time (ASTM C-679) 3 - 5 daysSkin over Time OvernightShore A Hardness (ASTM C-661) 15 - 20

Application Temperature 40 - 110F (5 - 43C)Freeze Sensitive YesPaintable Yes

*Values given are not intended for specification preparation.


7/23

Where mineral wool is requiredbacker material, we recommend theuse of A/D FIREBARRIER MineralWool this high quality material is

available pre-cut for easy installationand allows a controlled depth ofcaulk to be applied for maximumeconomy. Apply A/D FIREBARRIERIntumescent Sealant in a continuousoperation to fill and seal theopening. Tool the sealant to spreadit against the backer material andthe opening surfaces.Simply fill the annular space to therequired depth and form a smoothbead or crown at the surfaces.

Excess sealant should be cleanedwith water.CURED SEALANT IS USUALLYVERY DIFFICULT TO REMOVE

WITHOUT ALTERING ORDAMAGING THE SURFACE TOWHICH THE SEALANT HAS BEENMISAPPLIED.

Precaution: On direct contact,uncured sealant may irritate eyes.Flush with water and call aphysician. Avoid prolonged contactwith skin. Keep out of reach ofchildren.

To safely use this product, read andabide by Material Safety Data Sheet(MSDS).

Shelf Life: A/D FIREBARRIERIntumescent Sealant has shelf life ofone year from the date ofmanufacture when stored in originaland unopened container at or below

110F (43C) and above 40F (5C).See top of box or label on pail fordate of manufacture (day/ month/year).

5. AVAILABILITY AND COSTAvailabi li ty: A/D sales offices andtechnical representatives arelocated throughout North America.(See below)

6. MAINTENANCENo maintenance should be required.If intumescent sealant becomesdamaged, replace damaged portion.Clean surfaces in damaged areas,and repair with fresh A/DFIREBARRIER IntumescentSealant.

7. TECHNICAL SERVICESContact nearest A/D representative.

March 10, 2008

Table 2

Type ofPackaging

Size VolumeCoverage at deep x

1 wide

10.1 fl. oz.(300 mL)

18.2 in3

(300 cm3)

6.1 lineal ft.(1.86 lineal m)

Cartridges28.7 fl. oz.

(850 mL)

51.8 in3

(850 cm

3

)

17.3 lineal ft.

(5.27 lineal m)

Foil packs20 fl. oz.(600 mL)

36 in3

(600 cm3)


Pails5 gal

(18.9 L)1155 in

3

(18900 cm3)



8/23

FIREBARRIERINTUMESCENT CAULK

1. PRODUCT NAME

A/D FIREBARRIER IntumescentCaulk.


Basic Use: A/D FIREBARRIERIntumescent Caulk is a waterbased, single componentelastomeric sealant intended foruse as a firestop systemcomponent.

Composition and Materials:A/D FIREBARRIER IntumescentCaulk forms a durable, flexible,watertight bond with mostconstruction materials. It is appliedindependently for caulk and walk

systems or over mineral wool orbacker rod (refer to test designdetails) to seal the openings wherebuilding services such as pipes andcables penetrate fire ratedassemblies. May be applied bycaulking gun or trowel. Clean up iswith water.

A/D FIREBARRIER IntumescentCaulk contains water and is best ifprotected from freezing. If frozen,thaw completely before usePackaging: A/D FIREBARRIERIntumescent Caulk is available in10.3 fl. oz (304 ml) cartridges, 20 fl.oz (600 ml) foil packs and nominal4.5 gal (17 L) plastic pails. Contentsare 18.6 in

3, 36.1 in

3 and 1050 in

3

respectively. Refer to the A/DFIREBARRIER estimate guide forvolume and coverage information.

Color:Red

Application Limitations:

A/D FIREBARRIER IntumescentCaulk is intended for use at interiorlocations in buildings only. Protect

from direct contact with water untilcured. Curing time will vary withtemperature and humidity.


Installation in confined or air-freespaces may inhibit cure.

Do not apply to surfaces withspecial protective or cosmeticcoatings without prior consul-tation with the manufacturer andfirst testing adhesion.

A/D FIREBARRIER IntumescentCaulk has been tested innumerous firestop configurations.For optimum economy andperformance, apply to athickness equal to or slightlygreater than the minimum test

design thickness. Excessivedepth to width ratios may causesealant failure DO NOT applyexcessive thickness. As aguideline, A/D Fire ProtectionSystems recommends theminimum tested system thick-nesses not be exceeded by morethan 25%.

3. TECHNICAL DATA

Physical Properties:Refer to Table 1.

Fire Resistance Ratings: A/DFIREBARRIER Intumescent Caulkhas been tested and certified by ULIand ULC in accordance with ULC-S115, ASTM E814 and

ANSI/UL1479. The following testedfirestop systems were published atthe time of this writing:

ULI System Nos:C-AJ-1343,-1344, -1345, -1365, -1492,-1493, -2464, -5260, -7042

WL-1225, 1235, 1236

F-C-1086, -2195, -2206, -3061and -5051.

ULC Systems Nos:SP961,

-962, -964, -965, -966, -967,

-968, -969, -984, -989, -1001,

-1002, -1003, -1076, -1077,

-1078 and 1079, SPC53, -58,-98, -99 and -100.

Contact A/D Fire ProtectionSystems for a current list of firerated systems.

4. INSTALLATION

Clean all openings to be firestoppedby removal of foreign matter andcontaminants such as oil, dust,grease, frost, water, surface dirt, oldsealants glazing compound,protective coatings, etc. Refer to fire

test design / system.

Priming: A/D FIREBARRIERIntumescent Caulk does not requireany priming. In view of theunpredictability of surfacecharacteristics, it is recommendedthat a test sample of sealant beapplied on the surface to testadhesion.

Masking: Areas adjacent toopenings to be firestopped can bemasked to assure a neat

PHYSICAL PROPERTIES*

Properties ResultsColor RedOdor Mild

UncuredFlow rate (ASTM C920) 175 mL/minVolatile by Volume 35.7%Tack Free Time 30 min. (@ 70F (21C) 50% RH)Specific Gravity 1.25VOC (ASTM D 3960-92) 0.14 lb/gal US (16 g/L)

Cured

Flow, Sag or Slump 0Hardness (A) (ASTM D2240) 35-40Elongation at Break (ASTM D412) 85%Tensile Strength (ASTM D412) 145 psiEffects of Accelerated WeatheringUV Exposure (ASTM C920) No CrackingCold Temperature (ASTM C920) No Cracking

*Values given are not intended for specification preparation.


9/23

May 2004

appearance. The masking tapeshould not be allowed to touch theclean surfaces to which the caulk isto adhere. Remove masking tapeimmediately.

Applications: For caulk and walksystems, simply apply the productwhere required and let cure.

Where backer material (mineralwool, backer rod, etc.) is required byfire test design or system, installbacker material as specified.Surfaces of backer material toreceive caulk should be recessed inthe opening to a depth equal to therequired thickness of sealant.Where mineral wool is requiredbacker material, we recommend theuse of A/D FIREBARRIER MineralWool this high quality material isavailable pre-cut for easy installationand allows a controlled depth of

caulk to be applied for maximumeconomy. Apply A/D FIREBARRIERIntumescent Caulk in a continuousoperation to fill and seal theopening. Tool the caulk to spread it

against the backer material and theopening surfaces.Simply fill the annular space to therequired depth and form a smoothbead or crown at the surfaces.

Excess sealant should be cleanedwith water.CURED SEALANT IS USUALLYVERY DIFFICULT TO REMOVEWITHOUT ALTERING ORDAMAGING THE SURFACE TOWHICH THE SEALANT HAS BEENMISAPPLIED.

Precaution: A/D FIREBARRIERIntumescent Caulk is a water-basedproduct. No acetic acid orobjectionable byproducts areevolved during application. Ondirect contact, uncured caulk mayirritate eyes. Flush with water andcall a physician. Avoid prolongedcontact with skin. Keep out ofreach of children.

To safely use this product, read andabide by Material Safety Data Sheet(MSDS).

Shelf Life: A/D FIREBARRIERIntumescent Caulk has shelf life ofone year from the date ofmanufacture when stored in originaland unopened container at or below

90F (32C) and above 32F (0C).See top of box or label on pail fordate of manufacture (day/ month/year).

5. AVAILABILITY AND COST

Availability: A/D sales offices andtechnical representatives arelocated throughout North America.(See below)

6. MAINTENANCE

No maintenance should be required.If intumescent caulk becomesdamaged, replace damaged portion.Clean surfaces in damaged areas,and repair with fresh A/D

FIREBARRIER Intumescent Caulk.7. TECHNICAL SERVICES

Contact nearest A/D representative.


10/23

FIREBARRIER ACRYLIC SEALANT

1. PRODUCT NAMEA/D FIREBARRIER Acrylic Sealant

2. PRODUCT DESCRIPTIONA/D FIREBARRIER Acrylic Sealant

is a single component, water-basedacrylic sealant intended for use as afirestop system component.

Basic Use: A/D FIREBARRIERAcrylic Sealant is designed foreconomical use in joint and servicepenetration firestop configurations.It forms a durable, flexible,watertight bond with mostconstruction materials. In mostcases, no primer is required. Maybe applied by caulking gun ortrowel. Physical properties will

remain stable over time.Composition and Materials:

A/D FIREBARRIER Acrylic Sealantis designed to tool easily. It is waterbased and must be protected fromfreezing and from water until fullycured. Store and install attemperatures above 40F (5C).

Color:Red

Packaging: See table 2. Refer tothe A/D FIREBARRIER estimatingguide for complete volume andcoverage information.


Do not install when ambienttemperature or temperature ofsubstrate is below 40F (5C).

Protect from freezing and wateruntil sealant is fully cured.

Do not install to surfaces withspecial protective or cosmeticcoatings without prior consul-tation with manufacturer andfirst testing adhesion.

Do not install where abrasion orphysical abuse is anticipated.

For best economy andperformance the product shouldbe applied to a thickness equalto or slightly greater than theminimum test design thickness.

Excessive depth to width ratiosmay cause sealant failure donot apply excessive thick-ness. As a guideline, werecommend that the minimumtest system thicknesses not beexceeded by more than 25%.

Standards: A/D FIREBARRIERAcrylic Sealant has been tested inaccordance with the following:

ANSI/UL1479, ANSI/UL 2079,ASTM E814 and CAN/ULC-S115M.

3. TECHNICAL DATAA/D FIREBARRIER Acrylic Sealantis listed by ULI. For details of ratedfirestop systems see ULI s FireResistance Directory, Volume 2.Systems certified for use in Canadaare available under the cUL mark.

4. INSTALLATIONClean all openings to be firestoppedby removal of foreign matter andcontaminants such as oil, dust,grease, frost, water, surface dirt, oldsealants, glazing compounds,protective coatings etc. Cleaning ofall surfaces should be done on thesame day in which the sealant isapplied.

Priming: A/D FIREBARRIERAcrylic Sealant does not require

priming. In view of theunpredictability of surfacecharacteristics, it is recommendedthat a test sample of sealant beapplied on the surface to testadhesion.

Masking: Areas adjacent toopenings to be firestopped can be

masked to assure a neatappearance. The masking tapeshould not be allowed to touch theclean surface to which the sealant is

to adhere. Remove masking tapeimmediately.Install backup materials asspecified. Excess sealant should bewiped from glass, metal and plasticsurfaces while uncured. Clean up iswith water.CURED SEALANT IS USUALLYVERY DIFFICULT TO REMOVEWITHOUT ALTERING OR DAM-

AGING THE SURFACE TO WHICHTHE SEALANT HAS BEEN

APPLIED.Precaution: May cause irritation.May be harmful if swallowed. Avoidgetting in eyes. Wash handsthoroughly after handling. Use onlyas directed.Keep out of reach of children.To safely use this product, read andabide by Material Safety Data Sheet(MSDS).

Shelf Life:When stored at or below110F (43C) and above 40F (5C),

A/D FIREBARRIER Acrylic Sealant

has a shelf life of one year fromdate of manufacture.Note:Protect from freezing.

Table 1 PHYSICAL PROPERTIES*

Color Red

pH 7.0 - 9.0VOC (grams/liter): 65

Flame Spread (ASTM E84) 15

Smoke Developed (ASTM E84) 0

Cure Time 3 - 5 days

Skin over Time Overnight

Movement Capability: (UL 2079; class I, II, III) + 25 %, maximum

Shore A Hardness (ASTM C-661) 15 - 20

Application Temperature 40 - 110F (5 - 43C)

Freeze Sensitive Yes

Paintable Yes

*Values given above are not intended for specification preparation.


11/23

5. AVAILABILITY AND COSTAvailability: A/D sales offices andtechnical representatives arelocated throughout North America.(See below)

6. MAINTENANCE

No maintenance should be required.If sealant becomes damaged,replace damaged portion. Cleansurfaces in damaged area andrepair with fresh A/D FIREBARRIER

Acrylic Sealant. Damage by othertrades should be patched at theexpense of trade causing damage.

7. TECHNICAL SERVICESContact nearest A/D office.

June 25, 2007

Table 2

Type ofPackaging

Size VolumeCoverage at deep x

1 wide

10.1 fl. oz.(300 mL)

18.2 in3

(300 cm3)


Cartridges28.7 fl. oz.

(850 mL)

51.8 in3

(850 cm3)

17.3 lineal ft.

(5.27 lineal m)

Foil packs20 fl. oz.(600 mL)

36 in3

(600 cm3)


Pails5 gal

(18.9 L)1155 in

3

(18900 cm3)



12/23

FIREBARRIER SILICONE1. PRODUCT NAME

A/D FIREBARRIER Silicone

2. PRODUCT DESCRIPTIONA primerless single component

silicone sealant. The sealantcures to a durable, flexible,silicone rubber when exposed toatmospheric moisture.

Basic Use: A/D FIREBARRIERSilicone is designed foreconomical use in joint andservice penetration firestopconfigurations. It forms a durable,flexible, watertight bond with mostconstruction materials. In mostcases, no primer is required.

Composition and Materials:A/D FIREBARRIER Silicone isdesigned to tool easily. Its'physical properties will remainstable over time. It may beapplied over a wide temperaturerange, 0F to 120F (-18C to50C), allowing the sealant to beapplied in any season.

Packaging: A/D FIREBARRIERSilicone is available in nominal10.3 fl. oz. (304 mL) and 28.7 fl.oz. (850 mL) cartridges, 20 fl. oz

(600 mL) foil packs and 2.64 USgallon (10L) and 4.5 US gallon(17L) bulk containers. Contentsare 18.6 in

3, 49 in

3, 36.1 in

3, 634

in3 and 1050 in

3 respectively.

Refer to the A/D FIREBARRIERestimate guide for volume andcoverage information.

Color:Red or Grey*(*Note: requires special order)

Appl ication Limi tat ions:

Do not use where abrasion or

physical abuse is anticipated. Installation in confined or air-

free spaces may inhibit cure.

Silicones may be painted, butmovement of the silicone maycause the paint film to crackand peel. We recommend thesealant be applied afterpainting is completed.

Do not apply to surfaces thatwill be in direct contact withfood.

Do not apply to surfaces withspecial protective or cosmeticcoatings without prior consul-tation of the manufacturerand first testing adhesion.

For optimum economy andperformance the productshould be applied to a

thickness equal to or slightlygreater than the minimum testdesign thickness.

Excessive depth to widthratios may cause sealantfailure Do not applyexcessive thickness. As aguideline, A/D Fire ProtectionSystems recommends thatthe minimum test systemthicknesses not be exceededby more than 25%.

Standards:A/D FIREBARRIER

Silicone has been tested inaccordance with the following:ULC-S115, Standard Method ofFire Tests of Firestop Systems.

ASTM E814-83, StandardMethod of Fire Tests of Through-Penetration Fire Stops

ANSI/ULC 2079, Tests for FireResistance of Building JointSystems.

FGG/BM/CZ System

Compatible indicates that this

product has been tested, and ismonitored on an ongoing basis, toassure its chemical compatibility

with FlowGuard Gold,

BlazeMasterand Corzanpipe

and fittings. FGG/BM/CZ,

FlowGuard Gold,

BlazeMaster, and Corzanarelicensed trademarks of theLubrizol Corporation.

3. TECHNICAL DATAA/D FIREBARRIER Siliconesealant remains flexibleindefinitely between temperaturesof -50F and 300F (-45 and149C). It will not crack orcrumble.

A/D FIREBARRIER Siliconeconforms to the requirements of

ASTM C 920 for Elastomeric jointsealants, Type S, Grade NS,class 25, use NT, G, A and M.

A/D FIREBARRIER Silicone islisted by ULC, ULI, ITS (WarnockHersey) and Factory Mutual.For details of rated firestopsystems see ULCs List ofEquipment and Materials, Fire-stop System and Components,ULIs Fire Resistance Directory,Volume 2, ITS' s Listings Book

PHYSICAL PROPERTIES

Properties Results

UncuredTool/Work Time 5 minutesSkin Over Time @ 25C (77F) Less than 60 minutes @ 50% RHCuring Time @ 25C (77F) 48 hours @ 50% RHFlow, Sag or Slump NilSpecific Gravity 1.13Maximum strength After 21 daysVOC (ASTM D 3960-92) Less than 0.69 lb/gal US

Cured 7 days @ 25C (77F) 50% RH.Hardness (A) (ASTM D2240) 12Tear Strength (ASTM D624, Die B) 3.5 kN/m (20 ppi)Elongation at Break (ASTM D412) 600%

Shrink Factor NegligibleASTM C 920 Type S, NS, 25, NT, G, A & M

*Values given above are not intended to be used in specification preparation.


13/23

August 2008

and Factory Mutual s ApprovalGuide.

4. INSTALLATIONClean all openings to befirestopped by removal of foreignmatter and contaminants such asoil, dust, grease, frost, water,surface dirt, old sealants glazingcompound, protective coatings,

etc.

Priming: A/D FIREBARRIERSilicone generally does notrequire priming. In view of theunpredictability of surfacecharacteristics, it is recommendedthat a test sample of sealant beapplied on the surface to testadhesion.


appearance. The masking tapeshould not be allowed to touchthe clean surfaces to which thesilicone is to adhere. Removemasking tape immediately.

A/D FIREBARRIER Mineral Woolis the required backup material inmost systems. The materialallows a controlled depth ofsealant to be applied formaximum economy.

Install backup material asspecified. Surfaces of mineralwool to receive sealant should berecessed in the opening to adepth equal to the required thick-ness of sealant. Apply A/DFIREBARRIER Silicone in acontinuous operation to fill andseal the opening. Tool thesealant to spread it against thebackup material and the openingsurfaces.

Individual penetrations throughdrywall may not require a backingmaterial for the silicone. Simplyfill the annular space to therequired depth and form a smoothbead or crown at the surfaces.

Excess sealant should be dry-wiped from glass, metal andplastic surfaces while stilluncured, followed with acommercial solvent such as xylol,toluol, or methyl ethyl ketone.

CURED SEALANT IS USUALLYVERY DIFFICULT TO REMOVEWITHOUT ALTERING ORDAMAGING THE SURFACE TOWHICH THE SEALANT HASBEEN MISAPPLIED.

Precaution: On direct contact,uncured sealant may irritate eyes.Flush with water and call a

physician. Avoid prolongedcontact with skin. Keep out ofreach of children.To safely use this product, readand abide by Material Safety DataSheet (MSDS). Provide adequateventilaion.

Shelf Life: When stored inoriginal and unopened container

at or below 32C (90F), A/DFIREBARRIER Silicone has ashelf life of one year from date ofmanufacture.

5. AVAILABILITY AND COSTAvailabi li ty: A/D sales officesand technical representatives arelocated throughout North

America. (See below)

6. MAINTENANCENo maintenance should berequired. If silicone sealantbecomes damaged, replace dam-aged portion. Clean surfaces indamaged areas, and repair withfresh A/D FIREBARRIERSilicone.

7. TECHNICAL SERVICESContact nearest A/Drepresentative.


14/23

FIREBARRIER SILICONE SL1. PRODUCT NAME

A/D FIREBARRIER Silicone SL

2. PRODUCT DESCRIPTIONBasic Use: A primerless single

component self-leveling siliconesealant. It cures to a durable,flexible, silicone rubber whenexposed to atmospheric moisture. Itis designed for economical use in

joint and service penetration firestopconfigurations. It forms a durable,flexible, watertight bond with mostconstruction materials. In mostcases, no primer is required.

Composition and Materials:A/D FIREBARRIER Silicone SL isdesigned to self-level. No tooling is

required. Physical properties willremain stable over time. It may beapplied over a wide temperaturerange, 0F to 120F (-18C to 50C),allowing the sealant to be applied inany season.

Packaging: A/D FIREBARRIERSilicone SL is available in nominal10.3 fl. oz. (304 mL) and 28.7 fl. oz.(850 mL) cartridges, 20 fl. oz (600mL) foil packs and 2.64 US gallon(10L) and 4.5 US gallon (17L) bulkcontainers. Contents are 18.6 in

3, 49

in3, 36.1 in3, 634 in3 and 1050 in3respectively. Refer to the A/DFIREBARRIER estimate guide forvolume and coverage information.

Color:Red

Appl ication Limitat ions:


Installation in confined or air-freespaces may inhibit cure.

Silicones may be painted, but

movement of the silicone maycause the paint film to crack andpeel. We recommend thesealant be applied after paintingis completed.

A/D FIREBARRIER Silicone SLis self-leveling and is thereforelimited to horizontal applications.

Do not apply to surfaces withspecial protective or cosmeticcoatings without prior consul-tation of the manufacturer andfirst testing adhesion.

Do not apply to surfaces that willbe in direct contact with food.

For optimum economy andperformance the product shouldbe applied to a thickness equalto or slightly greater than theminimum test design thickness.

Excessive depth to width ratiosmay cause sealant failure. Donot apply excessive thick-ness. As a guideline, A/D FireProtection Systems recom-mends the minimum testedsystem thicknesses not beexceeded by more than 25%.

Standards: A/D FIREBARRIERSilicone SL has been tested inaccordance with the following:ULC-S115, Standard Method ofFire Tests of Firestop Systems.

ASTM E814-83, Standard Methodof Fire Tests of Through-PenetrationFire Stops.

ANSI/UL 2079, Tests for FireResistance of Building JointSystems.

FGG/BM/CZ System Compatible

indicates that this product has beentested, and is monitored on anongoing basis, to assure itschemical compatibility with

FlowGuard Gold, BlazeMaster

and Corzan pipe and fittings.

FGG/BM/CZ, FlowGuard Gold,

BlazeMaster, and Corzan are

licensed trademarks of the LubrizolCorporation.

3. TECHNICAL DATAA/D FIREBARRIER Silicone SL

sealant remains flexible indefinitelybetween temperatures of -50F and300F (-45C to 149C). It will notcrack or crumble.

A/D FIREBARRIER Silicone SL islisted by ULC, ULI, ITS and FM. Fordetails of rated firestop systems seeULIs Fire Resistance Directory,Volume 2, ULCs List of Equipmentand Materials, Firestop Systems andComponents, ITS's Listings Bookand FMs Approval Guide.

Contact A/D Fire Protection Systemsfor a current list of tested systems.

4. INSTALLATIONClean all openings to be firestoppedby removal of foreign matter andcontaminants such as oil, dust,grease, frost, water, surface dirt, oldsealants, glazing compound,protective coatings, etc.

Priming: A/D FIREBARRIERSilicone SL generally does notrequire priming. In view of the

PHYSICAL PROPERTIES

Properties Results

UncuredColor RedSkin Over Time @ 25C (77F) 75 minutesCuring Time @ 25C (77F) 48 hoursFlow, Sag or Slump Self-levelingSpecific Gravity 1.15VOC (ASTM D 3960-92) < 0.50 lb/gal US (59.9 g/L)

Cured(21 days @ 25C (77F) 50% RH)Color RedHardness (A) (ASTM D2240) 5Elongation at Break (ASTM D412) 600%Movement Capability (ASTM C719) +100/-50 %

Tensile strength (ASTM D412) 98.5 kg/cm2

(140 psi)Adhesion in peel (ASTM C794) 15.7 lbs. (180 , 2 in. per min.,

mortar, cohesive failure)



15/23

August 2008

unpredictability of surface charac-teristics, it is recommended that atest sample of sealant be applied onthe surface to test adhesion.

Masking: Areas adjacent toopenings to be firestopped can bemasked to assure a neatappearance. The masking tape

should not be allowed to touch theclean surfaces to which the siliconeis to adhere. Remove masking tapeimmediately.

A/D FIREBARRIER Mineral Wool isthe required backer material in mosttested systems. The material allowsa controlled depth of sealant to beapplied for maximum economy.

Install backer material as specified.Surfaces of mineral wool to receivesealant should be recessed in theopening to a depth equal to the

required thickness of sealant. ApplyA/D FIREBARRIER Silicone SL in

sufficient quantity to fill and seal theopening to the specified depth. It isself-leveling and therefore no toolingis required.

Excess sealant should be dry-wipedfrom glass, metal and plasticsurfaces while still uncured, followedwith a commercial solvent such asxylol, toluol, or methyl ethyl ketone.

Cured sealant may be very difficultto remove without altering ordamaging the surface to which thesealant has been misapplied.

Precaution: On direct contact,uncured sealant may irritate eyes.Flush with water and call aphysician. Avoid prolonged contactwith skin. Keep out of reach ofchildren.To safely use this product, read andabide by Material Safety Data Sheet

(MSDS). Provide adequateventilation

Shelf Life: When stored in originaland unopened container at or below90F (32C), A/D FIREBARRIERSilicone SL has a shelf life of oneyear from date of manufacture.

5. AVAILABILITY AND COSTAvailabi li ty: A/D sales offices andtechnical representatives are located

throughout North America. (Seebelow)

6. MAINTENANCENo maintenance should be required.If silicone sealant becomesdamaged, replace damaged portion.Clean surfaces in damaged areas,and repair with fresh A/DFIREBARRIER Silicone SL.

7. TECHNICAL SERVICESContact nearest A/D representative.


16/23

FIREBARRIER SPRAYACRYLIC1. PRODUCT NAME

A/D FIREBARRIER SprayAcrylic

2. PRODUCT DESCRIPTIONA/D FIREBARRIER SprayAcrylic isa single component, water-basedelastomeric that cures to a durable,

flexible, fire resistant seal.Basic Use: A/D FIREBARRIERSprayAcrylic is designed for use asa firestop sealant in joint firestopconfigurations including head-of-wall, curtain wall, perimeter andfloor to wall construction joints.

Composition and Materials:A/D FIREBARRIER SprayAcrylic iswater-based. It is designed for sprayand trowel application to vertical andhorizontal surfaces. It forms durable,flexible, watertight bonds with most

materials. Physical properties willremain stable over time. Productcontains mold growth inhibiters.

A/D FIREBARRIER SprayAcryliccontains water and is best ifprotected from freezing. If frozen,thaw completely before use. Store,transport and install at temperaturesabove 40F (5C).

Packaging: A/D FIREBARRIERSprayAcrylic is available in 5 USgallon (18.9 L) pails. Coverage perpail is approximately 67 ft

2 (6.3 m

2)

at 1/8-in. (3 mm) wet thickness.

Color:Red

Appl ication Limitat ions: Do not install when ambienttemperature or temperature ofsubstrate is below 40F (5C). Protect from freezing and water

until sealant is fully cured. Do not apply to surfaces with

special protective or cosmeticcoatings without first testingadhesion and prior consultationwith manufacturer.

Not intended for immersion orcontinuous exposure to water.

Do not install on hot surfacesabove 200F (90C).

A/D FIREBARRIER SprayAcrylichas been tested in numerousfirestop joint firestop systems.For optimum economy andperformance, the product shouldbe applied to a thickness equal toor slightly greater than the

required minimum test designthickness. Excessive depth towidth ratios may cause sealant

failure do not apply excessivethickness. As a guideline, werecommend that the minimumtest system thicknesses not beexceeded by more than 25%.

3. TECHNICAL DATAStandards: A/D FIREBARRIERSprayAcrylic has been tested and inaccordance with the following:

ANSI/UL1479, ANSI/UL2079, ASTME814 and CAN4/ULC-S115M.For details of rated firestop systemssee UL s Fire Resistance Directory,Volume 2. Systems certified for usein Canada are available under thecUL mark.

Surface Burning Characteristics:(ASTM E84 )Flame Spread: 15Smoke Developed: 0

4. INSTALLATIONNo dilution or mixing is required foruse. Clean all openings to befirestopped by removal of foreignmatter and contaminants such as

oil, dust, grease, frost, water,surface dirt, old sealants, glazingcompounds, protective coatings,etc.

Priming: Generally, a primer willnot be required. It is recommendedthat a test sample of sealant beapplied on the surface to testadhesion.

Masking: Surfaces adjacent toopenings to be firestopped can bemasked to assure a neat

appearance. The masking tapeshould not be allowed to touch theclean surface to which the sealant is

to adhere. Remove masking tapeimmediately.

Forming/Backing: Install forming /backing material as specified by thetested firestop system. Unlessotherwise specified, A/D FIREBAR-RIER Mineral Wool is therecommended backup material.

Appl ication: A/D FIREBARRIERSprayAcrylic may be applied byspray or trowel to vertical andhorizontal surfaces.

Refer to tested firestop system forminimum wet film thickness that isrequired - usually 1/8 (3.2 mm).Use a wet film gauge to measurewet film thickness. Apply A/DFIREBARRIER SprayAcrylic so asto seal the mineral wool backer withthe required thickness and overlapadjacent surfaces a minimum of in. (13 mm) or as otherwisespecified in tested firestop system.Excess sealant should be wipedfrom glass, metal and plasticsurfaces while uncured. Clean upwith water. Follow equipmentmanufacturers instructions for cleanup and use. Protect adjacentsurfaces from overspray andunintended contact - Cured SealantMay Be Very Difficult To RemoveWithout Altering Or DamagingThe Surface To Which TheSealant Has Been Applied.

Table 1 PHYSICAL PROPERTIES*

Color Red

pH 7.0 - 9.0

VOC (grams/liter): 65

Flame Spread (ASTM E84) 15

Smoke Development (ASTM E84) 0

Cure Time 3 - 5 days

Skin over Time Overnight

Movement Capability: (UL 2079; class I, II, III) + 25 %, maximum

Shore A Hardness (ASTM C-661) 15 - 20

Application Temperature 40 - 110F (5 - 43C)

Freeze Sensitive Yes

Paintable Yes



17/23

Precautions: May cause irritation.May be harmful if swallowed. Avoidcontact with eyes. Wash handsthoroughly after handling. Use onlyas directed. Keep out of reach of

children. To safely use this product,read and abide by Material SafetyData Sheet (MSDS).

Shelf Life: A/D FIREBARRIERSprayAcrylic has a shelf life of 1

year from the date of manufacturewhen stored in original andunopened container below 110F

(43C) and above 40F (5C).

5. MAINTENANCE

No maintenance should be required.If product becomes damaged, rep-

lace with new A/D FIREBARRIERSprayAcrylic. All surfaces should beclean and free of any material thatwould prevent adhesion.

6. AVAILABILITY AND COST

Availabi li ty:A/D sales offices andtechnical representatives arelocated throughout North America.(See below).

7. TECHNICAL SERVICES

Contact nearest A/D office orrepresentative

June 25, 2007

Table 2 Quick Reference Guide Spray Application of SprayAcrylic

Hoses 50 ft of 1/4 in. (I.D.) Blue Max

Whip line 6 ft - (I.D.) whip line with swivel

Tips419 - 423 heavy-duty self cleaning reversible type621 - 625 heavy-duty self cleaning reversible type

Spray machineAirless sprayer capable of 3300psi pressure and min.

delivery of 0.95 gpm without surging

Filters 60-80 mesh in gun & 60-80 in manifold

Mixing Heavy-duty drill with paddle for 30 seconds

Application Rate 1/8 in. (3 mm) wet

Finish Follows profile of backer material

Trowel May be toweled

Clean-up Water


18/23

FIREBARRIERMORTAR

1. PRODUCT NAMEA/D FIREBARRIER Mortar


A non-combustible fiber reinforced,foamed cement mortar.

Basic Use: A/D FIREBARRIERMortar is intended to provide non-combustible and tight fittingfirestops at openings andpenetrations through fire-rated walland floor assemblies. A/DFIREBARRIER Mortar powdermixes easily with water to form amousse or shaving cream-like non-slumping paste. This featurepermits easy installation with a

minimum of damming. Whencured, A/D FIREBARRIER Mortaris self-supporting and thereforemay be used for large openingswhere other firestopping materialsare impractical.

Composition and Materials:A/D FIREBARRIER Mortar mixesand trowels easily. Tools arecleaned with water. A/DFIREBARRIER Mortar requires andcontains no solvents. It iscomprised of materials of low

toxicity. Dust protection is recom-mended see INSTALLATION.

Color: A distinctive charcoal (darkgrey).

Packaging: A/D FIREBARRIER

Mortar is packaged in 15.5 lb. (7kg) bags. A 275 mL measuring cupis provided in each bag of productfor convenience. One bag will yieldapproximately 850 in.

3 (13,930cm

3)

- approximately enough for a 1 x 2ft. (305 x 610 mm) opening at an

installed depth of 3 in. (75 mm).Note: Ignores volume occupied bypenetrating items. Yield calculationis based on product mixed inaccordance with our installationinstructions.

Application Limitations:Do not install when temperature isbelow 40F (5C). In horizontal applications, inter-mediate support may be required.Do not permit pedestrian or othertraffic.

Where A/D FIREBARRIER Mortarwill be subject to acidic exposure,like other Portland cement-basedproducts it may require a protectivecoating.

3. TECHNICAL DATAPhysical Properties: Refer toTable 1.Fire Resistance Ratings: A/DFIREBARRIER Mortar has beentested and certified by ULI, ULC,ITS and FM in accordance with

ANSI / UL 1479, ASTM E814 andULC-S115-95. For details of ratedfirestop systems see ULIs FireResistance Directory, Volume 2,ULCs List of Equipment andMaterials, Firestop Systems andComponents, ITS' s Listing Bookand Factory Mutual s ApprovalGuide. Current systems include:ULI:CAJ-1126, -1128, -1195, -1196, -2249, -5095, -7029, -7030, -8029 and WL-8005.ULC:SP196, -229, -230, -326, -341, -396, -422, -423, -424, -758, -765 and -767.

FM:91, 92, 94 and 205

ITS:AD/PHV 180-01, -02 and -03.

4. INSTALLATIONClean openings to be fire-stoppedby removal of foreign matter andcontaminants such as oil, dust,grease, frost, water, dirt, oldsealants or glazing compounds,protective coatings, originalformwork, etc.

Priming: Surfaces to receive A/DFIREBARRIER Mortar generally donot require priming.

Keying: For large horizontalopenings, it is recommended that

A/D FIREBARRIER Mortar bemechanically keyed into theconcrete surround and/or thatintermediate support be provided.Mixing:A/D FIREBARRIER Mortar

is mixed with water in the ratio of2.6 quarts US (2.5 L) of water toeach 15.5 lb. (7 kg) bag. An emptymilk container makes a convenientmeasuring device for water at the

job site. A measuring cup issupplied in each bag forconvenience when mixing less thana full bag. Portion water and Mortarpowder in accordance with Table 2.

Forming or Damming:Horizontal openings may bedammed temporarily with any

Table 1 - PHYSICAL PROPERTIES

Properties Results

Before CuringMix Time 1.5 to 5 min.

Pot Life 50 min. (max.)

Workability Excellent

Wet Density 43.7 + 0.6 pcf (700+10 kg/m)

Set Time 10 to 15 hr.

After Curing

Density 40 + 2.5 pcf (640 + 40 kg/m)

Compressive Strength (28 days) 478 + 44 psi (3.3 + 0.3 MPa)

Shrinkage None

Noncombustibility (ASTM E136) Noncombustible

Noncombustibility (CAN4-S114) Noncombustible

Thermal Conductivity (ASTM C-518)0.197 W/m.K @ 24C

(1.365 Btu. in/ft.h.F)

*Values given are not intended to be used in specification preparation.


19/23

October 2004

convenient material (i.e. plywood,polystyrene insulation boards, wiremesh, etc.). Damming is generallynot required for vertical openingsdue to the low slump, dimensionalstability and cohesive strength ofthe mortar paste. Forms, if used,may be removed after 24 hours.

Placement: Apply A/D FIRE-BARRIER Mortar paste intoopening with trowel, or pour intolarge horizontal openings frommixer or mixing container. Workpaste with trowel to ensure that allvoids are filled. Give particularattention to voids between multi-cable/pipe installations. Productmay be vibrated for this purpose.Tool surface to desired finish.Clean up with water.

Re-Penetration: Should it become

necessary to penetrate cured A/DFIREBARRIER Mortar for new oradditional building services (i.e.cables or pipes), simply drill or pokethrough mortar to provide openingof sufficient size. After installationof new penetrating item(s), firestopremaining voids with fresh A/DFIREBARRIER Mortar or with A/DFIREBARRIER Mineral Wool andSilicone where permitted by firetested system.

Precaution: Avoid inhalation of

dust or contact with eyes. Use ofdust mask and eye protection isrecommended. Thoroughly wash

skin after contact and before eating,etc.To safely use this product, read andabide by Material Safety DataSheet (MSDS).

5. AVAILABILITY AND COSTAvailability: A/D sales offices andtechnical representatives are

located throughout North America.(See below)

6. MAINTENANCENo maintenance should berequired. If mortar becomes dam-aged replace damaged portion.Damage by other trades should bepatched at the expense of tradecausing damage.


A/D FIRE PROTECTION SYSTEMS

Table 2

A/D FIREBARRIER Mortar Powder Water

Full bag, 7 kg (15.5 lb.) 2.5 L (9 cups*)

(2.6 quarts US)

bag (32 cups*) 1.875 L (6 cups*)

(2 quarts US)

bag (21 cups*) 1.25 L (4 cups*)(1.3 quarts US)

bag (10 cups*) 0.625 (2 cups*)

(0.7 quarts US)

*Note: Refers to 275 mL cup supplied in bag. Use clean potable water.Add mortar powder to water in mixer or mixing container. Mix until themortar paste takes on a consistent mousse-like or shaving cream-liketexture. DO NOT ADD MORE WATER continue to mix until mixturewets out. Mixing time will depend on method used - 1 to 3 minutes formortar mixer, 3 to 5 minutes with electric hand-held mixer. Hand mixingmay take longer.

NOTE: DO NOT ADD MORE WATER. IT IS NORMAL FOR MIX TOAPPEAR QUITE DRY AT FIRST. CONTINUE TO MIX.


20/23

FIREBARRIERSEAL and SEAL NS

1. PRODUCT NAMEA/D FIREBARRIER Seal andSeal NS


Single component, water basedelastomeric sealants intended foruse as firestop system components.

Basic Use: A/D FIREBARRIERSeal and Seal NS are designed foreconomical use in joint and servicepenetration firestop configurations.They form durable, flexible,watertight bonds with mostconstruction materials. In mostcases, no primer is required.Physical properties will remainstable over time.

Composition and Materials:A/D FIREBARRIER Seal may bepumped or poured into the opening.

A/D FIREBARRIER Seal NS (non-slumping) is designed for trowel andspray applications.

A/D FIREBARRIER Seal and SealNS contain water and must beprotected from freezing and fromwater until fully cured. Store,transport and install at temperaturesabove 40F (5C).Colors:A/D FIREBARRIER Seal isblue in color. Seal NS is available inwhite or red please specify whenordering. The white version of SealNS in 5 gal (18.9 L) pails may betinted in the field with a variety ofcolor tint pastes. Refer to Seal NSTintingdata sheet.Packaging: A/D FIREBARRIERSeal and Seal NS are available in 5US gallon (18.9 L) pails. Theoreticalcoverage per pail is 40 ft

2(3.8 m

2) at

an applied wet film thickness of 0.2in. (5 mm) and approximately 64 ft

2

(5.7 m2) at 1/8-in. (3 mm) wetthickness. Seal NS is also availablein 10.3 fl. oz. (304mL) and 28.7 fl.oz. (850 mL) tubes.


Do not install when ambienttemperature or temperature ofsubstrate is below 40F (5C).

Protect from freezing and wateruntil sealant is fully cured.

Do not install to surfaces withspecial protective or cosmetic

coatings without prior consul-tation with manufacturer andfirst testing adhesion.

Do not install where directcontact with food will occur.

Do not install where abrasion orphysical abuse is anticipated.

Seal is intended for horizontalapplications only. Seal NS canbe used for vertical andhorizontal applications.

Seal and Seal NS have beentested in numerous firestop joint

and through-penetration firestopsystems. For best economy andperformance the product shouldbe applied to a thickness equalto or slightly greater than theminimum test design thickness.Excessive depth to width ratiosmay cause sealant failure donot apply excessive thick-ness. As a guideline, werecommend that the minimum

test system thicknesses not beexceeded by more than 25%.

Standards: A/D FIREBARRIERSeal and Seal NS have been firetested in accordance with thefollowing: ULC-S115-M, StandardMethod of Fire Tests of FirestopSystems, ASTM E814-83 and

ANSI/UL 1479, Standard Method ofFire Tests of Through - PenetrationFire Stops and ANSI/UL 2079,"Tests for Fire Resistance ofBuilding Joint Systems."

3. TECHNICAL DATAA/D FIREBARRIER Seal and Seal

NS are listed by ULC, ULI, ITS andFM. For details of rated firestopsystems see ULI s Fire ResistanceDirectory, Volume 2, ULC s List ofEquipment and Materials, FirestopSystems and Components, ITS' sListings Book and FM s ApprovalGuide.ULC: JF9, -29, -50, -51, -93, -99

and -100. HW36, -38, -39, -40,-41, -42, -43, -44, -45, -46, -47,-48, -49, -50, -51, -52, -53, -54,

Table 1 - PHYSICAL PROPERTIES

ResultProperty

Seal Seal NS

Uncured

Color blue white or red

VOC (ASTM D3960) 0.2 lb/gal US (26 g/L) 0.23 lb/gal US (27 g/L

% Volatile by volume (ASTM D2697) 43.0 41.9

Tack Free Time*, hours 4 1

Curing Time*, hours 24 96

Brookfield Viscosity (nominal),centipoises

10,000

(LVF, spindle 4

@ 5 rpm)

200,000

(RVT, spindle E

@ 10 rpm)

pH 9.1 8.5 8.8

Weight per Gallon, lb / imp. gal. 13.5

Cured

Color blue white or red

Dirt Resistance Excellent

Tensile Strength (ASTM D412), psi 330 365

Tensile Strength (ASTM D2370), psi 385

Elongation at break (ASTM D412), % 255 350

Elongation at break (ASTM D2370), % 370

* Curing time will vary with temperature, humidity and thickness.

Values given above are not intended for specification preparation.


21/23

-55 and -56.SP218, -219, -220, -221, -759,-761, -881, -882 and -1080.

ULI:CAJ-1125, -1127, -1324 and 1450. FF-D-1032 and -1038. FW-D-1029 and -1036.HW-D-0060, -0061, -0118, -0119,-0120, -0247, -0249, -0250, -0254,-0282, -0301, -0302, -0303, -1012,

-1020 and -1029. WW-D-1033.FM:90, 93, 95.ITS:AD/PH 180-01, -02 and -03.

AD/PHV 120-01, -02 and -03,180-09, -10, -11 and -12.

4. INSTALLATIONClean all openings to be firestoppedby removal of foreign matter andcontaminants such as oil, dust,grease, frost, water, surface dirt, oldsealants, glazing compounds,protective coatings etc.Cleaning of all surfaces should be

done on the same day in which thesealant is applied.

Priming: A/D FIREBARRIER Sealand Seal NS generally do notrequire priming. In view of theunpredictability of surface charac-teristics, it is recommended that atest sample of sealant be applied onthe surface to test adhesion.


appearance. The masking tapeshould not be allowed to touch theclean surface to which the seal is toadhere. Remove masking tapeimmediately.

A/D FIREBARRIER Mineral Wool isthe required backup material forfirestops.Install backup materials asspecified.A/D FIREBARRIER Seal isintended only for horizontal

applications. Check fire test designfor required thickness - usually 0.2in. (5 mm) wet. Pour or pump Sealin a continuous operation to fill andseal the opening. A light pass with

a trowel over the surface of the sealwill ensure a smooth surface.A/D FIREBARRIER Seal NSis non-slumping and may be sprayed ortrowelled for vertical and / orhorizontal applications. For sprayapplications refer to Table 2. Checkfire test design for requiredminimum wet film thickness -usually 0.2 in. (5 mm) or 1/8 in. (3.2mm).Excess sealant should be wipedfrom glass, metal and plastic

surfaces while uncured. Clean up iswith water.CURED SEALANT IS USUALLYVERY DIFFICULT TO REMOVEWITHOUT ALTERING OR DAM-

AGING THE SURFACE TO WHICHTHE SEALANT HAS BEEN

APPLIED.

Precaution: May cause irritation.May be harmful if swallowed. Avoidgetting in eyes. Wash hands

thoroughly after handling. Use onlyas directed.Keep out of reach of children.To safely use this product, read andabide by Material Safety Data Sheet

(MSDS).

Shelf Life:When stored at or below80F (27C) and above 40F (5C),

A/D FIREBARRIER Seal and SealNS have a shelf life of one yearfrom date of manufacture.Note:Protect from freezing.

5. AVAILABILITY AND COSTAvailability: A/D sales offices andtechnical representatives arelocated throughout North America.(See below)

6. MAINTENANCENo maintenance should be required.If seal becomes damaged, replacedamaged portion. Clean surfaces indamaged area and repair with fresh

A/D FIRE-BARRIER Seal or SealNS. Damage by other tradesshould be patched at the expense oftrade causing damage.


A/D FIRE PROTECTION SYSTEMSHead Office: 420 Tapscott Road, Scarborough, Ontario, M1B 1Y4

Tel: (800) 263-4087 or (416) 292-2361 Fax: (416) 298-5887

www.adfire.comContact By State or Province

AK, AR, AZ, CA, CO, HI, ID, LA, MT, NM, NV, OK, OR, TX, WA, WY, UT: Tel: (888) 323-3473, Fax: (949) 458-9220

AL, CT, DC, DE, FL, GA, IA, IL, IN, KS, KY, MA, MD, ME, MI, MN, MO, MS, NC, ND, NE, NH, NJ, NY,OH, PA, RI, SC, SD, TN, VA, VT, WI, WV: Tel: (800) 650-0881, Fax: (613) 841-7768

NB, NF, NS, PE, QC: Tel: (800) 914-6506, Fax: (450) 661-8776

AB, BC, MB, ON, SK: Tel: (800) 263-4087, Fax: (416) 298-5887

Table 2 Quick Reference Guide - Spray Application of Seal NS

Hoses300 ft max.

50ft of 3/8 in. dia. & 250 ft of 1/4 in. dia.

Whip line 9 ft whip line with swivel

Tips 5/17 heavy-duty self cleaning reversible type

Spray machineAirless sprayer capable of 3000psi pressure and min. delivery

of 1.0 gpm without surging

Filters 60-80 mesh in gun & 60-80 in manifold

Mixing Heavy-duty drill with paddle for 2 min.

Application Rate 1/8 in. (3 mm) wet

Finish Follows profile of backer material

Trowel May be toweled

Clean-up 10 gal water

April 2004


22/23

SELLOS CORTA FUEGO Y HUMO

ESPECIFICACIN SECCIN 078601 General1.1 LA SECCION INCLUYE

0.1 Cumplir con la Divisin 1, Requisitos General y Documentos referidos aqu0.2 Es la intencin de esta seccin de las especificaciones de establecer una nica,

y competente fuente que sea responsable de proveer toda la mano de obra,materiales, productos, equipos y servicios, para suministrar e instalar el trabajodel sistema de corta-fuego y sello de humo para toda la obra.

1.2 TRABAJO RELACIONADO ESPECIFICADO EN OTRO LUGAR(Especificar)

1.3 SECCIONES RELACIONADAS(Especificar)

1.4 ESTANDARES DE REFERENCIA0.1 (ANSI/UL 1479 - Pruebas de Fuego de Corta Fuego a Travs de Penetraciones)

(CAN4-S115-M85 - Mtodo Estndar de Pruebas de Fuego de Sistemas CortaFuego) (ASTM E814 - Mtodo de Prueba de Pruebas de Fuego de Corta Fuegoa Travs de Penetraciones) (ANSI/UL 2079 - Pruebas para Resistencia al Fuegode Sistemas de Juntas para Edificios).

1.5 DESCRIPCION DEL SISTEMA0.1 Materiales Corta Fuego: Proveer Sistema(s) Corta Fuego para proveer y

mantener una clasificacin de resistencia al fuego, como est indicado en losPlanos y de acuerdo a los detalles de diseo de UL, WH, ULC, cUL o FM.

1.6 REMISIONES (Submittals)0.1 (Especificar) (datos del fabricante) (planos de taller) (muestras)

1.7 ASEGURAR CALIDAD0.1 Fabricante: Compaa especializada en fabricacin de productos de esta Seccin

con un mnimo de tres (3) aos de experiencia documentada, y un sistema de

gerencia de calidad registrado de acuerdo con los requisitos de ISO 9001:2000.0.2 Aplicador: Compaa que tenga un mnimo de tres (3) aos de experiencia enla instalacin de los materiales aqu especificados en proyectos comparables aeste proyecto.

1.8 REQUISITOS DE NORMAS0.1 Cumplir con (Cdigos de Construccin locales), listados de (UL) (ULC) (cUL)

(ITS) (FM) y (ANSI/UL 2079) (CAN4-S115) (ASTM E814) prueba de fuegoestndar para obtener la clasificacin de proteccin al fuego requerida.

1.9 REQUISITOS AMBIENTALES0.1 Cumplir con las recomendaciones de instalacin del fabricante en cuanto a

temperatura, humedad, y condiciones de ventilacin.

1.10 ENTREGA, ALMACENAJE Y MANEJO0.1 Entregar materiales al sitio de la obra en los envases originales del fabricante,

intactos sellados y etiquetados por el fabricante. Manejar y almacenar losmateriales de acuerdo a las instrucciones del fabricante.

1.11 CONDICIONES DEL PROYECTO/SITIO DE OBRA0.1 Cumplir con los requisitos recomendados del fabricante en cuanto a

temperatura, humedad relativa y condiciones del substrato durante la aplicaciny curado de los materiales.

1.12 SECUENCIA Y PROGRAMACIN0.1 Coordinar con otras Secciones relacionadas. Programar el trabajo de otras

actividades de manera que las aplicaciones de corta fuego puedan serinspeccionadas antes de ser cubiertas por construccin subsecuente.

2 Productos2.1 FABRICANTES ACEPTADOS

0.1 Proveer corta fuego de selladores de silicona, selladores a base de agua, morteros,o sistemas corta fuego del siguiente fabricante: A/D Fire Protection Systems.

2.2 MATERIALES0.1 Los material(es) deben ser: A/D FIREBARRIER Mineral Wool (Lana Mineral) A/D

FIREBARRIER Silicone and Silicone SL (Silicona) A/D FIREBARRIER Mortar(Mortero) A/D FIREBARRIER Collars (Collarines) A/D FIREBARRIERIntumescent Caulk (Calafateo Intumescente) A/D FIREBARRIER Pillows(Almohadas) A/D FIREBARRIER Seal and Seal NS A/D FIREBARRIER

SprayMastic A/D FIREBARRIER Wrap Strip (Banda para Enrollar) A/DFIREBARRIER Putty (Masilla) A/D FIREBARRIER Putty Pads (Pads de Masilla)A/D FIREBARRIER Inserts (Pads de Masilla pequeos).

0.2 Clasificaciones de Sistemas Corta Fuego: Cumplir con los requisitos de cdigode construccin aplicable para las ubicaciones y horas de clasificacin contrafuego de las designaciones (F) (T) (FT) (FH) (FTH).

0.3 Materiales de relleno y soporte trasero, soportes y anclajes deben ser deacuerdo a las recomendaciones del fabricante, del sistema/diseo de cortafuego probado, y aceptable a las autoridades que tienen jurisdiccin.

0.4 Base antioxidante: como sea requerido por el fabricante, y que sea compatiblecon el sistema y los materiales contiguos.

0.5 Agua: Potable

3 Ejecucion3.1 EXAMINACION

0.1 Examinar substratos, aberturas, espacios, construccin adyacente, ycondiciones bajo las cuales el corta fuego va a ser instalado. Confirmarcompatibilidad con las superficies.

0.2 Verificar artculos que penetran estan fijados en forma segura, y ubicadosdebidamente dejando el debido espacio entre las penetraciones y las superficiesde las aberturas.

3.2 PREPARACION0.1 Las superficies que van a recibir el corta fuego deben estar libres de sucio,

polvo, grasa, aceite, xido, materiales sueltos, agentes de separacin,congelacin, humedad o cualquier otro material que impida la unin delmaterial corta fuego al substrato o artculo penetrante(s).

0.2 Aplicar base antioxidante a los substratos de acuerdo con las instruccionesescritas del fabricante.

0.3 No aplique corta fuego y sellos de humo a superficies previamente pintadas otratadas con selladores, compuestos de curado, repelentes de agua o otrosrevestimientos a menos que se hayan hecho pruebas que asegurencompatibilidad de materiales. Remueva los revestimientos que sean requeridos.

0.4 Asegurar que los anclajes, materiales de soporte, clips, mangas, soportes yotros materiales relacionados usados en las pruebas de fuego sean utilizados.

0.5 Cubrir cuando sea necesario, para prevenir que los materiales corta fuegohagan contacto con superficies adyacentes que quedarn expuestas durante eltrabajo. Remover la cinta adhesiva tan pronto sea posible sin daar el materialcorta fuego o el substrato.

3.3 INSTALACION0.1 Cumplir con los listados de (UL) (ULC) (cUL) (ITS) (FM), y con las

instrucciones del fabricante para el tipo de material y condicin de la aberturaen cada caso. Consultar con el fabricante para determinar el procedimientoadecuado para las condiciones no totalmente cubiertas en las instruccionesescritas. Registrar por escrito cualesquiera instrucciones recibidas, con copiaal fabricante.

0.2 Remover material corta fuego excedente prontamente en lo que el Trabajoavanza y cuando sea terminado.

0.3 Proveer bloqueos a prueba de goteos tal como sean requeridos para sellaraberturas y contener el material corta fuego hasta que se haya curado. Instalarlos bloqueos de acuerdo al diseo de prueba y las instrucciones del fabricante.

3.4 CONTROL DE CALIDAD DE CAMPO0.1 Notificar al Consultor cuando las instalaciones terminadas estn listas para ser

inspeccionadas antes de encerrar o tapar las reas que contienen los materialescorta fuego.

0.2 Organizar las inspecciones por la compaa de inspecciones y pruebasindependiente del Propietario, seleccionada y pagada por el Propietario.

0.3 Siguiendo las inspecciones de campo, proveer toda reparacin como searequerido para asegurar cumplimiento con los Documentos del Contrato.

3.5 LIMPIEZA Y PROTECCIN0.1 Al terminar este trabajo, remover todos los materiales, equipo y materiales

sobrantes del sitio de la obra. Dejar el rea de trabajo y superficies adyacentesen una condicin aceptable al Consultor.


23/23

StonCor South Cone con ms de 30 aos de experiencia en el pas, empresa del Grupo RPM,

ofrece al mercado industrial una solucin integral en la proteccin anticorrosiva.

Dicha solucin est compuesta por tres lneas de productos:

Stoncor South Cone S.A.

Einstein 1095 - Parque O.K.S.

(B1619JWA) Garn-Bs.As.

(54) 03327-442222 - Fax:442223

[email protected]

www.stoncor.com

South C o ne

Carboline Company

350 Hanley Industrial Court

St. Louis, MO 63144-1599

1-800-848-4645

Fax. 1-314-644-4617

www.carboline.com

Planta Industrial Garin - Arg

StonCor AD Firebarrier

Documents