Stomata An Inquiry Approach. Background 3 Stomata .

Stomata

AnInquiry Approach

Background

3

Stomatahttp://www.youtube.com/watch?v=cFX4JrsPaUs

Skills

5

How to: Microscopic Measurement

Determine the diameter of your “field of view.”

1. Begin with a clear ruler.

2. Place on the stage, visible under the lowest magnification for your microscope.

3. Determine the diameter of the field of view in mm.

4. 1mm=1000 Micrometers (μm)

1 mm

How to: FOV under a higher power lens

For a higher power, you need to calculate the field of view.

7

Zoom in

• (Original Obj/New Obj) x Original FOV=New FOV

• FOV=Field of View

7

Original Objective

New Objective

Original FOV (μm)

NewFOV

4x 10x 4500 1800

4x 40x 4500 450

4x 100x 4500 180

8

Stomata Prints

• Paint a small amount of polish on a small area of leaf

• Let dry• Lay tape on polish and press firmly• Peel off, tape on slide.

• Clear Fingernail Polish

• Clear tape

• Glass Slide

Stomata Questions

Onion Osmosis Analysis with Image

J

Cut a piece of outer pigmented tissue

Make a wet mount

Add concentrated salt solution

Take a picture through the microscope.

Save to computer.

Determining Percent Change in Area

Find your file and open it.

To get area and perimeter...

Select the straight line tool. Drag across your field of view.

Under analyze: Set scale

Pixels are already there. Enter your known distance.

Analyze: Set Measurements

Trace with the freehand toolGo to analyze: Measure

Compare before and after