This design is based on 3.4mm plywood (this is what I used. Other thicknesses should work without and modifications, though a respective change in friction between parts should be noted). All holes have been designed for 6mm dowel, assuming a kerf
This design is based on 3.4mm plywood (this is what I used. Other thicknesses
should work without and modifications,
though a respective change in friction
between parts should be noted).
All holes have been designed for 6mm
dowel, assuming a kerf
Stick these two semi
circle off-cuts together and stick on the
underside for a hand grip.
Stick these two semi
circle off-cuts together and stick on the
underside for a hand grip.
1: Top layer2: Base layer3: Optional cover