Hotel Project Structural Design Studio (May, 2012) Seattle, Washington, USA Property Type Hotel with Retail and Restaurants Client Texas A&M Graduate Program Engineers Steven S. Sun Ross Kruger Jackie Kafie Tyler Brendlinger Size 180,000 sq ft 25 floors; 582 hotel rooms 3D Rendering Revit: Steven S. Sun AutoCAD: Steven S. Sun SketchUp: Steven Sun Designer Steven S. Sun Hotel Project
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Hotel Project Structural Design Studio (May, 2012)
Seattle, Washington, USA
Property Type Hotel with Retail and Restaurants
Client Texas A&M Graduate Program
Engineers Steven S. Sun Ross Kruger Jackie Kafie Tyler Brendlinger
Size 180,000 sq ft 25 floors; 582 hotel rooms
3D Rendering Revit: Steven S. Sun AutoCAD: Steven S. Sun SketchUp: Steven Sun
Designer Steven S. Sun
Hotel Project
This project
focused mostly on
the structural
engineering aspect
of the building.
Steven Sun
designed the layout
of the rooms,
hallway,
restaurants, and
conference rooms.
Then whole team
worked on the
design for the
structural systems.
The design team
designed the
structural system
for the gravity
loads and the
dynamic loads of
winds and seismic
forces.
Some sample of
the AutoCAD detail
drawings and 3D
renderings of the
connections are
shown to the right
and on the
following page.
Above
The cross section of the designed shear wall. The W14X730
wide flange columns are encase in concrete, since rebars
would not be able to provide the needed tensile capacity.
Below
The Top and side views of the shear wall to floor beam
connection are shown as below.
Above
This figure illustrates
how the composite
floor system is
constructed. The
concrete slab is 2
inches thick on top of
the corrugated deck,
and is attached to the
floor beam by welded
shear studs designed
to achieve full
composite action
Below
The typical floor
beam to girder
connection
designed for this
building is the
single angle shear
connection with
three bolts. This is
designed for
sufficient capacity
and favored for its
constructability.
Row House Sweet Art Design Studio (Feb, 2013)
Chai Yi City, Taiwan
Sung Residence Sweet Art Design Studio (Nov, 2012)
Min Xueng Township, Taiwan
Project Status Under Construction
Conpletion Date 2014 Q2
Property Type Single Family House
Size 4,200 sq. ft 3 Floors 4 Bedrooms 5 Bath
Architect Zheng-Xueng, Guo
Assistant Designer Steven S. Sun
3D Rendering & Figure SketchUp: Steven S. Sun AutoCAD: Steven S. Sun