Step 2: Plan how you will place the rubber palm grips on the … · 2016-01-06 · Step 1: Clean your controller thoroughly using non-alcoholic wet wipes or a clean damp cloth and

Step 1: Clean your controller thoroughly using non-alcoholic wet wipes or a clean damp cloth and leave it to dry.

Step 2: Plan how you will place the rubber palm grips on the controller using the placement guide below.

Step 3: Peel off a corner of the adhesive backing paper and carefully position the sticky side of the rubber palm grip to the front of the controller.

Step 4: Place the rubber palm grip a few millimeters away from the character line and apply gentle pressure to prevent air bubbles.

Step 5: Wrap the rubber palm grip and be sure to leave a small gap around the parting line of the controller.

Step 6: Align the edge of the rubber palm grip to the rear corner of the controller.

Step 7: Stretch the bottom of the rubber palm grip as necessary and align it to the bottom of the controller.

Step 8: When finished, squeeze the rubber palm grip with your hand to ensure that it is properly attached.

RIGHTLEFT

PLACEMENT GUIDE