Neues Projekt anlegen und Cubefaces importieren Step1: Neues Projekt eröffnen und Einfügen der Cubfaces in den PhoenixCreator Step 1 Hier wird Schritt für Schritt das Anlegen eines neuen Projektes und das Einfügen der Cubefaces in den PhoenixCreator gezeigt. Mit "File--New--Flying site" wird ein neues Projekt eröffnet. myLearnPlace | eLearning - beraten-bauen-betreuen http://szenerien.de/efront/www/professor.php?ctg=content&view_unit... 1 von 10 17.09.2011 13:16
8
Embed
Step 1 - Neues Projekt anlegen und Cubefaces importieren
Tutorial for scenery-creation with Phoenix Creator - Sorry, the english translation in the comments were not converted, a new version is coming soon.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Neues Projekt anlegen und Cubefaces importieren
Step1: Neues Projekt eröffnen und Einfügen der Cubfaces in den PhoenixCreator
Step 1
Hier wird Schritt für Schritt das Anlegen eines neuen Projektes
und das Einfügen der Cubefaces in den PhoenixCreator gezeigt.
Mit "File--New--Flying site" wird ein neues Projekt eröffnet.
This is the field of work for your new project in Phoenix Creator.
Mit dem Klick auf den Button "Auto" wird ein neues Fenster geöffnet, in dem man den Pfad seiner Cubfaces suchen kann. Hat man den Pfad gefunden, wird das Bild (Cubfaces) mit der Endung "1.jpg" selektiert und übergeben. Den Rest macht der PhoenixCreator von selbst.
Click on "Auto" to open a dialog-box where you can choose the path to your cubefaces. Doubleclick the first .jpg and all cubefaces will be opened in Creator after a while.
Nach einigen Minuten (je nach Rechnerleistung) sind die Cubfaces importiert und man kann sich in seiner zukünftigen Szenerie
schon mit gedrückt gehaltener rechter Maustaste umschauen.
For a better overview you can switch off the little black window (Second view). It is useful in the further developing and construction work for a better overview of the crash-objects.
In der linken Hälfte des Bildes sieht man das Fenster "Toolbar" , mit der man während der ganzen Arbeit zu tun hat.
Wenn das Fenster nicht zu sehen ist, klickt man im Menü "Workspace"->"Reset Toolbars"
On left hand side of the window you see the "toolbar" window, where you can work on the settings for pano, lightning, collision, positions and weather. If this window is hidden, click on Menue: Workspace-> Reset Toolbar.
Aus Gründen der Übersicht ist es ratsam, dem Projekt einen eindeutigen Namen zu geben.
Click "Save" to save your project in a project-file. It is useful to keep the cubeface-jpgs at the same location, otherwise they will have to be imported each time again, when you open the project file.