Step 1: Connect SANLink to your Mac Step 2: Connect to ... Bank/Installation Guides/SAN… · Figure 1. SANLink Thunderbolt and power connections SANLink supports daisy-chaining to
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Connect a Thunderbolt cable from a Thunderbolt port on the SANLink to the Thunderbolt port on your MacBook Pro, MacBook Air, iMac, or Mac mini.
Figure 1. SANLink Thunderbolt and power connections
SANLink supports daisy-chaining to additional Thunderbolt devices.
Plug the low-voltage cable from the power supply into the power connector on the SANLink. Plug the high-voltage cable into the power supply and an electrical outlet. See Figure 1.
Step 2: Connect to Fibre ChannelOption 1. Direct Attached Storage
Connect a Fibre Channel (FC) cable from an FC port on the SANLink to an FC port on your VTrak RAID subsystem.
If your VTrak has dual RAID controllers, connect a second FC cable from the other FC port on the SANLink to an FC port on the other RAID controller.
Figure 2. SANLink connection to FC DAS
Figure 3. SANLink LEDs
Table 1: FC Port LEDs
Option 2. Storage Area NetworkConnect a Fibre Channel (FC) cable from an FC port on the SANLink to one of the FC ports on your FC switch.
If your SAN has two FC switches, attach a second FC cable from the other FC port on the SANLink to the second FC switch.
Make the remaining FC SAN connections as described in the user manuals for your FC switch and RAID subsystems.
Figure 4. SANLink connection to FC SAN
Need assistance or more information?To receive Technical Support for this product, please register in advance at http://support.promise.com/userRegistration.aspx.
The serial number is found on the underside of the SANLink.
“Thunderbolt and the Thunderbolt logo are trademarks of Intel Corporation in the U.S. and/or other countries.”
Cautions
• Connect the SANLink to one Mac system only.
• Do not place objects on top of the SANLink.
Important
Before you connect the SANLink to your Mac, run Software Update. Your Mac must have ONE of these updates:
• Mac OS X 10.6.8 with Thunderbolt Software Update 1.0
• Mac OS X 10.7 with Thunderbolt Software Update 1.0
Note
For host connectivity, SANLink requires:
• Thunderbolt cable
• SFP transceiver (check the compatibility list)
These items are sold separately.
Thunderbolt ports
Thunderbolt port
Thunderbolt cable
MacBook Pro
To additional devices
SANLink power connector
Power supply
Color Speed Solid Flashing
Blue 4 Gb/s
Connected ActivityGreen 2 Gb/s
Amber 1 Gb/s
White — No connection —
FC port onRAID controller 1
VTrak RAID Subsystem
FC port onRAID controller 2
SANLink
FC ports on SANLink
FC port LEDs
Online Support http://www.promise.com/support/support_eng.asp
Conecte un cable Thunderbolt desde un puerto Thunderbolt en el SANLink al puerto Thunderbolt en el MacBook Pro, MacBook Air, iMac o Mac mini.
Ilustración 1. Thunderbolt de SANLink y conexiones de energía
El SANLink admite la conexión en cadena a los dispositivos Thunderbolt adicionales.
Enchufe el cable de baja tensión de la fuente de alimentación en el conector de alimentación del SANLink. Enchufe el cable de alta tensión en la fuente de alimentación y en una toma de alimentación eléctrica. Ver Ilustración 1.
Paso 2: Conecte a Fibre ChannelOpción 1. Direct Attached Storage
Conecte un cable Fibre Channel (FC) desde un puerto FC en el SANLink a un puerto FC en el subsistema RAID VTrak.
Si el VTrak tiene controladoras RAID duales, conecte un segundo cable FC desde el otro puerto FC del SANLink a un puerto FC de la otra controladora RAID.
Ilustración 2. Conexión del SANLink al DAS FC
Ilustración 3. LEDs del SANLink
Tabla 1: LEDs del puerto FC
Opción 2. Storage Area NetworkConecte un cable Fibre Channel (FC) desde un puerto FC del SANLink a uno de los puertos FC del conmutador FC.
Si el SAN tiene dos conmutadores FC, adjunte un segundo cable FC desde el otro puerto FC del SANLink al segundo conmutador FC.
Realice las conexiones SAN FC restantes tal y como se describe en los manuales del usuario del conmutador FC y los subsistemas RAID.
Ilustración 4. Conexión del SANLink al SAN FC
¿Necesita asistencia o más información?Para recibir Asistencia técnica para este producto, regístrese con antelación en http://support.promise.com/userRegistration.aspx.
El número de serie se encuentra en la parte inferior del SANLink.
“El Thunderbolt y el logotipo de Thunderbolt son marcas comerciales de Intel Corporation en los EE. UU. y/o en otros países”.
Precauciones
• Conecte el SANLink a un solo sistema Mac.• No coloque objetos encima del SANLink.
Importante
Antes de conectar el SANLink al Mac, ejecute la actualización del software. Su Mac debe tener UNA de estas actualizaciones:• Mac OS X 10.6.8 con la actualización de software Thunderbolt 1.0• Mac OS X 10.7 con la actualización de software Thunderbolt 1.0
Nota
Para conectividad de host, el SANLink requiere:• Cable Thunderbolt• Receptor SFP (compruebe la lista de compatibilidad)Estos artículos se venden por separado.
Puertos Thunderbolt
Puerto Thunderbolt
Cable Thunderbolt
MacBook Pro
Para dispositivos adicionales
Conector de energía SANLink
Fuente de alimentación
Color Velocidad Sólido Intermitente
Azul 4 Gb/s
Conectado ActividadVerde 2 Gb/s
Ámbar 1 Gb/s
Blanco — Sin conexión —
Puerto FC de lacontroladora 1 RAID
Subsistema RAID VTrak
Puerto FC de lacontroladora 2 RAID
SANLink
Puertos FC del SANLink
LEDs del puerto FC
Soporte en línea http://www.promise.com/support/support_eng.asp