Stellar Service Cranes and TMAX™ Service Bodies 3315 · Crane Rating: 11,500 ft-lbs (1.59 ton-meters) Standard Boom Length: 7’ (2.13 m) from CL of Crane Boom Extension: • 1st

Our People. Our Products.

TECHNICAL SPECIFICATION GUIDE

Stellar® Service Cranes and TMAX™ Service Bodies

3315

SPECIFICATION INFORMATIONCrane Rating: 11,500 ft-lbs (1.59 ton-meters)Standard Boom Length: 7’ (2.13 m) from CL of Crane

Boom Extension: • 1st Stage: Hydraulic 48” (121.9 cm) • 2nd Stage: Manual 48” (121.9 cm) / Optional Hyd.

Max. Horizontal Reach: 15’ (4.57 m) from CL of Crane

Maximum Vertical Lift: 17’ 8” (5.40 m)(from crane base)

Boom Elevation: -10º to +80º

Stowed Height: 31.2” (79.2 cm)(crane only) Mounting Space Required: 18” x 15” (45.7 x 38.1 cm)

Approximate Crane Weight: 3315 (electric) 2H: 940 lbs (426 kg) 1H1M: 860 lbs (390 kg) 3315 (hydraulic) 2H: 850 lbs (386 kg) 1H1M: 770 lbs (349 kg)

Controls: Radio control standard for all functions (Stellar® CDT™ control system optional)Winch • Rope Diameter: 1/4” (0.63 cm) 7X19 GAC X 65’ (19.81 m) • Line pull speed: 30 ft/min (9.1 m/min) • Max. single part line: 1,600 lbs (725 Kg) • Max. double part line: 3,200 lbs (1450 Kg)

Rotation: 370 degree power (worm gear)

Lifting Capacities: 3,200 lbs @ 3’ 7” (1451 kg @ 1.10 m) 765 lbs @ 15’ (345 kg @ 4.6 m)

Power Supply Required: 12V power unit: 2 gpm @ 2,600 psi (7.6 lpm @ 179 bar) PTO & pump: 3 gpm @ 2,600 psi (11.4 lpm @ 179 bar)

Min. Rec. Chassis (GVRW) 10,500*

NOTE: All Stellar cranes meet ANSI B30.5 and OSHA 1910.180 specifications.Specifications subject to change without notification.

*Guideline for Stellar® TMAX™ package with curbside rear crane. Consult with Stellar for other installations.

STELLAR® 3315 TECHNICAL SPECIFICATION GUIDE

DEFINING CHARACTERISTICSRadio Control SystemEvery electric, on/off, or proportional 3315 comes standard with a radio remote control. Stellar is the market leader with standard radio remote controls.

Stellar® CDT™ (Crane Dynamics Technology™)Standard on 3315 proportional hydraulic crane, the Stellar CDT control system is revolutionary to the telescopic service crane market and EXCLUSIVE TO STELLAR. This system features capacity alert to the handheld crane remote and also features a Safe Mode to keep the crane and operator safe should a load indicating device fail to operate correctly.

Internal Extension CylinderNew to the 3315 crane is our new internal cylinder extensions system. Designed to the same standards of our larger cranes, you will find the looks and performance of our extension booms second to none.

Full Hydraulic Extension The 3315 crane offers an optional boom configuration of two hydraulic boom extensions. The 3315 cranes come standard with a one hydraulic, one manual boom configuration.

Market Leading Boom ArticulationThe Stellar 3315 crane offers -10 degrees to +80 degrees. This gives the operator both easy reach to snatch block stowing and the best ability to load items into the load bed.

Quick Release Snatch Block StowThe Stellar quick release snatch block stow is installed on the underside of the boom to easily stow your snatch block after use. Its unique design gently releases the snatch block for use when the boom is raised at close to 60 degrees to ensure a safe and orderly deployment.

Planetary WinchThe planetary winch on every crane manufactured by Stellar was designed to match the capacity and hydraulic control system. It lifts the maximum crane load and offers the smoothest and fastest speeds in the market today to help keep your productivity at max levels.

Strong Rotation SystemStellar uses a durable rotation system with a cast iron base and an internal mechanical stop to provide the most durable rotation system found in the industry.

Counterbalance ValvesEach cylinder on the Stellar 3315 crane feature counterbalance valves to prevent unintended cylinder movement should a hose break.

Greaseable Pivot BushingsEach pivot pin location on the 3315 crane includes bushings and grease zerks to provide for years of use.

Hexagonal BoomsStellar Industries made the hexagonal boom design famous in the telescopic service crane market. This design provides for a stronger and better aligning boom than competitive square boom design.

Bar Style Anti-Two BlockThe 3315 crane is equipped with a low profile bar style anti-two block system that allows for easy access to the tightest lifting locations.

stellarindustries.com

Model 3315 CraneSpecifications Sheet Page: 2 of 4

Crane Rating*:

Standard Boom Length:Boom Extension:

Maximum Horizontal Reach:

Maximum Vertical Lift:

Stowed Height (Crane Only):

Required Mounting Space:

Approximate Crane Weight:

Controls:

Wire Rope:

Boom Elevation:

Line Pull Speed:

Max. Single Part Line:

Max. Double Part Line:

Rotation (Worm Gear):

Lifting Capacity**:

Power Supply:

1st Stage:

2nd Stage:

Winch Specifications

765lbs350kg

1045lbs475kg

1640lbs740kg

1700lbs770kg

1080lbs490kg

3200lbs1450kg

3’.914 M

0’ 6’1.83 M

7’2.13 M

11’3.35 M

15’4.57 M

0’

3’.914 M

6’1.83 M

9’2.74 M

12’3.66 M

15’4.57 M

16’9”6.02 M

Reach in Feet/MetersCapacity in Pounds/Kilograms

Weight of load handling devices are part of the load lifted and must be deducted from the capacity.

Maximum 1 - part line capacity is 1600lbs (725kg). For greater loads, use 2 - part line.

790lbs360kg

885lbs400kg

1205lbs545kg

1895lbs860kg

2320lbs1050kg

3200lbs1450kg

3200lbs1450kg

2090lbs950kg

1530lbs695kg

1080lbs490kg

1475lbs670kg

3200lbs1450kg

3200lbs1450kg

2960lbs1340kg

3200lbs1450kg

Weight of load handling devices are part of the load lifted and must be deducted from the capacity.

Maximum 1 - part line capacity is 1600 lbs. (725 kg). For greater loads, use 2 - part line.


Crane Rating*:







Controls:

Wire Rope:

Boom Elevation:

Line Pull Speed:




Lifting Capacity**:

Power Supply:

1st Stage:

2nd Stage:


9'10"3m

13'10"4.22m

17'9"5.41m

7'8"2.34m

15'8" 4.78m

11'8"3.56m

2'1"0.64m

2'10"0.86m

1.07m 3'6"

0.27m11in

1'7"0.48m

®

3315 CAPACITY CHART GEOMETRIC DIMENSIONS

ROTATIONAL CLEARANCE


Crane Rating*:







Controls:

Wire Rope:

Boom Elevation:

Line Pull Speed:




Lifting Capacity**:

Power Supply:

1st Stage:

2nd Stage:


92.11in7.68ft

21.00in1.75ft

15.75in1.31ft

47.20in3.93ft12V

34.63in2.89ftHYD

CG

31.15in2.60ft

108.85in9.07ft

11.73in.98ft

23.29in1.94ft12V

16.50in1.38ftHYD


Crane Rating*:







Controls:

Wire Rope:

Boom Elevation:

Line Pull Speed:




Lifting Capacity**:

Power Supply:

1st Stage:

2nd Stage:


92.11in7.68ft

21.00in1.75ft

15.75in1.31ft

47.20in3.93ft12V

34.63in2.89ftHYD

CG

31.15in2.60ft

108.85in9.07ft

11.73in.98ft

23.29in1.94ft12V

16.50in1.38ftHYD

DIMENSIONS

190 State StreetP.O. Box 169

Garner, IA 50438Telephone: (641) 923-3741 • (800) 321-3741

Fax: (641) 923-2812Internet: www.stellarindustries.comEmail: [email protected]

An Employee Owned Company.Copyright © 2020 Stellar Industries, Inc.

STL000057 4/2020

Our People. Our Products.

®Your local distributor:

SS1VR

SS HORIZSS1VF

SSREAR

CS2VCS HORIZCRANECOMPT CS1V

NEW TMAX™ Service Bodies

SS1VR

SS HORIZSS1VF

SSREAR

CS2VCS HORIZCRANECOMPT CS1V

TMAX1™ Service BodyApplicable Chassis: 16,000 – 19,500 GVWR (19.5 tire size)

Compatible Crane Models: 3315 4421 5521 7621 7630

Cab to Axle: 84” (213.36 cm)Body Length Nominal: 133” (337.82 cm)Body Height: 44” (111.76 cm)Body Width: 94” (238.76 cm)Compartment Depth: 22” (55.88 cm)Floor Width: 50” (127 cm)Net Weight: 3220 lbs (1460.37 kg)

Stellar Service Cranes and TMAX™ Service Bodies 3315 · Crane Rating: 11,500 ft-lbs (1.59 ton-meters) Standard Boom Length: 7’ (2.13 m) from CL of Crane Boom Extension: • 1st

Documents