STEEL SHUTTERING AND SCAFFOLDING - TradeIndia

www. .comshreehariengineering

STEEL SHUTTERINGAND SCAFFOLDINGManufacturing — Rental — Maintenance



Smart scaffolding forinnovative construction

www. .comshreehariengineering02

THE COMPANY

OUR HUMBLE BEGINNINGSWe began our journey by accumulating and integration our values, our mission, and our beliefs into a company known as Shree Hari Construction. This enterprise of ours acted as a means to enter the construction industry in Ahmedabad, where we were able to carve out a niche for ourselves. Our main area of expertise was in RCC construction, which can be elaborated as Reinforced Cement Concrete construction. After over 35 years of experience in the industry, with numerous projects to our name and myriad clients being a part of our endeavor, we decided to move a step further and enter into the realm of scaffolding. This was when the idea of Shree Hari Engineering was conceived and given life to.

OUR AREAS OF EXPERTISESince the year of conception, namely 2014, Shree Hari Engineering has grown and developed to become the fastest growing enterprise in Ahmedabad within the Scaffolding industry. Some of the main areas of specialization of this enterprise of ours include complete conceptualization, designing and manufacturing of a wide range of Scaffolding Cup lock Systems. Some of the main products that we offer include the following :MS props, Cuplock System, H-frames, Shuttering Plates, Acro Wall-forms, U' Jack, Base Jack, Anchor Nut, Fix & Swivel Couplers, Tie Rod.

OUR EXPERTISE As far as our scaffolding products are concerned, our main aim is to cater to and maintain high standards of customer satisfaction, reliability and quality, using fair practices to meet client preferences. Some of the major uses of scaffolding are found in the construction industry. Scaffolding provides much-needed support and safety to workers, especially during projects that involve creating large structures. Scaffolding also provides a platform for workers to perform their construction related responsibilities, thereby acting as a powerful base for the efficient completion of the same. The scaffolding material that we manufacture is fabricated by employing the latest automated machineries, which help in the creation of products which are highly durable.

OUR CONVICTION TO TIME AND EFFORTLogistics is an important aspect of what we do at Shree Hari Engineering. For us, maintaining stringent delivery schedules and gaining customer loyalty through impeccable distribution is as important as maintaining the quality of our products. Our enterprise is driven by the constant need for progression through innovation and expansion of our skills, abilities and capacities. This is what helps us stand out amongst our competitors in the industry, thereby making us one of the biggest names in the modernized scaffolding industry, especially as far as the domestic market scenario is concerned.

WORD OF MOUTH ADVERTISING IS A TESTAMENT TO OUR COMMITMENT TO CUSTOMER SERVICE.

03

OUR COMMITMENT TO CLIENTSOur way of working involves embracing the resources and capabilities of our clients and getting the most out of them in order to attain perfection. By using client-based resources such as scaffolding manpower, materials, access & formworks, we are able facilitate the successful completion of projects in a cost effective manner. Our motto in this case is to ensure that quality, safety and environmental factors are not compromised during the course of our projects. Other than providing scaffolding products & services, we also offer a reliable rental service for our clients. Through this service, clients can make use of our scaffolding equipment for their projects at nominal charges, without compromising on the immense quality and efficiency that our products are known for.

OUR MISSION

The four main pillars of our mission, which have driven us forward towards new horizons, are customer focus, integrity & professionalism, quality, and commitment.

CUSTOMER FOCUS

The main objectives of our enterprise include client satisfaction, value addition and customer service. Our method of working is solely dependent on process-driven and result-oriented systems of functioning. We strive to keep ourselves updated with modern technology so that we can keep our systems and processes in sync with the latest developments of the industry. Our vast scope within the realm of engineering, flexibility as well as efficiency enables us to master any type of project, making us experts in building and maintaining long-term business relationships. We aim to create a symbiosis between our company and your firm and enterprise, where development and innovation is done in the spirit of mutual benefit.

QUALITY

One of the core facets of our mission involves the maintenance of quality, reliability and exceptional adaptability as far as catering to our clients in the commercial, industrial, building & domestic sectors in concerned. Integrity & Professionalism. Our conviction to quality, flexibility & reliability is maintained through an immense emphasis on integrity & dignity. We value professionalism & make sure that each & every project is conducted by keeping in mind the highest standards of ethics and legality.

MANUFACTURING & INFRASTRUCTURE

The manufacturing plant is having a total about 45,000 sq. ft. of working area with very well equipped and modern machineries, Technical experts and personnel as well as logistical infrastructure of the established industrial zone.


We manufacture quality products using high-end technological machineries like, Multi Drilling Machine, Automatic Mig Welding, Threading Machine, Shearing Press etc. Shree Hari Engineering provides it’s customer reliable solution that are

on par with standards of safety, quality and formwork, efficiency while still being cost effective.

05

TRAINING / SERVICES

OUR OFFERING

SCAFFOLDING DESIGN / ENGINEERING

The manner and overall approach that we take towards manufacturing Cup lock scaffolds and other supporting structures determine the success of our projects. Our aim is to provide engineering solutions that can help in the betterment and advancement of the scaffolding equipment industry. Our expertise in Cup lock scaffolding design helps us in providing tailored solutions for each client, which includes both common layout as well as custom design.

SCAFFOLDING DESIGN CALCULATION

We follow a stringent and precise process of calculation and measurement, which is a crucial part of each project that we undertake. Our measurement procedure involves analyzing the structure drawing of your project, which is used to understand and calculate the scaffolding requirements for the same. The measurement of requirements is also done by keeping in mind our own abilities as far as delivering quality solutions in a cost and time-effective way is concerned.

SPECIALIZED TRAINING

One of the biggest problems associated with any type of construction project is the probability of individuals falling from heights due to lack of proper safety precautions. In an age where insurance costs and personal injury can cost a company a fortune, taking the right safety precautions during a project can mean a lot to its overall success. Therefore, harboring a qualified workforce which consists of individuals who have been trained in the intricacies of scaffolding operatives can be a big step towards successful execution.

Due to our extensive experience in scaffolding implementation and usage, we can provide on-site supervision and guidance for workers on how to work with Cup lock scaffolding and make the most of its efficiency. The practical knowledge that we provide to workers can help them assemble and disassemble the scaffolding equipment with ease at the project site, thereby improving time management as well as safety. Owing to the immense emphasis we place on the maintenance and strengthening of our relationships with clients, our duty and obligation to approach each project with utmost attention and care is paramount. Through our scaffolding consultancy services and regular workplace inspections, we provide both management and operational support. This enables our clients to maintain safety and adhere to best practices as far as working with the Cup lock scaffolding system is concerned.

THEORETICAL EXPERIENCE

This part of the training and specialization program initiated by Shree Hari Engineering involves getting workers acquainted with the uses and applications of the cup lock scaffolding system. This part of the training also involves familiarizing the workers with the safety procedures that need to be taken when working with scaffolding systems. The essence of safety as well as applicability lies in teaching workers how to erect, dismantle, and alter the scaffolding material in a quick and proper manner. The theoretical knowledge for usage and safety applications would involve using picture presentations in order to help make learning easier for workers.

PRACTICAL EXPERIENCE

In the practical part of our specialization and training program, our trainers demonstrate each and every skill required for the purpose of utilizing scaffolding equipment in the best way possible. Our engineers also act as crucial nodes for the development of the project, by providing crucial information & practical knowledge whenever it might be required by the workers. Practical guidelines, solutions and on-site demonstrations are all part of the package that we offer as far as each and every project we undertake is concerned.


OUR PRODUCTS01 CUPLOCK SYSTEM 08

02 ADJUSTABLE PROP / MS PROP 10

03 SCAFFOLDING GALVANIZED PROP 11

04 BASE JACK | U JACK 12

05 SHUTTERING PLATE 13

06 FILM FLASHED SHUTTERING PLYWOOD 14

07 H - FRAME SCAFFOLDING 15

08 JALI / PLANK 16

09 ACRO PLATE WALL FORM 17

10 TELESCOPIC SPANS / ACRO SPANS 18

11 SYSTEM FORMWORK 19

12 FORMWORK H BEAM 20

13 SOFT WOOD SAWN TIMBER 21

14 GIRDERS / I BEAM (ISMB) 22

15 HEAVY DUTY BRIDGE CRIB (TRESTLE) 23

16 MS PIPE AND COUPLERS 24

17 SCAFFOLDING MAINTENANCE 25

18 ACCESSORIES 26

19 OUR GROWTH PARTNERS 27

07

THE CUP LOCK SYSTEM

This is one of the most flexible types of scaffolding systems that can be used for the construction of slab floors. Some of the main features of this particular system is the ease with which it can be used even in cramped and narrow spaces. The system consists of only a few components, which are very easy to assemble, thereby improving the convenience related to finding solutions for level difference during construction.

BASIC STRUCTURE

The basic unit of a cup lock scaffolding system consists of four horizontal elements which are fixed at a single point along the vertical element. The same elements which are part of the system can be used to create suitable solutions for the purpose of assembling a stair tower, due to the high load bearing capacity associated with the system.

The vertical elements in the system are equipped with locking kits, which are welded onto them at intervals of 500 mm or 1000 mm. This offers an economical and practical solution for projects which have level difference at the ground or at the deck. The locking kit consists of bottom and top cups, of which the bottom cup is welded onto the vertical element. The top cup or the upper cup is moveable along the length of the vertical element.

With the mobility of the upper cup comes the responsibility of ensuring that it is not removed from the vertical element completely, owing to the structural difficulties that could occur due to the misplacement of the same. The heads of the horizontal elements, which are structured out of both ends of an element, are fixed between the cups along the vertical elements. With the help of a hammer, the upper cup can be rotated in the clockwise direction and the head of the horizontal element is squeezed rigidly between the upper and lower cups.

CUPLOCK SYSTEM

ONHIREONHIREONHIRE

AVAILABLEAVAILABLEAVAILABLEALSOALSOALSO


CUPLOCK STANDARD / VERTICALCuplock standard / vertical are manufactured from 48 mm OD MS Round Pipe, provided in various sizes with cup joints welded at 500 mm Intervals. The top cups are made from malleable casting to endure rough site handling, and welded bottom cups are pressed from high quality steel.

LEDGER

CUPLOCK LEDGER / HORIZONTALThe cuplock Ledger is used to make rigid bond to endure uneven site handling. This cuplock ledger is comprised of Forged Blade at the both end which fits between Top cup and Bottom cup of cuplock vertical. MS round pipe will be used of 48.00 OD 3.00 mm thick. Minimum projection of blades avoids damages in handing & uniform dimension makes the cup joint rigid.

STANDARD SIZESSIZE IN METER APPROX WEIGHTVertical 1.00 Mtr. 2 Cuplock 4.70 KgVertical 1.50 Mtr. 3 Cuplock 6.80 KgVertical 2.00 Mtr. 4 Cuplock 9.00 KgVertical 2.50 Mtr. 5 Cuplock 11.50 KgVertical 3.00 Mtr. 6 Cuplock 13.65 Kg

STANDARD SIZESSIZE IN METER APPROX WEIGHTLedger 0.500 Mtr. 2.00 KgLedger 1.000 Mtr. 3.75 KgLedger 1.500 Mtr. 5.46 KgLedger 2.000 Mtr 7.15 KgLedger 2.500 Mtr. 8.50 Kg

SPIGOT PIN / JOINT PINThe spigot pin is used in cup lock system. It is made out of 250/300 long round pipe of 38 MM OD. Spigot is connecting internally and to allow ease of joining. Though small in size. They are important part of scaffolding network as they alone are able to support structure up to multistoried.

VERTICAL

ONHIREONHIREONHIRE


09

ADJUSTABLE PROP/MS PROP

These are crucial components that can be used for the purpose of all types of building construction projects. These elements provide ideal and economic solutions for supporting all kinds of formwork, slabs, beams, walls and columns. These act as adjustable load bearing supports which especially find usage in withstanding vertical loads or as wall braces. These are also known as Adjustable Props, also known as Scaffolding Jacks, Shoring Props, Post Shore Props, Formwork Props, and Pipe Support. Heavy Duty Steel Prop, Light Duty Props, and Normal Duty Props, are other forms of this type of arrangement.

SPECIFICATIONS

¶ Outer members are made of 60 m OD round pipe

¶ Inner members are made of 48 mm OD round pipe

¶ Top & Bottom plates are made of 150 x 150 x 6 mm plates

¶ Heavy duty malleable cast iron prop nut provides the facility for fine adjustment

¶ G' pin made of high tensile strength also provides facility for fine adjustment

ADDITIONAL FEATURES

¶ Our roll-threaded props ensure that loss of material is reduced to a great extent, through which load bearing capacity as well as shelf life of the prop is increased to a large extent

¶ As per the needs of the customer, Props are available with various heads like Beam Head, 'U' Head, Angle Head and Regular Flat Head

ADJUSTABLE PROP / MS PROP

SIZES OF MS STEEL PROP

Outer Inner Weight

1.50 mtr x 1.50 mtr 14.20 Kg2.00 mtr x 2.00 mtr. 18.00 Kg2.00 mtr x 2.50 mtr. 19.60 Kg

Outer Inner Weight

2.00 mtr x 3.00 mtr. 21.25 Kg2.50 mtr x 2.50 mtr. 21.80 Kg2.50 mtr x 3.00 mtr. 23.40 Kg

ONHIREONHIREONHIRE



PROP SLEEVE

PROP NUT(HEAVY DUTY)

PROP G LOCK

11

SCAFFOLDING GALVANIZED PROP

Props Provide the Ideal and the most economic method of support for all kinds of formwork, slabs, beams, wall & Columns. Scaffolding Galvanized Prop treated with high quality zinc. They are also invaluable for a wide variety of applications in general building construction and repair work. Props eliminate the costly labour and time consumed in cutting timber to length, wedging and nailing when used in the vertical as a prop which is made as per heavy & light duty. Props are the compression members used as temporary supports for building and civil engineering works incorporating a means for adjusting and fixing their length. Props are designed to provide a simple & cost effective method to shore and re-shore. Props are used in all types of construction work to withstand vertical loads or acts as wall brace wherever adjustable load bearing members are required.

Sizes : Various Sizes as per customer requirement and specification

SCAFFOLDING GALVANIZED PROP

ONHIREONHIREONHIRE


SIZES OF GALVANIZED PROP

Outer Inner Weight

1.50 mtr x 1.50 mtr 19.00 Kg2.00 mtr x 2.00 mtr. 24.50 Kg2.00 mtr x 3.00 mtr. 29.00 Kg

BASE JACK/U JACK

The U Jack/adjustable jack stirrup head is used at the top of the vertical cuplock standard in order to provide an additional maximum adjustment of length up to 300 – 600 mm. The main application of these types of U-Jacks is to hold MS beams and chennal in places, upon which the shuttering plates are placed during the construction. The U-Jacks are manufactured using the Roll Threading process, which increases safety and enables them to have a load-bearing capacity of up to 4 tons.

Hollow Pipe Jack

Size Weight

230 mm 1.850 Kg

350 mm 2.300 Kg

450 mm 2.600 Kg

600 mm 3.200 Kg

MS Solid Rod

Size Weight

300 mm 2.650 Kg

350 mm 2.850 Kg

450 mm 3.500 Kg

600 mm 4.350 Kg

Base jacks locate in the bottom of the cuplock standards standards (vertical), they provide adjustment for variations in ground levels, and they have a safe working load of approx 4 tons each.

Specification :

¶ Hollow pipe of 38 mm OD and Solid Rod 32 mm OD¶ The Jack Nut of SG Iron Castings¶ Base Plate size : 150mm x 150mm x 6mm thick

U Jack & Base Jack are Specially designed for leveling scaffolding, fast and accurate onsite installation is provided by a combination of coarse and fine adjustment up to maximum of 550 mm and can be customized.

BASE JACK | U JACK

ONHIREONHIREONHIRE



SHUTTERING PLATES / CENTERING PLATES

These products are one of the core elements which are used for supporting building constructions slabs, canopies, beams, lintels for RCC construction work. These plates provide a much needed alternative for wooden plates, as they are manufactured using non-corrosive and durable materials. Shuttering plates are fabricated from 3.00/2.5 mm thick MS Sheets and 25/30/35 X 4/5 mm thick MS angle. As per the requirements and preferences of the clients, the sizes can be customized and adjusted. Even the shapes can be changed in order to fulfill specific requirements for clients.

BASICALLY TWO TYPES OF SHUTTERING PLATES

Welded and Riveted shuttering plates

These structures are known by different names, include centering plates, steel plates, Farma, floor form panels and so on. The sizes of these plates are as follows:

Welded shuttering plates

Size Weight

900 mm x 0'9" 08.00 Kg900 mm x 1'0" 10.00 Kg900 mm x 1'3" 11.00 Kg900 mm x 1'6" 12.00 Kg900 mm x 2'0" 16.00 Kg

Riveted shuttering plates

Size Weight

3'0" x 0'9" 06.00 Kg3'0" x 1'0" 07.00 Kg3'0" x 1'3" 08.00 Kg3'0" x 1'6" 10.00 Kg3'0" x 2'0" 12.50 Kg

SIKANJA / BEAM CLAMP / SHUTTERING CLAMP

Sikanja is used for shuttering formwork, Mainly in column. It hold both the sides of wall of column. Sikanja is made up of 30 x 5 mm M S Flat which tempered by heat treatment to strengthen Apart from this, offered clamps are available in standard as well as customized

Available in different sizes :

2' 0" - 1.13 Kg | 2' 6" - 1.32 Kg | 3' 0” - 1.50 Kg

ONHIREONHIREONHIRE

AVAILABLEAVAILABLEAVAILABLEALSOALSOALSOSHUTTERING PLATE

13

Shuttering Plywood is BWP grade plywood treated with preservatives mainly used for concrete purpose. Manufactured with select hardwood, it withstands the loads & forces encountered during the pouring of concrete and vibrations

APPLICATIONS

Construction, Repair and Maintenance of Buildings, Bridges, Beams, Fly-overs, Vehicle Bodies, Roofing

Std. Thickness (mm) : 12, 18

Sizes : 2440 X 1220 MM

WEIGHT

Imported Calibrated Ply : 25.00kg - 12 MM

Imported Calibrated Ply : 34.00kg - 18 MM

Indian Ply : 30.00kg - 12 MM

Indian Ply : 45.00kg - 18 MM

SALIENT FEATURES

¶ Film Faced Shuttering Plywood is most effective in RCC Constructions.

¶ It has a smooth mirror like superior finishing on both surfaces.

¶ It saves up to 45% of cost compared to other similar products due to its more repetition during shuttering work.

¶ Its cross laminated structure between Face veneer, Core veneer and the Film again enhance the strength of ply.

¶ After using it as shuttering plywood for many times, its salvage can be used for paneling, roofing, flooring, partitions etc.

TIPS FOR MAINTENANCE

¶ Clean & Oil the surface before use. The surface should be recoated with mould oil before next use.

¶ Apply sealants such as chlorinated rubber paint at the cut edges before use.

¶ Side screwing and nailing should not be performed on the ply.

¶ Should be stored in packs on a flat and raised surface in a dry, covered place with free circulation of air for better repetitions.

¶ Care should be taken during transportation to avoid scratches, plywood should not be dragged over one another to avoid scratches.

FILM FACED SHUTTERING PLYWOOD


H-FRAME SCAFFOLDING

Shree Hari Engineering is known for providing the most popular scaffolding frame set/H frame for use in plastering, masonry, and general construction. The H-frames are created in the Safeway Style, which makes them compatible with frame scaffolding as well. These frames are manufactured from the highest quality MS pipes.

H-frames consist of welded frames with 48 OD vertical pipes, which are braced together with scissor type cross braces that are secured by bolts. The H-frames are essentially parts of a larger system, which is bound together by components known as modules. One module within this system consists of two H-frames and two diagonals. An entire H-frame system consists of one horizontal connection and four cross bracings. The entire system covers an area of 1.8 meters.

H FRAME SCAFFOLDING

SIZES OF 'H' FRAMES

CROSS BRACINGS

This type of scaffolding system is used whenever the situation arises where large heights are to be scaled. Cross bracings are crucial for H-frames as they can add immense strength and stability for these systems, especially when placed at distances of 2.5, 2.0, 1.5, and 1.0 meter. The cross bracings can also be customized according to the height which needs to be scaled. Using the cross bracings as a part of the H-frames is especially useful as far as utilizing them for the purpose of support staging and access scaffolding is concerned.

Size

1.50 x 1.00 mtr. 20.00 Kg./Nos.

1.50 x 1.25 mtr. 21.50 Kg./Nos.

2.00 x 1.00 mtr. 24.00 Kg./Nos.

2.00 x 1.25 mtr. 25.50 Kg./Nos.

(HxW) Weight

SIZES (IN MM) : 30 x 30 x 4, 34 x 34 x 4, 37 x 37 x 3.

ONHIREONHIREONHIRE


15

JALI (KHAPEDA) / PLANK / WALKWAY / MS CHALI

A Jali is a crucial tool as far as any construction work is concerned, due to its use as a temporary platform that can be integrated with the help of cup lock standards and ledgers. These contraptions are especially useful for works related to outer wall plastering, glass fittings and so on. Jalis or walkways have the dimensions 25 X 25/20 X 20, which are created using M. S. Square pipes and 20 NB round pipes. The thickness of the pipes are altered and changed according to the client's requirements.

These can be used to increase the rate of work by allowing more than one individuals to focus on the same area at the same time. Jalis are durable contraptions, which enable them to bear the load of people as well as materials without buckling under the weight of the same. The standards we follow as far as galvanized steel components as well as the technological measures we take to ensure their lightweight character help in creating superior quality support systems for employees. The technical specifications of these products are as follows: 2.5 mtr long X 0.3 mtr wide.

JALI (KHAPEDA) SIZES (in mm)

Size 2000 x 300 2500 x 300 2500 x 350 3000 x 300 3000 x 350

Weight 15.00 Kg 18.00 Kg 20.50 Kg 22.50 Kg 25.00 Kg

JALI / PLANK

TRIPOD STAND FOR JALI (KHAPEDA)

This is a easy supporting accessory for Masonry, Plaster and For- sealing work to adjustable height and width range.

Main Function: Pin up to make it fixed and not move. The commonly sizes are: any reasonable size is can be customized accordingly.

Adjustable Range : 500 mm or as per client requirement.

Sizes :

1 Diameter range on tube 48-60 mm

2 Thickness range on tube 2.8mm, 3.2mm

3 Angle Size 35 x 35 x 5 mm and 30 x 30 x 3 mm

ONHIREONHIREONHIRE



ACRO PLATE WALL FORM

Acro Plates are mainly manufactured by the heavy raw material such as sheet above 2.5 mm thick and angles size of 45x45x5 mm. The quality raw material being used is of ISI standard & of acceptable quality. The range of the Acro plate is available in ready stock, but with specific specification of any bulk need we can also be provide with minimum delivery period. Punched angle frame provide facility to adjust any plate. Acro Plates manufactured by our company is well accepted product in the Building construction field.

Wedge Pin Anchor Nut

WALLERS

Acrow steel waler provides high accuracy for the panel alignment. Moreover, the slotted end eases the connection to the next panel using Acrow splice.

Size (in mm) Weight

1250 x 200 14.30 Kg

1250 x 230 15.25 Kg

1250 x 300 19.00 Kg

1250 x 350 22.00 Kg

1250 x 400 24.00 Kg

ONHIREONHIREONHIRE


Acro Corner Acro Soldier

Size (in mm) Weight

1250 x 450 25.25 Kg

1250 x 500 27.00 Kg

1250 x 600 34.00 Kg

1250 x 750 40.00 Kg

17

TELESCOPIC SPANS / ACRO SPANS

ONHIREONHIREONHIRE


Adjustable Telescopic Spans Easy method for slab supporting most economical and convenient product. It is ideal to be used as self - supporting runner in shuttering systems. Moreover, Adjustable Beam spans are installed under shuttering plates or floor from panels. Adjustable telescopic span is made out of 2.0 mm thick MS sheet with support of 10 mm dia bar and 40 x40 x 5 mm tee. The perfect Adjustable Telescopic spans are manufactured using high quality Machines and well equipped testing equipment installed in our work shop. Acro span have a standardized size i.e.2.35 x 3.45, 2.4 x 4.1mtr., 2.5 x 2.5 mtr.,

FEATURES

¶ Used for supporting beam bottoms and centering sheet

¶ The adjustable span is assembled with an outer sliding & one inner sliding, in order to provide variable lengths to the span and lock in different positions

¶ A self cleaning device on the collar nut, which automatically clears the thread of concrete & dirt where the nut is rotated thus assuring quick and easy adjustment

¶ Spans are considered an integral structural construction scaffolding components of a construction scaffold & provide support to the entire structure

¶ As per the need they can be adjusted & are extensively used support floor forms during lying of slabs

BOX TYPE MINI SPAN

¶ Box type mini span is alternative method of telescopic span for slab supporting

¶ It is Made of MS Square Pipe 65 x 65 mm and 72 x 72 mm

¶ Available Size : 2 x 2 mtrs. - 26 Kg | 2 x 2.5 mtrs. - 29 Kg


SYSTEM FORMWORK

SYSTEM FORMWORK

Formwork is to be strong enough to withstand the dead and live loads, forces caused by ramming and vibration of concrete and other incidental loads imposed upon it during and after casting of concrete.

The lightweight nature of the components is perhaps the biggest advantage with horizontal panel systems. They can be moved around the site with relative ease, as compared to traditional formwork

System formwork for Wall / Beam / Slab

With it's function accessories, the system formwork allows the construction company to undertake any formwork.

System formwork consist of basic five types of parts

¶ System Formwork Panels ¶ System Joint Clamp

¶ Waller ¶ Tie Rod & Nut

¶ Inside corner joint ¶ Outside corner joint

¶ Filler panels nullifies any error

ADVANTAGES¶ Quick formwork time min 50% reduction in shuttering & de-shuttering time

¶ Same panels can be used in lift shaft, column, wall or climbing work

¶ Forming of retaining walls without special compensation

¶ Easy handling and few accessories for corner forming. Accessories are simple and functional

¶ It is very useful if the same repetitive work like highrise or same casting pattern

¶ High loading capacity up to 300 mm thick slab, permissible concrete 2pressure 40kN/m

19


Shree Hari Engineering is very known in importing wooden beams which are normally called in construction industry as H-Beams (Timber). These beams are manufactured under stringent quality measures. This concrete support H-Beam is a unique introduction to overcome the cumbersome and costly procurement of timber. H-Beams are designed to withstand various loads during construction activities.

The wooden flanges are made of chemically treated, seasoned timber. Using a unique finger jointing method, the webs are manufactured by joining these flanges with boiling water-proof plywood / Timber and thus made as a monolithic timber beam. Both the flange and web is hot processed by wedge technology to make it a composite versatile section.

H-BEAMS ARE AVAILABLE SIZES:

H-20 (20 cms depth)

¶ Lengths vary from 1.8m to 5.9 Mtr for H-20

Timber H-Beam for formwork is used for concrete formwork construction. H20 timber beam is widely applied in slab formwork systems, wall formwork systems, column formwork systems, timber structures, and other temporary bearing structures.

CHARACTERISTICS

¶ Solid flange : Sawed-Pine or Spruce imported from Finland, High quality spruce; High stability

¶ Solid web : Birch or poplar or larch plywood; High durability; High load bearing capacity

¶ Treated by WBP glue exterior used weather & water-proof

¶ Beam ends sealed : Protect from moisture & UV; Reduce damage; Increase service life

¶ With high standardization, universal property, fast operation.

¶ High stiffness, light weight, strong load-carrying capability.

¶ Low cost, recycle resource.

Beam Max Shear Force Max. Bending Moment

H-20 11 KN 5 KN.M

FORMWORK H BEAM

TECHNICAL SPECIFICATION

40mm

200mm

80mm

27mm

SOFT WOOD SAWN TIMBER

(Pine / Sylvester Pine / Spruce)

Soft wood is mainly imported from Russia, Germany and Europe. Soft wood is very strong wood, cheap and easy to work (less tool wear).

Soft Wood is evergreen trees and is a renewable resource; therefore pinewood is cheaper than other varieties of wood and also available in abundance.

SIZES

¶ 2" x 2" ¶ 2" x 3" ¶ 3" x 3" ¶ 4" x 3"

¶ 3" x 1.5" ¶ 9" x 1.25" ¶ 9" x 1.5" ¶ 12" x 1.5"

SOFT WOOD SAWN TIMBER

21

GIRDERS / I BEAM (ISMB)

Heavy duty Girders/ Beams are used to support heavy structures. These are specially used for bridges, Canals, Box culverts and basement construction.

It is made of I beam cross section for strength. ISMB specification for girders is as :

Available Sizes

100 x 50mm x 6 mtr

125 x 65mm x 6 mtr

150 x 75mm x 6 mtr

200 x 100mm x 6 mtr

ONHIREONHIREONHIRE


C-CHANNEL

Horizontal Support like Spans, used in 100X50 mm size. It is a high strength product. Some of the salient features of these channels are Corrosion Resistance, High Strength, Durability, Precise Dimensions and Sturdiness.

SIZES : 100 x 50mm x 6mtr., 150 x 50mm x 6mtr.


ONHIREONHIREONHIRE

AVAILABLEAVAILABLEAVAILABLEALSOALSOALSOHEAVY DUTY BRIDGE CRIB (TRESTLE)

Heavy Duty Bridge Crib System is widely used as staging for heavy floors at higher altitudes, and also serves as scaffolds on certain occasions. Each heavy duty tower has an unmatched capacity of 25 MT and is ideal for handling heavy loads at unusual heights. It also serves as Table Formwork in multi-storied constructions and can be handled as single units up to a height of 5mtr.

Heavy Duty Bridge Crib are mainly used for staging purposes in the construction of flyovers, Buildings and Bridge - Tunnel form work, Small & Big under Pass, Small & Big Culvert.

Angles used 50 x 50 x 5 mm Size

Height : 500mm, 1000mm, 1500mm & 2000 mm

Base : 450 x 450 mm.

Additional supports of MS Angles can be provided, on the standing angles, as per the requirement of the customer.

23

MS PIPE

Ms Pipes are used for manufacturing various scaffolding products like MS Prop, Cuplock Vertical & Ledgers etc. It is also used to build scaffolding structures with Couplers.

We have different size of MS Pipes.

MS Round Pipe 38.00 mm OD



ONHIREONHIREONHIRE



SCAFFOLDING REPAIR & RECONDITIONING

REPAIR & RECONDITIONING

Shree hari Scamain provides scaffold repair and reconditioning of all modular scaffolding systems, Acro Formwork, Span, Shuttering plates, MS Props and full scaffold refurbishment services for all scaffold fittings and accessories.

As with all our services all work is carried out to the very highest standards using only qualified and experienced personnel.

All components are first visually checked for defects before being straightened using a hydraulic tube straightened specifically designed and manufactured by ourselves for the repair of system scaffolding.

Our dedicated scaffold repair and reconditioning facility and division is equipped with skills, knowledge and expertise spanning over two years to return your equipment back to fit for purpose condition. Scaffold export is also available; contact us for more details and information.

BEFORE AFTER

25

ACCESSORIES

SPIGOT / JOINT PIN WEDGE PIN ANCHOR NUT TIE ROD

PROP-NUT WITH HANDLE

JACK NUT PROP SLEEVE SINGLE CLIP

FIX FORGING

COUPLER

40 NB

FIX PLATE

COUPLER

40 NB

SWIVEL PLATE

COUPLER

40 NB

SWIVEL FORGINGCOUPLER

40 NB

JACK CUP NUT GO GO MACHINEGOGO CLAMPCASTER WHEEL

26 www. .comshreehariengineering

OUR GROWTH PARTNERS

¶ A M Construction

¶ Aarti Engineering

¶ Ajay Protech Pvt Ltd

¶ Asian Construction

¶ Bakeri Urban Development Pvt Ltd

¶ BAPS Swaminarayan Temple, Shahibaug

¶ Bhumi Procon Pvt. Ltd.

¶ Bindu Tech Flow Solution Pvt. Ltd.

¶ BPC Project & Infrastructure Ltd.

¶ B. Safal

¶ Buildquik Infrastructure Pvt. Ltd

¶ Chetan Construction Co. Pvt. Ltd.

¶ Diamond Infra

¶ Goyal & Co.

¶ Guru Infracon

¶ H. N. Safal

¶ H. S. Shah & Co.

¶ H. V Infrabuild Pvt. Ltd.

¶ Hari Om Construction

¶ Hi-tech Project Pvt. Ltd.

¶ Hrishikesh Reality LLP

¶ ICC Project Pvt. Ltd.

¶ Innovative Engineers

¶ Jalaram Project Pvt Ltd

¶ J. Kumar Infra Project

¶ JMC Co.

¶ Kalp Construction

¶ Kalthia Group

¶ Katira Construction

¶ M K Construction

¶ Maheshwari Engineers

¶ Malani Construction Co.

¶ Milecon Engineering Private Ltd

¶ Multivision Pvt Ltd

¶ Nami Construction

¶ Nila Infrastructure Pvt. Ltd.

¶ Parshwanath Corporation

¶ Parth Construction

¶ Perfect Brothers

¶ R. J Parikh Construction Pvt. Ltd.

¶ Radhekrushna Construction

¶ Rhythm Infrastructures Pvt. Ltd.

¶ Rushikesh Reality Pvt. Ltd.

¶ S M Construction

¶ Sanghi Industries Ltd

¶ Sarjan Construction Pvt. Ltd.

¶ Sarnar Buildtech Pvt. Ltd.

¶ Shanti Construction Co.

¶ Shivdhara Construction Pvt Ltd

¶ Shree Digvijay Cement Co. Ltd.

¶ Shree Infrastructure

¶ Siddharth Associates

¶ Siddhi Construction Co.

¶ Simplex Infrastructures Ltd.

¶ Standard Buildcon

¶ Suvijay Buildcon Pvt. Ltd.

¶ Symphony Ltd

¶ Teracon Project

¶ Tirupati Sarjan Ltd.

¶ Trine Infracon LLP

¶ True Value Buildtech LLP

¶ Vasudha Corporation Pvt. Ltd.

¶ World Con

¶ Yogi Construction

27

SHREE HARI ENGINEERING82-83, New Ahmedabad Industrial Estate, B/h. Zydus Research Center,Ahmedabad - Bavla Highway, Moraiya, Ahmedabad - 382213. Gujarat - India.

+91 79 6611 8015 | +91 98795 72448 | +91 99099 51593 | +91 98256 97929

[email protected] | www.shreehariengineering.com

STEEL SHUTTERING AND SCAFFOLDING - TradeIndia

Documents