Call your Account Representative for floor stock availability or go on-line at www.independencetube.com. ASTM A252 Independence Tube has been producing square and rectangular products for over thirty-five years. Our experience with these products has led to the creation of our round and pipe size line. Independence Tube can now supply your pipe piling needs with the same excellence. Independence Tube is now manufacturing ERW Pipe Piling to ASTM A252 in Grades 1, 2, and 3. Pipe Piling is produced from 6.625" O.D. to 12.750" O.D. in walls from .188" to .625" up to 78 feet long. The most popular Pipe Piling sizes of 10.75" OD and 12.75" OD are produced in our Decatur, Alabama Division on a 4-week production cycle for your immediate needs. When it comes to the versatility of design- ing with tube and pipe products, designers, architects, and engineers specify Independence Tube. We have expanded our product line to expand your possibilities. Grade 1 Grade 2 Grade 3 Tensile strength, min. psi 50,000 60,000 66,000 Yield strength, min. psi. 30,000 35,000 45,000 Elongation in 2 in. % 30 25 20 WEIGHT Each length of pipe shall not vary more than 15% over or 5% under its theoretical weight, calculated using its length and its weight per unit length. WALL THICKNESS TOLERANCE Wall thickness at any point shall not be more than 12.5% under the specified nominal wall thickness. OUTSIDE DIMENSION TOLERANCES Outside diameter shall not vary more than ±1% From the specified outside diameter.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Call your Account Representative for floor stock availability or go on-line at www.independencetube.com.
ASTM A252
Independence Tube has been producing square and rectangular products for over thirty-five years. Our experience with these products has led to the creation of our round and pipe size line. Independence Tube can now supply your pipe piling needs with the same excellence.
Independence Tube is now manufacturing ERW Pipe Piling to ASTM A252 in Grades 1, 2, and 3. Pipe Piling is produced from 6.625" O.D. to 12.750" O.D. in walls from .188" to .625" up to 78 feet long.
The most popular Pipe Piling sizes of 10.75" OD and 12.75" OD are produced in our Decatur, Alabama Division on a 4-week production cycle for your immediate needs.
When it comes to the versatility of design-ing with tube and pipe products, designers, architects, and engineers specify Independence Tube. We have expanded our product line to expand your possibilities.
Each length of pipe shall not vary more than 15% over or 5% under its theoretical weight, calculated using its length and its weight per unit length.
WALL THICKNESS TOLERANCE
Wall thickness at any point shall not be more than 12.5% under the specified nominal wall thickness.
OUTSIDE DIMENSION TOLERANCES
Outside diameter shall not vary more than ±1% From the specified outside diameter.
The information presented in this publication has been prepared in accordance with recognized engineering principles and is for general information only. While it is believed to be accurate, this information should not be used or relied upon for any specific application without competent professional examination and verifica-tion of its accuracy, suitability and applicability by a licensed professional engineer, designer or architect. The publication of the material contained herein is not intended as a representation or warranty on the part of "Independence Tube Corporation" or of any other person named herein, that this information is suitable for any general or particular use or of freedom from infringement of any patent or patents. Anyone making
use of this information assumes all liability arising from such use. Caution must be exercised when relying upon specifications and codes developed by other bodies and incorporated by reference herein since such material may be modified or amended from time to time subsequent to the printing of this publication. Inde-pendence Tube Corporation bears no responsibility for such material other than to refer to it and incorporate it by reference at the time of the initial publication of this edition. To the best of our knowledge, all information contained herein is correct at the time of publication. Independence Tube Corporation does not assume any responsibility for errors or oversights resulting from the use of the information contained herein.
12.750 inch Outside Diameter - Physical Properties