Page 1 of 2 EDS1133-002 Important Safety Notice It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fit for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should be checked periodically to ensure correct tightness. DO NOT USE POWER TOOLS ON THESE PRODUCTS Technical Data: Epoxy Coated Steel Enclosure Specifications and Dimensions Earth Studs Included IP65 to EN60 529 NEMA4 (When Fitted & Sealed) Top & Bottom Gland Plates Fixing Brackets Available Galvanised Back Plate Included Strong Steel (Powder Epoxy Coated) Body and door RAL7035 (textured finish) Mounting plate in galvanized zinc steel sheet Body and door manufactured in 1.2 to 1.5mm sheet steel Gland plate manufactured in 2.0mm to 2.5mm sheet steel Enclosure coated with standard cycle thermosetting epoxy polyester powder STBKEYLOCK Dimensions: L1 L2 L3 B1 H1 OD 50mm 32.5mm 50mm 20mm 26.7mm 22mm
2
Embed
Steel Enclosure Data - Europa Components€¦ · Technical Data: Epoxy Coated Steel Enclosure Specifi cations and Dimensions Earth Studs Included IP65 to EN60 529 NEMA4 (When Fitted
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1 of 2 EDS1133-002
Important Safety Notice It is the responsibility of the person installing the electrical equipment to ensure that the installation meets the requirements of the IET wiring regulations and is therefore ‘fit for purpose’. Factors such as correct selection of components, cable sizing, protective devices and Earth bonding are all critical and should be checked prior to full testing and power-up. Any other regulations applicable to the equipment being installed such as the Machinery Directive and current health and safety legislation must also be adhered to. All connections (including factory made) must be checked for the correct tightness prior to commissioning of the electrical installation. All connections should be checked periodically to ensure correct tightness.
DO NOT USE POWER TOOLS ON THESE PRODUCTS
Important
Technical Data: Epoxy Coated Steel Enclosure Specifi cations and Dimensions
Earth Studs Included
IP65 to EN60 529 NEMA4 (When Fitted & Sealed)
Top & Bottom Gland Plates
Fixing Brackets Available
Galvanised Back Plate Included
Strong Steel (Powder Epoxy Coated)
Body and door RAL7035 (textured fi nish)
Mounting plate in galvanized zinc steel sheet
Body and door manufactured in 1.2 to 1.5mm sheet steel
Gland plate manufactured in 2.0mm to 2.5mm sheet steel
Enclosure coated with standard cycle thermosetting epoxy polyester powderSTBKEYLOCK Dimensions: