STB Diagrams UG TV 0310

8/13/2019 STB Diagrams UG TV 0310

1/13

DIGITAL SET-TOPBOX (STB) DIAGRAMS

Digital Set-Top Box (STB) Diagrams 27Continued on Next Page


2/13

28

1 Message Indicator Indicates a message from EATEL is waiting when blinking or illuminated.To access the message, press the INFO button on your remote.

2 LED Display Displays the selected channel number and time of day.

3 Guide Accesses on-screen services such as the on-screen guide and Pay Per View.

4 Info Displays a description of the selected programavailable from theon-screen guide and while viewing a program.

5 Exit Exits menus, on-screen guide, and program information.

6 Settings Accesses the Settings menu.

7 Smart Card Slot* Allows smart card access.

8 Select Accesses your on-screen selection.

9 CH+ and CH- Scrolls up and down through the channels.

10 VOL+ and VOL- Increases and decreases volume.

11 Power Provides power to the STB. The light above the Power button illuminateswhen the power is on.

*If available. Contact EATEL for more information.

Digital Set-Top Box (STB) Diagrams

1850 Front Panel Overview


3/13

29Continued on Next Page

1 Serial Number Located in the left corner of the bar code. EATEL may ask for this numberif your system requires troubleshooting.

2 IR Connect to optional VCR Commander service.

3 Video Out Connect to video input of TV or VCR (standard definition).

4 Audio Out Connect to left/right (L/R) audio inputs of a stereo receiver or a TVwith stereo sound.

5 Cable Out Connect to cable input of TV or VCR (standard definition).

6 Cable In Connect to coaxial cable coming from the wall.

7 Bypass* Connect the optional RF Bypass module. This module allows viewing one channelwhile recording another.

8 AC Switched Outlet Connect the AC power cord from another device, such as a TV.

9 AC Power Input Connect the STB to an AC electrical outlet using the cord provided.


1850 Back Panel Overview


4/13

30

1 Power Provides power to the STB.

2 Video and Connects to video and left/right (L/R) audio outputs of an external Audio Input device to deliver the video and audio to a TV or other device.

3 List Displays the list of recorded programs.


5 Info Displays a description of the selected programavailable from the on-screenguide and while viewing a program.


7 IR Sensor Receives the infrared signal from the remote control.

8 LED Display Displays the selected channel number and time of day. The LED also displays thefollowing:> Message> Power> Record

9 VOL+ and VOL - Increases and decreases volume.



12 Smart Card Slot* Allows smart card access (if available).

13 USB Port* Allows connection to external equipment, such as a keyboard.

* If available. Contact EATEL for more information.


8300 Front Panel Overview


5/13


1 Cable In Connect to the coaxial cable coming from the wall.

2 Cable Out Connect a coaxial cable to Cable Out to send analog audio and video signals to aTV or VCR. These signals are SDTV video and stereo audio.

3 Audio Out (L and R) Connect RCA cables to Audio Out to send analog audio signals (left and right) to astereo receiver or TV with stereo outputs.

4 Video Out Connect to video input of a TV or VCR.

5 Digital Audio Output Connect an RCA cable to send a digital audio signal to a surround-sound receiveror other digital audio device.

6 Secondary Video Connect to either a VCR for archiving saved content from the 8300HD or toand Audio Out another set of inputs (composite) on your HDTV.

7 S-Video Out Connect an S-Video cable to send an S-Video signal to your TV or VCR. This signalis standard definition, but higher quality than other SDTV connections.

8 IR (This connector reserved for future use.)

9 SATA Connect to an external Serial ATA (SATA) hard disk drive for expanded recordingcapability. Please check with EATEL for a list of approved hard drive models for

use with the 8300.

10 AC Outlet Connect the AC power cord from another device, such as a TV.


8300 Back Panel Overview


6/13

1 Message Indicator Indicates a message from EATEL is waiting when blinking or illuminated.To access the message, press the INFO button on your remote.

2 LED Display Displays the selected channel number and time of day.


4 Info Displays a description of the selected programavailable from theon-screen guide and while viewing a program.

5 Bypass* Illuminates when the optional bypass feature is on.



8 Settings Accesses the Settings menu.

9 Smart Card Slot* Allows smart card access (if available).



12 VOL+ and VOL- Increases and decreases volume.

13 Power Provides power to the STB. The light above the Power button illuminateswhen the power is on.



3250HD Front Panel Overview

Safety TipKeep the top of the STB box free of all objects and electronic devices, including your TV.

32


7/13

1 Serial Number Located in the left corner of the bar code. EATEL may ask for this number if yoursystem requires troubleshooting.

2 1394 FireWire* Connect to optional 1394-equipped (FireWire) devices. This connector is reservedfor future use and may not be available on all 3250HD models.

3 Optical Audio Out* Connect an optical cable to send a digital audio signal to a surround-soundreceived or the digital audio device. This connector may not be availableon all STB models.

4 DVI* Connect to the DVI (Digital Video Interface) input port on your HDTV.This port provides digital video signals to the HDTV.

5 IR* Connect the IR Blaster cable to use with the optional VCR Commanderservice.

6 S-Video Out Connect an S-Video cable to send an S-Video signal to your TV or VCR. This signalis standard definition, but higher quality than other SDTV connections.

7 YPbPr Out Connect the HDTV (Y, Pb, Pr) component output ports to the HDTV inputon your HDTV. You must use these ports to provide HDTV signals to asurround-sound receiver or other digital audio device.

8 Digital Audio Out Connect an RCA cable to send a digital audio signal to a surround-sound receiveror other digital audio device.

9 Video & Audio Out Connect an RCA cable to Video Out and Left/Right Audio Out to sendanalog video and audio signals to a standard VCR. This signal is SDTV.

10 Cable Out Connect a coaxial cable to Cable Out to send analog audio and videosignals to a TV or VCR. These signals are SDTV video with mono audio.

11 Audio Out (L and R) Connect RCA cables to Audio Out to send analog audio signals (left and right) to astereo receiver or a TV with stereo outputs.

12 Cable In Connect to the coaxial cable coming from the wall.

13 Bypass* Connect an optional RF Bypass module to the set-top. This module allows viewingone channel while recording another.

14 AC Switched Outlet Connect the AC power cord from another device, such as a TV.



3250HD Back Panel Overview



8/13

1 Power Provides power to the STB.

2 Video and Connects to video and left/right (L/R) audio outputs of an external

Audio Input device to deliver the audio and video to a TV or other device.


4 Exit Exits menus, the on-screen guide, and program information.

5 Info Displays a description of the selected programavailable from the on-screenguide and while viewing a program.

6 Guide Accesses on-screen services such as the on-screen guide, video-on-demand,or Pay Per View.


8 LED Display Displays the selected channel number and time of day. The LED also displays thefollowing:>Message>HDTV>Power>Output Resolution (1080i, 720p, 480p, 480i)>Record>AUTO Automatically outputs native scan

rates that your TV can accept

9 VOL + and VOL - Increases and decreases volume.

10 CH+ and CH - Scrolls up and down through the channels.






8300HD Front Panel Overview

34


9/13

1 Cable in Connects to the coaxial cable coming from the wall.

2 Cable Out Connects a coaxial cable to Cable Out to send analog audio and video signals to a

TV or VCR. These signals are SDTV video and stereo audio.

3 PrPbY/V Connects the 8300HD (when in HD mode) to the component video input (YPrPb)on the HDTV. When the 8300HD is configured for SD mode, the Y/V portion of thecomponent video output connects to the composite video input of an HDTV or SDTV.See required connections for an HDTV or required connections for an SDTV on pages4057 for complete details.

4 Digital Audio Output Connect an RCA cable to send a digital audio signal to a surround-sound receiveror other digital audio device.

5 Secondary Video Connect to either a VCR for archiving saved content from the and Audio Out 8300HD or to another set of inputs (composite) on your HDTV.

6 Audio Out (L and R) Connect RCA cables to Audio Out to send analog audio signals (left and right) to astereo receiver or a TV with stereo outputs.

7 Optical Audio Connect an optical cable to send a digital audio signal to Output surround-sound receiver or other digital audio device.

8 S-Video Out Connect an S-Video cable to send an S-Video signal to your TV or VCR. This signalis standard definition but higher quality than other SDTV connections.

9 HDMI Connect the HDTV HDMI connector to the HDMI port. HDMI supports both digitalaudio and video. May be used to connect to a DVI interface using an adaptor.

10 IR (This connector reserved for future use.)

11 SATA Connect to an external Serial ATA (SATA) hard disk drive for expanded recordingcapability. Please check with EATEL for a list of approved hard drive models for usewith the 8300HD.

12 1394 FireWire Connect to display devices equipped with a 1394 (FireWire) input. This connector is

reserved for future use and may not be available on all 8300HD models.

13 AC Outlet Connect the AC power cord from another device, such as a TV.


8300HD Back Panel Overview



10/13

4250HDC Front Panel Overview


1 Power Turns the set-top on and off.

2 VOL + and VOL - Increases and decreases the volume.

3 CH+ and CH - Scrolls up and down through the channels.

4 Select Provides access to your on-screen selection.

. 5 IR Sensor Receives the infrared signal from the remote control.

6 LED Display Displays the selected channel number and time of day. The LED also displaysthe following:>Message>HDTV>Power>Output Resolution (1080i, 720p, 480p, 480i)>AUTO Automatically outputs native scan rates that your TV can accept

7 Guide Accesses on-screen services, such as the on-screen guide, video-on-demand,or pay-per-view.

8 Info Displays a description of the selected program. This button is available fromthe on-screen guide and while viewing a program.


10 Settings Provides access to the Settings menu.


13 USB Port* Connects to external equipment, such as a keyboard or mouse.


36


11/13

4250HDC Back Panel Overview

1 Cable In Connects to a coaxial cable that delivers the signal from your service provider.

2 Cable Out Connects to a coaxial cable that sends analog audio and video signals to a TVor VCR. These signals are standard-definition TV (SDTV) video and stereo audio.

3 HDTV Connects to the component video input (YPbPr) on the HDTV, when in HD mode.

4 Digital Audio Out Connects to an RCA cable that sends a digital audio signal to a surround-soundreceiver or other digital audio device.

. 5 Out 2 (Secondary Video/Audio Out) Connects to either a VCR or to another set of inputs (composite) on your TV.

6 Audio Out Connects to RCA cables that send analog audio signals (left and right) (Left and Right) to the stereo inputs on a TV.

7 S-Video Out Connects to an S-Video cable that sends an S-Video signal to your TV or VCR.This signal is standard definition, but higher quality than other SDTV connections.

8 IR Connector reserved for future use.

9 Optical Audio Connects to an optical cable that sends a digital audio signal to aOutput surround-sound receiver or other digital audio device.

10 Multi-Stream CableCARD Installed by your service provider.

11 HDMI Connects an HDMI cable to the HDMI input of an HDTV. HDMI supportsboth digital audio and video. May be used to connect to a DVI interface usingan HDMI-to-DVI adaptor for video and separate audio connections. Any of thefollowing audio connections may be used: Digital Audio Out (4); Audio Out:Left and Right (6); or Optical Audio Output (9).

12 USB Connects to external USB devices such as a keyboard or a mouse.

13 1394 Connects to display devices that are equipped with a 1394 input.

14 AC Outlet Connects to the AC power cord from another device, such as a TV.

15 AC Power Input Connects to the power cord to deliver power to the set-top.

Continued on Next Page 37


12/13

8300HDC Front Panel Overview

38 Digital Set-Top Box (STB) Diagrams

1 Power Turns the STB on and off.

2 Video and Connects to video and left/right (L/R) audio outputs of an external device Audio Input to deliver audio and video to a TV or other device.



5 Info Displays a description of the selected program. This button is available fromthe on-screen guide and while viewing a program.

6 Guide Accesses on-screen services, such as the on-screen guide, video-on-demand,

or pay-per-view.


8 LED Display Displays the selected channel number and time of day. The LED also displaysthe following:>Message>HDTV>Power>Output Resolution (1080i, 720p, 480p, 480i)>RECORD

>AUTO Automatically outputs native scan rates that your TV can accept

9 VOL+ and VOL- Increases and decreases the volume.

10 CH+ and CH- Scrolls up and down through the channels

11 Select Provides access to your on-screen selection.

12 USB Port* Connects to external equipment, such as a keyboard or mouse.



13/13

8300HDC Back Panel Overview

1 Cable In Connects to the coaxial cable coming from the wall.

2 Cable Out Connects to a coaxial cable that sends analog audio and video signals to a TVor VCR. These signals are standard-definition TV (SDTV) video and stereo audio.

3 HDTV Connects to the component video input (YPbPr) on the HDTV, when in HD mode.When in SD mode, the Y/V portion of the component video output connects to thecomposite video input of a TV.

4 Digital Audio Out Connects to an RCA cable that sends a digital audio signal to a surround-soundreceiver or other digital audio device.

5 Out 2 (Secondary Connects to either a VCR for archiving saved content from the DVR or connects

Video/Audio Out) to another set of inputs (composite) on your TV.

6 Audio Out Connects to RCA cables that send analog audio signals (left and right) (Left and Right) to the stereo inputs on a TV.

7 Optical Audio Connects to an optical cable that sends a digital audio signal to a surround-sound Output receiver or other digital audio device.

8 S-Video Out Connects to an S-Video cable that sends an S-Video signal to your TV or VCR.This signal is standard definition, but higher quality than other SDTV connections.

9 IR Connector reserved for future use.

10 HDMI Connects an HDMI cable to the HDMI input of an HDTV. HDMI supportsboth digital audio and video. May be used to connect to a DVI interface usingan HDMI-to-DVI adaptor for video and separate audio connections. Any of thefollowing audio connections may be used: Digital Audio Out (4); Audio Out:Left and Right (6); or Optical Audio Output (7).

11 M-Card Interface Installed by your service provider.

12 SATA Connect to an external Serial ATA (eSATA) hard disk drive for expanded recording

capability. Please check with EATEL for a list of approved hard drive models for usewith the 8300HDC.

13 1394 Firewire Connects to display devices that are equipped with a 1394 input.

14 AC Outlet Connects to the AC power cord from another device, such as a TV.

15 AC Power Input Connects to the power cord to deliver power to the DVR.

STB Diagrams UG TV 0310

Documents