International Editioral Board R.C. Bradt, Mackay School of Mines, University of Nevada-Reno, Reno, Nevada 89557-0047 USA D.P.H. Hasselman, Dept. of Materials Engineering, Virginia Polytechnic Institute and State University, Blacksburg, Virginia 24061, USA D. Munz, Institut fiir Materialforschung II, Kernforschungszentrum Karlsruhe 75 Karlsruhe 1, GERMANY M. Sakai, Dept. of Materials Science, Toyohashi University of Technology, Toyohashi 441 JAPAN V.Ya. Shevchenko, High-Tech Ceramics Research Center, Academy of Science of The USSR Ozernaya 48, Moscow 119361, USSR Organizing Committee N. Soga, Dept. of Industrial Chemistry, Kyoto University, Kyoto 606, JAPAN O. Kamigaito, Toyota CRDL, Aichi-Gun 480-11, JAPAN K. Funatani, Japan Fine Ceramics Centre, Nagoya 456, JAPAN Y. Hamano, Kyocera Corporation, Kyoto 607, JAPAN Y. Kagawa, Institute of Industrial Science, The University of Tokyo, Minato-ku 106, JAPAN T. Kishi, Research Centre for Advanced Science and Technology, The University of Tokyo Megro-ku 153, JAPAN M. Matsui, Analysis and Properties Research Lab., NGK Insulators, Ltd., Nagoya 467 JAPAN K. Niihara, The Institute of Scientific and Industrial Research, Osaka University Ibaraki 567, J APAN M. Sakai, Dept. of Materials Science, Toyohashi University of Technology, Toyohashi 441 JAPAN M. Takatsu, Dept. of Materials Science and Engineering, Nagoya Institute of Technology Nagoya 466, JAPAN S. Wada, Toyota CRDL, Aichi-Gun 480-11, JAPAN E. Yasuda, Tokyo Institute of Technology, Yokohama 227, JAPAN 639
15
Embed
State University, Blacksburg, Virginia 24061, USA978-1-4615-3348-1/1.pdf · M. Matsui, Analysis and Properties Research Lab., NGK Insulators, Ltd., Nagoya 467 JAPAN ... H. Kawamoto,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
International Editioral Board
R.C. Bradt, Mackay School of Mines, University of Nevada-Reno, Reno, Nevada 89557-0047USA
D.P.H. Hasselman, Dept. of Materials Engineering, Virginia Polytechnic Institute andState University, Blacksburg, Virginia 24061, USA
D. Munz, Institut fiir Materialforschung II, Kernforschungszentrum Karlsruhe75 Karlsruhe 1, GERMANY
M. Sakai, Dept. of Materials Science, Toyohashi University of Technology, Toyohashi 441JAPAN
V.Ya. Shevchenko, High-Tech Ceramics Research Center, Academy of Science of The USSROzernaya 48, Moscow 119361, USSR
Organizing Committee
N. Soga, Dept. of Industrial Chemistry, Kyoto University, Kyoto 606, JAPAN
O. Kamigaito, Toyota CRDL, Aichi-Gun 480-11, JAPAN
K. Funatani, Japan Fine Ceramics Centre, Nagoya 456, JAPAN
Y. Hamano, Kyocera Corporation, Kyoto 607, JAPAN
Y. Kagawa, Institute of Industrial Science, The University of Tokyo, Minato-ku 106, JAPAN
T. Kishi, Research Centre for Advanced Science and Technology, The University of TokyoMegro-ku 153, JAPAN
M. Matsui, Analysis and Properties Research Lab., NGK Insulators, Ltd., Nagoya 467JAPAN
K. Niihara, The Institute of Scientific and Industrial Research, Osaka UniversityIbaraki 567, JAPAN
M. Sakai, Dept. of Materials Science, Toyohashi University of Technology, Toyohashi 441JAPAN
M. Takatsu, Dept. of Materials Science and Engineering, Nagoya Institute of TechnologyNagoya 466, JAPAN
S. Wada, Toyota CRDL, Aichi-Gun 480-11, JAPAN
E. Yasuda, Tokyo Institute of Technology, Yokohama 227, JAPAN
639
Session Chairs
K. Ahlborn, Central Research and Deveropment, Carl Freudenberg, 6940 WeinheimGERMANY
Y. Akimune, Central Engineering Lab., Nissan Motor Co. Ltd., Yokosuka 237, JAPAN
R.C. Bradt, Mackay School of Mines, University of Nevada-Reno, Reno, Nevada 89557-0047USA
J.T. Dickinson, Dept. of Physics, Washington State University, Pullman, WA 99164-2814USA
G. Fantozzi, INSA, GEMPPM, U.A. 341, Lyon, FRANCE
K. Funatani, Japan Fine Ceramics Centre, Nagoya 456, JAPAN
D.P.H. Hasselman, Dept. of Materials Engineering, Virginia Polytechnic Institute andState University, Blacksburg, Virginia 24061, USA
K. Hirao, Dept. of Industrial Chemistry, Kyoto University, Kyoto 606, JAPAN
Y. Inomata, National Institute for Research in Inorganic Materials, Tsukuba 305, JAPAN
M.G. Jenkins, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-6064, USA
Y. Kagawa, Institute of Industrial Science, The University of Tokyo, Minato-ku 106, JAPAN
M. Kaji, Central Research Lab., Kyocera Corporation, Kokubu 899-43, JAPAN
T. Kishi, Research Centre for Advanced Science and Technology, The University of TokyoMegro-ku 153, JAPAN
Y-W. Mai, Center fo Advanced Materials Technology, University of SydneySydney, N.S.W. 2006, AUSTRALIA
M. Matsui, Analysis and Properties Research Lab., NGK Insulators, Ltd., Nagoya 467JAPAN
Y. Matsuo, Dept. of Inorganic Materials and Engineering, Tokyo Institute of TechnologyTokyo 152, JAPAN
N. Miyata, Dept. of Industrial Chemistry, Facal. of Engineering, Kyoto UniversitySakyo-ku 606, JAPAN
D. Munz, Institut fiir Materialforschung II, Kernforschungszentrum Karlsruhe75 Karlsruhe 1, GERMANY
K. Niihara, The Institute of Scientific and Industrial Research, Osaka UniversityIbaraki 567, JAPAN
T. Nishida, Dept. of Chemistry and Materials Technology, Kyoto Institute of TechnologySakyo-ku 606, JAPAN
J.E. Ritter, Dept. of Mechanical Engineering, University of MasachusettsAmherst, MA 01003, USA
640
J.A. Salem, NASA Lewis Research Center, Cleveland, Ohio 44135, USA
V.Ya. Shevchenko, High-Tech Ceramics Research Center, Academy of Science of The USSROzernaya 48, Moscow 119361, USSR
R.W. Steinbrech, Institute for Reactor Materials, Research Center Jiilich5170 Jiilich, GERMANY
M.V. Swain, Dept. of Mechanical Engineering, University of SydneyN.S.W., Sydney 2006, AUSTRALIA
Y. Tajima, R&D Center, NGK Spark Plug Co., Ltd., Komaki 485, JAPAN
K.W. White, Dept. of Mechanical Engineering, University of HoustonHouston, TX 77204-4792, USA
D.S. Wilkinson, Dept. of Materials Science and Engineering, McMaster UniversityHamilton, Ontario L8S 4L7, CANADA
641
Authors
W.F. Adler, General Research Corporation, Santa Barbara, CA 93111, USA
K. Ahlborn, Central Research and Deveropment, Carl Freudenberg, 6940 WeinheimGERMANY
S. Akada, Asahi Glass Co., Ltd., JAPAN
T. Akiba, Central Engineering Lab., Nissan Motor Co. Ltd., Yokosuka 237, JAPAN
Y. Akimune, Central Engineering Lab., Nissan Motor Co. Ltd., Yokosuka 237, JAPAN
H. Awaji, Japan Fine Ceramics Centre, Nagoya 456, JAPAN
S. Baik, Dept. of Materials Science and Engineering, Pohang Institute of Scienceand Technology Pohang 790-600, KOREA
S.M. Barinov, High-Tech Ceramics Scientific Research Center, Academy ofScience of The USSR, Ozernaya 48, Moscow 119361, USSR
R.C. Bradt, Mackay School of Mines, University of Nevada-Reno, Reno, Nevada89557-0047, USA
J.H.A. Bressers, Institute for Advanced Materials, Joint Research Center - CEC1755 ZG Petten, THE NETHERLANDS
C.Y. Cha, Philips Display Components Company, Ann Arbor, MI 48106-0963, USA
D. Chakraborty, Central Glass and Ceramic Research Institute, Calcutta 700032INDIA
S. Chandrasekar, School of Industrial Engineering, Purdue UniversityWest Lafayette, IN 47907, USA
Y.M. Chen, School of Industrial Engineering, Purdue University, West LafayetteIN 47907, USA
J-L. Chermant, Laboratoire D'etudes et de Recherches Sur les Materiaux, LERMATURA CNRS 1317, ISMRa, 14050 CAEN Cedex, FRANCE
S.R. Choi, Cleveland State University, Cleveland, Ohio 44115, USA
T-J. Chuang, Ceramics Division, National Institute of Standards and TechnologyGaithersburg, MD 20899, USA
643
A. Chulya, Cleveland state University, Cleveland, Ohio 44115, USA
B. Cotterell, Center for Advanced Materials Technology, University of SydneySydney, N.S.W. 2006, AUSTRALIA
S.K. Datta, Central Glass and Ceramic Research Institute, Calcutta 700032, INDIA
J.T. Dickinson, Dept. of Physics, Washington State University, PullmanWA 99164-2814, USA
K.Y. Donaldson, Dept. of Materials Engineering, Virginia Polytechnic Instituteand State University, Blacksburg, Virginia 24061, USA
K. Duan, Center for Advanced Materials Technology, University of Sydney, SydneyN.S.W. 2006, AUSTRALIA
S.N. Dub, Institute for Superhard Materials of The Ukrainian Academy of Science2 Avtozavodskaya St., 254153 Kiev, USSR
M. Elices, Dept. of Materials Science, Polytechnic University of Madrid28040- Madrid, SPAIN
G. Fantozzi, INSA, GEMPPM, U.A. 341, Lyon, FRANCE
T.N. Farris, School of Aeronautics and Astronautics, Purdue UniversityWest Lafayette, IN 47907, USA
M.K. Ferber, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-6064, USA
T. FeU, Institut fiir Materialforschung II, Kernforschungszentrum Karlsruhe75 Karlsruhe 1, GERMANY
P. Fourvel, SEP, VERNON 2700, FRANCE
S. Fukui, Faculty of Mechanical Engineering, Technical college of TakamatsuTakamatsu 761 JAPAN
K. Funatani, Japan Fine Ceramics Centre, Nagoya 456, JAPAN
Y. Furuse, Engineering Research Center, Tokyo Electric Power Co., Inc.Chofu 182, JAPAN
Y-C. Gao, Center fo Advanced Materials Technology, University of SydneySydney, N.S.W. 2006, AUSTRALIA
A. Ghosh, Philips Display Components Company, Ann Arbor, MI 48106-0963, USA
M. Gomina, Laboratoire D'etudes et de Recherches Sur les Materiaux, LERMATURA CNRS 1317, ISMRa, 14050 CAEN Cedex, FRANCE
J.R. Gong, Dept. of Materials Science and Engineering, Tsinghua UniversityBeijing 100084, CRINA
644
Z.D. Guan, Dept. of Materials Science and Engineering, Tsinghua UniversityBeijing 100084, CHINA
L. Guazzone, Dept. of Mechanical Engineering, University of HoustonHouston, TX 77204-4792, USA
D.P.H. Hasselman, Dept. of Materials Engineering, Virginia Polytechnic Instituteand State University, Blacksburg, Virginia 24061, USA
H. Hatta, The Institute of Space and Astrnautical Science, Sagamihara 229, JAPAN
A. Hattori, Dept. of Materials Science and Engineering, Nagoya Institute ofTechnology, Nagoya 466, JAPAN
J.C. Hay, Dept. of Mechanical Engineering, University of HoustonHouston, TX 77204-4792, USA
S. Hayashi, Structure and Strength Dept., Research Institute, Ishikawajima-HarimaHeavy Industries Co., Ltd., Koto-ku 135, JAPAN
K. Hirao, Dept. of Industrial Chemistry, Kyoto University, Kyoto 606, JAPAN
W.S. Hong, Institute for Defense Analyses, Alexandria, Virginia 22311-1772, USA
X. Hu, Center for Advanced Materials Technology, University of SydneySydney, N.S.W. 2006, AUSTRALIA
Y. Ikuhara, Japan Fine Ceramics Centre, Nagoya 456, JAPAN
S. Ito, Government Industrial Research Institute- Nagoya, Nagoya 462, JAPAN
A.D. Izotov, Kurnakov Institute of General and Inorganic Chemistry, Academy ofScience of The USSR, 117907, GSP-1 Moscow B-71, Leninsky Pr.31, USSR
M.G. Jenkins, Oak Ridge National Laboratory, Oak Ridge, Tennessee 37831-6064USA
L.C. Jensen, Dept. of Physics, Washington State University, PullmanWA 99164-2814, USA
D.C. Jiang, Dept. of Materials Science and Engineering, Tsinghua UniversityBeijing 100084, CHINA
H. Jinno, Dept. of Chemistry, Sophia University, Tokyo, JAPAN
Y. Kagawa, Institute of Industrial Science, The University of TokyoMinato-ku 106, JAPAN
M. Kaji, Central Research Lab., Kyocera Corporation, kokubu 899-43, JAPAN
I. Kameyama, Dept. of Chemistry and Materials Technology, Kyoto Institute ofTechnology, Sakyo-ku 606, JAPAN
645
A. Kamiya, Government Industrial Research Institute- Nagoya, Nagoya 462, JAPAN
N. Kamiya, Toyota CRDL, Aichi-Gun 480-11, JAPAN
W. Kanematsu, Government Industrial Research Institute- Nagoya, Nagoya 462, JAPAN
K. Kawaguchi, Research and Development Division, Sumitomo Metal Industries, Ltd.Amagasaki 660, JAPAN
H. Kawamoto, Higashifuji Technical Center, Toyota Motor Corp., Susono 410-11JAPAN
D. Kervades, Laboratoire D'etudes et de Recherches Sur les MateriauxLERMAT, URA CNRS 1317, ISMRa, 14050 CAEN Cedex, FRANCE
S. Kimura, Dept. of Inorganic Materials, Tokyo Institute of TechnologyMegro-ku 152, JAPAN
M. Kinoshita, Government Industrial Research Institute- Osaka, Osaka 563, JAPAN
T. Kishi, Research Centre for Advanced Science and Technology, The University ofTokyo, Megro-ku 153, JAPAN
H. Kishimoto, Dept. of Mechanical System Engineering, Toyota TechnologicalInstitute, Nagoya 468, JAPAN
K. Kitakami, Canon Research Center, Atsugi, JAPAN
H.N. Ko, Nakanihon Automotive College, Kamo-gun, Gifu 505, JAPAN
A.S. Kobayashi, Dept. of Mechanical Engineering, University of WashingtonSeattle, Washington 98195, USA
T. Kobayashi, Dept. of Production Systems Engineering, Toyohashi University ofTechnology, Toyohashi 441, JAPAN
Y. Kodama, Government Industorial Research Institute- Nagoya, Nagoya 462, JAPAN
Y. Kogo, Materials and Electric device Laboratory, Mitsubishi ElectricCorporation, Sagamihara 229, JAPAN
N. Kohler, Fachhochschule Rhineland-Pfalz, Koblenz, GERMANY
A. Kokaji, Central Research Lab., Kyocera Corporation, kokubu 899-43, JAPAN
K. Kubo, Government Industrial Research Institute- Nagoya, Nagoya 462, JAPAN
S.C. Langford, Dept. of Physics, Washington State University, PullmanWA 99164-2814, USA
V.B. Lazarev, Kurnakov Institute of General and Inorganic Chemistry, Academy ofScience of The USSR, 117907, GSP-1 Moscow B-71, Leninsky Pr.31, USSR
S.M. Lee, Dept. of Materials Science and Engineering, Pohang Institute ofScience and Technology, Pohang 790-600, KOREA
646
J. Llorca, Dept. of Materials Science, Polytechnic University of Madrid28040 - Madrid, SPAIN