SEQ # 727-818 Tractors: Skid Steers Attachments T-631(5) State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) August, 2018 Pricing WorksitePro Price quote for: SKID/TRACK LOADERS & OEM ATTACHMENTS Vendor Name: John Deere Construction Retail Sales, a division of John Deere Shared Services, Inc. Contact Person: Richard Murga Street Address: 1515 5th Avenue P.O. Box: City, State, Zip Moline, IL 61265 Phone #: 309-765-0260 Toll Free #: 800-319-3757 ext 1 Fax #: N/A Email Address: [email protected]2010 .xlsx PERCENTAGE DISCOUNT PRICING 1.0 MANUFACTURER 2.0 DATE AND ID. OF PRICE LIST [10 Sep 18; WorksitePro Attachments] 3.0 PERCENTAGE DISCOUNT FROM PRICE LIST 4.0 PRICE FOR ADDITIONAL SERVICE MANUAL $45 4.1 PRICE FOR ADDITIONAL PARTS MANUAL $70 4.2 PRICE FOR ADDITIONAL OPERATIONS MANUAL $25 5.0 PERFORMANCE/ WARRANTY OPTIONS Use this section to offer performance/warranty options, number these items starting with 5.1, 5.2, etc. (Specify years, miles or hours extended term covers.) 5.1 N/A 5.2 N/A 6.0 NEW EQUIPMENT RENTAL PROGRAM If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. See Solicitation Special Terms & Conditions. Hourly Rental Rate: N/A Weekly Rental Rate: N/A Monthly Rental Rate: N/A Percent (%) of Rental Fee applied to purchase price: N/A 7.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price N/A 8.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES 20% (See Special Terms and Conditions) Applies to Field and Referral Items in Price Pages when sold w/Unit. 9.0 DELIVERY STARTING POINT - City, State, Zip Local Dealer (See Special Terms and Conditions - no flat rate allowed.) Price Per Loaded Mile: $5 with $50 Minimum 10.0 INSTALLATION - PER HOUR (Hourly Shop Rate): (Installation services may be requested on an "as needed" basis - see special terms and conditions.) $128.00 11.0 STANDARD WARRANTY: 12 mos full warranty Version of Excel used: John Deere See Note at Left 20%
170
Embed
State of Minnesota August, 2018 Tractors: Skid Steers ... · Tractors: Skid Steers Attachments T-631(5) State of Minnesota PRICING PAGE - METHOD # 2 (Typed Responses Required) August,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Vendor Name: John Deere Construction Retail Sales, a division of John Deere Shared Services, Inc.Contact Person: Richard MurgaStreet Address: 1515 5th AvenueP.O. Box:City, State, Zip Moline, IL 61265Phone #: 309-765-0260Toll Free #: 800-319-3757 ext 1Fax #: N/AEmail Address: [email protected]
2010 .xlsx
PERCENTAGE DISCOUNT PRICING
1.0 MANUFACTURER
2.0 DATE AND ID. OF PRICE LIST [10 Sep 18; WorksitePro Attachments]
3.0 PERCENTAGE DISCOUNT FROM PRICE LIST
4.0 PRICE FOR ADDITIONAL SERVICE MANUAL $45
4.1 PRICE FOR ADDITIONAL PARTS MANUAL $70
4.2 PRICE FOR ADDITIONAL OPERATIONS MANUAL $25
5.0 PERFORMANCE/ WARRANTY OPTIONSUse this section to offer performance/warranty options,number these items starting with 5.1, 5.2, etc.(Specify years, miles or hours extended term covers.)
5.1 N/A5.2 N/A
6.0 NEW EQUIPMENT RENTAL PROGRAMIf rental programs are available on the new equipmentoffered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent ofrental fee paid by the purchaser that will be applied tothe purchase price. See Solicitation Special Terms & Conditions.
Hourly Rental Rate: N/AWeekly Rental Rate: N/A
Monthly Rental Rate: N/APercent (%) of Rental Fee applied to purchase price: N/A
7.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAMSee Solicitation Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
8.0 DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES 20% (See Special Terms and Conditions) Applies to Field and Referral Items in Price Pages when sold w/Unit.
9.0 DELIVERY STARTING POINT - City, State, Zip Local Dealer(See Special Terms and Conditions - no flat rate allowed.) Price Per Loaded Mile: $5 with $50 Minimum
10.0 INSTALLATION - PER HOUR (Hourly Shop Rate):(Installation services may be requested on an "as needed" basis - see special terms and conditions.) $128.00
For use on the following models:312-318G SS313-320 SS318D-320D SS318E-320E SS317 CTLCT315 CTL
1,263.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
AF66 AG FORKSEquipment for Base Machine
10 September 2018US
No Base Equipment Description
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINE9330T AF72 AG FORKS
For use on the following models:317-328 SS318D-328D SS318E-328E SSCT315, CT322 CTLs317G CTL319D-323D CTLs319E-323E CTLs
1,400.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
AF72 AG FORKSEquipment for Base Machine
10 September 2018US
No Base Equipment Description
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINE9340T AF78 AG FORKS
For use on the following models:317-328 SS318D-328D SS318E-328E SSCT322 CTL317G CTL319D-323D CTLs319E-323E CTLs
1,550.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
AF78 AG FORKSEquipment for Base Machine
10 September 2018US
The Angle-Tatch attaches to theQuik-Tatch coupler and allowsattachments to tilt up to 14degrees to the left and right oflevel. The Angle-Tatch allowsbuckets, blades, and othernon-hydraulic attachments torotate for more precise gradingand leveling.Overall Width cm/(in) 118.87
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
AT14 Angle-TatchEquipment for Base Machine
10 September 2018US
Planetary Drive:Heavy Duty, All Gear DesignSealed Drive UnitReverse Rotation Feature
Auger Bits:Double-Wrap Flighting
Forged Alloy SteelHeat-Treated Bolt-On TeethReinforced Boring Head
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEFOB Dubuque,Ia.
03V1T PA15B PLANETARY DRIVE AUGERFor use on the following models:312G-314G SS17-27 CE
2,165.00
BACKHOE PLANETARY DRIVE AUGER QUICKCONNECTION
1006 PA15B PLANETARY AUGER FOR SKID STEERIncludes Skid Steer Mounting BracketBit is NOT included
405.00
1007 PA15B PLANETARY AUGER FOR COMPACT EXCAVATOR LESSMOUNTING BRACKETNOTE:* Requires Interface Adapter (9800, 9801)* Interface Adapter NOT included* For 17 and 27 CE* Bit is NOT included
No Added Cost
INTERFACE ADAPTERS9800 Interface Adapter for 17 ZTS and 17G 487.00
9801 Interface Adapter for 26G - 35G CE and 110 TLB 487.00
AUGER BITS9000 4 in. Heavy Duty Bit 245.00
9001 6 in. Heavy Duty Bit 269.00
9002 8 in. Heavy Duty Bit 376.00
9003 9 in. Heavy Duty Bit 414.00
9004 10 in. Heavy Duty Bit 435.00
9005 12 in. Heavy Duty Bit 446.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
PA15B PLANETARY DRIVE AUGEREquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
AUGER BITS Continued...9006 15 in. Heavy Duty Bit 582.00
9007 18 in. Heavy Duty Bit 728.00
9008 24 in. Heavy Duty Bit 880.00
9011 18 in. Tree and Shrub Bit 671.00
9012 24 in. Tree and Shrub Bit 690.00
9015 9 in. Rock Bit 1,334.00
9016 12 in. Rock Bit 1,562.00
9017 9 in. HD Difficult Ground Bit 549.00
9018 12 in. HD Difficult Ground Bit 635.00
9019 15 in. HD Difficult Ground Bit 789.00
9020 18 in. HD Difficult Ground Bit 935.00
9021 24 in. HD Difficult Ground Bit 1,343.00
DEALER-INSTALLED KITSAdapters & Mounting Frames
AT431624 PA15/PA30 Skid Steer Mounting Kit 563.00
Auger BitsKV15765 10 in. Heavy Duty Bit 435.00
AT379607 12 in. HD Difficult Ground Bit 635.00
KV15766 12 in. Heavy Duty Bit 446.00
KV15777 12 in. Rock Bit 1,562.00
AT379608 15 in. HD Difficult Ground Bit 789.00
KV15767 15 in. Heavy Duty Bit 582.00
AT379609 18 in. HD Difficult Ground Bit 935.00
KV15768 18 in. Heavy Duty Bit 728.00
KV15772 18 in. Tree and Shrub Bit 671.00
AT379610 24 in. HD Difficult Ground Bit 1,343.00
KV15769 24 in. Heavy Duty Bit 880.00
KV15773 24 in. Tree and Shrub Bit 690.00
KV15761 4 in. Heavy Duty Bit 245.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
PA15B PLANETARY DRIVE AUGERContinued
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...KV15762 6 in. Heavy Duty Bit 269.00
KV15763 8 in. Heavy Duty Bit 376.00
AT379606 9 in. HD Difficult Ground Bit 549.00
KV15764 9 in. Heavy Duty Bit 414.00
KV15776 9 in. Rock Bit 1,334.00
Extensions & AdaptersKV15779 12 in. Hex Drive Extension 180.00
KV15781 2 in. Hex to 2-9/16 in. Round Adaptor 235.00
KV15782 2-9/16 in. Round to 2 in. Hex 143.00
KV15780 24 in. Hex Drive Extension 201.00
Interface Adapters for Compact ExcavatorsAT306925 Interface Adapter for 17 ZTS 487.00
AT306924 Interface Adapter for 27-35 CE and 110 TLB 487.00
AT306926 Interface Adapter for 50-60 CE 579.00
Kits & AccessoriesAT357576 ISO Adapter to Quik Tatch Coupler 1,584.00
AT321209 Hydraulic HoseFor use on 35 and 50 CE Long Arm option.
See Parts
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
3
PA15B PLANETARY DRIVE AUGERContinued
10 September 2018US
Planetary Drive:Heavy Duty, All Gear DesignSealed Drive UnitReverse Rotation Feature
Auger Bits:Double-Wrap Flighting
Forged Alloy SteelHeat-Treated Bolt-On TeethReinforced Boring Head
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEFOB Dubuque,Ia.
03N1T PA30B PLANETARY DRIVE AUGERFor use on the following models:316G-332G SS318E-332E SS317G-333G CTL319E-333E CTLs204K,244J, 304K, 324J CWL110 TLB35-60 CE
* With the 244J, the Worksite Pro Skid Steer Style Coupler, AT357576, isrequired.
AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGHFLOW E series SSL and CTL machines to standard flow attachment couplers.
2,293.00
BACKHOE PLANETARY DRIVE AUGER QUICKCONNECTION
1008 PA30B PLANETARY AUGER FOR SKID STEERS, CTLs, AND CWLIncludes Skid Steer Mounting BracketBit is NOT included
405.00
1009 PA30B PLANETARY AUGER FOR COMPACT EXCAVATOR LESSMOUNTING BRACKETRequires Interface Adapter (9801, 9803)Interface Adapter NOT includedBit is NOT includedIf Compact Excavator is equipped with Long Arm (7120), also requires 2hydraulic hoses (AT321209) from Parts.
No Added Cost
INTERFACE ADAPTERS9801 Interface Adapter for 26G - 35G CE and 110 TLB 487.00
9803 Interface Adapter for 50G - 60G CE 579.00
AUGER BITS9000 4 in. Heavy Duty Bit 245.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
PA30B PLANETARY DRIVE AUGEREquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
AUGER BITS Continued...9001 6 in. Heavy Duty Bit 269.00
9002 8 in. Heavy Duty Bit 376.00
9003 9 in. Heavy Duty Bit 414.00
9004 10 in. Heavy Duty Bit 435.00
9005 12 in. Heavy Duty Bit 446.00
9006 15 in. Heavy Duty Bit 582.00
9007 18 in. Heavy Duty Bit 728.00
9008 24 in. Heavy Duty Bit 880.00
9009 30 in. Heavy Duty Bit 1,150.00
9010 36 in. Heavy Duty Bit 1,369.00
9011 18 in. Tree and Shrub Bit 671.00
9012 24 in. Tree and Shrub Bit 690.00
9013 30 in. Tree and Shrub Bit 975.00
9014 36 in. Tree and Shrub Bit 1,167.00
9015 9 in. Rock Bit 1,334.00
9016 12 in. Rock Bit 1,562.00
9017 9 in. HD Difficult Ground Bit 549.00
9018 12 in. HD Difficult Ground Bit 635.00
9019 15 in. HD Difficult Ground Bit 789.00
9020 18 in. HD Difficult Ground Bit 935.00
9021 24 in. HD Difficult Ground Bit 1,343.00
DEALER-INSTALLED KITSAdapters & Mounting Frames
AT431624 PA15/PA30 Skid Steer Mounting Kit 563.00
Auger BitsKV15765 10 in. Heavy Duty Bit 435.00
AT379607 12 in. HD Difficult Ground Bit 635.00
KV15766 12 in. Heavy Duty Bit 446.00
KV15777 12 in. Rock Bit 1,562.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
PA30B PLANETARY DRIVE AUGERContinued
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT379608 15 in. HD Difficult Ground Bit 789.00
KV15767 15 in. Heavy Duty Bit 582.00
AT379609 18 in. HD Difficult Ground Bit 935.00
KV15768 18 in. Heavy Duty Bit 728.00
KV15772 18 in. Tree and Shrub Bit 671.00
AT379610 24 in. HD Difficult Ground Bit 1,343.00
KV15769 24 in. Heavy Duty Bit 880.00
KV15773 24 in. Tree and Shrub Bit 690.00
KV15770 30 in. Heavy Duty Bit 1,150.00
KV15774 30 in. Tree and Shrub Bit 975.00
KV15771 36 in. Heavy Duty Bit 1,369.00
KV15775 36 in. Tree and Shrub Bit 1,167.00
KV15761 4 in. Heavy Duty Bit 245.00
KV15762 6 in. Heavy Duty Bit 269.00
KV15763 8 in. Heavy Duty Bit 376.00
AT379606 9 in. HD Difficult Ground Bit 549.00
KV15764 9 in. Heavy Duty Bit 414.00
KV15776 9 in. Rock Bit 1,334.00
Extensions & AdaptersKV15779 12 in. Hex Drive Extension 180.00
KV15781 2 in. Hex to 2-9/16 in. Round Adaptor 235.00
KV15782 2-9/16 in. Round to 2 in. Hex 143.00
KV15780 24 in. Hex Drive Extension 201.00
Interface Adapters for Compact ExcavatorsAT306925 Interface Adapter for 17 ZTS 487.00
AT306924 Interface Adapter for 27-35 CE and 110 TLB 487.00
AT306926 Interface Adapter for 50-60 CE 579.00
Kits & AccessoriesAT357576 ISO Adapter to Quik Tatch Coupler 1,584.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
MiscellaneousBM19556 Rubber Street Pad Kit See Parts
Tie Down Yokes & Mounting KitsKV24551 Mounting Kit for 317-320, CT322 460.00
KV22699 Mounting Kit for 325-332, CT332 460.00
KV16198 Tie Down Yoke for 317-320, CT322 358.00
KV16199 Tie Down Yoke for 325-332, CT332 358.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
BH11 BACKHOEContinued
10 September 2018US
Bale Hugger is designed for verylarge bales. It has a maximumopening of 110 inches and willsqueeze the bales together totransport, stack or load bales.-Designed with round tubing toprovide maximum durability whilepreventing damage to wrappedbale coverings-Provides constant pressure thateliminates the risk of droppingbales-Right-hand and left-hand sides
open and close simultaneously-Can lift, move, and stack roundor rectangular bales-Ideal for 1,000 lb. silage bagswith a maximum load of 2,400lbs.Overall Width cm/(in) 120.65(47.5)Overall Height cm/(in) 95.25(37.5)Overall Depth cm/(in) 137.16(54)Max. Opening cm/(in) 279.40
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
BALE SPEAR, SQUAREEquipment for Base Machine
10 September 2018US
Specifications:10-28 gpm Hydraulic Flow50/50 Poly Wire Brush32 in. Diameter Brush
Angle Control:Hydraulic AnglingElectronically Activated30 Degrees EitherDirection From Center
Standard Equipment:
JackstandsRubber Dirt Deflector
72 in. Straight SweepingWidth
62.5 in. Angled SweepingWidth
87 in. Overall StraightWidth
83 in. Overall Angled Width
NOTE: Applicable Attachment
Control Kit is Required
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEFOB Dubuque,Iowa.
0300KV BA72 ANGLE BROOMFor use on the following models:312-318G SS313-332 SS318D-332D SS318E-332E SSCT315-CT332 CTLs317G CTL319D-333D CTLs319E-333E CTLs
AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGHFLOW E series SSL and CTL machines to standard flow attachment couplers.
6,209.00
DEALER-INSTALLED KITSKits & Accessories
KV21995 12 Volt Demonstration Kit3-pin connector
314.00
KV25224 12 Volt Receptacle Kit (with Traditional Controls) (300 Series)3-pin connector
177.00
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
BA72 ANGLE BROOMEquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT348477 Attachment Control (with E-H Joystick Controls)
D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
AT348475 Attachment Control (with Foot, Hand Controls)* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
AT339786 Attachment Control (with Joystick Controls) (300 Series)14-pin connector and 3-pin connector included
245.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
AT435129 Water Tank KitSSL:318D-332D318E-332E330G-332GCTL:319D-333D319E-333E331G-333GFor use with spray bar. 30 gallon capacity.
1,829.00
AT345212 Water Tank Kit (317-332, CT322-CT332)For use with spray bar. 30 gallon capacity.
1,328.00
Kits and AccessoriesAT332454 12 Volt Receptacle Kit 204.00
AT349599 Broom Spray Bar, 72 in. 661.00
AT323246 Dual Motor KitFor serial #s T0BA72X700101 through 1T0BA72XAB0000143 andT0BA84X700101 through 1T0BA84XCB0000157.
For below serial #s T0BA72X700101 and T0BA84X700101, order Dual MotorKit components from Parts.Installation instructions T216317.
1,087.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
BA72 ANGLE BROOMContinued
10 September 2018US
Specifications:10-28 gpm Hydraulic Flow50/50 Poly Wire Brush32 in. Diameter Brush
Angle Control:Hydraulic AnglingElectronically Activated30 Degrees EitherDirection From Center
Standard Equipment:
JackstandsRubber Dirt Deflector
84 in. Straight SweepingWidth
73 in. Angled Sweeping Width99 in. Overall StraightWidth
93.5 in. Overall AngledWidth
NOTE: Applicable Attachment
Control Kit Required
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEFOB Dubuque,Iowa.
0301KV BA84 ANGLE BROOMFor use on the following models:317-332 SS318D-332D SS318E-332E SSCT322, CT332 CTLs317G CTL319D-333D CTLs319E-333E CTLs
AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGHFLOW E series SSL and CTL machines to standard flow attachment couplers.
6,400.00
DEALER-INSTALLED KITSKits & Accessories
KV21995 12 Volt Demonstration Kit3-pin connector
314.00
KV25224 12 Volt Receptacle Kit (with Traditional Controls) (300 Series)3-pin connector
177.00
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
BA84 ANGLE BROOMEquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT348477 Attachment Control (with E-H Joystick Controls)
D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
AT348475 Attachment Control (with Foot, Hand Controls)* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
AT339786 Attachment Control (with Joystick Controls) (300 Series)14-pin connector and 3-pin connector included
245.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
AT435129 Water Tank KitSSL:318D-332D318E-332E330G-332GCTL:319D-333D319E-333E331G-333GFor use with spray bar. 30 gallon capacity.
1,829.00
AT345212 Water Tank Kit (317-332, CT322-CT332)For use with spray bar. 30 gallon capacity.
1,328.00
Kits and AccessoriesAT349600 Broom Spray Bar, 84 in. 708.00
AT323246 Dual Motor KitFor serial #s T0BA72X700101 through 1T0BA72XAB0000143 andT0BA84X700101 through 1T0BA84XCB0000157.
For below serial #s T0BA72X700101 and T0BA84X700101, order Dual MotorKit components from Parts.Installation instructions T216317.
1,087.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
BA96C 96" Angle BroomEquipment for Base Machine
10 September 2018US
Specifications:10-28 gpm Hydraulic Flow50/50 Poly Wire Brush25 in. Diameter Brush
Standard Equipment:2 Caster Wheels forBetter StabilityBaffle to Material in
BucketInfinite Brush Height
Specifications:72 in. Sweeping Width86 in. Overall Width88 in. Sweeping Width withGutter Brush
14.3 Cubic Feet HopperCapacity
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEFOB Dubuque,Iowa.
0310KV BP72 PICK-UP BROOMFor use on the following models:314-318G SS313-332 SS318D-332D SS318E-332E SSCT315-CT332 CTLs317G CTL319D-333D CTLs319E-333E CTLs
AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGHFLOW E series SSL and CTL machines to standard flow attachment couplers.
5,923.00
DEALER-INSTALLED KITSKits & Accessories
AT435129 Water Tank KitSSL:318D-332D318E-332E330G-332GCTL:319D-333D319E-333E331G-333GFor use with spray bar. 30 gallon capacity.
1,829.00
AT345212 Water Tank Kit (317-332, CT322-CT332)For use with spray bar. 30 gallon capacity.
1,328.00
Kits and AccessoriesAT349599 Broom Spray Bar, 72 in. 661.00
KV23661 Second Gutter Brush* Must also order Single Gutter Brush to complete
1,818.00
KV23660 Single Gutter Brush 1,853.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
BP72 PICK-UP BROOMEquipment for Base Machine
10 September 2018US
Specifications:10-28 gpm Hydraulic Flow50/50 Poly Wire Brush25 in. Diameter Brush
Standard Equipment:2 Caster Wheels forBetter StabilityBaffle to Material in
BucketInfinite Brush Height
Specifications:84 in. Sweeping Width98 in. Overall Width100 in. Sweeping Width withGutter Brush
16.7 Cubic Feet HopperCapacity
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEFOB Dubuque,Iowa.
0311KV BP84 PICK-UP BROOMFor use on the following models:317-332 SS318D-332D SS318E-332E SSCT322, CT332 CTLs317G CTL319D-333D CTLs319E-333E CTLs
AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGHFLOW E series SSL and CTL machines to standard flow attachment couplers.
7,106.00
DEALER-INSTALLED KITSKits & Accessories
AT435129 Water Tank KitSSL:318D-332D318E-332E330G-332GCTL:319D-333D319E-333E331G-333GFor use with spray bar. 30 gallon capacity.
1,829.00
AT345212 Water Tank Kit (317-332, CT322-CT332)For use with spray bar. 30 gallon capacity.
1,328.00
Kits and AccessoriesAT349600 Broom Spray Bar, 84 in. 708.00
KV23661 Second Gutter Brush* Must also order Single Gutter Brush to complete
1,818.00
KV23660 Single Gutter Brush 1,853.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
BP84 PICK-UP BROOMEquipment for Base Machine
10 September 2018US
TO BE DELIVERED.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEFOB Dubuque,Iowa.
7820T BR60 RIGID PICK-UP BROOMFor use on the following models:312-318G SS313-315 SSCT315 CTL317G CTL
4,116.00
DEALER-INSTALLED KITSKits & Accessories
AT435129 Water Tank KitSSL:318D-332D318E-332E330G-332GCTL:319D-333D319E-333E331G-333GFor use with spray bar. 30 gallon capacity.
1,829.00
Kits and AccessoriesAT349598 Broom Spray Bar, 60 in. 640.00
KV23661 Second Gutter Brush 1,818.00
KV23660 Single Gutter Brush 1,853.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
BR60 RIGID PICK-UP BROOMEquipment for Base Machine
10 September 2018US
Specifications:10-30 gpm (37.8-113.5 lpm)Hydraulic Flow50/50 Poly Wire Brush25 in. (635 mm) DiameterBrush6.38 in. (162 mm) CoreDiameterForward & Backward Operation72 in. (1828 mm) SweepingWidth
86.1 in. (2187 mm) WorkingWidth88 in. (2184 mm)SweepingWidth with Gutter Brush15.75 cu. ft. (0.45 cu m)Hopper Capacity
Dimensions:29 in. (736 mm) Height53.3 in. (1354 mm) Length
AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGHFLOW E series SSL and CTL machines to standard flow attachment couplers.
4,533.00
DEALER-INSTALLED KITSKits & Accessories
AT435129 Water Tank KitSSL:318D-332D318E-332E330G-332GCTL:319D-333D319E-333E331G-333GFor use with spray bar. 30 gallon capacity.
1,829.00
AT345212 Water Tank Kit (317-332, CT322-CT332)For use with spray bar. 30 gallon capacity.
1,328.00
Kits and AccessoriesAT349599 Broom Spray Bar, 72 in. 661.00
KV23661 Second Gutter Brush* Must also order Single Gutter Brush to complete
1,818.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
BR72 RIGID PICK-UP BROOMEquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...KV23660 Single Gutter Brush 1,853.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
BR72 RIGID PICK-UP BROOMContinued
10 September 2018US
Specifications:10-30 gpm (37.8-113.5 lpm)Hydraulic Flow50/50 Poly Wire Brush25 in. (635 mm) DiameterBrush6.38 in. (162 mm) CoreDiameterForward & Backward Operation84 in. (2133 mm) SweepingWidth
98.1 in. (2492 mm) WorkingWidth100 in. (2540 mm) SweepingWidth with Gutter Brush18.21 cu. ft. (0.52 cu m)Hopper Capacity
Dimensions:29 in. (736 mm) Height53.3 in. (1354 mm) Length
Operating Width: 1050 lbs.(476 kg)
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEFOB Dubuque,Iowa.
1530T BR84 RIGID PICK-UP BROOMFor use on the following models:317-332 SS318D-332D318E-332ECT322, CT332 CTLs317G CTL319D-333D CTLs319E-333E CTLs204K, 244J, 304K, 324J CWL
* With the 244J, the Worksite Pro Skid Steer Style Coupler, AT357576, isrequired.
AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGHFLOW E series SSL and CTL machines to standard flow attachment couplers.
4,952.00
DEALER-INSTALLED KITSKits & Accessories
AT357576 ISO Adapter to Quik Tatch Coupler 1,584.00
AT435129 Water Tank KitSSL:318D-332D318E-332E330G-332GCTL:319D-333D319E-333E331G-333GFor use with spray bar. 30 gallon capacity.
1,829.00
AT345212 Water Tank Kit (317-332, CT322-CT332)For use with spray bar. 30 gallon capacity.
1,328.00
Kits and AccessoriesAT349600 Broom Spray Bar, 84 in. 708.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
BR84 RIGID PICK-UP BROOMEquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...KV23661 Second Gutter Brush
* Must also order Single Gutter Brush to complete1,818.00
KV23660 Single Gutter Brush 1,853.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGHFLOW E series SSL and CTL machines to standard flow attachment couplers.
10,211.00
PICK KIT1001 General Purpose
Will do both concrete and asphalt, but will wear out in concrete.No Added Cost
1002 RP18Asphalt only.
No Added Cost
DEALER-INSTALLED KITSKits & Accessories
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
CP12D COLD PLANEREquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT427985 Attachment Control Kit
For E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
AT462795 Carbide Cutting Tools, General PurposeWill do both concrete and asphalt, but will wear out in concrete.
443.00
AT462796 Carbide Cutting Tools, RP18Asphalt only.
378.00
AT435129 Water Tank KitFor use with spray bar. 30 gallon capacity.Use for D-Series, E-Series and G-Series.
1,829.00
AT345212 Water Tank Kit (317-332, CT322-CT332)For use with spray bar. 30 gallon capacity.Use for 300 Series.
1,328.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
CP12D COLD PLANERContinued
10 September 2018US
Drum Size:18 in. (457 mm) CuttingWidthDesign Features:High Flow Hydraulics29-41 gpm (110-155 lpm)Planetary DriveTilt of +/- 8 DegreesDepth Control 0-5 in.(0-127 mm)
Hydraulic Side Shift-3 - 22 in.(-76 - 559 mm)Quantity of pics 45Spray Bar with nozzles, less
water tank
NOTE: Hi-Flow Hyrdraulicsand Applicable AttachmentControl Kit are Required.
Will do both concrete and asphalt, but will wear out in concrete.No Added Cost
1006 RP18Asphalt only.
No Added Cost
DEALER-INSTALLED KITSKits & Accessories
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
AT348477 Attachment Control (with E-H Joystick Controls)D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
CP18D COLD PLANEREquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT348475 Attachment Control (with Foot, Hand Controls)
* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
AT320590 Attachment Control (with Foot, Hand Controls) (317-332, CT322-CT332)* 14-pin connector* Includes 8-Button Control Handle
808.00
AT339786 Attachment Control (with Joystick Controls) (300 Series)14-pin connector and 3-pin connector included
245.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
AT462797 Carbide Cutting Tools, General PurposeWill do both concrete and asphalt, but will wear out in concrete.
531.00
AT462798 Carbide Cutting Tools, RP18Asphalt only.
452.00
AT435129 Water Tank KitFor use with spray bar. 30 gallon capacity.Use for D-Series, E-Series and G-Series.
1,829.00
AT345212 Water Tank Kit (317-332, CT322-CT332)For use with spray bar. 30 gallon capacity.Use for 300 Series.
1,328.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
CP18D COLD PLANERContinued
10 September 2018US
Drum Size:24 in. (610 mm) CuttingWidth
Design Features:High Flow Hydraulics29-41 gpm (110-155 lpm)Planetary DriveTilt of +/- 8 DegreesDepth Control 0-5 in.
(0-127 mm)Hydraulic Side Shift-3 - 22 in.(-76 - 559 mm)Quantity of pics 57Spray Bar with nozzles, less
water tankNOTE: Hi-Flow Hyrdraulicsand Applicable AttachmentControl Kit are Required.
Will do both concrete and asphalt, but will wear out in concrete.No Added Cost
1010 RP18Asphalt only.
No Added Cost
DEALER-INSTALLED KITSKits & Accessories
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
AT348477 Attachment Control (with E-H Joystick Controls)D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
CP24D COLD PLANEREquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT348475 Attachment Control (with Foot, Hand Controls)
* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
AT320590 Attachment Control (with Foot, Hand Controls) (317-332, CT322-CT332)* 14-pin connector* Includes 8-Button Control Handle
808.00
AT339786 Attachment Control (with Joystick Controls) (300 Series)14-pin connector and 3-pin connector included
245.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
AT462799 Carbide Cutting Tools, General PurposeWill do both concrete and asphalt, but will wear out in concrete.
672.00
AT462800 Carbide Cutting Tools, RP18Asphalt only.
570.00
AT435129 Water Tank KitFor use with spray bar. 30 gallon capacity.Use for D-Series, E-Series and G-Series.
1,829.00
AT345212 Water Tank Kit (317-332, CT322-CT332)For use with spray bar. 30 gallon capacity.Use for 300 Series.
1,328.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
CP24D COLD PLANERContinued
10 September 2018US
Drum Size:30 in. (762 mm) CuttingWidthDesign Features:High Flow Hydraulics29-41 gpm (110-155 lpm)Planetary DriveTilt of +/- 8 DegreesDepth Control 0-5 in.(0-127 mm)
Hydraulic Side Shift-3 - 22 in.(-76 - 559 mm)Quantity of pics 69Spray Bar with nozzles, less
water tank
NOTE: Hi-Flow Hyrdraulicsand Applicable AttachmentControl Kit are Required.
Will do both concrete and asphalt, but will wear out in concrete.No Added Cost
1014 RP18Asphalt only.
No Added Cost
DEALER-INSTALLED KITSKits & Accessories
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
AT348477 Attachment Control (with E-H Joystick Controls)D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
CP30D COLD PLANEREquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT348475 Attachment Control (with Foot, Hand Controls)
* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
AT320590 Attachment Control (with Foot, Hand Controls) (317-332, CT322-CT332)* 14-pin connector* Includes 8-Button Control Handle
808.00
AT339786 Attachment Control (with Joystick Controls) (300 Series)14-pin connector and 3-pin connector included
245.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
AT462801 Carbide Cutting Tools, General PurposeWill do both concrete and asphalt, but will wear out in concrete.
806.00
AT462802 Carbide Cutting Tools, RP18Asphalt only.
712.00
AT435129 Water Tank KitFor use with spray bar. 30 gallon capacity.Use for D-Series, E-Series and G-Series.
1,829.00
AT345212 Water Tank Kit (317-332, CT322-CT332)For use with spray bar. 30 gallon capacity.Use for 300 Series.
1,328.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
CP30D COLD PLANERContinued
10 September 2018US
Overall width: 84.0 in. (2133mm)Length: 31.5 in. (800 mm)Blade height: 24.0 in. (610 mm)Blade width (full angle): 74.1in. (1882 mm)Cutting edge (reversible): 0.625x 6 in. (16 x 153 mm)
Degrees of angle: 30, right orleftDegrees of tilt: 10, up or downAdjustable skid shoe: StandardComes Standard with 3 Pin WireHarness
AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGHFLOW E series SSL and CTL machines to standard flow attachment couplers.
6,130.00
DEALER-INSTALLED KITSKits & Accessories
KV21995 12 Volt Demonstration Kit3-pin connector
314.00
KV25224 12 Volt Receptacle Kit (with Traditional Controls) (300 Series)3-pin connector
177.00
AT336190 14 Pin Wire Harness Adapter (300 Series)For use when equipped with an Attachment Control (with Traditional Controls),AT320590For use when equipped with an Eight Button Control Handle, AT320590
See Parts
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
AT348477 Attachment Control (with E-H Joystick Controls)D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
DB84 DOZER BLADEEquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT348475 Attachment Control (with Foot, Hand Controls)
* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
AT339786 Attachment Control (with Joystick Controls) (300 Series)14-pin connector and 3-pin connector included
245.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
AT428072 hydraulic quick coupler adapter kit is available to adapt all HIGHFLOW E series SSL and CTL machines to standard flow attachment couplers.
6,629.00
DEALER-INSTALLED KITSKits & Accessories
KV21995 12 Volt Demonstration Kit3-pin connector
314.00
KV25224 12 Volt Receptacle Kit (with Traditional Controls) (300 Series)3-pin connector
177.00
AT336190 14 Pin Wire Harness Adapter (300 Series)For use when equipped with an Attachment Control (with Traditional Controls),AT320590For use when equipped with an Eight Button Control Handle, AT320590
See Parts
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
AT348477 Attachment Control (with E-H Joystick Controls)D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
DB96 DOZER BLADEEquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT348475 Attachment Control (with Foot, Hand Controls)
* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
AT339786 Attachment Control (with Joystick Controls) (300 Series)14-pin connector and 3-pin connector included
245.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
DB96 DOZER BLADEContinued
10 September 2018US
TO BE DELIVERED.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
7860T GU60 UTILITY AG GRAPPLEFor:312G-318G SS
Includes cylinder stop kit required for compatibility with large frame G-Series(330G, 331G, 332G, 333G) and some competitive brands.
2,531.00
DEALER-INSTALLED KITSKits & Accessories
AT475186 Cylinder Stop Kit 30.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
GU60 UTILITY AG GRAPPLEEquipment for Base Machine
10 September 2018US
Features:Single Grapple for BetterHandling of Hay, Silage,and ManurePivot Points are 1 in.HardenedPins Able to Accept GreaseHardened 1 in. CylinderRods
Dimensions:Width 66 in.Height Grapple Closed
27.6 in.Height Grapple Opened45.7 in.Grapple Opening 36 in.Opening Between Tines4.5 in.
Hydraulic Cylinders:2 in. Bore8.1 in. Stroke1 in. Hardened Rod
NOTE: Rear Ballast is Not
Required. However,Depending on MaterialDensity Being Handled,Rear Ballast May EnhanceMachine's Stability.
AT379709 Hose Guide KitRequired when using GU66-GU78 Utility Grapples, HH15-HH75 HydraulicHammers, or HB60 Hydraulic Breaker on 318D-320D SS or 319D-323D CTLswith Power Quik-Tatch (5001)
392.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
GU66 UTILITY AG GRAPPLEEquipment for Base Machine
10 September 2018US
Features:Single Grapple for BetterHandling of Hay, Silage,and ManurePivot Points are 1 in.HardenedPins Able to Accept GreaseHardened 1 in. CylinderRods
Dimensions:Width 72 in.Height Grapple Closed
27.6 in.Height Grapple Opened45.7 in.Grapple Opening 36 in.Opening Between Tines4.5 in.
Hydraulic Cylinders:2 in. Bore8.1 in. Stroke1 in. Hardened Rod
NOTE: Rear Ballast is NotRequired. However,
Depending on MaterialDensity Being Handled,Rear Ballast May EnhanceMachine's Stability.
AT379709 Hose Guide KitRequired when using GU66-GU78 Utility Grapples, HH15-HH75 HydraulicHammers, or HB60 Hydraulic Breaker on 318D-320D SS or 319D-323D CTLswith Power Quik-Tatch (5001)
392.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
GU72 UTILITY AG GRAPPLEEquipment for Base Machine
10 September 2018US
Features:Single Grapple for BetterHandling of Hay, Silage,and ManurePivot Points are 1 in.HardenedPins Able to Accept GreaseHardened 1 in. CylinderRods
Dimensions:Width 78 in.Height Grapple Closed
27.6 in.Height Grapple Opened45.7 in.Grapple Opening 36 in.Opening Between Tines4.5 in.
Hydraulic Cylinders:2 in. Bore8.1 in. Stroke1 in. Hardened Rod
NOTE: Rear Ballast is NotRequired. However,
Depending on MaterialDensity Being Handled,Rear Ballast May EnhanceMachine's Stability.
AT379709 Hose Guide KitRequired when using GU66-GU78 Utility Grapples, HH15-HH75 HydraulicHammers, or HB60 Hydraulic Breaker on 318D-320D SS or 319D-323D CTLswith Power Quik-Tatch (5001)
392.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
GU78 UTILITY AG GRAPPLEEquipment for Base Machine
10 September 2018US
Features:2 Independent-ActionGrapples With RoundProfile to Pull MaterialInto BucketPivot Points are 1 in.HardenedPins Able to Accept GreaseHardened 1 in. CylinderRods
Dimensions:Width 72 in.Height Grapple Closed28.5 in.
Height Grapple Opened45.9 in.Grapple Opening 38.2 in.Opening Between Tines 4 in.
Hydraulic Cylinders:2 in. Bore8.1 in. Stroke1 in. Hardened Rod
NOTE: Rear Ballast is NotRequired. However, Dependingon Material Density BeingHandled, Rear Ballast May
Enhance Machine's Stability.Demolition Door and Non-Pneumatic Tires may Also BeNeeded Pending Application.
Required when using GU66-GU78 Utility Grapples, HH15-HH75 HydraulicHammers, or HB60 Hydraulic Breaker on 318D-320D SS or 319D-323D CTLswith Power Quik-Tatch (5001)
392.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
GT72 BRUSH TINED GRAPPLEContinued
10 September 2018US
Features:2 Independent-ActionGrapples With RoundProfile to Pull MaterialInto BucketPivot Points are 1 in.HardenedPins Able to Accept GreaseHardened 1 in. CylinderRods
Dimensions:Width 80 in.Height Grapple Closed28.5 in.
Height Grapple Opened45.9 in.Grapple Opening 38.2 in.Opening Between Tines 4 in.
Hydraulic Cylinders:2 in. Bore8.1 in. Stroke1 in. Hardened Rod
NOTE: Rear Ballast is NotRequired. However, Dependingon Material Density BeingHandled, Rear Ballast May
Enhance Machine's Stability.Demolition Door and Non-Pneumatic Tires may Also BeNeeded Pending Application.
Required when using GU66-GU78 Utility Grapples, HH15-HH75 HydraulicHammers, or HB60 Hydraulic Breaker on 318D-320D SS or 319D-323D CTLswith Power Quik-Tatch (5001)
392.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
Includes cylinder stop kit required for compatibility with large frame G-Series(330G, 331G, 332G, 333G) and some competitive brands.
3,976.00
DEALER-INSTALLED KITSCutting Edges
KV17819 60 in. Bolt-On Cutting EdgeRequires additional hardware; see Parts.Requires Six Grade 8 Plow Bolts and Nuts (PB625225)
See Parts
Kits & AccessoriesAT312692 2-inch Seat Belt with Shoulder Harness for Suspension Seat 311.00
KV23054 Bolt on Side Plates for Scrap Grapple 166.00
AT475186 Cylinder Stop Kit 30.00
AT425249 Demolition Door Kit2- or 3-inch Seat Belt with Shoulder Harness required.
918.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
GS60 SCRAP GRAPPLE BUCKETEquipment for Base Machine
10 September 2018US
Features:2 Independent-ActionGrapples with RoundProfile to Pull Materialinto BucketPivot Points are 1 in.HardenedPins Able to AcceptGreaseHardened 1 in. CylinderRods
Dimensions:Width 66 in.Height Grapple Closed28.5 in.Height Grapple Opened
45.9 in.Grapple Opening 39.3 in.
Cutting Edge:Predrilled for OptionalBolt-On
Hydraulic Cylinders:2 in. Bore8.1 in. Stroke1 in. Hardened Rod
Options:End Plates
NOTE: Rear Ballast is NotRequired. However, Depending
on Material Density BeingHandled, Rear BallastMayEnhance Machine's Stability.Demolition Door and Non-Pneumatic Tires May Also beNeeded Pending Application.
Kits & AccessoriesAT312692 2-inch Seat Belt with Shoulder Harness for Suspension Seat 311.00
KV23054 Bolt on Side Plates for Scrap Grapple 166.00
AT475186 Cylinder Stop Kit 30.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
GS66 SCRAP GRAPPLE BUCKETEquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT425249 Demolition Door Kit
2- or 3-inch Seat Belt with Shoulder Harness required.918.00
AT379709 Hose Guide KitRequired when using GU66-GU78 Utility Grapples, HH15-HH75 HydraulicHammers, or HB60 Hydraulic Breaker on 318D-320D SS or 319D-323D CTLswith Power Quik-Tatch (5001)
392.00
MiscellaneousU16748 66 in. Bolt-On Cutting Edge
Requires Seven Grade 8 Plow Bolts and Nuts (PB750225)See Parts
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
GS66 SCRAP GRAPPLE BUCKETContinued
10 September 2018US
Features:2 Independent-ActionGrapples with RoundProfile to Pull Materialinto BucketPivot Points are 1 in.HardenedPins Able to AcceptGreaseHardened 1 in. CylinderRods
Dimensions:Width 84 in.Height Grapple Closed28.5 in.Height Grapple Opened
45.9 in.Grapple Opening 39.3 in.
Cutting Edge:Predrilled for OptionalBolt-On
Hydraulic Cylinders:2 in. Bore8.1 in. Stroke1 in. Hardened Rod
Options:End Plates
NOTE: Rear Ballast is NotRequired. However, Depending
on Material Density BeingHandled, Rear BallastMayEnhance Machine's Stability.Demolition Door and Non-Pneumatic Tires May Also beNeeded Pending Application.
Kits & AccessoriesAT312692 2-inch Seat Belt with Shoulder Harness for Suspension Seat 311.00
KV23054 Bolt on Side Plates for Scrap Grapple 166.00
AT475186 Cylinder Stop Kit 30.00
AT379709 Hose Guide KitRequired when using GU66-GU78 Utility Grapples, HH15-HH75 HydraulicHammers, or HB60 Hydraulic Breaker on 318D-320D SS or 319D-323D CTLswith Power Quik-Tatch (5001)
392.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
Kits & AccessoriesAT312692 2-inch Seat Belt with Shoulder Harness for Suspension Seat 311.00
AT425249 Demolition Door Kit(313, 315, CT315)2- or 3-inch Seat Belt with Shoulder Harness required.This is a roll up door.
918.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
HH20C HYDRAULIC HAMMEREquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...Kits and Accessories
T370209 Chisel See Parts
T370214 Compacting Plate See Parts
T370210 Moil Point See Parts
T370211 Pyramid See Parts
AT417602 Severe Duty DoorIncludes windshield wiper.For ROPS Canopy units also order AT387526.Required to meet ISO 8084 Forestry Applications.Use for D and E Series Models.S/N 269401 and below.
3,107.00
T370212 Spade, Parallel to Boom See Parts
T370213 Spade, Transverse to Boom See Parts
REFERRAL ATTACHMENTSG.R.Mfg.G.R. Manufacturing, Inc.* Kits listed below must be ordered through John Deere.* F.O.B. Trussville, Alabama* All kits include installation instructions* All warranty, repair parts, technical support and assistance, and sales supportand assistance will be the responsibility of G.R. Manufacturing, Inc., and will behandled directly between the Dealer and G.R. Manufacturing, Inc.
AT318959 Front Protection Screen for Cab (GR#704995) (26-60 CE)*Required when a Hydraulic Breaker is equipped on a Deere D-Series or Hitachi-3 Compact Excavator with a Cab.
768.00
AT318960 Front Protection Screen for Canopy (GR#704996) (26-50 CE)*Required when a Hydraulic Breaker is equipped on a Deere D-Series or Hitachi-3 Compact Excavator with a Canopy.
620.00
AT337084 Front Protection Screen for Canopy (GR#705155) (17 CE)*Required when a Hydraulic Breaker is equipped on a Deere D-Series or Hitachi-2 Compact Excavator with a Canopy.
670.00
BYT10076 Front Screen, Cab (GR#705923) (17 CE)*Required when a Hydraulic Breaker is equipped on a Deere G-Series or Hitachi-5 Compact Excavator with a Canopy.
1,006.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
Quik-Tatch Mounting with1/2 in. Couplers and Hoses
Note: Units Must beEquipped with Demolition orSevere Duty Door andShoulder Belt Kitsor Protection Screens.
Includes Moil Point.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
0C90T HH40C HYDRAULIC HAMMERFor use on the following models:Skid Steer Loaders: 316G-324G, 318E, 320E and 324ECompact Track Loaders: 317G, 325G, 319E, 323E, and 329ECompact Excavators: 26G and 35GBackhoe Loader: 110 TLB
8,082.00
MOUNTING BRACKETS1000 Less Mounting Bracket No Added Cost
Kits & AccessoriesAT312692 2-inch Seat Belt with Shoulder Harness for Suspension Seat 311.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
HH40C HYDRAULIC HAMMEREquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT425249 Demolition Door Kit
(313, 315, CT315)2- or 3-inch Seat Belt with Shoulder Harness required.This is a roll up door.
918.00
Kits and AccessoriesT370215 Chisel See Parts
T370220 Compacting Plate See Parts
T370216 Moil Point See Parts
T370217 Pyramid See Parts
AT417602 Severe Duty DoorIncludes windshield wiper.For ROPS Canopy units also order AT387526.Required to meet ISO 8084 Forestry Applications.Use for D and E Series Models.S/N 269401 and below.
3,107.00
T370218 Spade, Parallel to Boom See Parts
T370219 Spade, Transverse to Boom See Parts
REFERRAL ATTACHMENTSG.R.Mfg.G.R. Manufacturing, Inc.* Kits listed below must be ordered through John Deere.* F.O.B. Trussville, Alabama* All kits include installation instructions* All warranty, repair parts, technical support and assistance, and sales supportand assistance will be the responsibility of G.R. Manufacturing, Inc., and will behandled directly between the Dealer and G.R. Manufacturing, Inc.
AT318959 Front Protection Screen for Cab (GR#704995) (26-60 CE)*Required when a Hydraulic Breaker is equipped on a Deere D-Series or Hitachi-3 Compact Excavator with a Cab.
768.00
AT318960 Front Protection Screen for Canopy (GR#704996) (26-50 CE)*Required when a Hydraulic Breaker is equipped on a Deere D-Series or Hitachi-3 Compact Excavator with a Canopy.
620.00
AT451135 Front Screen, Cab (GR#705753) (26-50 CE)*Required when a Hydraulic Breaker is equipped on a Deere G-Series or Hitachi-5 Compact Excavator with a Cab.
582.00
AT435404 Front Screen, Canopy (GR#705578) (35-50 CE)*Required when a Hydraulic Breaker is equipped on a Deere G-Series or Hitachi-5 Compact Excavator with a Canopy.
480.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
Kits & AccessoriesAT312692 2-inch Seat Belt with Shoulder Harness for Suspension Seat 311.00
AT425249 Demolition Door Kit(313, 315, CT315)2- or 3-inch Seat Belt with Shoulder Harness required.This is a roll up door.
918.00
Kits and AccessoriesT370221 Chisel See Parts
T370225 Compacting Plate See Parts
T370222 Moil Point See Parts
AT417602 Severe Duty DoorIncludes windshield wiper.For ROPS Canopy units also order AT387526.Required to meet ISO 8084 Forestry Applications.Use for D and E Series Models.S/N 269401 and below.
3,107.00
T370223 Spade, Parallel to Boom See Parts
T370224 Spade, Transverse to Boom See Parts
REFERRAL ATTACHMENTSG.R.Mfg.G.R. Manufacturing, Inc.* Kits listed below must be ordered through John Deere.* F.O.B. Trussville, Alabama* All kits include installation instructions* All warranty, repair parts, technical support and assistance, and sales supportand assistance will be the responsibility of G.R. Manufacturing, Inc., and will behandled directly between the Dealer and G.R. Manufacturing, Inc.
AT318959 Front Protection Screen for Cab (GR#704995) (26-60 CE)*Required when a Hydraulic Breaker is equipped on a Deere D-Series or Hitachi-3 Compact Excavator with a Cab.
768.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
HH60C HYDRAULIC HAMMERContinued
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
REFERRAL ATTACHMENTS Continued...AT318960 Front Protection Screen for Canopy (GR#704996) (26-50 CE)
*Required when a Hydraulic Breaker is equipped on a Deere D-Series or Hitachi-3 Compact Excavator with a Canopy.
620.00
ETN112936 Front Screen, Cab (GR#705577) (60 CE)*Required when a Hydraulic Breaker is equipped on a Deere G-Series or Hitachi-5 Compact Excavator with a Cab.
582.00
AT451135 Front Screen, Cab (GR#705753) (26-50 CE)*Required when a Hydraulic Breaker is equipped on a Deere G-Series or Hitachi-5 Compact Excavator with a Cab.
582.00
AT435404 Front Screen, Canopy (GR#705578) (35-50 CE)*Required when a Hydraulic Breaker is equipped on a Deere G-Series or Hitachi-5 Compact Excavator with a Canopy.
480.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
3
HH60C HYDRAULIC HAMMERContinued
10 September 2018US
Performance:Blows Per Minute: 500 - 1700Flow Requirements:10.6-31.7 gpm (40-120 lpm)
Kits & AccessoriesAT312692 2-inch Seat Belt with Shoulder Harness for Suspension Seat 311.00
Kits and AccessoriesAT450568 Backhoe Coupler Adapter Kit (Pin & Bushing)
For use on:310SG-SL310SL HL315SG-SL410G-L
1,038.00
T370226 Chisel See Parts
T370230 Compacting Plate See Parts
T370227 Moil Point See Parts
AT417602 Severe Duty DoorIncludes windshield wiper.For ROPS Canopy units also order AT387526.Required to meet ISO 8084 Forestry Applications.Use for D and E Series Models.S/N 269401 and below.
3,107.00
T370228 Spade, Parallel to Boom See Parts
T370229 Spade, Transverse to Boom See Parts
REFERRAL ATTACHMENTSG.R.Mfg.G.R. Manufacturing, Inc.* Kits listed below must be ordered through John Deere.* F.O.B. Trussville, Alabama
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
HH80C Hydraulic HammerContinued
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
REFERRAL ATTACHMENTS Continued...* All kits include installation instructions* All warranty, repair parts, technical support and assistance, and sales supportand assistance will be the responsibility of G.R. Manufacturing, Inc., and will behandled directly between the Dealer and G.R. Manufacturing, Inc.
AT318959 Front Protection Screen for Cab (GR#704995) (26-60 CE)*Required when a Hydraulic Breaker is equipped on a Deere D-Series or Hitachi-3 Compact Excavator with a Cab.
768.00
AT318960 Front Protection Screen for Canopy (GR#704996) (26-50 CE)*Required when a Hydraulic Breaker is equipped on a Deere D-Series or Hitachi-3 Compact Excavator with a Canopy.
620.00
ETN112936 Front Screen, Cab (GR#705577) (60 CE)*Required when a Hydraulic Breaker is equipped on a Deere G-Series or Hitachi-5 Compact Excavator with a Cab.
582.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
3
HH80C Hydraulic HammerContinued
10 September 2018US
Features:Sifting Plate7 Scarifier TeethPin-on
Specifications:78.0 in. Working Width
50.0 in. Length21.9 in. Height4.0 in. Working Depth5/8 x 6 Cutting Edge
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINE7460T LP78 LANDPLANE
For use on the following models:320E-332E SS320G-332G SS317G, 325G CTL319E-333E CTLs331G-333G CTLs110 TLB300CX, 400X/400CX Loaders**Please refer to A&T Sales Manual for other requirements
2,514.00
HYDRAULIC KITS1000 Hydraulic Kit 411.00
1001 Less Hydraulic Kit No Added Cost
DEALER-INSTALLED KITSCutting Edges
KV12758 78 in. Bolt-On Cutting EdgeRequires additional hardware; see Parts.
See Parts
Kits & AccessoriesPB750225 Box of #3 Grade 8 Plow Bolts and Nuts See Parts
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
LP78 LANDPLANEEquipment for Base Machine
10 September 2018US
Features:Sifting Plate8 Scarifier TeethPin-onSpecifications:84.0 in. Working Width50.0 in. Length
21.9 in. Height4.0 in. Working Depth5/8 x 6 Cutting Edge
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINE7470T LP84 LANDPLANE
For use on the following models:326E-332E SS330G-332G SS319E-333E CTLs325G-333G CTLs
2,733.00
HYDRAULIC KITS1000 Hydraulic Kit 411.00
1001 Less Hydraulic Kit No Added Cost
DEALER-INSTALLED KITSCutting Edges
KV12471 84 in. Bolt-On Cutting EdgeRequires additional hardware; see Parts.
See Parts
Kits & AccessoriesPB750225 Box of #3 Grade 8 Plow Bolts and Nuts See Parts
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
LP84 LANDPLANEEquipment for Base Machine
10 September 2018US
Features:Units come standard withthe pull back kit installedRubber edges are reversibleand replaceable
Applications include but notlimited to:
Manure removalFlood clean upLight snow removalAny place where pushingmaterial is neededwith a rubber edge
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINE8500T MS60 MATERIAL / MANURE SCRAPER
For use on the following models:312G-318G SS110 TLB300CX, 400X/400CX Loaders**Please refer to A&T Sales Manual for other requirements
1,617.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
MS60 MATERIAL / MANURE SCRAPEREquipment for Base Machine
10 September 2018US
Features:Units come standard withthe pull back kit installedRubber edges are reversibleand replaceable
Applications include but notlimited to:
Manure removalFlood clean upLight snow removalAny place where pushingmaterial is neededwith a rubber edge
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINE8510T MS72 MATERIAL / MANURE SCRAPER
For use on the following models:312G-324G SS318E-324E SS317G CTL110 TLB300CX, 400X/400CX Loaders**Please refer to A&T Sales Manual for other requirements
2,147.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
MS72 MATERIAL / MANURE SCRAPEREquipment for Base Machine
10 September 2018US
Features:Units come standard withthe pull back kit installedRubber edges are reversibleand replaceable
Applications include but notlimited to:
Manure removalFlood clean upLight snow removalAny place where pushingmaterial is neededwith a rubber edge
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINE8520T MS84 MATERIAL / MANURE SCRAPER
For use on the following models:318E-332E SS320G-332G SS317G-333G CTLs319E-333E CTLs
2,232.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
MS84 MATERIAL / MANURE SCRAPEREquipment for Base Machine
10 September 2018US
Features:Units come standard withthe pull back kit installedRubber edges are reversibleand replaceable
Applications include but notlimited to:
Manure removalFlood clean upLight snow removalAny place where pushingmaterial is neededwith a rubber edge
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINE8530T MS96 MATERIAL / MANURE SCRAPER
For use on the following models:318E-332E SS320G-332G SS319E-333E CTLs325G-333G CTLs
2,033.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
MS96 MATERIAL / MANURE SCRAPEREquipment for Base Machine
10 September 2018US
No Base Equipment Description
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
07A1T MH60D MULCHING HEADRequires Applicable Operator Protection Kits.Requires Applicable Severe Duty Door Kit.For optimal performance, use on non-hydraulic self-leveling machines.
For use with the following models:
330G - 332G SSL331G - 333G CTL
35,214.00
DEALER-INSTALLED KITSKits & Accessories
AT433505 Knife Tool Kit 201.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTS1
MH60D MULCHING HEADEquipment for Base Machine
10 September 2018US
No Base Equipment Description.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
0AQ0T MP66B MULTI-PURPOSE BUCKETFor use on the following models:312-324G SS318E-324E SS317G CTL
3,578.00
DEALER-INSTALLED KITSCutting Edges
AT436470 66 in. Bolt-On Cutting Edge for MP66B 352.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
Heavy Duty 45 In. Frame and Set of ForksContinued
10 September 2018US
Heavy Duty Forks - 6,200 lb.Load Capacity60 in. Wide Pallet Fork Frameand GuardUnrestricted Visibility to ForkTips48 in. Long Fork Tines Available
Fork Tine Load Capacity of 6,200lb. per PairNOTE: Rear Counterweights is NotRequired, but May EnhanceMachine Stability.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
03K1T Heavy Duty 60 in. Frame and Set of 48" ForksIncludes 60" Frame and Two Fork Set of 48" HD TinesFor:320E-324E SS320G-332G SS317G-333G CTLs323E CTL
1,348.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
Heavy Duty 60 in. Frame and Set of 48" ForksEquipment for Base Machine
10 September 2018US
Frame has option of 45 inch or60 inch width of the railsForks have options of 48inch or60 inch length of tines8800 lb. rating on forks (perpair of tines)Robust, two-piece walk-throughbrick guard
Optional bolt-on brick guard kitto complete backrestUnrestricted Visibility to ForkTips
Rear Ballast is not required butmay enhance machine stability.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
06U0T Severe Duty Pallet ForkFor:330G-332G SS331G-333G CTLs
1,545.00
PICK KIT1000 45" Severe Duty Fork Frame No Added Cost
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
Severe Duty Pallet ForkEquipment for Base Machine
10 September 2018US
Impulse Force 4,000 lbf / 17.8kNCycles/Minute at Regulated Flow2,000 rpmBase Plate Dimensions 13 x 25in. / 330 x 635 mmCompaction Area 325 in. sq. /209550 mm sq.Hydraulic Flow Range 9-14 gpm /34-53 l/minRegulated Flow 9 gpm / 34 l/min
PICK ONE1000 Less mounting bracket and hoses No Added Cost
1001 Mounting Adapter KitFor use on 26G and 30G with PC4
860.00
1002 Mounting Adapter KitFor use on 35G with PC4
882.00
DEALER-INSTALLED KITSKits & Accessories
BYT10728 Mounting Adapter Kit 860.00
BYT10828 Mounting Adapter Kit 882.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
PC4 PLATE COMPACTOREquipment for Base Machine
10 September 2018US
Impulse Force 6,400 lbf / 28.5kNCycles/Minute at Regulated Flow2,000 rpmBase Plate Dimensions 18 x 27.5in. / 460 x 700 mmCompaction Area 499 in. sq. /322000 mm sq.Hydraulic Flow Range 15-20 gpm /57-76 l/minRegulated Flow 18 gpm / 68 l/min
PICK ONE1000 Less mounting bracket and hoses No Added Cost
1003 Mounting Adapter KitFor use on 50G, 60G with PC7
920.00
DEALER-INSTALLED KITSKits & Accessories
BYT10729 Mounting Adapter Kit 920.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
PC7 PLATE COMPACTOREquipment for Base Machine
10 September 2018US
Impulse Force 8,000 lbf / 35.6kNCycles/Minute at Regulated Flow2,000 rpmBase Plate Dimensions 24 x 28in. / 610 x 710 mmCompaction Area 671 in. sq. /433100 mm sq.Hydraulic Flow Range 20-24 gpm /76-91 l/minRegulated Flow 21 gpm / 79 l/min
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
PC10 PLATE COMPACTOREquipment for Base Machine
10 September 2018US
NOTE: 12V Receptacle Kit isRequired.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
7830T PR60 ANGLE POWER RAKEFor:312G-318G SS
8,913.00
DEALER-INSTALLED KITSKits & Accessories
KV21995 12 Volt Demonstration Kit3-pin connector
314.00
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
Kits and AccessoriesAT332454 12 Volt Receptacle Kit 204.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
PR60 ANGLE POWER RAKEEquipment for Base Machine
10 September 2018US
Box End Plates:Front or Rear
Angle Control:12V Electric ActuatorRotate 20 Degrees EitherDirection From Center
Bi-Directional RakingCapability
Specifications:
72 in. Rake72 in. (1827 mm) RakingWidth81 in. (2056 mm) OperatingWidth64 in. (1625 mm) Length31 in. (787 mm) Height8.6 in. (22 mm) ToothRoller Diameter11 gpm (42 lpm) Hydraulics
KV25224 12 Volt Receptacle Kit (with Traditional Controls) (300 Series)3-pin connector
177.00
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
AT348477 Attachment Control (with E-H Joystick Controls)D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
AT348475 Attachment Control (with Foot, Hand Controls)* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
PR72B ANGLE POWER RAKEEquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT339786 Attachment Control (with Joystick Controls) (300 Series)
14-pin connector and 3-pin connector included245.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
Kits and AccessoriesAT332454 12 Volt Receptacle Kit 204.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
PR72B ANGLE POWER RAKEContinued
10 September 2018US
Box End Plates:Front or Rear
Angle Control:12V Electric ActuatorRotate 20 Degrees EitherDirection From Center
Bi-Directional RakingCapability
Specifications:
84 in. Rake84 in. (2134 mm) RakingWidth93 in. (2362 mm) OperatingWidth64 in. (1625 mm) Length32 in. (812 mm) Height8.6 in. (220 mm) ToothRoller Diameter18 gpm (68 lpm) Hydraulics
NOTE: Applicable Attachment
Control Kit is Required
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
1580T PR84B ANGLE POWER RAKEFor:318E-332E SS320G-332G SSL317G-333G CTL319E-333E CTLs
10,835.00
DEALER-INSTALLED KITSKits & Accessories
KV21995 12 Volt Demonstration Kit3-pin connector
314.00
KV25224 12 Volt Receptacle Kit (with Traditional Controls) (300 Series)3-pin connector
177.00
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
AT348477 Attachment Control (with E-H Joystick Controls)D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
AT348475 Attachment Control (with Foot, Hand Controls)* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
PR84B ANGLE POWER RAKEEquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT339786 Attachment Control (with Joystick Controls) (300 Series)
14-pin connector and 3-pin connector included245.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
PR84B ANGLE POWER RAKEContinued
10 September 2018US
Box End Plates:Front or Rear
Angle Control:12V Electric ActuatorRotate 20 Degrees EitherDirection From Center
Bi-Directional RakingCapability
Specifications:
96 in. Rake90 in. (2284 mm) RakingWidth99 in. (2513 mm) OperatingWidth64 in. (1625 mm) Length32 in. (812 mm) Height8.6 in. (22 mm) ToothRoller Diameter15 gpm (57 lpm) Hydraulics
NOTE: Applicable Attachment
Control Kit is Required
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
0265KV PR96B ANGLE POWER RAKEFor:320E-332E SS320G-332G SS319E-333E CTLs325G-333G CTLs
11,650.00
DEALER-INSTALLED KITSKits & Accessories
KV21995 12 Volt Demonstration Kit3-pin connector
314.00
KV25224 12 Volt Receptacle Kit (with Traditional Controls) (300 Series)3-pin connector
177.00
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
AT348477 Attachment Control (with E-H Joystick Controls)D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
AT348475 Attachment Control (with Foot, Hand Controls)* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
PR96B ANGLE POWER RAKEEquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT339786 Attachment Control (with Joystick Controls) (300 Series)
14-pin connector and 3-pin connector included245.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
PR96B ANGLE POWER RAKEContinued
10 September 2018US
3" Tine Spacing
The tine tips are fully gussetedon both sides for addeddurability and dependability.
The tine tips are also connected
to each other to add strength.
These buckets also incorporate afeature to hold rocks and debrisin the bucket while digging.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINE7950T R66 ROCK BUCKET
For:312G-320G SS318E, 320E SS317G CTL
1,735.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
R66 ROCK BUCKETEquipment for Base Machine
10 September 2018US
3" Tine Spacing
The tine tips are fully gussetedon both sides for addeddurability and dependability.
The tine tips are also connected
to each other to add strength.
These buckets also incorporate afeature to hold rocks and debrisin the bucket while digging.
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
RL84 ROLLER LEVELEquipment for Base Machine
10 September 2018US
Equipment for Base Machine
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
05F1T RB72 ROLLOUT BUCKETHigh Dump Rollout Bucket. For use on the following models:312G-324G SS318E-326E SS317G-325G CTLs319E-323E CTLs* With the 312GR-318G, the Boom Mounted Hose Guide Kit, BYT10477, isrecommended for proper hose routing.* With the E-series and 320G-333G, the Boom Mounted Hose Guide Kit,AT436025, is recommended.* For a replacement cutting edge, use the 72" Bolt-on Cutting Edge Kit,AT436471.
4,886.00
DEALER-INSTALLED KITSCutting Edges
AT436471 Bolt-On Cutting Edge for 72 in. Bucket 359.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
RB72 ROLLOUT BUCKETEquipment for Base Machine
10 September 2018US
Equipment for Base Machine
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
05G1T RB84 ROLLOUT BUCKETHigh Dump Rollout Bucket. For use on the following models:320G-332G SS326E-332E SS325G-333G CTLs323E-333E CTLs204K-324K CWLs* With the 312GR-318G, the Boom Mounted Hose Guide Kit, BYT10477, isrecommended for proper hose routing.* With the E-series and 320G-333G, the Boom Mounted Hose Guide Kit,AT436025, is recommended.* For a replacement cutting edge, use the 84" Bolt-on Cutting Edge Kit,AT436473.
5,153.00
DEALER-INSTALLED KITSCutting Edges
AT436473 Bolt-On Cutting Edge for 84 in. Bucket 463.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
RB84 ROLLOUT BUCKETEquipment for Base Machine
10 September 2018US
Equipment for Base Machine
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
05H1T RB96 ROLLOUT BUCKETHigh Dump Rollout Bucket. For use on the following models:330G-332G SS328E-332E SS317G-325G CTLs331E-333E CTLs204K-324K CWLs* With the 312GR-318G, the Boom Mounted Hose Guide Kit, BYT10477, isrecommended for proper hose routing.* With the E-series and 320G-333G, the Boom Mounted Hose Guide Kit,AT436025, is recommended.* For a replacement cutting edge, use the 96" Bolt-on Cutting Edge Kit,BYT10747.
5,410.00
DEALER-INSTALLED KITSCutting Edges
BYT10747 96 in. Bolt-On Cutting Edge for RB96 537.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
RR84 ROOT RAKEEquipment for Base Machine
10 September 2018US
No Base Equipment Description.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
8281T RC60B ROTARY CUTTERRequires a demolition door (Code 5201, 5203, or AT425249) or a severe-dutydoor installation (Code 5201, 5203, 5205, or AT348784).For:316G-324G SS318E-324E SS
6,172.00
WHEEL KIT1000 FRONT WHEEL KIT
Dealer-Installed782.00
1001 LESS FRONT WHEEL KIT No Added Cost
DEALER-INSTALLED KITSKits & Accessories
AT312692 2-inch Seat Belt with Shoulder Harness for Suspension Seat 311.00
AT425249 Demolition Door Kit(313, 315, CT315)2- or 3-inch Seat Belt with Shoulder Harness required.This is a roll up door.
918.00
Kits and AccessoriesAT442703 Front Wheel Kit 933.00
AT442698 Pressure Gauge KitAllows operator to monitor motor inlet pressure resulting in reduced stalling andincreased productivity.
265.00
AT417602 Severe Duty DoorIncludes windshield wiper.For ROPS Canopy units also order AT387526.Required to meet ISO 8084 Forestry Applications.Use for D and E Series Models.S/N 269401 and below.
3,107.00
AT387526 Severe-Duty Door Hardware Kit.For use with ROPS Canopy units only. Not required for cab units.Kit includes mounting hardware for the severe-duty door including the latch &striker, heavy-duty gas-spring cylinder, and windshield washer bottle.Use for D Series Models.
171.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
RC60B ROTARY CUTTEREquipment for Base Machine
10 September 2018US
No Base Equipment Description.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
8341T RC72B ROTARY CUTTERRequires a demolition door (Code 5201, 5203, or AT425249) or a severe-dutydoor installation (Code 5201, 5203, 5205, or AT348784).For:318G-332G SS320E-332E SS317G-333G CTLs323E- 333E CTLs
6,372.00
WHEEL KIT1000 FRONT WHEEL KIT
Dealer-Installed782.00
1001 LESS FRONT WHEEL KIT No Added Cost
DEALER-INSTALLED KITSKits & Accessories
AT312692 2-inch Seat Belt with Shoulder Harness for Suspension Seat 311.00
AT425249 Demolition Door Kit(313, 315, CT315)2- or 3-inch Seat Belt with Shoulder Harness required.This is a roll up door.
918.00
Kits and AccessoriesAT442703 Front Wheel Kit 933.00
AT442698 Pressure Gauge KitAllows operator to monitor motor inlet pressure resulting in reduced stalling andincreased productivity.
265.00
AT417602 Severe Duty DoorIncludes windshield wiper.For ROPS Canopy units also order AT387526.Required to meet ISO 8084 Forestry Applications.Use for D and E Series Models.S/N 269401 and below.
3,107.00
AT387526 Severe-Duty Door Hardware Kit.For use with ROPS Canopy units only. Not required for cab units.Kit includes mounting hardware for the severe-duty door including the latch &striker, heavy-duty gas-spring cylinder, and windshield washer bottle.Use for D Series Models.
171.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
RC72B ROTARY CUTTEREquipment for Base Machine
10 September 2018US
No Base Equipment Description.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
8351T RC78B ROTARY CUTTERRequires a demolition door (Code 5201 or 5203) or a severe-duty doorinstallation (Code 5201, 5203, 5205, or AT348784).For:326E-332E SS330G-332G SS317G-333G CTLs323E- 333E CTLs
6,820.00
WHEEL KIT1000 FRONT WHEEL KIT
Dealer-Installed782.00
1001 LESS FRONT WHEEL KIT No Added Cost
DEALER-INSTALLED KITSKits & Accessories
AT312692 2-inch Seat Belt with Shoulder Harness for Suspension Seat 311.00
Kits and AccessoriesAT442703 Front Wheel Kit 933.00
AT442698 Pressure Gauge KitAllows operator to monitor motor inlet pressure resulting in reduced stalling andincreased productivity.
265.00
AT417602 Severe Duty DoorIncludes windshield wiper.For ROPS Canopy units also order AT387526.Required to meet ISO 8084 Forestry Applications.Use for D and E Series Models.S/N 269401 and below.
3,107.00
AT387526 Severe-Duty Door Hardware Kit.For use with ROPS Canopy units only. Not required for cab units.Kit includes mounting hardware for the severe-duty door including the latch &striker, heavy-duty gas-spring cylinder, and windshield washer bottle.Use for D Series Models.
171.00
REFERRAL ATTACHMENTSG.R.Mfg.G.R. Manufacturing, Inc.* Kits listed below must be ordered through John Deere.
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
RC78B ROTARY CUTTEREquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
REFERRAL ATTACHMENTS Continued...* F.O.B. Trussville, Alabama* All kits include installation instructions* All warranty, repair parts, technical support and assistance, and sales supportand assistance will be the responsibility of G.R. Manufacturing, Inc., and will behandled directly between the Dealer and G.R. Manufacturing, Inc.
AT432855 Auxillary Hydraulic Line Quick Coupler Guard 220.00
AT432853 Bottom Opening Cover Plates 350.00
AT372953 Bottom Openings Cover PlatesFor use on 326D, 328D, 329D, 332D, 333D
350.00
AT372945 Exhaust Hood Opening Seal 120.00
AT432861 Exhaust Hood Opening Seal 120.00
AT372955 Front Work Lights and Rear Hood Light Guards 218.00
AT432854 Front Work Lights and Rear Light Guards 218.00
AT388939 Lift Cylinder Hose Guards 420.00
AT437325 Lift Cylinder Hose Guards 320.00
AT372949 Operator Rear Window / Side Window GuardsRequired to meet ISO 8084 Forestry ApplicationsNot recommended for use with Hazard Warning Lights
640.00
AT432858 Rear Deflector and Bumper 1,962.00
AT397455 Rear Deflectors with Bumper 1,962.00
AT372950 Toe Guard and Door Upgrade KitRequired to meet ISO 8084 Forestry Applications
492.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
RC78B ROTARY CUTTERContinued
10 September 2018US
No Base Equipment Description.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
8342T RS72 EXTREME DUTY ROTARY CUTTERRequires a demolition door (Code 5201, 5203, or AT425249) or a severe-dutydoor installation (Code 5201, 5203, 5205, or AT348784).For:326E-332E SS330G-332G SS329E-333E CTLs331G-333G CTLs
12,839.00
CARBIDE TOOTH KIT1100 CARBIDE TOOTH KIT 389.00
1101 LESS CARBIDE TOOTH KIT No Added Cost
DEALER-INSTALLED KITSKits and Accessories
AT456608 Carbide Tooth Kit 518.00
AT456609 Replacement Blade Kit 1,105.00
AT456636 Wear Plate Kit 121.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
RS72 EXTREME DUTY ROTARY CUTTEREquipment for Base Machine
10 September 2018US
Performance:Tills to a 6 in. (152 mm)DepthStandard Offset Left MakingIt Useful For All TillingJobs
R66949Y Yellow 42lb. Quik-Tatch WeightMust be ordered in quantity of 8.
61.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
SA72 SIDE DISCHARGE BUCKETEquipment for Base Machine
10 September 2018US
No Base Equipment Description
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
9110T SD72 SIDE DISCHARGE BUCKETFor:312G-324G SS318E-328E SS317G, 325G CTL319E-323E CTLs
Early model SD72 (below following s/n's) are not compatible with MF E-Seriesmachines (318, 319, 320, 323E) due to bucket interference with couplers onmachine.
R66949Y Yellow 42lb. Quik-Tatch WeightMust be ordered in quantity of 8.
61.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
SD72 SIDE DISCHARGE BUCKETEquipment for Base Machine
10 September 2018US
No Base Equipment Description
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
9120T SD84 SIDE DISCHARGE BUCKETFor:320E-332E SS320G-332G SS319E-333E CTLs325G-333G CTLs
Early model SD84 (below following s/n's) are not compatible with MF E-Seriesmachines (318, 319, 320, 323E) due to bucket interference with couplers onmachine.
1TOSD84XAB0000008
9,602.00
DEALER-INSTALLED KITSCutting Edges
KV12471 84 in. Bolt-On Cutting EdgeRequires additional hardware; see Parts.
R66949Y Yellow 42lb. Quik-Tatch WeightMust be ordered in quantity of 8.
61.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
SD84 SIDE DISCHARGE BUCKETEquipment for Base Machine
10 September 2018US
Silage Defacer allows removal ofhaylage & silage from bunkers.Open design allows for greatoperator visibility and providesadjustable guides for depth ofcut. Loosen silage whilemaintaining a smooth, compactedbunker space with the SilageDefacer. This unique toolpierces, separates, and rakes
without cutting or reducing thesize of the silage, helping toensure complete blending.Cutting Width 96.9 in. (2460.6mm)Depth of cut 0-3 inReach 7 ft.Weight 910 lb. (413 kg)Hydraulic Flow 16-25 gpm
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
03F0T AD11 SILAGE DEFACERFor use on the following models:320G-332G SS318E-332E SS325G-333G CTL319E-333E CTL
204K-324K Wheel Loader with Skid Steer Style Coupler.
5,830.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
AD11 SILAGE DEFACEREquipment for Base Machine
10 September 2018US
Silage Defacer allows removal ofhaylage & silage from bunkers.Open design allows for greatoperator visibility and providesadjustable guides for depth ofcut. Loosen silage whilemaintaining a smooth, compactedbunker space with the SilageDefacer. This unique toolpierces, separates, and rakes
without cutting or reducing thesize of the silage, helping toensure complete blending.Cutting Width 96.9 in. (2460.6mm)Depth of cut 0-3 inReach 11 ft.Weight 1037 lb. (470 kg)Hydraulic Flow 16-25 gpm
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
03G0T AD7 SILAGE DEFACERFor use on the following models:312G-332G SS318E-332E SS317G-333G CTL319E-333E CTL
204K-324K Wheel Loader with Skid Steer Style Coupler.
5,765.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
AD7 SILAGE DEFACEREquipment for Base Machine
10 September 2018US
14-21 GPM
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
9711T SB60B Snow BlowerFor:312G-318G SS317G CTL
Also must order applicable 14-Pin Connector Harness from Attachments below.
7,158.00
DEALER-INSTALLED KITSKits & Accessories
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
Kits and AccessoriesAT361655 Control Box and Harness
For use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84HThis is for units not equipped with an Attachment Control Kit.Installation Instructions T249658.
525.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
SB60B Snow BlowerEquipment for Base Machine
10 September 2018US
14-21 GPM
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
9971T SB72B Snow BlowerFor:312-324G SS318E-324E SS317G, 325G CTL319E-323E CTL204K, 304K CWLAlso must order applicable 14-Pin Connector Harness from Attachments below.
7,321.00
DEALER-INSTALLED KITSKits & Accessories
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
AT348477 Attachment Control (with E-H Joystick Controls)D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
AT348475 Attachment Control (with Foot, Hand Controls)* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
AT320590 Attachment Control (with Foot, Hand Controls) (317-332, CT322-CT332)* 14-pin connector* Includes 8-Button Control Handle
808.00
AT339786 Attachment Control (with Joystick Controls) (300 Series)14-pin connector and 3-pin connector included
245.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
Kits and Accessories
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
SB72B Snow BlowerEquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT361652 14-Pin Connector Harness (For 300-series with Traditional Controls)
For use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84HFor 300-series with 8-button handle.Also order applicable Attachment Control Kit if base unit not equipped with it.Installation Instructions T249659.
210.00
AT361654 14-Pin Connector Harness (required to connect snow blower to Skid Steer/CTLAttachment Controls)For use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84H.For 300-Series with E-H Joystick controls.For D-Series with E-H Joystick Controls.For E-Series with E-H Joystick Controls.Also order applicable Attachment Control Kit if not equipped in base unit.Installation Instructions T250796.
268.00
AT361655 Control Box and HarnessFor use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84HThis is for units not equipped with an Attachment Control Kit.Installation Instructions T249658.
525.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
SB72B Snow BlowerContinued
10 September 2018US
18-27 GPM
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
6980T SB78B Snow BlowerFor:320E-332E SS320G-332G SS319E-333E CTLs331G-333G CTLs244J CWL (must be equipped with high flow option or kit)Also must order applicable 14-Pin Connector Harness from Attachments below.
7,826.00
DEALER-INSTALLED KITSKits & Accessories
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
AT348477 Attachment Control (with E-H Joystick Controls)D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
AT348475 Attachment Control (with Foot, Hand Controls)* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
AT320590 Attachment Control (with Foot, Hand Controls) (317-332, CT322-CT332)* 14-pin connector* Includes 8-Button Control Handle
808.00
AT339786 Attachment Control (with Joystick Controls) (300 Series)14-pin connector and 3-pin connector included
245.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
Kits and Accessories
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
SB78B Snow BlowerEquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT361652 14-Pin Connector Harness (For 300-series with Traditional Controls)
For use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84HFor 300-series with 8-button handle.Also order applicable Attachment Control Kit if base unit not equipped with it.Installation Instructions T249659.
210.00
AT361654 14-Pin Connector Harness (required to connect snow blower to Skid Steer/CTLAttachment Controls)For use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84H.For 300-Series with E-H Joystick controls.For D-Series with E-H Joystick Controls.For E-Series with E-H Joystick Controls.Also order applicable Attachment Control Kit if not equipped in base unit.Installation Instructions T250796.
268.00
AT361655 Control Box and HarnessFor use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84HThis is for units not equipped with an Attachment Control Kit.Installation Instructions T249658.
525.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
SB78B Snow BlowerContinued
10 September 2018US
18-27 GPM
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
7090T SB84B Snow BlowerFor:324E-332E SS324G-332G SS323E-333E CTLs325G-333G CTLs244J CWL (must be equipped with high flow option or kit)324J CWLAlso must order applicable 14-Pin Connector Harness from Attachments below.
7,931.00
DEALER-INSTALLED KITSKits & Accessories
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
AT348477 Attachment Control (with E-H Joystick Controls)D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
AT348475 Attachment Control (with Foot, Hand Controls)* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
AT320590 Attachment Control (with Foot, Hand Controls) (317-332, CT322-CT332)* 14-pin connector* Includes 8-Button Control Handle
808.00
AT339786 Attachment Control (with Joystick Controls) (300 Series)14-pin connector and 3-pin connector included
245.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
SB84B Snow BlowerEquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...Kits and Accessories
AT361652 14-Pin Connector Harness (For 300-series with Traditional Controls)For use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84HFor 300-series with 8-button handle.Also order applicable Attachment Control Kit if base unit not equipped with it.Installation Instructions T249659.
210.00
AT361654 14-Pin Connector Harness (required to connect snow blower to Skid Steer/CTLAttachment Controls)For use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84H.For 300-Series with E-H Joystick controls.For D-Series with E-H Joystick Controls.For E-Series with E-H Joystick Controls.Also order applicable Attachment Control Kit if not equipped in base unit.Installation Instructions T250796.
268.00
AT361655 Control Box and HarnessFor use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84HThis is for units not equipped with an Attachment Control Kit.Installation Instructions T249658.
525.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
SB84B Snow BlowerContinued
10 September 2018US
No Base Equipment provided.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
9550T SB72H Snow Blower - High FlowFor:318E-324E SS320G-324G SS323E CTL325G CTLAlso must order applicable 14-Pin Connector Harness from Attachments below.
12,178.00
PICK ONE1001 Control Box and Harness (High Flow)
This is for units not equipped with an Attachment Control Kit.For:315-320 SS318D-320D SS318E-320E SS320G SSCT322 CTL323D CTL323E CTL325G CTL
536.00
1002 14-Pin Connector Harness (For 300-series with Traditional Controls)Also order applicable Attachment Control Kit if base unit not equipped with it.For:317-320 SSCT322 CTL
215.00
1003 14-Pin Connector HarnessFor 300-series with E-H Joystick Controls and D-Series with TraditionalControls or E-H Joystick Controls.Also order applicable Attachment Control Kit if base unit not equipped with itFor:318D-320D SS318E-320E SS320G SS323D CTL323E CTL325G CTL
270.00
DEALER-INSTALLED KITS
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
SB72H Snow Blower - High FlowEquipment for Base Machine
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
AT348477 Attachment Control (with E-H Joystick Controls)D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
AT348475 Attachment Control (with Foot, Hand Controls)* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
AT320590 Attachment Control (with Foot, Hand Controls) (317-332, CT322-CT332)* 14-pin connector* Includes 8-Button Control Handle
808.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
Kits and AccessoriesAT361652 14-Pin Connector Harness (For 300-series with Traditional Controls)
For use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84HFor 300-series with 8-button handle.Also order applicable Attachment Control Kit if base unit not equipped with it.Installation Instructions T249659.
210.00
AT361654 14-Pin Connector Harness (required to connect snow blower to Skid Steer/CTLAttachment Controls)For use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84H.For 300-Series with E-H Joystick controls.For D-Series with E-H Joystick Controls.For E-Series with E-H Joystick Controls.Also order applicable Attachment Control Kit if not equipped in base unit.Installation Instructions T250796.
268.00
AT361655 Control Box and HarnessFor use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84HThis is for units not equipped with an Attachment Control Kit.Installation Instructions T249658.
525.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
SB72H Snow Blower - High FlowContinued
10 September 2018US
No Base Equipment provided.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
9570T SB78H Snow Blower - High FlowFor:318E-328E SS320G-330G SS323E-333E CTLs325G-333G CTLsAlso must order applicable 14-Pin Connector Harness from Attachments below.
12,377.00
PICK ONE1001 Control Box and Harness (High Flow)
This is for units not equipped with an Attachment Control Kit.For:315-328 SS318D-328D SS318E-328E SS320G-324G SSCT322-CT332 CTLs323D-333D CTLs323E-333E CTLs325G CTL
536.00
1002 14-Pin Connector Harness (For 300-series with Traditional Controls)Also order applicable Attachment Control Kit if base unit not equipped with it.For:317-328 SSCT322-CT332 CTLs
215.00
1003 14-Pin Connector HarnessFor 300-series with E-H Joystick Controls and D-Series with TraditionalControls or E-H Joystick Controls.Also order applicable Attachment Control Kit if base unit not equipped with itFor:318D-328D SS318E-328E SS316G-332G SS323D-333D CTLs323E-333E CTLs317G-333G CTLs
270.00
DEALER-INSTALLED KITS
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
SB78H Snow Blower - High FlowEquipment for Base Machine
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
AT348477 Attachment Control (with E-H Joystick Controls)D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
AT348475 Attachment Control (with Foot, Hand Controls)* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
AT320590 Attachment Control (with Foot, Hand Controls) (317-332, CT322-CT332)* 14-pin connector* Includes 8-Button Control Handle
808.00
AT339786 Attachment Control (with Joystick Controls) (300 Series)14-pin connector and 3-pin connector included
245.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
Kits and AccessoriesAT361652 14-Pin Connector Harness (For 300-series with Traditional Controls)
For use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84HFor 300-series with 8-button handle.Also order applicable Attachment Control Kit if base unit not equipped with it.Installation Instructions T249659.
210.00
AT361654 14-Pin Connector Harness (required to connect snow blower to Skid Steer/CTLAttachment Controls)For use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84H.For 300-Series with E-H Joystick controls.For D-Series with E-H Joystick Controls.For E-Series with E-H Joystick Controls.Also order applicable Attachment Control Kit if not equipped in base unit.Installation Instructions T250796.
268.00
AT361655 Control Box and HarnessFor use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84HThis is for units not equipped with an Attachment Control Kit.Installation Instructions T249658.
525.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
SB78H Snow Blower - High FlowContinued
10 September 2018US
No Base Equipment provided.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
9600T SB84H Snow Blower - High FlowFor:326E-332E SS330G-332G SS329E-333E CTLs331G-333G CTLsAlso must order applicable 14-Pin Connector Harness from Attachments below.
13,359.00
PICK ONE1001 Control Box and Harness (High Flow)
This is for units not equipped with an Attachment Control Kit.For:325-332 SS326D-332D SS326E-332E SSCT332 CTL329D-333D CTL329E-333E CTL
536.00
1002 14-Pin Connector Harness (For 300-series with Traditional Controls)Also order applicable Attachment Control Kit if base unit not equipped with it.For:325-332 SSCT332 CTL
215.00
1003 14-Pin Connector HarnessFor 300-series with E-H Joystick Controls and D-Series with TraditionalControls or E-H Joystick Controls.Also order applicable Attachment Control Kit if base unit not equipped with itFor:326D-332D SS326E-332E SS316G-332G SS329D-333D CTLs329E-333E CTLs317G-333G CTLs
270.00
DEALER-INSTALLED KITSKits & Accessories
AT427986 Attachment ControlFor E series (models 328, 329, 332, and 333) with EH controls (0950, 0975,0980, and 0990). Includes 3-pin and 14-pin connector. Replaces existinghandles.
415.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
SB84H Snow Blower - High FlowEquipment for Base Machine
10 September 2018US
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
DEALER-INSTALLED KITS Continued...AT394637 Attachment Control (with E-H Joystick Controls without Joystick Buttons)
D Series (S/N 198376 and above)For use with E-H Controls without Joystick ButtonsFor use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connectorReplaces existing handles
460.00
AT348477 Attachment Control (with E-H Joystick Controls)D Series (S/N 198376 and above)For use with E-H Joystick Controls (0950)Includes 3-pin and 14-pin connector
260.00
AT348475 Attachment Control (with Foot, Hand Controls)* For D Series with Foot Controls (0900) or Hand Controls (0925)* Includes 3-pin and 14-pin connector* Replaces existing handles
718.00
AT320590 Attachment Control (with Foot, Hand Controls) (317-332, CT322-CT332)* 14-pin connector* Includes 8-Button Control Handle
808.00
AT339786 Attachment Control (with Joystick Controls) (300 Series)14-pin connector and 3-pin connector included
245.00
AT427985 Attachment Control KitFor E series (models 318, 319, 320, 323, and 326) with manual control with FootControls (0900) or Hand Controls (0925) OR with EH controls (0950, 0975,0980, and 0990).Includes 3-pin and 14-pin connector. Replaces existing handles.
728.00
Kits and AccessoriesAT361652 14-Pin Connector Harness (For 300-series with Traditional Controls)
For use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84HFor 300-series with 8-button handle.Also order applicable Attachment Control Kit if base unit not equipped with it.Installation Instructions T249659.
210.00
AT361654 14-Pin Connector Harness (required to connect snow blower to Skid Steer/CTLAttachment Controls)For use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84H.For 300-Series with E-H Joystick controls.For D-Series with E-H Joystick Controls.For E-Series with E-H Joystick Controls.Also order applicable Attachment Control Kit if not equipped in base unit.Installation Instructions T250796.
268.00
AT361655 Control Box and HarnessFor use with Snow Blowers SB60B, SB72B, SB78B, SB84B, SB72H, SB78H,SB84HThis is for units not equipped with an Attachment Control Kit.Installation Instructions T249658.
525.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
* With the 244J, the Worksite Pro Skid Steer Style Coupler, AT357576, isrequired.
4,799.00
DEALER-INSTALLED KITSKits & Accessories
AT357576 ISO Adapter to Quik Tatch Coupler 1,584.00
Kits and AccessoriesT250748 10 ft. Blade Extension See Parts
KV24034 10 ft. Non-Metallic Edge See Parts
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
BL10B SNOW / UTILITY BLADEEquipment for Base Machine
10 September 2018US
No Base Equipment Description
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
0BY0T BV6 SNOW V BLADEFor:312G-324G SS318E-326E SS319E-323E CTL325G CTL
AT428072 Hydraulic Quick Coupler Adapter kit is available to adapt all HIGHFLOW series SSL and CTL machines to standard flow attachment couplers.
4,572.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
BV6 SNOW V BLADEEquipment for Base Machine
10 September 2018US
No Base Equipment Description
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
0BX0T BV8 SNOW V BLADEFor:318G-332G SS318E-332E SSL317G-333G CTLs319E-333E CTL
AT428072 Hydraulic Quick Coupler Adapter kit is available to adapt all HIGHFLOW series SSL and CTL machines to standard flow attachment couplers.
4,803.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
BV8 SNOW V BLADEEquipment for Base Machine
10 September 2018US
No Base Equipment Description
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
0BW0T BV9 SNOW V BLADEFor:318G-332G SS318E-332E SSL317G-333G CTLs319E-333E CTL204-324 CWL
AT428072 Hydraulic Quick Coupler Adapter kit is available to adapt all HIGHFLOW series SSL and CTL machines to standard flow attachment couplers.
4,961.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
BV9 SNOW V BLADEEquipment for Base Machine
10 September 2018US
No Based Equipment Description
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, IA
07C1T SS30 STUMP SHREDDERFor optimal performance, use on machines equipped with High Flow Hydraulics.Requires machine equipped with a cab door.
For use with the following models:320G, 324G, 330G, 332G SSL325G, 331G, 333G CTL
21,366.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
SS30 STUMP SHREDDEREquipment for Base Machine
10 September 2018US
Hookup and quickly move tractorimplementsCategory 1&2 Hitch Rating
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINEF.O.B. Dubuque, Iowa
02C0T THREE-POINT HITCH ADAPTER 883.00
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
THREE-POINT HITCH ADAPTEREquipment for Base Machine
10 September 2018US
.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINE9020T 10 IN. STEEL TRACKS
For the following units with Heavy Duty Tires:318E-320E SSContains Chain Binder and Strap.
3,131.00
DEALER-INSTALLED KITSKits & Accessories
AT320928 2 in. Wheel Spacer Kit* For special applications when increased track clearance is required.* Allows tires to be mounted 2 inches further away from Skid Steer.
554.00
KV22838 Binder See Parts
AT351259 Bucket Offset AdapterLowers bucket approximately 2 inches.
590.00
KV22839 Strap See Parts
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
Outside Plate is Open forEasy Cleaning and LengthAdjustment
Tires must be in WidePosition when Tracks areInstalled. Wheel Spacersare NOT Required on 317-320.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINE0023KV 10 IN. STEEL TRACKS
For the following units with Heavy Duty Tires:312G-318G SSContains Chain Binder and Strap.
3,131.00
DEALER-INSTALLED KITSKits & Accessories
AT320928 2 in. Wheel Spacer Kit* For special applications when increased track clearance is required.* Allows tires to be mounted 2 inches further away from Skid Steer.
554.00
AT345942 3/4 in. Wheel Spacer Kit (Required for 313-315)* For special applications when increased track clearance is required.* Allows tires to be mounted 3/4 inches further away from Skid Steer.
1,378.00
KV22838 Binder See Parts
AT340611 Boom Stop Kit (Required for 313-315) 154.00
AT351259 Bucket Offset AdapterLowers bucket approximately 2 inches.
590.00
KV22839 Strap See Parts
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
Outside Plate is Open forEasy Cleaning and LengthAdjustment
Tires must be in WidePosition when Tracks areInstalled. Wheel Spacersare NOT Required on 320.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINE0024KV 12 IN. STEEL TRACKS / 320 & 324E
For the following units with 12 in. Heavy Duty Tires:320 SS320D SS320E/G SS324E/G SSContains Chain Binder and Strap.
3,434.00
DEALER-INSTALLED KITSKits & Accessories
AT320928 2 in. Wheel Spacer Kit* For special applications when increased track clearance is required.* Allows tires to be mounted 2 inches further away from Skid Steer.
554.00
KV22838 Binder See Parts
AT351259 Bucket Offset AdapterLowers bucket approximately 2 inches.
590.00
KV22839 Strap See Parts
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
12 IN. STEEL TRACKS / 320 & 324EEquipment for Base Machine
Outside Plate is Open forEasy Cleaning and LengthAdjustment
Tires must be in WidePosition when Tracks areInstalled. Wheel Spacersare NOT Required on 325-328.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINE0025KV 12 IN. STEEL TRACKS / 325-328 & 326D-328D
For the following units with 12 in. Heavy Duty Tires:325, 328 SS326D, 328D SS326E, 328E SSContains Chain Binder and Strap.
4,040.00
DEALER-INSTALLED KITSKits & Accessories
AT320928 2 in. Wheel Spacer Kit* For special applications when increased track clearance is required.* Allows tires to be mounted 2 inches further away from Skid Steer.
554.00
KV22838 Binder See Parts
AT351259 Bucket Offset AdapterLowers bucket approximately 2 inches.
590.00
KV22839 Strap See Parts
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
12 IN. STEEL TRACKS / 325-328 & 326D-328DEquipment for Base Machine
Outside Plate is Open forEasy Cleaning and LengthAdjustment
Tires must be in WidePosition when Tracks areInstalled. Wheel Spacersare NOT Required on 325-328.
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINE0026KV 14 IN. STEEL TRACKS
For the following units with 14 in. Heavy Duty Tires:328D and 328E (No kits required).328 Skid Steer Loaders (Requires track guard kit KV17333).332 332D, and 332E Skid Steer Loaders (Requires axle block spacer kitKV23789).Contains Chain Binder and Strap.Recommend Tire Code: 2330 14x75 17.5 12 PR SKS Extra-Wall; Other 14" tireoffers not compatible.
4,545.00
DEALER-INSTALLED KITSKits & Accessories
AT320928 2 in. Wheel Spacer Kit* For special applications when increased track clearance is required.* Allows tires to be mounted 2 inches further away from Skid Steer.
554.00
KV23789 Axle Blocks for 332 104.00
KV22838 Binder See Parts
AT351259 Bucket Offset AdapterLowers bucket approximately 2 inches.
590.00
KV22839 Strap See Parts
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
14 IN. STEEL TRACKSEquipment for Base Machine
10 September 2018US
Improves Skid Steer tractionReduces ground pressureAdds counterbalance weightTrack pitch: 10 in. (254 mm)Total number of pads: 42
Track weight: 1,066 lb. (484 kg)
CodeAttachmentIdentifier Description
WEIGHTLBS.
List PriceSuggested
USD ($)
Select One Code From Each Required Category
BASE MACHINE9021T 14 IN. STEEL TRACKS (330G & 332G)
For the following units with 14 in. Heavy Duty Tires:330G and 332G (No kits required).Contains Chain Binder and Strap.Recommend Tire Code: 2330 14x75 17.5 12 PR SKS Extra-Wall; Other 14" tireoffers not compatible.
4,683.00
DEALER-INSTALLED KITSKits & Accessories
AT320928 2 in. Wheel Spacer Kit* For special applications when increased track clearance is required.* Allows tires to be mounted 2 inches further away from Skid Steer.
554.00
KV23789 Axle Blocks for 332 104.00
KV22838 Binder See Parts
AT351259 Bucket Offset AdapterLowers bucket approximately 2 inches.
590.00
KV22839 Strap See Parts
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
14 IN. STEEL TRACKS (330G & 332G)Equipment for Base Machine
10 September 2018US
Features:Heavy Duty Planetary DriveManual Side ShiftExcellent VisibilityIndicators for ProperDigging ControlPerformance:16 to 44 gpm2000 to 3300 psi
Integral Quik-Tatch MountingFrame
NOTE: Rear Ballast is notRequired, but Will EnhanceMachine Stability DuringTransport.
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
2
TR60B TRENCHERContinued
10 September 2018US
Performance:Powered by StandardAuxiliaryHydraulicsDrum Oscillation of +/- 15Degrees66 in. (1.7 m) Smooth Drum7800 lbf (3538 kg)Dynamic Force2600 vpm @ 20 gpmFrequency
Drum Diameter 24 in.(61.0 cm)
Quik-Tatch Mounting with1/2 in. Couplers and Hoses
NOTE: Rear Ballast isRequired on the 317 & 320.Rear Ballast May EnhanceStability on Other Models.
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
VR66C SMOOTH VIBRATORY ROLLEREquipment for Base Machine
10 September 2018US
Performance:Powered by StandardAuxiliaryHydraulicsDrum Oscillation of +/- 15Degrees73 in. (1.8 m) Smooth Drum8,550 lbf (3878 kg)Dynamic Force2600 vpm @ 20 gpm
Frequency
Drum Diameter - 24 in.(61.0 cm)
Quik-Tatch Mounting with1/2 in. Couplers and Hoses
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
VR73C SMOOTH VIBRATORY ROLLEREquipment for Base Machine
10 September 2018US
Performance:Powered by StandardAuxiliaryHydraulicsDrum Oscillation of +/- 15Degrees84 in. (2.1 m) Smooth Drum9,370 lbf (4250 kg)Dynamic Force2600 vpm @ 20 gpm
Frequency
Drum Diameter - 24 in.(61.0 cm)
Quik-Tatch Mounting with1/2 in. Couplers and Hoses
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
VR84C SMOOTH VIBRATORY ROLLEREquipment for Base Machine
10 September 2018US
Performance:Powered by StandardAuxiliaryHydraulicsDrum Oscillation of +/- 15Degrees66 in. (1.7 m) Padded Drum7800 lbf (3538 kg)Dynamic Force2600 vpm @ 20 gpmFrequency
Drum Diameter less Pads -20 in. (51.0 cm)
Quik-Tatch Mounting with1/2 in. Couplers and Hoses
NOTE: Rear Ballast isRequired on the 317 & 320.Rear Ballast May EnhanceStability on Other Models.
JOHN DEERE COMMERCIAL WORKSITE PRODUCTSWORKSITE PRO ATTACHMENTS
1
VR66C PADDED VIBRATORY ROLLEREquipment for Base Machine
10 September 2018US
Performance:Powered by StandardAuxiliaryHydraulicsDrum Oscillation of +/- 15Degrees73 in. (1.8 m) Padded Drum8,550 lbf (3878 kg)Dynamic Force2600 vpm @ 20 gpm
Frequency
Drum Diameter less Pads -20 in. (51.0 cm)
Quik-Tatch Mounting with1/2 in. Couplers and Hoses