46 Standard flat spray nozzles ST / SC Standard flat spray nozzle (ST) or nozzle in cap system MULTIJET (SC). Advantages Color coding in accordance with ISO Standard 10625 Inexpensive flat spray nozzle Nozzle in cap offers - lower assembly and storage costs - simple and fast assembly Ø 14.8 4.0 11.0 8 mm AF 2.0 ST ST-C SC Nozzle size 01 – 08 Spray angle 80°, 110° Material POM, ceramic, brass on request Pressure range - SC 025 – 05: 2 – 3 – 5 bar - ST 01 – 08: 2 – 3 – 5 bar bar ISO Recommended filters 80 M 01 – 015 60 M 02 – 04 25 M 05 – 08 Droplet size Coarse – fine Width across flats 8 mm Application areas Plant protection products and growth regulators Border application can be combined with border nozzle OC (see page 84) Backpack sprayer (only ST) Crop production Ground care
2
Embed
Standard flat spray nozzles ST / SC · 2018-01-19 · 46 Standard flat spray nozzles ST / SC Standard fl at spray nozzle (ST) or nozzle in cap system MULTIJET (SC). Advantages Color
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
46
Standardflat spray nozzles ST / SC
Standard fl at spray nozzle (ST) or nozzle in cap system MULTIJET (SC).
Advantages�� Color coding in accordance with ISO Standard 10625�� Inexpensive fl at spray nozzle�� Nozzle in cap off ers- lower assembly and
storage costs- simple and fast assembly
Ø 14.8
4.0
11.0
8 mm AF
2.0ST ST-C
SC
Nozzle size01 – 08
Spray angle80°, 110°
MaterialPOM, ceramic, brass on request
Pressure range- SC 025 – 05:
2 – 3 – 5 bar- ST 01 – 08:
2 – 3 – 5 bar
bar
ISO Recommended fi lters80 M 01 – 015 60 M 02 – 04 25 M 05 – 08
Droplet sizeCoarse – fi ne
Width across fl ats8 mm
Application areasPlant protection products and growth regulators
Border applicationcan be combined with border nozzle OC (see page 84)
Backpack sprayer(only ST)
Crop production Ground care
neis
Rechteck
47
Pro
duc
t
info
rmat
ion
Spray table for standard flat spray nozzles ST / SC
Example of ordering Type + Spray angle + int’l nozzle size + Material = Order. no.SC 110° 03 (POM) = SC 110-03ST 110° 06 (POM) = ST 110-06ST 110° 06 C (ceramic) = ST 110-06 C
��Spray pressure at the nozzle tip (gauged with a diaphragm valve)
��The stated liter-per-hectare rates apply to water.
��Prior to each spraying season, verify the table data by gauging the flow rates.
��Make sure that all nozzles have the same settings.