Standalone Drybox - with humidity sensor · 2019. 7. 29. · Ondřej Stříteský Standalone Drybox - with humidity sensor VIEW IN BROWSER updated 29. 7. 2019 | published 29. 7. 2019

Ondřej Stříteský

Standalone Drybox -with humidity sensor

VIEW IN BROWSER

updated 29. 7. 2019 | published 29. 7. 2019

30 hrs

3 pcs

f

0.20 mm

k

0.40 mm

h

PLA

414 g

d

MK3/S

PRUSAPRINTERS

Summary

Next remix of Drybox for Prusa Printer Enclosure V2 - with humidity sensor.

You can place five pieces of this drybox on the top of the Prusa PrinterEnclosure V2.

Build instructions are the same as described in the article: https://blog.prusaprinters.org/dryboxes-and-alternative-spool-holders-not-only-for-multimaterial-upgrade/

3D Printers > Other Accessories

spoolholder mmu2s drybox

Print Files (.gcode) DOWNLOAD ALL FILES

7.1 MB

14.75 hrs f 0.20 mm k 0.40 mm h PLA 206.00 g d MK3/S

updated 29. 7. 2019

266.0 KB

1.17 hrs f 0.20 mm k 0.40 mm h PLA 13.00 g d MK3/S

updated 29. 7. 2019

14.2 MB

14.46 hrs f 0.20 mm k 0.40 mm h PLA 195.00 g d MK3/S

updated 29. 7. 2019

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

670.5 KBupdated 29. 7. 2019

179.6 KBupdated 29. 7. 2019

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-ShareAlike

standalone_drybox_prusa-withsensor_02mm_pla_mk3.gcode

tray_drybox_prusa_enclosure_v2-withsensor_02mm_.gcode

top_drybox_prusa_enclosure_v2-withsensor_02mm_p.gcode

standalone_drybox_prusa_enclosure_v2-withsensor.stl

standalone_drybox_prusa-withsensor.3mf

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed ✔ | Commercial Use ✔ | Free Cultural Works ✔ | Meets Open Definition