STAINLESS STEEL FANS - axongroup.com

STAINLESS STEEL FANS

[email protected]

Almeco produces most of the fans in its range also in stainless steel.

This type of industrial fan allows many applications for which a standard steel fan would not be suitable.

Their increased resistance to corrosion and aggressive cleaning makes them particularly interesting for use, especially in the agri-food and pharmaceutical sectors where the development of bacteria is prohibited.

The range is very wide:

• Axial fans :

The ADK serie with direct drive and short casing.The long ADL variant for in-duct mounting.The AVK type with its suction cone.The ADD model for roof mounting.The ADB execution with motor out of air flow.The ADR version with belt drive.

• Low, medium or high pressure centrifugal fans.

• Combination also possible with an ATEX version.

The customer has different possibilities regarding the elements of the construction:

• Stainless steel design of the casing / housing, possibly only the parts in contact with the air flow.

• Stainless steel design of the impeller / turbine.

• Execution of the drive shaft or motor in stainless steel.

For specific projects, it is always possible to manufacture custom-made fans according to the customer’s needs.

STAINLESS STEEL FANS

www.almeco.eu

Centrifugal fans

Axial fans

OUR RANGE OF STAINLESS STEEL PRODUCTS

[email protected]

Services for industrial fans• Balancing

• Vibration measurements and analysis

• Noise measurements

• Replacing components, entire impellers or fans, and accessories

• Maintenance and repairs: on-site or in our own workshop

• Optimisation of fans

• Upgrades

Industrial fans and blowersWe have a wide range of industrial fans and blowers: from small axial and centrifugal fans for standard applications to large custom-made fans for use in the most demanding environments. Our range includes axial and centrifugal fans, axial impellers, roof fans, smoke & heat extract fans, blowers and ATEX-executions.

Our solutionsAlmeco is the reliable partner for fans, drying systems and cooling towers. With our customer, we look for the most efficient solution, either a standard or a custom-made product. Moreover, we provide service and maintenance on existing products. We are specialist in water cooling towers: both delivering new towers as revamping, maintenance and water treatment. At Almeco, we also produce and distribute various types of industrial fans. We know all about drying systems based on air knife technology. Engineering and design are done with constant striving for safety and quality improvement.

Rue de la Royenne, 51B-7700 Mouscron

T 0032 (0)56 85 40 80F 0032 (0)56 85 40 81

OUR OTHER BUSINESS UNITS:

• fluid cooling systems

• drying solutions

• water treatment

• air treatment

• automation

Your contact person:Aurélien Delescluse