STAINLESS STEEL - Alro Steel - Since · PDF file9-6 GRADE 410 410 is a martensitic stainless steel that is air or oil hardened and responds well to hardening and emt pering operationsCons
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
9-1
STAINLESS STEEL
TECHNICAL DATA and APPLICATIONS Grade 201 ................................................................................9-2 Grade 303 and 303 G&P .........................................................9-3 Grade 304 and 304L ................................................................9-4 Grade 316L and 316L BSQ .....................................................9-5 Grade 410 ................................................................................9-6 Grade 416 and 416 PSQ .........................................................9-7 Grade 420 ................................................................................9-8 Grade 430 ................................................................................9-9 Grade 440C ...........................................................................9-10 Grade 17-4 PH (630), 17-4 G&P and 17-4 H900 G&P ..........9-11
TYPICAL APPLICATIONSCommercial and residential food service applications, architectural end uses such as handrails and support frame work, washing machines, hose clamps, sinks, containers and structural components of truck trailers and railcars.
TYPICAL ANALYSIS 201 Chrome 16.00 - 18.00 Nickel 3.50 - 5.50 Carbon . .15 MAX. Manganese 5.50 - 7.50 Silicon 1.00 MAX. Sulphur . .030 MAX Phosphorus .060 MAX Nitrogen .250 MAX Iron BalanceMECHANICAL PROPERTIES (ANNEALED) BRINELL HARDNESS 175 TENSILE–KSI 105 YIELD–KSI 45 ELONGATION IN 2"-% 58 RED. IN AREA-% MIN 88WELDING CHARACTERISTICS Very goodMACHINING COMPARED TO B1112 SCREW STOCK 45%SPECIFICATIONS 201 (SHEET) ASTM A240
GRADE 201201 alloy is a high performance austenitic stainless steel formulated to have a lower and more stable cost due to the substitution of manganese for a portion of the nickel used in 300 series stainless steels such as Type 304. In addition, the chemical composition of alloy 201 provides higher annealed mechanical properties than type 304 which can result in an additional benefit of weight reduction. The 201 tensile strength is about 10% higher than Type 304 which may allow for thinner gauges and therefore less material. However, due to the lower Chromium and Nickel content, Type 201 stainless may not have the same corrosion resistance as Type 304.
GRADE 303303 is a free-machining variation of 304. The ad dition of sulfur for better machinability makes this a favorite for use in automatic screw machines. Corrosion resistant to atmo-spheric exposures, as well as a wide range of chemicals; most dyes, foods and nitric acid.
Alro SteelMetals • Industrial Supplies • Plastics
(888) 888-ALRO 2 5 7 6
alro.com
Contact us today and learn more about The Alro Difference!
GRADE 304/304LThe most widely used of the austenitic grades, 304 of fers good corrosion resistance to many chemicals and in dustrial atmospheres. Generally considered non-magnetic, it can become slightly magnetic when cold-worked. 304 is non-hardenable by heat treatment. In 304L, the carbon content has been lowered to .03% max. for corrosion resistance at heat affected zones from welding.
TYPICAL APPLICATIONSArchitectural trim, beer barrels, cryogenic vessels, dairy equipment, and a wide variety of most food applications.
TYPICAL ANALYSIS 304 304L Chrome 18.00-20.00 18.00-20.00 Nickel 8.00-11.00 8.00-11.00 Carbon .08 MAX. .03 MAX. Manganese 2.0 MAX. 2.0 MAX. Silicon 1.0 MAX. 1.0 MAX. Molybdenum Other MECHANICAL PROPERTIES (ANNEALED) BRINELL HARDNESS 170 160 TENSILE–KSI 85 75 YIELD–KSI 34 30 ELONGATION IN 2"-% 60 60 RED. IN AREA-% MIN 70 –WELDING CHARACTERISTICS Very good - tough welds MACHINING COMPARED TO B1112 SCREW STOCK 45%SPECIFICATIONS AISI 304 (BAR) 304L (BAR)
GRADE 316L316L is an austenitic chrome nickel steel with su perior corrosion resistance to that of other chrome nickel steels. Widely used when exposed to chemical corrodents, as well as marine atmospheres. 316L is generally considered non-magnetic, but can become magnetic when cold worked. In 316L, the carbon content has been lowered to .03% max. for corrosion resistance at heat affected zones from welding.
TYPICAL APPLICATIONSAcetic acid compounds, kettles for cooking catsup, pulp and paper processing equip-ment, water softener tanks, and many marine applications.
TYPICAL ANALYSIS 316L Chrome 16.00-18.00 Nickel 10.00-14.00 Carbon .03 MAX. Manganese 2.00 MAX. Silicon 1.00 MAX. Molybdenum 2.00-3.00 Other MECHANICAL PROPERTIES (ANNEALED) BRINELL HARDNESS 160 TENSILE—KSI 75 YIELD—KSI 30 ELONGATION IN 2"-% 60 RED. IN AREA-% MIN —WELDING CHARACTERISTICS Very good - tough weldsMACHINING COMPARED TO B1112 SCREW STOCK 45%SPECIFICATIONS AISI 316L (BAR) ASTM A276, A479, A580 AMS 5653 QQS 763 AISI 316L (SHEET/PLATE) ASTM A240 AMS 5507
GRADE 410410 is a martensitic stainless steel that is air or oil hardened and responds well to hardening and tempering operations. Considered a 12% chromium steel, it offers superb combinations of strength and toughness depending on degree of heat treatments. In the annealed condition, it is a ready choice for forming and cold heading.
TYPICAL APPLICATIONSMachined parts, pump shafts, bushings, mining machinery, screws, valves, cutlery, oil burner parts and hardware.
GRADE 416416 is a martensitic chromium steel to which ele ments have been added to enhance the machinability. 416 is the most readily machinable of all the stain less steels and is suitable for use in automatic screw machines. 416 is less corrosion resistant than the chrome-nickel steels. It is magnetic in all conditions.
TYPICAL APPLICATIONSAircraft fittings, bolts, nuts, studs, rivets, screws, many nonseizing and nongalling applications.
GRADE 420420 is a martensitic chrome steel capable of hardening to a maximum of approxi-mately 500 Brinell. It has its optimum corrosion resisting qualities in the hardened and tempered condition. 420 is magnetic in all conditions.
GRADE 430430 is a ferritic chrome steel with better heat and corrosion resistance than that of Type 410 or 416, but less than that of the chrome nickel types. 430 is magnetic in all conditions.
GRADE 440C440C is a martensitic chrome steel that is capable of acquiring, upon heat treatment, the highest hardness of any type of corrosion resisting steels. It has its opti mum cor-rosion resisting qualities in the hardened and tempered condition and is magnetic in all conditions.
TYPICAL APPLICATIONSInstrument bearings, nozzles, steel balls and seats for oil well pumps, valve parts.
Technical Data and Ap-plicationsGRADE 17-4 PH (630)/17-4 G&P/17-4 H900 G&P
17-4 is a martensitic precipitation hardening (maraging) steel that combines high strength and hard ness with excellent corrosion resistance. A simple one-step aging treatment in the range of 900 to 1150 degrees hardens the alloy to its design strength levels.
STAINLESS SHEETCold Rolled, Annealed & Pickled Finishes: • 2B Paper Interleaved & Laser Film, 1 Side • #4 Laser Film, 1 Side • #8 Laser Film, 1 SideFor Technical Data see pp. 9-2 thru 9-11.
AISI 201 304 304L 316L
Gage Size Weight Est. Weight (Nom. Dec) (inches) (lbs./sq. ft.) Sheet 7 ga 48 x 96 7.871 251.87 (.1874) 48 x 120 7.871 314.80 48 x 144 7.871 377.80 60 x 96 7.871 314.84 60 x 120 7.871 393.55 60 x 144 7.871 472.26 72 x 96 7.871 377.80 72 x 120 7.871 472.26 72 x 144 7.871 566.71 8 ga 48 x 96 7.014 224.44 (.1644) 48 x 120 7.014 280.56 60 x 120 7.014 350.70 60 x 144 7.014 420.84 10 ga 36 x 96 5.670 136.08 (.1350) 36 x 120 5.670 170.10 48 x 96 5.670 181.44 48 x 120 5.670 226.80 48 x 144 5.670 272.16 60 x 96 5.670 226.80 60 x 120 5.670 283.50 60 x 144 5.670 340.20 72 x 96 5.670 272.16 72 x 120 5.670 340.20 72 x 144 5.670 408.24 11 ga 36 x 96 5.050 121.20 (.1200) 36 x 120 5.050 151.50 36 x 144 5.050 181.80 48 x 96 5.050 161.60 48 x 120 5.050 202.00 48 x 144 5.050 242.40 60 x 96 5.050 202.00 60 x 120 5.050 252.50 60 x 144 5.050 303.00 72 x 96 5.050 242.40 72 x 120 5.050 303.00 72 x 144 5.050 363.60
Continued on next page
Special length sheets available. Inquire with your Alro sales representative
STAINLESS SHEETCold Rolled, Annealed & Pickled Finishes: • 2B Paper Interleaved & Laser Film, 1 Side • #4 Laser Film, 1 Side • #8 Laser Film, 1 SideFor Technical Data see pp. 9-2 thru 9-11.
Continued on next page
12 ga 36 x 96 4.420 106.08 (.1054) 36 x 120 4.420 132.60 36 x 144 4.420 159.12 48 x 96 4.420 141.44 48 x 120 4.420 176.80 48 x 144 4.420 212.16 60 x 96 4.420 176.80 60 x 120 4.420 221.00 60 x 144 4.420 265.20 72 x 96 4.420 272.16 72 x 120 4.420 265.20 72 x 144 4.420 318.24 13 ga 48 x 96 3.780 120.96 (.0900) 48 x 120 3.780 151.20 48 x 144 3.780 181.44 14 ga 36 x 96 3.155 75.72 (.075) 36 x 120 3.155 94.65 36 x 144 3.155 113.58 48 x 96 3.155 100.96 48 x 120 3.155 126.20 48 x 144 3.155 151.44 60 x 96 3.155 126.20 60 x 120 3.155 157.75 60 x 144 3.155 189.30 72 x 96 3.155 151.44 72 x 120 3.155 189.30 72 x 144 3.155 227.16 16 ga 36 x 96 2.520 60.48 (.060) 36 x 120 2.520 75.60 36 x 144 2.520 90.72 48 x 96 2.520 80.64 48 x 120 2.520 100.80 48 x 144 2.520 120.96 60 x 96 2.520 100.80 60 x 120 2.520 126.00 60 x 144 2.520 151.20 72 x 96 2.520 120.96 72 x 120 2.520 151.20 72 x 144 2.520 181.44
STAINLESS SHEETCold Rolled, Annealed & Pickled Finishes: • 2B Paper Interleaved & Laser Film, 1 Side • #4 Laser Film, 1 Side • #8 Laser Film, 1 SideFor Technical Data see pp. 9-2 thru 9-11.
18 ga 36 x 96 2.020 48.48 (.048) 36 x 120 2.020 60.60 36 x 144 2.020 72.72 48 x 96 2.020 64.64 48 x 120 2.020 80.80 48 x 144 2.020 96.96 60 x 96 2.020 80.80 60 x 120 2.020 101.00 60 x 144 2.020 121.20 20 ga 36 x 96 1.512 36.28 (.036) 36 x 120 1.512 45.36 36 x 144 1.512 54.43 48 x 96 1.512 48.38 48 x 120 1.512 60.48 48 x 144 1.512 72.57 60 x 96 1.512 60.48 60 x 120 1.512 75.60 60 x 144 1.512 90.72 22 ga 36 x 96 1.260 30.24 (.030) 36 x 120 1.260 37.80 36 x 144 1.260 45.36 48 x 96 1.260 40.32 48 x 120 1.260 50.40 48 x 144 1.260 60.48 60 x 96 1.260 50.40 60 x 120 1.260 63.00 24 ga 36 x 96 1.008 24.19 (.024) 36 x 120 1.008 30.24 48 x 96 1.008 32.25 48 x 120 1.008 40.32 48 x 144 1.008 48.38 26 ga 36 x 96 .756 18.14 (.018) 36 x 120 .756 22.68 48 x 96 .756 24.19 48 x 120 .756 30.24 48 x 144 .756 36.29
Special length sheets available. Inquire with your Alro sales representative
STAINLESS SHEETCold Rolled, Annealed and PickledFinish: Bright AnnealedFor Technical Data see pp. 9-2 thru 9-11.
AISI 430
Gauge Size Weight Est. Weight (Nom. Dec) (inches) (lbs/Sq. ft.) Sheet 11 ga (.1200) 48 x 120 5.050 202.00 12 ga (.1054) 48 x 120 4.420 176.80 14 ga (.0751) 36 x 120 3.155 92.70 48 x 120 3.155 126.20 16 ga (.0595) 36 x 120 2.450 73.50 48 x 120 2.450 98.00 60 x 120 2.450 126.00 18 ga (.0480) 36 x 120 2.020 60.60 48 x 120 2.020 80.80 20 ga (.0355) 36 x 120 1.512 45.36 48 x 120 1.512 60.48 22 ga (.030) 48 x 120 1.211 48.40 24 ga (.024) 48 x 96 .968 30.97 48 x 120 .968 38.72
Ask your Alro Sales Representative about the PROCESSING SERVICES
available at Alro Steel including:• Flame Cutting• Waterjet Cutting• Tube Laser Cutting• Shearing• Grinding• Press Brake/Forming• Thermal Processing
Shearing is offered at most Alro facilities. Alro will shear your sheets for handling or to your specified dimensions which gets you steps closer to your finished product.
Special length sheets available. Inquire with your Alro sales representative
4 x 1-3/4 x 1/4 6.055 4 x 2 x 1/4 6.484 5 x 2-1/2 x 1/4 8.200 6 x 1.90 x .343 8.300 6 x 3 x 1/4 10.140 8 x 4 x 3/8 20.000
STAINLESS ANGLEHot Rolled, Annealed and Pickled20' - 24' Random Lengths
AISI 304 304L 316L ASTM A276 A276 A276 FEDERAL QQS-763
3 x 2 x 3/16 3.070 3 x 2 x 1/4 4.100 3 x 3 x 3/16 3.710 3 x 3 x 1/4 4.900 3 x 3 x 3/8 7.200 3 x 3 x 1/2 9.550 3-1/2 x 3-1/2 x 1/4 5.800 3-1/2 x 3-1/2 x 3/8 8.650 4 x 3 x 1/4 5.800 4 x 3 x 3/8 8.500 4 x 4 x 1/4 6.600 4 x 4 x 3/8 9.800 4 x 4 x 1/2 12.800 5 x 3 x 3/8 9.850 5 x 5 x 1/4 8.895 5 x 5 x 3/8 12.802 6 x 4 x 3/8 12.300 6 x 6 x 1/4 10.755 6 x 6 x 3/8 15.551
3/4 x 3/4 x 1/8 .590 1 x 1 x 1/8 .800 1 x 1 x 3/16 1.160 1 x 1 x 1/4 1.490 1-1/4 x 1-1/4 x 1/8 1.010 1-1/4 x 1-1/4 x 3/16 1.480 1-1/4 x 1-1/4 x 1/4 1.920 1-1/2 x 1-1/2 x 1/8 1.230 1-1/2 x 1-1/2 x 3/16 1.800 1-1/2 x 1-1/2 x 1/4 2.340 2 x 2 x 1/8 1.650 2 x 2 x 3/16 2.440 2 x 2 x 1/4 3.190 2 x 2 x 3/8 4.700 2-1/2 x 2-1/2 x 3/16 3.070 2-1/2 x 2-1/2 x 1/4 4.100 2-1/2 x 2-1/2 x 3/8 5.900
Size Pounds (inches) (per ft.)
Size Pounds (inches) (per ft.)
Size Pounds (inches) (per ft.) 1-1/2 x 3/4 x 1/8 1.200 2 x 1 x 3/16 2.650 2 x 1 x 1/4 3.080 3 x 1-3/8 x 3/16 3.533 3 x 1-1/2 x 3/16 3.703 3 x 1-1/2 x 1/4 4.784
Size Pounds (inches) (per ft.)
STAINLESS CHANNELType 304/304L, Rolled or Extruded20' Random Lengths
inches inches inches inchesHR S 3 x 5.7 3.00 .170 2.330 .260HR S 4 x 7.7 4.00 .193 2.663 .293HR S 6 x 12.5 6.00 .232 3.332 .359 Laser Fused d tw bf tf
inches inches inches inchesLC W 6 x 12 6.03 .230 4.000 .280 LC W 6 x 15 5.99 .230 5.990 .260 LC W 6 x 20 6.20 .260 6.020 .365LC W 8 x 15 8.11 .245 4.015 .315 LC W 8 x 18 8.14 .230 5.250 .330 LC W 8 x 31 8.00 .285 7.995 .435
STAINLESS BEAMSType 304/304L 20' Random Lengths ASTM A276ASME A279FEDERAL QQS-763
bf
tf
Ask your sales representative about our tight tolerance saw cutting capabilities
Our Processing Services Produce:• Tighter tolerances which can reduce or eliminate machine time
• Square, near burr-free cuts for reduced machining clean-up
• Surface Finish with a Low Ra (Roughness Average)
Your Product Cut To Precision...Squareness... Surface Finish...Length...
Tube Laser ProcessingAlro’s 6-Axis Tube Lasers offer a One Step Solution to Eliminating Costly Processes
• Ability to miter cut, tap, notch, pipe joints, slot holes, tabs, etching and more • Reduces the need for sawing, fixturing, milling, drilling, punching, bending & welding • Dramatically reduce assembly time • High quality cut and parts repeatability
Contact us today
888-888-ALRO 2 5 7 6
Equipment Capability Grades Bevel Round Tube Carbon Carbon Steel 1/2” Min - 16” Max 3/4” Wall Max 45 Degree MaxTube Laser Square Tube Stainless Steel Stainless Steel 1/2” Min - 10” Max 3/8” Wall Max 20 Degree Max Rectangular Tube Aluminum Aluminum 10” x 8” Max 1/4” Wall Max 0 Degree I-Beam/WF Beam Channel/Angle 7/8” (min) - 6” (max)
CAD PrintsAlro has a fully integrated CAD Department to handle most file types: Preferred: dxf dwg iges asm prt dft par psm pwd step Also Accepted: X_B X_T prt sat model iam stp ipt dgn asm prt sldasm sldprt stl
STAINLESS STEEL BAR TOLERANCESStainless Rounds (CF)Drawn, Turned or Centerless Ground
SpecifiedSize(inches) Over(inches) Under(inches) 1/8 up to 5/16 0.001 0.001 5/16 up to1/2 0.0015 0.0015 1/2 up to 1 0.002 0.002 1 up to 1-1/2 0.0025 0.0025 1-1/2 up to 4 0.003 0.003
STAINLESS ROUNDS (RT) Rough Turned
SpecifiedSize(inches) Over(inches) Under(inches) over 2 to 2-1/2 0.031 0.000 over 2-1/2 to 3-1/2 0.046 0.000 over 3-1/2 to 4-1/2 0.062 0.000 over 4-1/2 to 5-1/2 0.078 0.000 over 5-1/2 to 6-1/2 0.125 0.000 over 6-1/2 to 8 0.156 0.000 over 8 to 12 0.187 0.000 over 12 0.218 0.000
STAINLESS HEX AND SQUARES (CF)
SpecifiedSize(inches) Over(inches) Under(inches) 1/8 up to 5/16 0.000 0.002 5/16 up to 1/2 0.000 0.003 1/2 thru 1 0.000 0.004 Over 1 to 2 0.000 0.006 Over 2 to 3 0.000 0.008 Over 3 0.000 0.010 4 to 4-1/2 +.0310 / +.0510 4-1/2 to 6 +.0310 / +.0650 6 to 6-3/8 +.0520 / +.0820 6-3/8 to 6-5/8 +.0520 / +.0930 6-5/8 and up +.0625 / +.1250
Thickness Width Length Flatness (inches) (inches) (inches) Tolerances under 3/16 thru 48 up to 96 1/8 under 3/16 thru 48 over 96 1/4 under 3/16 over 48 thru 96 1/4 under 3/16 over 48 over 96 1/4•Flatness is defined as maximum deviation from a horizontal flat surface.
STAINLESS STEEL PLATE TOLERANCESThickness Tolerancefor Stainless and Heat Resisting Steels
Specified Width(inches) Thickness Over 84 (inches) Thru 84 thru 120 3/16 up to 3/8 +.045 / –.010 +.050 / –.010 3/8 up to 3/4 +.055 / –.010 +.060 / –.010 3/4 up to 1 +.060 / –.010 +.065 / –.010 1 up to 2 +.070 / –.010 +.075 / –.010 2 up to 3 +.125 / –.010 +.150 / –.010 3 up to 4 +.175 / –.010 +.210 / –.010 4 up to 6 +.250 / –.010 +.300 / –.010 6 up to 8 +.350 / –.010 +.420 / –.010 8 thru 10 +.450 / –.010 +.540 / –.010
Flatness Tolerancefor Annealed Stainless and Heat Resisting Steel Plate Flatness Tolerance for Thickness & Widths Specified Width(inches) Thickness Up thru Over 48 60 up to 72 up to 84 thru (inches) 48 up to 60 72 84 96 3/16 up to 1/4 3/4 1-1/16 1-1/4 1-3/8 1-5/8 1/4 up to 3/8 11/16 3/4 15/16 1-1/8 1-3/8 3/8 up to 1/2 1/2 9/16 11/16 3/4 15/16 1/2 up to 3/4 1/2 9/16 5/8 5/8 13/16 3/4 up to 1 1/2 9/16 5/8 5/8 3/4 1 up to 1-1/2 1/2 9/16 9/16 9/16 11/16 1-1/2 up to 4 3/16 5/16 3/8 7/16 1/2 4 thru 6 1/4 3/8 1/2 9/16 5/8•Flatness is defined as maximum deviation from a horizontal flat surface.
Sheared and Edged Order Thickness Permitted Variation Permitted VariationA (inches) in Thickness (inches) in Width (inches) Over Under Width up to 4" Widths Over 4" Over Under Over Under 1/8 Over 0.114 to 0.130 0.010 0.010 0.094 0.031 0.094 0.094 3/16 - 3/8 0.050 0.010 0.094 0.031 0.094 0.094 3/8 - 3/4 0.060 0.010 0.094 0.031 0.094 0.094
Permitted Variations Permitted Variations In Thickness For In Width Tolerance Thicknesses Given Over and Under (inches) (inches) 1/8 thru Over 1/2 Over 1 Width (inches) 1/2 thru 1 thru 2 Over Under Up thru 1 +/-.008 +/-.010 — .015 .015 Over 1 thru 2 +/-.012 +/-.015 +/-.031 .031 .031 Over 2 thru 4 +/-.015 +/-.020 +/-.031 .062 .031 Over 4 thru 6 +/-.015 +/-.020 +/-.031 .093 .062 Over 6 thru 8 +/-.016 +/-.025 +/-.031 .125 .156 Over 8 thru 10 +/-.021 +/-.031 +/-.031 .156 .187
Angular +/-2"Corner Radii 1/4" or lessLeg Radii 1/4" or lessTransverse Flatness .010" per inch of width, .050" max.
Length Up to 12' incl. To 3" wide section Over 3" to 6" incl. + 3/16 - .0 Over 6" + 1/4 - .0 Over 12' To 3" wide section + 3/16 - .0 Over 3" to 6" incl. + 1/4 - .0 Over 6" + 5/16 - .0
CamberCamber or bow tolerances shall not exceed 0.025 in. [0.60mm] x length in ft. [ m/3 ]
Twist Width of Section Rise in 5 ft. 1/2" to 1-1/2" incl. .125" Over 1-1/2" to 4" incl. .188" Over 4" .250"
STAINLESS STEEL BAR TOLERANCESAngles
Leg Tolerance (Length) +/- 1/8"Weight Tolerance +/- 7-1/2% Right Angle Tolerance +/- 2° Straightness or Camber 1/8" in 5'
Normal Wall Thickness O.D. Tolerance Wall Round Thickness Tolerance Tolerance (inches) (inches) (inches) (%) 5/8 to 1 incl 0.035 to 0.062 + or - 0.005 + or - 10% 5/8 to 1 incl Over 0.062 + or - 0.010 + or - 10% Over 1 to 1-1/2 incl 0.035 to 0.062 + or - 0.008 + or - 10% Over 1 to 1-1/2 incl Over 0.062 + or - 0.010 + or - 10% Over 1 to 2-1/2 incl Over 0.035 + or - 0.012 + or - 10% Over 2-1/2 to 3-1/2 incl Over 0.049 + or - 0.020 + or - 10% Over 3-1/2 to 5 incl Over 0.049 + or - 0.025 + or - 10% Over 5 Over 0.083 + or - 0.030 + or - 10%
STAINLESS SQUARE & RECTANGULAR TUBE TOLERANCES
Largest Nominal O.D. Tolerance Wall Outside Diameter Concavity or Convexity Tolerance (inches) (inches) (%) To 1-1/4 incl. + or - 0.015 + or - 10% Over 1-1/4 to 2-1/2 incl. + or - 0.020 + or - 10% Over 2-1/2 to 5-1/2 incl. + or - 0.030 + or - 10% Over 5-1/2 + or - 0.060 + or - 10%
Tube Laser ProcessingAlro’s 6-Axis Tube Lasers offer a One Step Solution to Eliminating Costly Processes
• Ability to miter cut, tap, notch, pipe joints, slot holes, tabs, etching and more • Reduces the need for sawing, fixturing, milling, drilling, punching, bending & welding • Dramatically reduce assembly time • High quality cut and parts repeatability
Thickness Tolerance Carbon Stainless Aluminum (inches) (inches) Steel Steel Sheet/Plate20ga - 1/2” +/- 1/32” X X X>1/2” - 1” +/- 1/16” X X X
Alro SteelMetals • Industrial Supplies • Plastics
Alro’s Plasma Cutting System provides tighter tolerances, minimizes machining on finished parts and provides greater part accuracy.O2 Plasma means a smaller, heat affected zone and reduced edge cracking when forming.PC-based control technology increases control in shape cutting.Our cutting system can burn materials at up to 300” per minute on a 16’ x 50’ bed. The result is large volume projects completed with virtually no downtime. Advantages include: • High quality edge cuts • Higher precision than conventional plasma • Minimal clean up • Smaller kerf than conventional plasma • Small heat affected zone • Low cost per foot of cut
Plasma Capabilities
Inquire on minimum hole capability.Inquire on all red metals capabilities.
• Capable of cutting 2” thick carbon plate with less than 1 degree bevel• Ability to adjust for bevel greater than 1 degree• Can cut “K” bevels in 3/8” plate and up to 52 degree bevel in 2” plate• HPR 400 Plasma torch (400 amp)• 5 Axis bevel head• Machining center with 2” hole capacity in 2” plate.