stack a bookshelf onto a dresser, or a dresser onto lifespace€¦ · Other pieces of furniture besides the beds can also be stacked. As indicated in the photos, you can stack a bookshelf

Welcome! Meet the next generation of tech friendly furniture.

Take a moment to explore the possibilities.

lifespace ™

Make sure to place safety pins in each side of the furniture and align with the holes of the top frame.

• SmartBar with universal Mount Bracket

• Wire management behind SmartBar

Other IdeasOther pieces of furniture besides the beds can also be stacked. As indicated in the photos, you can stack a bookshelf onto a dresser, or a dresser onto another dresser or a bookcase onto a bookcase. Simply place pins at pinhole locations to connect the two pieces of furniture.

SmartBar Accessories

The Brill CompanyPhone: 866.896.6420 www.brillcompany.com

• SmartBar™ with Speaker Stand

There are some options designed into your bed that you might not be aware of. As shown below, your bed frame is reversible. It can be flip-flopped to be whatever height you like. The mattress will lay on either side of the platform. For extra storage under your lower bed, you might want the longest bedposts facing towards the floor; to have your bed lower, place the shortest bed posts towards the floor.

LOFT Configuration1. Place desk with attached desktop i-Trek where you want one end of your loft to be.

Bunk Bed Configuration

2. Place dresser approximately where the other end of your loft will be.

3. Place pins in the pinholes on top of the dresser. Then place your bookcase on top the dresser, making sure you align bookcase pinholes with the pins in the dresser top.

4. Place the bed frame on top of the other furniture. Make sure you have removed the mattress from the bed frame to make lifting easier and safer.

5. In the loft configuration, you can achieve two different heights for your bed: A. Lowest Height - bed frame directly on the supporting furniture. B. Highest Height - shorter ends of the bedposts down, line up the pinholes along the head and foot board horizontal stretchers with the pins you have placed in the tops of the bookcase and the desktop SmartBar.

6. Make sure to use the available ladder to get up and down safely from your loft.

1. Remove the mattresses from your beds for easier and safer lifting. Place one bed frame on the floor where you would like to have your bunk bed. Position the bed so the shortest bedposts are closest to the floor.2. Before setting the second bed onto the first, place one pin in each of the lower bed bedposts, so the two beds will be securely aligned with one another.

3. Position the second bed on top of the first with the longest bedpost pointing down towards the floor. Install optionalsafety rail in the side rail of the upper bunk facing the room using four 5/16” x 50 mm threaded bolts.

4. Check to be sure the pins are firmly connecting the two beds together at each bedpost.

5. Now you can put your mattresses back on the beds and arrange your other furniture in your room as you like.

Pins

Pins

Trundled Configuration1. Choose either a bookcase or dresser and place it so that it can support the foot of the other bed.

2. Form the corner of the configuration by placing the lower frame with

Single Bed Configuration

Make sure to place safety pins in each side of the furniture.

Make sure to place safety pins in each side of the furniture and align with the holes of the top frame.

Bed Post PinChest/Bookcase Pin

Pins

shortest posts pointing towards the floor.3. Place two pins on top of the dresser or bookcase and two pins on the bed post and trundle post opposite.4. Move upper bed into Trundle position with longest posts pointing down.