21 Detector Slide Push Rotary Power Dual-in-line Package Type 21 Surface mount type, two-way detection with body thickness of 1.9mm 1.9mm-thick Two-way Operation Type SPVT Refer to P.71 for soldering conditions. ■ Typical Specifications Items Specifications Rating (max.) / (min.) (Resistive load) 50mA 20V DC / 100BA 3V DC Contact resistance (Initial / After operating life) 500mΩ max. / 1Ω max. Operating force 0.4N max. Operating life Without load 100,000cycles With load 100,000cycles (50mA 20V DC) Product Line Poles 1 1 2 3 4 1 2 3 5 6 7 SPVT110102 SPVT130101 SPVT120101 SPVT140101 SPVT110201 SPVT130201 SPVT120201 SPVT210101 SPVT230101 SPVT220102 1 Positions For PC board (Reflow) Terminal type Left Right Operating direction Location lug Drawing No. With both sides With a right side With a left side Without With With Side terminal Product No. 10,000 2,500 With both sides With a right side With a left side With both sides With a right side With a left side 8 SPVT240101 Without 5 SPVT210201 With both sides 6 SPVT230201 With a right side 7 SPVT220201 With a left side Without Without Export Japan Minimumorder unit(pcs) Unit:mm Reel size Packing Specifications Taping Number of packages (pcs.) Tape width (mm) Export package measurements (mm) 1 reel 1 case /Japan 1 case /export packing 2,500 5,000 10,000 16 417×409×139 Circuit Diagram Water-proof Type General- purpose Type
5
Embed
SPVT 1.9mm-thick Two-way Operation Type · 21 Detector Slide Push Rotary Power Dual-in-line Package Type Surface mount type, two-way detection with body thickness of 1.9mm SPVT 1.9mm-thick
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
21
Detector
Slide
Push
Rotary
Pow
erD
ual-in-lineP
ackage T
ype
21
Surface mount type, two-way detection with body thickness of 1.9mm
1.9mm-thick Two-way Operation Type SPVT
Refer to P.71 for soldering conditions.
■ Typical Specifications
Items Specifications
Rating (max.)/(min.)(Resistive load) 50mA 20V DC / 100BA 3V DC
Note ● Indicates applicability to all products in the series.
71
Detector
Slide
Push
Rotary
Pow
erD
ual-in-lineP
ackage T
ype
71
Water-proof
TypeG
eneral-purpose Type
Example of Reflow Soldering Condition1. Heating method: Double heating method with infrared heater.2. Temperature measurement: Thermocouple φ0.1 to 0.2 CA (K) or CC (T) at soldering portion (copper foil surface). A heat resisting tape should be used for fixed measurement.3. Temperature profile
300
200
100
A max.
B
ED
Time (s)
CPre-heating F max.
Roomtemperature
Tem
pera
ture
(˚C
)
SPPB
260
230
40
35
40
180 150 120
SPPW8
SPVE
250
SSCQ
250
SPVN
SPVL
SPVM
SPVS
SPVT
SSCM
SPVR
Series (Reflow type) A(℃)3s max. B(℃) C(s) D(℃) E(℃) F(s)
SPVQC
1. The condition mentioned above is the temperature on the mounting surface of a PC board. There are cases where the PC board's temperature greatly differs from that of the switch, surface depending on the PC board's material, size, thickness, etc. The above-stated conditions shall also apply to switch surface temperatures.2. Soldering conditions differ depending on reflow soldering machines. Prior verification of soldering condition is highly recommended.